Add explicit padding before launch_time so xsk_tx_metadata has the same
layout on 32-bit and 64-bit systems.
On several architectures (csky, i386, nios2, m65k, openrisc, sh), the old
native 32-bit layout put launch_time at offset 12 and had a natural size of
20 bytes. Using sizeof(struct xsk_tx_metadata) as tx_metadata_len was already
rejected because the length must be a multiple of eight, so the
straightforward use of the interface was broken on those ABIs. Userspace
could still register a padded length of 24 bytes, though; mixing the old and
new layouts then silently reads launch_time from the wrong offset and
misprograms packet launch times. This intentionally replaces that
incompatible layout because the affected architectures are unlikely to
have any notable users. (x86_64 and arm64 have the most users and are _not_
affected)
Fixes: ca4419f15a ("xsk: Add launch time hardware offload support to XDP Tx metadata")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260819160535.1472459-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking updates from Jakub Kicinski:
"One of the 'small improvements all over the place' releases for us.
It's hard to draw any direct comparisons because summer vacations
disrupted our patch processing (and presumably - generation) quite a
bit.
Quick and dirty count suggests we (Paolo and I) merged a very similar
number of net (632) and net-next (648) patches. This is not telling
the full story either because 1/3 to 1/2 of the net-next patches also
*seem* like AI-driven low priority fixes, cleanups and clarifications.
We are completely overwhelmed, of course. The glimmer of hope is that
we secured sufficient LLM budget and access (thank you Meta!) to run
reviews with multiple frontier models on each patch. This eliminates
some hallucinations. That said, in terms of review, the LLMs can only
do so much.
The sad truth is that our APIs (especially for rare events like PCIe
errors, timeouts etc) have always been racy, and now LLMs don't let us
ignore that. I expect our direction for the next release will be to
tweak the reviews a little bit more, but start shifting focus to
letting the LLMs take care of the busy work - managing patchwork,
automating common process complaints, editing commit messages, and
maybe applying patches which already got "reviewed-by" tags from
people we trust...
Core & protocols:
- A few steps lowering rtnl_lock dependence:
- per-netns netdev unregistration for select SW drivers (e.g.
veth, ipvlan, tunnels)
- rtnl_lock-less FIB rule changes (RTM_NEWRULE and RTM_DELRULE)
- prepare software drivers and TC qdiscs for rtnl_lock-less GET
- Support BIG TCP (>64kB TSO) in UDP tunnels (vxlan, geneve)
- Support buffers larger than PAGE_SIZE in devmem zero-copy API
- Improve MPTCP handling of extreme memory pressure handling, when
out-of-order queue had to be pruned
- Report the per-group user count via RTM_GETMULTICAST
- Expose the route deletion reason in RTM_DELROUTE
- Add a SO_RIGHTS_NOTRUNC option to UNIX sockets to enable more
useful handling of LSM denials when receiving SCM_RIGHTS messages:
instead of truncating the message at the first blocked fd, keep
every fd slot and store the LSM errno in the blocked slot
- IPv6 Segment Routing - support looking up the post-encap SID
(address) in a different/specified routing table
- Support PRP RedBox (interlink) creation
- Support per-nexthop UDP dst port in VXLAN
- Continue converting getsockopt callbacks in a number of protocols
to iov_iter
Ethernet:
- Merge initial CXL support for AMD/Solarflare NICs (shared branch
with the CXL tree)
- New drivers:
- ADIN1140 10BASE-T1S MACPHY
- Initial skeleton of Intel iXD and ZTE Dinghai drivers
- High-speed NICs:
- AMD/Pensando:
- support firmware flashing
- Cisco (enic):
- SR-IOV V2 admin channel and MBOX protocol
- Huawei (hns3):
- support for ethtool pfc_prevention_tout
- nVidia/Mellanox:
- support sharing bandwidth control across interfaces
of the same device
- Marvell (octeontx2-pf):
- link RQ page pools to netdev for Netlink stats
- Google vNIC:
- XDP metadata support for DQ RDA
- Microsoft vNIC:
- support forcing full-page RX buffers
- Other NICs:
- Synopsys IP:
- eic7700: support for eth1
- Microchip (lan743x):
- support for RMII interface
- Wangxun:
- support for ethtool -G and -C for VFs
- add Tx timeout and PCIe error handling
- Intel (igb/igc):
- RSS key get/set support
- support for forcing link speed without auto-negotiation
- Switches:
- NXP (dpaa2):
- support bonding/LAG offload
- Mediatek:
- mt7530: EN7528 support
- initial support for MT7628
- Micrel (ksz8/9):
- refactoring work to move towards library model
- PTP support for KSZ8463
- nVidia/Mellanox:
- support rtnl-lock-less ethtool callbacks
- Realtek:
- rtl8366rb: use generic RTL83xx code
- support SGMII and HSGMII for RTL8367S
- PHYs:
- Airoha:
- EcoNet EN7528 PHY support
- DAPU Telecom
- DAPU Telecom DAP8211R(I) Gigabit PHY support
- Realtek:
- support RTL8261C_CG
- support RTL8261D
Wireless:
- nl80211: per-link statistics support for multi-link operation
- mac80211: AQL/airtime-fairness support for multicast
- Merge Peripheral Authentication Service (PAS) / TEE support for
ath12k (shared branch with the firmware/qcom tree)
- New drivers:
- mm81x for Morse Micro Long-Range S1G devices
- nxpwifi for NXP devices (mostly forked off from mwifiex)
- Driver changes:
- Broadcom (brcmfmac):
- DPP support, some Cypress part update
- MediaTek (mt76):
- mt7928 support
- mt7925 NAN support
- mt7996 AP powersave improvements
- Qualcomm (ath12k):
- much kernel infrastructure integration work
- AHB platform MultiPD support
- Realtek (rt89):
- LED support
- RTL8922DE support
- dual-BT coex for RTL8922D
- Intel:
- new FW version support
Bluetooth:
- HCI: add support for Shorter Connection Interval (SCI) feature
- af_bluetooth: add minimal context analysis annotations
- Driver changes:
- Intel:
- add Bluetooth SAR revision 2 support
- add vendor_reset PCI sysfs for PLDR
- Mediatek:
- add USB IDs for MT7902 and MT7922 devices
- Realtek:
- add USB IDs for 8761CU and 8852BE devices
- NXP:
- add M.2 Bluetooth device support using pwrseq
Misc:
- DPLL support for manual/numerical oscillator control (NCO)
(implement in zl3073x)
- MCTP support for MCTP over USB v1.1 (DMTF DSP0283)
- Power-over-Ethernet: support Realtek PSE controllers
- Remove the IBM EHEA driver
- Remove tulip/xircom_cb driver"
* tag 'net-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1433 commits)
net/mlx5e: do not HW-GRO coalesce small frames
net: openvswitch: fix nf_connlabels leak in ovs_ct_init
net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs()
net: openvswitch: fix flow mask use-after-free on flow deletion
sctp: stop processing a packet once its association is deleted
dpll: zl3073x: add PTP clock support
dpll: zl3073x: add channel ToD, phase step and TIE operations
dpll: zl3073x: scale poll interval proportionally to timeout
ptp: vmclock: prevent read-only mappings from becoming writable
ipv4: reject undersized MTUs in ip_do_fragment()
bonding: initialize err for empty target lists
net: dsa: initial support for MT7628 embedded switch
net: dsa: initial MT7628 tagging driver
net: phy: mediatek: add phy driver for MT7628 built-in Fast Ethernet PHYs
dt-bindings: net: dsa: add MT7628 ESW
net: pse-pd: realtek-pse-mcu: add UART transport
net: pse-pd: realtek-pse-mcu: add I2C transport
net: pse-pd: add Realtek PSE MCU core
dt-bindings: net: pse-pd: add bindings for Realtek PSE MCU
vsock: use sock_error() to consume sk_err after a failed connect
...
Pull bpf updates from Daniel Borkmann:
"Major changes:
- Redesign the verifier error reporting: failures now carry source
and instruction annotations along with the causal event history
that led to them, making program rejections far easier to debug and
repair (Kumar Kartikeya Dwivedi)
- Add arena argument support to kfuncs and struct_ops through the new
__arena and __arena__nullable suffixes (Tejun Heo, Puranjay Mohan,
Kumar Kartikeya Dwivedi, Ihor Solodrai)
- Signed BPF program loader rework to accommodate both BPF and
security community needs where the kernel runs the signature
verification at BPF_PROG_LOAD time before the LSM admission hook
(Daniel Borkmann)
- Add a set of ksock kfuncs which let BPF LSM and syscall programs
create, connect and send on UDP sockets in order to emit telemetry
data (Mahe Tardy)
- Unify helper and kfunc call argument verification and classify
kfunc arguments purely from BTF into a generated bpf_func_proto
which is computed once at add-call time (Amery Hung)
Other features and fixes:
- Enable EXECMEM_ROX_CACHE for BPF allocations on x86 (Mike Rapoport)
- Add bidirectional VLAN support to bpf_fib_lookup() through the new
BPF_FIB_LOOKUP_VLAN and BPF_FIB_LOOKUP_VLAN_INPUT flags (Avinash
Duduskar)
- Infer zext_dst from static register liveness analysis to fix 32-bit
zero-extension semantics, and remove the artificial limitations on
pointer types eligible for spilling (Eduard Zingerman)
- Inline the numeric open-coded iterator kfuncs so that bpf_for()
loops no longer pay a kfunc call on every iteration (Puranjay
Mohan)
- Add an arena-based bitmap data structure to libarena along with
serial and parallel selftests (Emil Tsalapatis)
- Teach resolve_btfids to discover kfuncs from the kernel's BTF ID
sets and to emit kfunc BTF decl tags, reducing the kernel build's
dependency on pahole features (Ihor Solodrai)
- Add BPF_F_ADJ_ROOM_DECAP_* flags to bpf_skb_adjust_room() so that
tunnel decapsulation can update the GSO and encapsulation state of
the skb (Nick Hudson)
- Fix the ring buffer pending_pos walk and the available-data
accounting on 32-bit position wrap (Israel Téllez García)
- Add memory usage accounting for arena maps and fix an mmap_lock
deadlock on arena lock failure (Jiayuan Chen)
- Add tracing_multi link info support to the kernel UAPI and bpftool,
and refactor the stack map code to run with preemption disabled
(Jiri Olsa)
- Support BPF_F_EGRESS in bpf_redirect_peer() to emit the skb in the
egress direction of the target's peer device (Jordan Rife)
- Add a KF_SPINLOCK_SAFE kfunc flag so that providers, in particular
modules, can declare kfuncs safe to call under bpf_spin_lock
instead of relying on the verifier's hard-coded allowlist (Kaitao
Cheng)
- Introduce global percpu data for BPF programs with libbpf probing
and bpftool skeleton support, and stop exposing uninitialized
kernel heap memory when copying per-CPU map values (Leon Hwang)
- Add s390 JIT support for load-acquire and store-release
instructions (Maxim Khmelevskii)
- Fix a CFI mismatch in the task work callback and an arm64 KASAN
false positive after bpf_throw() (Mykyta Yatsenko)
- Reject writes through untrusted BTF pointers and bound the
rdonly/rdwr_buf_size kfunc arguments (Nicholas Dudar)
- Invalidate RCU pointers only after the final spin unlock and
account for preempt and IRQ disabled regions as overlapping RCU
protection (Ning Ding)
- Support mixing bpf2bpf calls and tail calls on RV64, add signed
operations and 32-bit atomics to the RV32 JIT, and add timed
may_goto support (Pu Lehui, Kuan-Wei Chiu, Feng Jiang)
- Fix a use-after-free on mm_struct in bpf_find_vma() for foreign
tasks and an mmap_lock leak in the irq_work path (Sanghyun Park)
- Populate mmap-able BPF array map memory lazily which makes mmap()
O(1) instead of proportional to the map size (Song Liu)
- Introduce a jit_required flag and reject programs with inlined
helpers when no JIT is available, where the interpreter would
otherwise jump into an invalid address (Tiezhu Yang)
- Fix the x86 JIT per-CPU address resolution into an extended
register where the REX prefix dropped the high destination register
bit (Vineet Gupta)
- Reject MEM_ALLOC BTF accesses past object bounds, arena frees below
the arena base, and mixed arena and ordinary atomic paths (Yiyang
Chen)
- Fix the trampoline handling of 128-bit arguments and of return
values larger than 8 bytes (Yonghong Song)
- Ensure that any fault prone load is rewritten with exception table
handling, and fix the arena load-acquire and atomic fetch handling
in the x86, arm64, riscv and s390 JITs (Daniel Borkmann)
- Many more fixes and cleanups across the verifier, arena,
trampolines, sockmap, cgroup, ring buffer, x86/arm64/riscv/s390
JITs, libbpf, bpftool, resolve_btfids and selftests"
* tag 'bpf-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (373 commits)
selftests/bpf: Add tests for a store on a fault prone qdisc pointer
selftests/bpf: Add tests for fault prone loads out of RCU pointers
selftests/bpf: Add tests for pointer type merge at a shared load
selftests/bpf: Remove duplicate copies of the arena spinlock qnodes
selftests/bpf: Retry stat generation in cgroup_iter_memcg
selftests/bpf: Test pseudo-function policy diagnostics
bpf: Distinguish function references in policy diagnostics
bpf: Preserve source attribution without source text
selftests/bpf: Test kfunc argument diagnostics
bpf: Correct kfunc argument diagnostics
bpf: Use canonical stack argument names in diagnostics
bpf: Preserve R0 lineage across helper calls
selftests/bpf: Exercise negative optlen in cgroup getsockopt hook
bpf: Reject negative optlen in cgroup getsockopt hook
selftests/bpf: tc_tunnel - validate decap GSO and encapsulation state
bpf: Clear decap state on skb_adjust_room shrink path
bpf: Allow new DECAP flags and add guard rails
bpf: Add BPF_F_ADJ_ROOM_DECAP_* flags for tunnel decapsulation
bpf: Refactor masks for ADJ_ROOM flags and encap validation
bpf: Name the enum for BPF_FUNC_skb_adjust_room flags
...
Pull locking updates from Ingo Molnar:
"Futexes:
- Use runtime constants for futex_hash computation (K Prateek Nayak,
Peter Zijlstra)
- Optimise the size check get_futex_key() (Sebastian Andrzej Siewior)
- Avoid private hash use-after-free on final put (Felix Hoffmann)
- Tell kmemleak we're not leaking __futex_queues (Peter Zijlstra)
Rust integration updates:
- Implement refcounted interrupt disable and SpinLockIrq for Rust
(Boqun Feng, Heiko Carstens, Joel Fernandes, Lyude Paul)
- Rust sync: add helpers for mb, dma_mb and friends; add generic
memory barriers and use LKMM atomics instead of Rust atomics in the
revocable code (Gary Guo)
- Add abstraction and integrate synchronize_rcu() (Philipp Stanner)
Lock debugging:
- Add qspinlock contended_release tracepoint (Dmitry Ilvokhin, Peter
Zijlstra)
- Enable the printing of held locks of remote running tasks and print
task CPU (Ingo Molnar)
- percpu-rwsem: Annotate intentional data race in readers_active_check()
(Sun Shaojie)
Misc fixes and updates by Boqun Feng, Peter Zijlstra, Fangrui Song,
Naveen Kumar Chaudhary and Thomas Huth"
* tag 'locking-core-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
rust: sync: Introduce SpinLockIrq::lock_with() and friends
rust: sync: Add SpinLockIrq
rust: sync: Use super::* in spinlock.rs
rust: helper: Add spin_{un,}lock_irq_{enable,disable}() helpers
rust: Introduce interrupt module
s390/preempt: Enable HAS_SEPARATE_PREEMPT_RESCHED_BITS
arm64: sched/preempt: Enable HAS_SEPARATE_PREEMPT_RESCHED_BITS
preempt: Introduce HAS_SEPARATE_PREEMPT_RESCHED_BITS
sched: Avoid signed comparison of preempt_count() in __cant_migrate()
sched: Remove the unused preempt_offset parameter of __cant_sleep()
locking: Switch to _irq_{disable,enable}() variants in cleanup guards
irq: Add KUnit test for refcounted interrupt enable/disable
irq,spin_lock: Add counted interrupt disabling/enabling
openrisc: Include <linux/cpumask.h> in smp.h
preempt: Introduce __preempt_count_{sub,add}_return()
preempt: Introduce HARDIRQ_DISABLE_BITS
preempt: Track NMI nesting to separate per-CPU counter
futex: Tell kmemleak we're not leaking __futex_queues
x86/paravirt: Trace contended_release on unlock
tracing/lock: Use TRACE_EVENT_FN() for contended_release
...
Pull objtool updates from Ingo Molnar:
- Fix various klp-build bugs reported by Joe Lawrence (Josh Poimboeuf,
Joe Lawrence)
- Misc fixes and cleanups (Puranjay Mohan, Thomas Huth and Ingo Molnar)
* tag 'objtool-core-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool/klp: Fix vmlinux klp relocations for EXPORT_SYMBOL_FOR_MODULES()
objtool/klp: Fix .kcfi_traps special section extraction
objtool/klp: Fix vmlinux .klp.symid link error for .exitcall.exit symbols
objtool/klp: Fix line numbers in Module.symvers parse errors
objtool/klp: Fix relocations for EXPORT_SYMBOL_FOR_MODULES() symbols
objtool/klp: Allow new references to module exports
objtool/klp: Don't match local symbols against exports
objtool/klp: Fix cross-module klp relocation section naming
objtool/klp: Explicitly disallow patching or referencing init code/data
objtool/klp: Ignore replacement offset of empty x86 alternatives
objtool/klp: Fix size of empty special section entries
objtool/klp: Fix vmlinux .klp.symid link error for .no_trim_symbol symbols
objtool/headers: Sync tools/include/linux/objtool_types.h with include/linux/objtool_types.h
objtool: Replace __ASSEMBLY__ with __ASSEMBLER__ in header files
objtool/klp: Fix symbol resolution for duplicate data symbols
objtool/klp: Add .klp.symid for sympos disambiguation
objtool/klp: Skip hidden directories when finding objects
objtool/klp: Fix false module dependencies caused by dead relocs
objtool/klp: Normalize Module.symvers paths to module names
objtool/klp: Fix module name normalization for paths with dots
Pull arm64 updates from Will Deacon:
"There's a reasonable amount of stuff here, including a bunch of
updates to the perf PMU drivers and some MPAM updates to expose the
memory bandwidth counters via resctrl.
On the architecture side, some highlights include support for BBML3
and steps towards support for an architectural NMI solution, all
wrapped up in a web of fixes for latent issues identified by Sashiko.
ACPI:
- Combine reads of AMU counters into a single FFH feedback counter op
Confidential computing:
- Fix smp_processor_id() in preemptible context when retrieving an
attestation token inside a realm
- Convert pKVM over to a "CC platform"
- Clean-up our SWIOTLB configuration in preparation for reworking the
handling of encrypted/decryped DMA buffers in the dma-mapping tree
CPU errata handling:
- Work around broken device memory ordering on NVIDIA Olympus cores
- Fix broken 'nospectre_bhb' command-line option
- Select the idle loop backend instruction on the command-line
CPU features:
- Replace our BBML2-noabort feature with the new architectural BBML3
feature
- Disable in-kernel BTI for recent versions of Clang due to issues
with livepatch that are still being investigated
- Clean-up documentation describing which ID register fields are
exposed to userspace
Interrupts:
- Preliminary work towards supporting FEAT_NMI, which cleans up our
IRQ entry code and fixes some latent issues with pseudo-NMI
- Support for an SDEI backend to trigger an NMI backtrace
Memory management:
- Treat all devices as coherent when CLIDR_EL1.LoC == 0
- Fix no-map handling of sub-page-sized regions
- Second attempt at unmapping the linear aliases of the kernel data
and bss sections
- Fix EFI runtime calls when software-PAN is enabled
Miscellaneous:
- Add Mark Rutland as a reviewer!
- Tidy-up our futex cmpxchg logic when using the new LSUI
instructions
- Drop the requirement on DYNAMIC_FTRACE_WITH_CALL_OPS when
selecting HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
- Fix a false-positive KCSCAN splat in the delay loop
- Use a portable typedef for 128-bit scalar types in our UAPI headers
- Non-critical fixes for Sashiko reports all over
MPAM:
- Hook MPAM memory bandwidth counters into resctrl's counter
assignment interface
- Fix a quirk in the MPAM bandwidth counting on Nvidia T241 so that
it also applies to 63 bit counters
Perf:
- Workarounds for hardware issues in the CMN-S3 PMU (Graviton 5) and
CPU PMU (NVIDIA Olympus again!)
- Add support for the DDR PMU on Marvell CN20K SoCs
- Add support for Picoheart implementations of the DCW PCIe PMU
- Add support for Channel/Rank/Bank filtering in the CXL PMU driver
- Add support for 64-bit counters in the CSPMU device
- Add support for revision 2 of the CMN S3 PMU
Ptrace:
- Fix a decade-old bug in our handling of seccomp and tracing on
syscall entry
- Fix regset handling for inactive SVE and SSVE registers
Selftests
- Add some tests for the decade-old bug that we just tried to fix in
our syscall entry path
- Fix SVE test crash on SME-only CPUs"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (95 commits)
arm64/efi: Avoid voluntary preemption with efi_mm installed
arm64: bti: Disable in-kernel BTI with recent versions of Clang
arm64: entry: Avoid unnecessary local_irq_disable() on kernel exit
irqchip/gic-v3: make the unmasking of pseudo-NMIs explicit when handling IRQs
arm64: Disable KCSAN instrumentation in delay.o
arm_mpam: Disable driver unbind to avoid UAF
arm_mpam: Fix a NULL pointer dereference on unbinding after an error interrupt
perf: arm_pmuv3: Zero initialize hw_id branch stack field
arm64: mm: Unmap kernel data/bss entirely from the linear map
iommu/arm-smmu-v3-sva: Use system_supports_bbml3() to detect CPU feature
perf/arm-cmn: Support CMN S3 r2
perf/arm-cmn: Plumb in new filter types
perf/arm-cmn: Refactor event filter data
perf/arm-cmn: Refactor event filter programming
perf/arm-cmn: Rename filter variables for clarity
arm64: mm: fix accidental linear mapping of no-map reserved memory
tools: Ensure tools copy of linux/filter.h exports the UAPI
kselftest/arm64: Fix abi test compilation errors
arch: arm64: add early_param idle=<wfi|yield|nop>
arm64: entry: mask DAIF before returning from C EL1 handlers
...
Pull nolibc updates from Thomas Weißschuh:
- New architecture: Alpha
- New library functionality: readlink(), getcwd()
- Various bugfixes and cleanups
* tag 'nolibc-20260814-for-7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc:
tools/nolibc: add support for Alpha
tools/nolibc/powerpc: mark ctr and xer as clobbered by system call
tools/nolibc: remove dead __ARCH_WANT_SYS_OLD_SELECT
selftests/nolibc: add debug information
tools/nolibc: mark arg1 operand in __nolibc_syscall0() as write-only
selftests/nolibc: Add test for getcwd() and readlink()
tools/nolibc: unistd: Add readlink()
tools/nolibc: unistd: Add getcwd()
Pull fscrypt updates from Eric Biggers:
"The main change this cycle is a significant simplification that's been
overdue for a while now: standardizing on a single file contents
encryption implementation in ext4 and f2fs, instead of having two.
Specifically, the original filesystem-layer file contents encryption
implementation is removed, and the blk-crypto implementation is now
used unconditionally. blk-crypto delegates either to inline crypto
hardware or to the CPU via blk-crypto-fallback. The latter is
functionally equivalent to the original filesystem-layer code.
The blk-crypto implementation already existed, but previously it was
used only when the filesystem was mounted with "-o inlinecrypt". Now,
"-o inlinecrypt" just selects whether inline crypto hardware is used.
To allow maintaining that user control over hardware use, the
blk-crypto API is extended with a new flag BLK_CRYPTO_CFG_ALLOW_HW.
Overall, this removes quite a bit of redundant code from ext4, f2fs,
and fs/crypto/. It should make things easier for ongoing filesystem
efforts such as iomap support, large folios, and btrfs encryption
(btrfs had already been planning to use blk-crypto exclusively.)
There are two small behavior changes of note:
- Direct I/O now works on encrypted files even without "-o inlinecrypt",
rather than falling back to buffered I/O. This is effectively a
bugfix, though I'll continue to keep an eye out for any user that
may have been depending on the buffered I/O fallback.
- IV_INO_LBLK_32 policies are no longer supported in certain cases
that didn't make sense and have no known uses.
This has been in linux-next since July 22 with no reported issues. All
encryption xfstests pass on ext4 and f2fs. As usual I've also been
using it on a system with an fscrypt-encrypted home directory. Of
course, the blk-crypto code paths also aren't new and were already
being used on many systems via the inlinecrypt mount option.
In addition to the main change described above, there are a few other
cleanups such as using lock guards for mutexes, improving
documentation, and removing a workaround for outdated gcc versions"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux: (29 commits)
blk-crypto: Update docs for blk-crypto-fallback motivation
blk-crypto: Remove unused function blk_crypto_config_supported()
fscrypt: Update docs for data path
fscrypt: Remove unused function fscrypt_finalize_bounce_page()
f2fs: Update outdated comment in f2fs_write_begin()
fs: Update outdated comment for SB_INLINECRYPT
fscrypt: Update encryption policy version docs
fscrypt: Replace some variable-size memsets with fixed-size
fscrypt: Add safety checks to non-block-based en/decryption
fscrypt: Merge bio.c and inline_crypt.c into block.c
fscrypt: Remove unused functions and workqueue
fscrypt: Remove fs-layer zeroout code
fscrypt: Remove fscrypt_dio_supported()
fscrypt: Replace calls to fscrypt_inode_uses_inline_crypto()
fs/buffer: Remove fs-layer decryption code
f2fs: Remove fs-layer file contents en/decryption code
ext4: Further de-generalize the bio postprocessing code
ext4: Make ext4_bio_write_folio() return void
ext4: Remove fs-layer file contents en/decryption code
Documentation: fscrypt: Update docs for inlinecrypt
...
Pull failfs filesystem from Christian Brauner:
"Add failfs and expose a FD_FAILFS_ROOT sentinel.
This allows userspace to shed their filesystem state completely. A
process with its root or working directory in failfs must anchor every
path lookup at an explicit file descriptor. Absolute paths, absolute
symlinks and AT_FDCWD-relative lookups simply fail.
Failfs is the counterpart to nullfs. nullfs says adds a permanently
empty, immutable directory whose lookups fail with ENOENT but which
can be opened, read, stat'd and mounted upon. Failfs on the other hand
fails every operation. The root cannot be opened at all. A single
instance is mounted during early boot via kern_mount(), which makes it
logically distinct from every mount namespace.
This is accompanied by a new fchroot() system call which makes
chrooting via a file descriptor a first class concept. It's possible
to chroot into failfs as an unprivileged user provided the task has no
new privileges set"
* tag 'vfs-7.3-rc1.failfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
Documentation: add failfs documentation
selftests/filesystems: add failfs selftests
arch: hookup fchroot() system call
fs: support FD_FAILFS_ROOT in fchroot()
fs: add fchroot()
fs: support FD_FAILFS_ROOT in fchdir()
fs: add failfs
Add new bpf_skb_adjust_room() decapsulation flags:
- BPF_F_ADJ_ROOM_DECAP_L4_GRE
- BPF_F_ADJ_ROOM_DECAP_L4_UDP
- BPF_F_ADJ_ROOM_DECAP_IPXIP4
- BPF_F_ADJ_ROOM_DECAP_IPXIP6
These flags let BPF programs describe which tunnel layer is being
removed, so later changes can update tunnel-related GSO state
accordingly during decapsulation.
This patch only introduces the UAPI flag definitions and helper
documentation.
Co-developed-by: Max Tottenham <mtottenh@akamai.com>
Co-developed-by: Anna Glasgall <aglasgal@akamai.com>
Signed-off-by: Max Tottenham <mtottenh@akamai.com>
Signed-off-by: Anna Glasgall <aglasgal@akamai.com>
Signed-off-by: Nick Hudson <nhudson@akamai.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/bpf/20260812083115.73100-4-nhudson@akamai.com
Sync up the kernel and tooling headers to fix this build warning:
Warning: Kernel ABI header at 'tools/include/linux/objtool_types.h' differs from latest version at 'include/linux/objtool_types.h'
Fixes: 6e5716b187 ("objtool: Replace __ASSEMBLY__ with __ASSEMBLER__ in header files")
Cc: Thomas Huth <thuth@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add the IFF_BACKPRESSURE flag to the UAPI header and to its tools/ copy.
The flag has no effect yet, it is the opt-in switch for the qdisc
backpressure logic added by the following patches.
It is added to TUN_FEATURES only in the last patch of the series, once the
implementation is complete. Until then TUNSETIFF silently masks it off, as
it does for any flag outside TUN_FEATURES.
Keeping the flag and its users in separate patches would either leave a
window where backpressure is unconditional, or make the opt-in a later
add-on. Adding the flag first lets every following patch be a no-op
unless it is set.
Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
Link: https://patch.msgid.link/20260803183641.96882-2-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Normally when there is an include/foo.h and an include/uapi/foo.h the
non-UAPI copy includes the UAPI copy. This is the case for the in
kernel copy of linux/filter.h but not for the copy in tools/ which
results in build breaks for the newly added arm64
seccomp_ptrace_x0_bypass selftest. Add an explicit include of the uapi
to fix the test and avoid future surprises.
Fixes: 2fcbc4adf9 ("kselftest/arm64: Add seccomp ptrace x0 bypass test")
Fixes: f143c11bb7 ("tools: bpf: Use local copy of headers including uapi/linux/filter.h")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
While the GCC and Clang compilers already define __ASSEMBLER__
automatically when compiling assembly code, __ASSEMBLY__ is a
macro that only gets defined by the Makefiles in the kernel.
This can be very confusing when switching between userspace
and kernelspace coding, or when dealing with uapi headers that
rather should use __ASSEMBLER__ instead. So let's standardize now
on the __ASSEMBLER__ macro that is provided by the compilers.
This is a completely mechanical patch (done with a simple "sed -i"
statement).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260619124936.208519-1-thuth@redhat.com
The macro lost its last user when select() was reimplemented on top of
pselect6 for every architecture; sys/select.h no longer looks at it,
and nothing else in the tree does either. See commit 668e437372
("tools/nolibc/select: drop non-pselect based implementations").
The comment that goes with it is stale for the same reason, as neither
architecture can end up calling old_select any more.
Drop both from arch-x86.h and arch-arm.h.
Cc: Alviro Iskandar Setiawan <alviro.iskandar@gnuweeb.org>
Signed-off-by: Ammar Faizi <ammarfaizi2@openresty.com>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
To pick up the changes in:
103ff3a50e ("KVM: s390: Add capability to support 2G hugepages")
229132c309 ("LoongArch: KVM: Add DMSINTC device support")
2619da73bb ("KVM: x86: Use __DECLARE_FLEX_ARRAY() for UAPI structures with VLAs")
4aebd7d5c7 ("KVM: s390: Add KVM capability for ESA mode guests")
4f256d5770 ("KVM: x86: nSVM: Save/restore gPAT with KVM_{GET,SET}_NESTED_STATE")
822790ab01 ("KVM: x86: Define KVM_X86_QUIRK_NESTED_SVM_SHARED_PAT")
8800dbf661 ("KVM: arm64: Allow userspace to create protected VMs when pKVM is enabled")
bf8f3cec93 ("KVM: s390: vsie: Refactor handle_stfle")
c547c51ff4 ("KVM: arm64: gic-v5: Add ARM_VGIC_V5 device to KVM headers")
d7507a94a0 ("KVM: SVM: Treat exit_code as an unsigned 64-bit value through all of KVM")
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h
diff -u tools/arch/s390/include/uapi/asm/kvm.h arch/s390/include/uapi/asm/kvm.h
Please see tools/include/uapi/README for further details.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes in:
b56ca146a2 ("vmalloc: add __GFP_SKIP_KASAN support")
6a288a4ddb ("mm/page_alloc: fix initialization of tags of the huge zero folio with init_on_free")
That just rebuilds perf, silencing this build warning.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/linux/gfp_types.h include/linux/gfp_types.h
Please see tools/include/uapi/README for further details.
Cc: David Hildenbrand (Arm) <david@kernel.org>
Cc: Muhammad Usama Anjum <usama.anjum@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes in:
b588019e85 ("rtnetlink: add RTEXT_FILTER_NAME_ONLY support")
That just rebuilds perf, silencing this build warning.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/rtnetlink.h include/uapi/linux/rtnetlink.h
Please see tools/include/uapi/README for further details.
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes in:
de9e2b3d88 ("uapi: Provide DIV_ROUND_CLOSEST()")
That just rebuilds perf, silencing this build warning.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/const.h include/uapi/linux/const.h
Please see tools/include/uapi/README for further details.
Cc: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The arm64 UAPI exposes some 128-bit integer types to represent things
such as fpsimd registers in the sigcontext. In preparation for defining
these using the '__u128' typedef implemented by uapi/linux/types.h, copy
that typedef over to the private linux/types.h header used by the tools
directory.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Matlack <dmatlack@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Now that the arrays of per-mode keys in struct fscrypt_master_key have
been replaced by a linked list, the definition of FSCRYPT_MODE_MAX
doesn't do anything useful. (Previously it was used to size these
arrays.) Remove it.
Link: https://patch.msgid.link/20260618231404.132829-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
BPF_FIB_LOOKUP_VLAN resolves a VLAN egress. The reverse is also
useful: an XDP program receiving a VLAN-tagged frame on a physical
device wants the lookup to behave as if the packet had arrived on the
corresponding VLAN subinterface, so iif-based policy routing and VRF
table selection use the right ingress.
Add BPF_FIB_LOOKUP_VLAN_INPUT. When set, params->h_vlan_proto and
params->h_vlan_TCI are read as an input VLAN tag and the matching VLAN
device of params->ifindex is resolved with __vlan_find_dev_deep_rcu().
The device must be up and in the same network namespace as
params->ifindex (a VLAN device can be moved to another netns while
registered on its parent; receive would deliver into that other
namespace, which a lookup here cannot represent). If params->ifindex
is itself a VLAN device, its inner (QinQ) subinterface is matched.
For a bond or team, a tag on a port matches no device and returns
NOT_FWDED; pass the master's ifindex.
The lookup then runs with the resolved device as the ingress;
params->ifindex itself is not modified on the input side. When the
resolved device is enslaved to a VRF, both the full lookup (via the
l3mdev rule) and BPF_FIB_LOOKUP_DIRECT (via l3mdev_fib_table_rcu())
select the VRF's table from the resolved ingress. That follows from
feeding the resolved device to the flow as the ingress
(fl4.flowi4_iif = dev->ifindex), which is what makes l3mdev resolve
the VRF master from the subinterface rather than from
params->ifindex.
The two failure classes get different treatment on purpose. A
h_vlan_proto other than 802.1Q/802.1ad is API misuse and returns
-EINVAL, since it would otherwise reach the WARN in vlan_proto_idx()
with a program-controlled value. An unmatched VID, a device that is
down, or one in another namespace is a data outcome and returns
BPF_FIB_LKUP_RET_NOT_FWDED, matching the DIRECT path when
fib_get_table() finds no table and mirroring real ingress, where the
receive path drops such frames. A VID of 0 (a priority tag) is looked
up literally and normally fails the same way; receive instead
processes such frames untagged, so callers should not set the flag for
priority tags. Proceeding on the physical device for any of these
would be fail-open for the policy-routing cases above.
The h_vlan fields share a union with tbid, so the flag cannot be
combined with BPF_FIB_LOOKUP_TBID. It describes ingress, so it also
cannot be combined with BPF_FIB_LOOKUP_OUTPUT. Both combinations
return -EINVAL; restricting now keeps a later relaxation backward
compatible. Combining with BPF_FIB_LOOKUP_VLAN is allowed: the tag is
consumed on the ingress side and the egress tag is written on
success.
Under !CONFIG_VLAN_8021Q the __vlan_find_dev_deep_rcu() stub returns
NULL, so every lookup with a valid proto returns NOT_FWDED, which is
correct since no VLAN device can exist.
Suggested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Avinash Duduskar <avinash.duduskar@gmail.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/20260713162305.1237211-3-avinash.duduskar@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
bpf_fib_lookup() returns the FIB-resolved egress ifindex straight
from the fib result. When the egress is a VLAN device, the returned
ifindex is the VLAN netdev's, which has no XDP xmit handler; XDP
programs that want to forward the frame (e.g. xdp-forward) must
instead target the underlying physical device and push the VLAN tag
themselves. Today the program has no way to learn either the
underlying ifindex or the VLAN tag without maintaining its own
VLAN-to-ifindex map in userspace and refreshing it on netlink
events.
Add BPF_FIB_LOOKUP_VLAN. When the caller sets this flag and the fib
result is a VLAN device whose immediate parent is a real (non-VLAN)
device in the same network namespace, populate the existing output
fields params->h_vlan_proto and params->h_vlan_TCI from the VLAN
device and replace params->ifindex with the parent's ifindex.
params->h_vlan_TCI carries the VID only, with PCP and DEI bits zero; a
consumer wanting to set egress priority writes PCP itself.
params->smac is the VLAN device's own address, which can differ from
the parent's.
Only the immediate parent is resolved, via vlan_dev_priv(dev)->real_dev
and not vlan_dev_real_dev(), which walks to the bottom of a stack. When
the immediate parent is not a real device in the same namespace, the
lookup returns BPF_FIB_LKUP_RET_VLAN_FAILURE and leaves params->ifindex
at the input. This covers a stacked VLAN (QinQ), where the immediate
parent is itself a VLAN device and one h_vlan_proto/h_vlan_TCI pair
cannot describe two tags, and a parent in another network namespace (a
VLAN device can be moved while its parent stays), whose ifindex would
be meaningless in the caller's namespace. A program that wants the
VLAN device's own ifindex re-issues the lookup, with a re-initialized
params, without BPF_FIB_LOOKUP_VLAN, so the unreducible case stays
distinct from a physical egress. That distinction matters for XDP: a
program cannot xmit on a VLAN device, so a success carrying the VLAN
ifindex would make it redirect to a device with no ndo_xdp_xmit and
drop the frame at xdp_do_flush(). The swap and the vlan fields are
written only on the reduce path; other output fields keep their
existing behaviour, so a frag-needed result still reports the route
mtu in params->mtu_result.
BPF_FIB_LOOKUP_VLAN is only useful to XDP, which cannot redirect to a
VLAN device. A tc program can redirect to the VLAN device directly, so
bpf_skb_fib_lookup() rejects the flag with -EINVAL; bpf_xdp_fib_lookup()
accepts it. When the flag is not set, behaviour is unchanged:
h_vlan_proto and h_vlan_TCI are zeroed and ifindex is left at the FIB
result.
The new block is compiled only under CONFIG_VLAN_8021Q since
vlan_dev_priv() is not defined otherwise; without that config
is_vlan_dev() is constant false and the flag is accepted but never
acts. That is safe because no VLAN device can exist there, so every
egress is already physical.
This lets an XDP redirect target the physical device and learn the
tag to push in a single lookup, which xdp-forward's optional VLAN
mode (xdp-project/xdp-tools#504) wants from the kernel side.
The helper's input semantics are unchanged; the reverse direction
(supplying a tag as lookup input) is added in the following patch.
Suggested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Avinash Duduskar <avinash.duduskar@gmail.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/bpf/20260713162305.1237211-2-avinash.duduskar@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Add getcwd() for getting the current working directory.
The behaviour matches what musl is doing except for one
important difference: If the passed buf is NULL musl (and glibc)
uses a big buffer on the stack and that is then strdup()'d and
returned.
According to the man page for getcwd() this is a glibc extension
and I don't think we need it in nolibc.
Signed-off-by: Daniel Palmer <daniel@thingy.jp>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260702085101.3304547-2-daniel@thingy.jp
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Adding BPF_OBJ_GET_INFO_BY_FD support for tracing_multi links.
We expose following tracing_multi link data:
- attach_type of the program
- number of ids
- array of BTF ids
- array of its related kernel addresses
- array of cookies
The change follows the kprobe_multi and uprobe_multi link-info convention
of optional output arrays with an in/out count,
On top of standard tracing link data we also expose addresses, because they
are useful info for user (especially when the attachment was done via pattern).
This data is hidden when kallsyms does not allow exposing kernel pointer values.
Assisted-by: Codex:GPT-5
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260629212208.895962-2-jolsa@kernel.org
Sync tools/include/linux/btf_ids.h with include/linux/btf_ids.h so
tools-side code can use BTF_ID_FLAGS(), BTF_SET8_START(), and
BTF_KFUNCS_START().
Keep the tools copy's existing compiler header dependency:
tools/include/linux/compiler.h already provides __maybe_unused and
tools/include/linux/compiler_attributes.h does not exist.
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260624005546.1818483-2-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We have several use cases where a pod injects traffic into the datapath
of another so that the traffic appears to have originated from that
pod. One such use case is a synthetic flow generator which injects
synthetic traffic into a pod's datapath to enable dynamic probing and
debugging. Another is a transparent proxy where connections originating
from one pod are redirected towards another which proxies that
connection. The new connection is bound to the IP of the original pod
using IP_TRANSPARENT and its traffic is injected into that pod's
datapath and handled as if it had originated there. This can be used for
mTLS, etc.
We use bpf_redirect(BPF_F_INGRESS) to direct traffic leaving the proxy,
flow generator, etc. towards the target pod, ensuring that eBPF programs
that are meant to intercept traffic leaving that pod are executed.
However, this doesn't work with netkit.
With netkit, an ingress redirection from proxy to workload skips eBPF
programs that are meant to intercept traffic leaving the pod, since they
reside on the netkit peer device. One workaround is to attach the
same program to both the netkit peer device and the TCX ingress hook for
the netkit pair's primary interface, but
a) This seems hacky and we need to be careful not to run the same
program twice for the same skb in cases where we want to pass that
traffic to the host stack.
b) We're trying to keep the proxy redirection / traffic injection
systems as modular and separated from Cilium as possible, the system
that manages netkit setup and core eBPF programming.
It would be handy if instead we could redirect traffic directly from
one netkit peer device to another. This patch proposes an extension
to bpf_redirect_peer to allow us to do just that.
With this patch, the BPF_F_EGRESS flag tells bpf_redirect_peer to emit
the skb in the egress direction of the target interface's peer device
While the main use case is netkit, I suppose you could also use this
mode with veth as well if, e.g., there were some eBPF programs attached
to that side of the veth pair that needed to intercept traffic.
+---------------------------------------------------------------------+
| +-------------------------+ 6. bpf_redirect_neigh(eth0) |
| | pod (10.244.0.10) | ------------------------ |
| | | | | |
| | +--------+ | | +---------+ | |
| | 1. packet -->| | | | | | | |
| | leaves ^ | netkit |<===========|======| netkit | | |
| | | | peer |=======(eBPF)=====>| primary | | |
| | | | | | | | | | |
| | | +--------+ | | +---------+ | |
| | | | | 2. bpf_redirect v |
| +-----------|-------------+ |___________________ +-------|
| | | | eth0 |
| | 5. bpf_redirect_peer(BPF_F_EGRESS) | +-------|
| |________________________ | |
| +-------------------------+ | | |
| | proxy (10.244.0.11) | | | |
| | IP_TRANSPARENT | | | |
| | +--------+ | | +---------+ | |
| | 3. packet <--| | | | | |<-- |
| | enters | netkit |<===========|======| netkit | |
| | [proxy] | peer |=======(eBPF)=====>| primary | |
| | 4. packet -->| | | | | |
| | leaves +--------+ | +---------+ |
| | sip=10.244.0.10 | |
| +-------------------------+ |
+---------------------------------------------------------------------+
Using the proxy use case as an example, in step 5 we would redirect
traffic leaving the proxy towards the pod's peer device using
bpf_redirect_peer(BPF_F_EGRESS).
As a bonus, since the skb doesn't have to go through the backlog queue
it can take full advantage of netkit's performance benefits. I set up a
test where outgoing iperf3 traffic is injected into the datapath of
another pod using either bpf_redirect_peer(BPF_F_EGRESS) or
bpf_redirect(BPF_F_INGRESS). I used Cilium's eBPF host routing mode
which skips the host stack and uses BPF redirect helpers to do all the
routing.
(net.ipv4.tcp_congestion_control=cubic,mtu=1500,100GiB link,Cilium
eBPF host routing mode)
BASELINE [bpf_redirect(BPF_F_INGRESS)]
1. [iperf pod] ==bpf_redirect([pod b], BPF_F_INGRESS)==> [pod b]
2. [pod b] ==bpf_redirect_neigh([eth0])==> eth0
3. eth0 ==over network==> [host b]
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-60.00 sec 231 GBytes 33.0 Gbits/sec 12060 sender
[ 5] 0.00-60.00 sec 230 GBytes 33.0 Gbits/sec receiver
TEST [bpf_redirect_peer(BPF_F_EGRESS)]
1. [iperf pod] ==bpf_redirect_peer([pod b], BPF_F_EGRESS)==> [pod b]
2. [pod b] ==bpf_redirect_neigh([eth0])==> eth0
3. eth0 ==over network==> [host b]
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-60.00 sec 272 GBytes 38.9 Gbits/sec 0 sender
[ 5] 0.00-60.00 sec 272 GBytes 38.9 Gbits/sec receiver
In this test, using bpf_redirect_peer(BPF_F_EGRESS) for the hop from
[iperf pod] to [pod b] led to ~18% more throughput compared to
bpf_redirect(BPF_F_INGRESS).
Signed-off-by: Jordan Rife <jordan@jrife.io>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Paul Chaignon <paul.chaignon@gmail.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/r/20260618182035.43811-2-jordan@jrife.io
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull bpf updates from Alexei Starovoitov:
"Major changes:
- Recover from BPF arena page faults using a scratch page and add
ptep_try_set() for lockless empty-slot installs on x86 and arm64.
This allows BPF kfuncs to access arena pointers directly.
The 'arena_direct_access' stable branch was created for this work
and was pulled into sched-ext and bpf-next trees (Tejun Heo, Kumar
Kartikeya Dwivedi)
- Lift old restriction and support 6+ arguments in BPF programs and
kfuncs on x86 and arm64 (Yonghong Song, Puranjay Mohan)
Other features and fixes:
- Add 24-bit BTF vlen and reclaim unused bits in the BTF UAPI to ease
addition of new BTF kinds (Alan Maguire)
- Raise the maximum BPF call chain depth from 8 to 16 frames (Alexei
Starovoitov)
- Refactor object relationship tracking in the verifier and fix a
dynptr use-after-free bug (Amery Hung)
- Harden the signed program loader and reject exclusive maps as inner
maps (Daniel Borkmann)
- Replace the verifier min/max bounds fields with a circular number
(cnum) representation and improve 32->64 bit range refinements
(Eduard Zingerman)
- Introduce the arena library and runtime (libarena) with a buddy
allocator, rbtree and SPMC queue data structures, ASAN support and
a parallel test harness. Allow subprograms to return arena pointers
and switch to a BTF type-tag based __arena annotation (Emil
Tsalapatis)
- Cache build IDs in the sleepable stackmap path and avoid faultable
build ID reads under mm locks (Ihor Solodrai)
- Introduce the tracing_multi link to attach a single BPF program to
many kernel functions at once. Allow specifying the uprobe_multi
target via FD (Jiri Olsa)
- Extend the bpf_list family of kfuncs with bpf_list_add/del(), and
bpf_list_is_first/is_last/empty() (Kaitao Cheng)
- Extend the BPF syscall with common attributes support for
prog_load, btf_load and map_create (Leon Hwang)
- Wrap rhashtable as BPF map (Mykyta Yatsenko, Herbert Xu)
- Add sleepable support for tracepoint programs and fix deadlocks in
LRU map due to NMI reentry (Mykyta Yatsenko)
- Fix OOB access in bpf_flow_keys, fix nullness analysis of inner
arrays, enforce write checks for global subprograms (Nuoqi Gui)
- Report the maximum combined stack depth and print a breakdown of
instructions processed per subprogram (Paul Chaignon)
- Add an XDP load-balancer benchmark and arm64 JIT support for stack
arguments (Puranjay Mohan)
- Add kfuncs to traverse over wakeup_sources (Samuel Wu)
- Allow sleepable BPF programs to use LPM trie maps directly (Vlad
Poenaru)
- Many more fixes and cleanups across the verifier, BTF, sockmap,
devmap, bpffs, security hooks, s390/riscv/loongarch JITs,
rqspinlock, libbpf, bpftool, selftests"
* tag 'bpf-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (336 commits)
selftests/bpf: Work around llvm stack overflow in crypto progs
selftests/bpf: add test for bpf_msg_pop_data() overflow
bpf, sockmap: fix integer overflow in bpf_msg_pop_data() bounds check
sockmap: Fix use-after-free in udp_bpf_recvmsg()
bpf, sockmap: keep sk_msg copy state in sync
bpf, sockmap: Fix wrong rsge offset in bpf_msg_push_data()
bpf, sockmap: reject overflowing copy + len in bpf_msg_push_data()
selftsets/bpf: Retry map update on helper_fill_hashmap()
selftests/bpf: Add test for sleepable lsm_cgroup rejection
selftests/bpf: Add test to verify the fix for bpf_setsockopt() helper
bpf: Fix bpf_get/setsockopt to tos for ipv4-mapped ipv6 socket
selftests/bpf: Avoid static LLVM linking for cross builds
selftests/bpf: Use common CFLAGS for urandom_read
selftests/bpf: Initialize operation name before use
tools/bpf: build: Append extra cflags
libbpf: Initialize CFLAGS before including Makefile.include
bpftool: Append extra host flags
bpftool: Avoid adding EXTRA_CFLAGS to HOST_CFLAGS
bpftool: Pass host flags to bootstrap libbpf
selftests/bpf: correct CONFIG_PPC64 macro name in comment
...
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Work on removing rtnl_lock protection throughout the stack
continues. In this chapter:
- don't use rtnl_lock for IPv6 multicast routing configuration
- don't take rtnl_lock in ethtool for modern drivers
- prepare Qdisc dump callbacks for rtnl_lock removal
- Support dumping just ifindex + name of all interfaces, under RCU.
It's a common operation for Netlink CLI tools (when translating
names to ifindexes) and previously required full rtnl_lock.
- Support dumping qdiscs and page pools for a specific netdev. Even
tho user space wants a dump of all netdevs, most of the time, the
OOO programming model results in repeating the dump for each
netdev. Which, in absence of a cache, leads to a O(n^2) behavior.
- Flush nexthops once on multi-nexthop removal (e.g. when device goes
down), another O(n^2) -> O(n) improvement.
- Rehash locally generated traffic to a different nexthop on
retransmit timeout.
- Honor oif when choosing nexthop for locally generated IPv6 traffic.
- Convert TCP Auth Option to crypto library, and drop non-RFC algos.
- Increase subflow limits in MPTCP to 64 and endpoint limit to 256.
- Support MPTCP signaling of IPv6 address + port (ADD_ADDR). We need
to selectively skip reporting of the standard TCP Timestamp option,
because they won't fit into the header space together (12 + 30 >
40).
- Support using bridge neighbor suppression, Duplicate Address
Detection, Gratuitous ARP and unsolicited NA forwarding - in EVPN
deployments, e.g. VXLAN fabrics (IPv4 and IPv6).
- Improve link state reporting for upper netdevs (e.g. macvlan) over
tunnel devices (again, mostly for EVPN deployments).
- Support binding GENEVE tunnels to a local address.
- Speed up UDP tunnel destruction (remove one synchronize_rcu()).
- Support exponential field encoding in multicast (IGMPv3 and MLDv2).
- Support attaching PSP crypto offload to containers (veth, netkit).
- Add a new IPSec Netlink message XFRM_MSG_MIGRATE_STATE that allows
migrating individual IPsec SAs independently of their policies.
The existing XFRM_MSG_MIGRATE is tightly coupled to policy+SA
migration, lacks SPI for unique SA identification, and cannot
express reqid changes or migrate Transport mode selectors.
The new interface identifies the SA via SPI and mark, supports
reqid changes, address family changes, encap removal, and uses an
atomic create+install flow under x->lock to prevent SN/IV reuse
during AEAD SA migration.
- Implement GRO/GSO support for PPPoE.
- Convert sockopt callbacks in a number of protocols to iov_iter.
Cross-tree stuff:
- Remove support for Crypto TFM cloning (unblocked after the TCP Auth
Option rework). This feature regressed performance for all crypto
API users, since it changed crypto transformation objects into
reference-counted objects.
- Add FCrypt-PCBC implementation to rxrpc and remove it from the
global crypto API as obsolete and insecure.
Wireless:
- Major rework of station bandwidth handling, fixing issues with
lower capability than AP.
- Cleanups for EMLSR spec issues (drafts differed).
- More Neighbor Awareness Networking (Wi-Fi Aware) work (multicast,
schedule improvements, multi-station etc.)
- Some Ultra High Reliability (UHR) / IEEE 802.11bn (D1.4) work
(e.g. non-primary channel access, UHR DBE support).
- Fine Timing Measurement ranging (i.e. distance measurement) APIs.
Netfilter:
- Use per-rule hash initval in nf_conncount. This avoids unnecessary
lock contention with short keys (e.g. conntrack zones) in different
namespaces.
- Various safety improvements, both in packet parsing and object
lifetimes. Notably add refcounts to conntrack timeout policy.
Deletions:
- Remove TLS + sockmap integration. TLS wants to pin user pages to
avoid a copy, and sockmap wants to write to the input stream. More
work on this integration is clearly needed, and we can't find any
users (original author admitted that they never deployed it).
- Remove support for TLS offload with TCP Offload Engine (the far
more common opportunistic offload is retained). The locking looks
unfixable (driver sleeps under TCP spin locks) and people from the
vendor that added this are AWOL.
- Remove more ATM code, trying to leave behind only what PPPoATM
needs, AAL5 and br2684 with permanent circuits.
- Remove AppleTalk. Let it join hamradio in our out of tree protocol
graveyard, I mean, repository.
- Disable 32-bit x_tables compatibility (32bit binaries on 64bit
kernel) interface in user namespaces. To be deleted completely,
soon.
- Remove 5/10 MHz support from cfg80211/mac80211.
Drivers:
- Software:
- Support DEVMEM/DMABUF Tx over NETMEM_TX_NO_DMA devices (netkit)
- bonding: add knob to strictly follow 802.3ad for link state
- New drivers:
- Alibaba Elastic Ethernet Adaptor (cloud vNIC).
- NXP NETC switch within i.MX94.
- DPLL:
- Add operational state to pins (implement in zl3073x).
- Add generic DPLL type, for daisy-chaining DPLLs (implement in ice).
- Ethernet high-speed NICs:
- Huawei (hinic3):
- enhance tc flow offload support with queue selection,
tunnels
- nVidia/Mellanox:
- avoid over-copying payload to the skb's linear part (up to
60% win for LRO on slow CPUs like ARM64 V2)
- expose more per-queue stats over the standard API
- support additional, unprivileged PFs in the DPU
configuration
- support Socket Direct (multi-PF) with switchdev offloads
- add a pool / frag allocator for DMA mapped buffers for
control objects, save memory on systems with 64kB page size
- take advantage of the ability to dynamically change RSS
table size, even when table is configured by the user
- increase the max RSS table size for even traffic
distribution
- Ethernet NICs:
- Marvell/Aquantia:
- AQC113 PTP support
- Realtek USB (r8152):
- support 10Gbit Link Speeds and Energy-Efficient Ethernet
(EEE)
- support firmware loaded (for RTL8157/RTL8159)
- support for the RTL8159
- Intel (ixgbe):
- support Energy-Efficient Ethernet (EEE) on E610 devices
- Ethernet switches:
- Airoha:
- support multiple netdevs on a single GDM block / port
- Marvell (mv88e6xxx):
- support SERDES of mv88e6321
- Microchip (ksz8/9):
- rework the driver callbacks to remove one indirection layer
- Motorcomm (yt921x):
- support port rate policing
- support TBF qdisc offload
- support ACL/flower offload
- nVidia/Mellanox:
- expose per-PG rx_discards
- Realtek:
- rtl8365mb: bridge offloading and VLAN support
- Ethernet PHYs:
- Airoha:
- support Airoha AN8801R Gigabit PHYs.
- Micrel:
- implement 3 low-loss cable tunables
- Realtek:
- support MDI swapping for RTL8226-CG
- support MDIO for RTL931x
- Qualcomm:
- at803x: Rx and Tx clock management for IPQ5018 PHY
- Motorcomm:
- support YT8522 100M RMII PHY
- set drive strength in YT8531s RGMII
- TI:
- dp83822: add optional external PHY clock
- Bluetooth:
- hci_sync: add support for HCI_LE_Set_Host_Feature [v2]
- SMP: use AES-CMAC library API
- Intel:
- support Product level reset
- support smart trigger dump
- Mediatek:
- add event filter to filter specific event
- Realtek:
- fix RTL8761B/BU broken LE extended scan
- WiFi:
- Broadcom (b43):
- new support for a 11n device
- MediaTek (mt76):
- support mt7927
- mt792x: broken usb transport detection
- mt7921: regulatory improvements
- Qualcomm (ath9k):
- GPIO interface improvements
- Qualcomm (ath12k):
- WDS support
- replace dynamic memory allocation in WMI Rx path
- thermal throttling/cooling device support
- 6 GHz incumbent interference detection
- channel 177 in 5 GHz
- Realtek (rt89):
- RTL8922AU support
- USB 3 mode switch for performance
- better monitor radiotap support
- RTL8922DE preparations"
* tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1778 commits)
ipv4: fib_rule: Move fib4_rules_exit() to ->exit().
net: serialize netif_running() check in enqueue_to_backlog()
net: skmsg: preserve sg.copy across SG transforms
appletalk: move the protocol out of tree
appletalk: stop storing per-interface state in struct net_device
selftests/bpf: test that TLS crypto is rejected on a sockmap socket
selftests/bpf: drop the unused kTLS program from test_sockmap
selftests/bpf: remove sockmap + ktls tests
tls: remove dead sockmap (psock) handling from the SW path
tls: reject the combination of TLS and sockmap
atm: remove orphaned uAPI for deleted drivers, protocols and SVCs
atm: remove unused ATM PHY operations
atm: remove the unused pre_send and send_bh device operations
atm: remove the unused change_qos device operation
atm: remove SVC socket support and the signaling daemon interface
atm: remove the local ATM (NSAP) address registry
atm: remove dead SONET PHY ioctls
atm: remove the unused send_oam / push_oam callbacks
atm: remove AAL3/4 transport support
net: dsa: sja1105: fix lastused timestamp in flower stats
...
Pull slab updates from Vlastimil Babka:
- Support for "allocation tokens" (currently available in Clang 22+)
for smarter partitioning of kmalloc caches based on the allocated
object type, which can be enabled instead of the "random"
per-caller-address-hash partitioning.
It should be able to deterministically separate types containing a
pointer from those that do not (Marco Elver)
- Improvements and simplification of the kmem_cache_alloc_bulk() and
mempool_alloc_bulk() API. This includes adaptation of callers
(Christoph Hellwig)
- Performance improvements and cleanups related mostly to sheaves
refill (Hao Li, Shengming Hu, Vlastimil Babka)
- Several fixups for the slabinfo tool (Xuewen Wang)
* tag 'slab-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab: do not limit zeroing to orig_size when only red zoning is enabled
mm/slub: preserve original size in _kmalloc_nolock_noprof retry path
mm: simplify the mempool_alloc_bulk API
mm/slab: improve kmem_cache_alloc_bulk
mm/slub: detach and reattach partial slabs in batch
mm/slub: introduce helpers for node partial slab state
mm/slub: use empty sheaf helpers for oversized sheaves
tools/mm/slabinfo: remove redundant slab->partial assignment
tools/mm/slabinfo: remove dead assignment in get_obj_and_str()
tools/mm/slabinfo: Fix trace disable logic inversion
MAINTAINERS: add slab-related scripts and tools to SLAB ALLOCATOR
mm/slub: fix typo in sheaves comment
mm, slab: simplify returning slab in __refill_objects_node()
mm, slab: add an optimistic __slab_try_return_freelist()
slab: fix kernel-docs for mm-api
slab: improve KMALLOC_PARTITION_RANDOM randomness
slab: support for compiler-assisted type-based slab cache partitioning
mm/slub: defer freelist construction until after bulk allocation from a new slab
Pull nolibc updates from Thomas Weißschuh:
- New architectures: OpenRISC and 32-bit parisc
- New library functionality: alloca(), assert(), creat() and
ftruncate()
- Automatic large file support
- Proper 64-bit system call argument passing on x32 and MIPS N32
- Cleanups of the testmatrix
- Various bugfixes and cleanups
* tag 'nolibc-20260614-for-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc: (37 commits)
selftests/nolibc: test against -Wwrite-strings
selftests/nolibc: use mutable buffer for execve() argv string
tools/nolibc: cast default values of program_invocation_name
tools/nolibc: add ftruncate()
tools/nolibc: add a helper to split a 64-bit argument into 32-bit halves
selftests/nolibc: enable CONFIG_TMPFS for sparc32
tools/nolibc: stackprotector: Avoid stalling program startup if crng is not init yet
tools/nolibc: getopt: Fix potential out of bounds access
selftests/nolibc: test open mode handling
tools/nolibc: always pass mode to open syscall
tools/nolibc: split open mode handling into a macro
tools/nolibc: split implicit open flags into a macro
tools/nolibc: add support for 32-bit parisc
selftests/nolibc: avoid function pointer comparisons
tools/nolibc: add support for OpenRISC / or1k
selftests/nolibc: use vmlinux for MIPS tests
selftests/nolibc: trim IMAGE mappings
selftests/nolibc: trim DEFCONFIG mappings
selftests/nolibc: trim QEMU_ARCH mappings
selftests/nolibc: use QEMU_ARCH for QEMU_ARCH_USER
...
Allow uprobe_multi link to identify the target binary by an already
opened file descriptor.
Adding new BPF_F_UPROBE_MULTI_PATH_FD flag and the path_fd field for
the attr.link_create.uprobe_multi struct.
When the flag is set, we resolve the target from path_fd, without the
flag, we keep the existing string path behavior.
I don't see a use case for supporting O_PATH file descriptors, because
we need to read the binary first to get probes offsets, so I'm using
the CLASS(fd, f), which fails for O_PATH fds.
Assisted-by: Codex:GPT-5.4
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260611114230.950379-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull openat2 updates from Christian Brauner:
"Features:
- Add O_EMPTYPATH to openat(2)/openat2(2). To get an operable file
descriptor from an O_PATH file descriptor it is possible to use
openat(fd, ".", O_DIRECTORY) for directories, but other file types
require going through open("/proc/<pid>/fd/<nr>") and thus depend
on a functioning procfs.
With O_EMPTYPATH an empty path string is accepted and LOOKUP_EMPTY
is set at path resolution time, allowing to reopen the file behind
the file descriptor directly. Selftests are included.
- Add an OPENAT2_REGULAR flag for openat2(2) which refuses to open
anything but regular files with the new EFTYPE error code.
This implements the "ability to only open regular files" feature
requested by userspace via uapi-group.org and protects services
from being redirected to fifos, device nodes, and friends.
All atomic_open implementations were audited for OPENAT2_REGULAR
handling. Explicit checks were added to ceph, gfs2, nfs (v4), and
cifs/smb - these are the filesystems whose atomic_open can
encounter an existing non-regular file and would otherwise call
finish_open() on it or return a misleading error code.
The remaining implementations (9p, fuse, vboxsf, nfs v2/v3) only
call finish_open() on freshly created files and use
finish_no_open() for lookup hits, letting the VFS catch non-regular
files via the do_open() safety net.
Cleanups:
- Migrate the openat2 selftests to the kselftest harness and move
them under selftests/filesystems/. The tests were written in the
early days of selftests' TAP support and the modern kselftest
harness is much easier to follow and maintain. The contents of the
tests are unchanged and the new emptypath tests are ported on top.
- Make the LAST_XXX last-type constants private to fs/namei.c. The
only user outside of fs/namei.c was ksmbd which only needs to know
whether the last component is a regular one, so
vfs_path_parent_lookup() now performs the LAST_NORM check
internally. The ints are replaced with a dedicated enum last_type"
* tag 'vfs-7.2-rc1.openat2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
vfs: replace ints with enum last_type for LAST_XXX
vfs: make LAST_XXX private to fs/namei.c
selftests: openat2: port emptypath_test to kselftest harness
kselftest/openat2: test for OPENAT2_REGULAR flag
openat2: new OPENAT2_REGULAR flag support
openat2: introduce EFTYPE error code
selftest: add tests for O_EMPTYPATH
vfs: add O_EMPTYPATH to openat(2)/openat2(2)
selftests: openat2: migrate to kselftest harness
selftests: openat2: switch from custom ARRAY_LEN to ARRAY_SIZE
selftests: openat2: move helpers to header
selftests: move openat2 tests to selftests/filesystems/
Cross-merge networking fixes after downstream PR (net-7.1-rc8).
Conflicts:
drivers/net/ethernet/wangxun/txgbe/txgbe_aml.c
f67aead16e ("net: txgbe: rework service event handling")
57d39faed4 ("net: txgbe: improve functions of AML 40G devices")
net/rds/info.c
512db8267b ("rds: mark snapshot pages dirty in rds_info_getsockopt()")
6e94eeb2a2 ("rds: convert to getsockopt_iter")
Adjacent changes:
include/net/sock.h
1ee90b77b7 ("net: guard timestamp cmsgs to real error queue skbs")
f0de88303d ("net: make is_skb_wmem() available to modules")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an 802.3ad (LACP) bonding interface has no slaves in the
collecting/distributing state, the bonding master still reports
carrier as up as long as at least 'min_links' slaves have carrier.
In this situation, only one slave is effectively used for TX/RX,
while traffic received on other slaves is dropped. Upper-layer
daemons therefore consider the interface operational, even though
traffic may be blackholed if the lack of LACP negotiation means
the partner is not ready to deal with traffic.
Introduce a configuration knob to control this behavior. It allows
the bonding master to assert carrier only when at least 'min_links'
slaves are in Collecting_Distributing state.
The default mode preserves the existing behavior. This patch only
introduces the knob; its behavior is implemented in the subsequent
commit.
Fixes: 655f8919d5 ("bonding: add min links parameter to 802.3ad")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20260603150331.1919611-4-louis.scalbert@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adding support to use session attachment with tracing_multi link.
Adding new BPF_TRACE_FSESSION_MULTI program attach type, that follows
the BPF_TRACE_FSESSION behaviour but on the tracing_multi link.
Such program is called on entry and exit of the attached function
and allows to pass cookie value from entry to exit execution.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260606123955.345967-16-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
