In __blk_mq_tag_busy/idle(), updating 'active_queues' and calculating
'wake_batch' is not atomic:
t1: t2:
_blk_mq_tag_busy blk_mq_tag_busy
inc active_queues
// assume 1->2
inc active_queues
// 2 -> 3
blk_mq_update_wake_batch
// calculate based on 3
blk_mq_update_wake_batch
/* calculate based on 2, while active_queues is actually 3. */
Fix this problem by protecting them wih 'tags->lock', this is not a hot
path, so performance should not be concerned. And now that all writers
are inside the lock, switch 'actives_queues' from atomic to unsigned
int.
Fixes: 180dccb0db ("blk-mq: fix tag_get wait task can't be awakened")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230610023043.2559121-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The only overlap between the block open flags mapped into the fmode_t and
other uses of fmode_t are FMODE_READ and FMODE_WRITE. Define a new
blk_mode_t instead for use in blkdev_get_by_{dev,path}, ->open and
->ioctl and stop abusing fmode_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230608110258.189493-28-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The current interface for exclusive opens is rather confusing as it
requires both the FMODE_EXCL flag and a holder. Remove the need to pass
FMODE_EXCL and just key off the exclusive open off a non-NULL holder.
For blkdev_put this requires adding the holder argument, which provides
better debug checking that only the holder actually releases the hold,
but at the same time allows removing the now superfluous mode argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Link: https://lore.kernel.org/r/20230608110258.189493-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Set a flag when a cdrom_device_info is opened for writing, instead of
trying to figure out this at release time. This will allow to eventually
remove the mode argument to the ->release block_device_operation as
nothing but the CDROM drivers uses that argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Phillip Potter <phil@philpotter.co.uk>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20230608110258.189493-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_lookup_devt is only used by code in early-lookup.c, so move it
there.
printk_all_partitions and it's helper bdevt_str are only used by the
early init code in init/do_mounts.c, so they should go there as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
name_to_dev_t has a very misleading name, that doesn't make clear
it should only be used by the early init code, and also has a bad
calling convention that doesn't allow returning different kinds of
errors. Rename it to early_lookup_bdev to make the use case clear,
and return an errno, where -EINVAL means the string could not be
parsed, and -ENODEV means it the string was valid, but there was
no device found for it.
Also stub out the whole call for !CONFIG_BLOCK as all the non-block
root cases are always covered in the caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Assign a Root_Generic magic value for UBI/MTD root and handle the root
mounting in mount_root like all other root types. Besides making the
code more clear this also means that UBI/MTD root can be used together
with an initrd (not that anyone should care).
Also factor parsing of the root name into a helper now that it can
be easily done and will get more complicated with subsequent patches.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove all unused defines, and just use the expanded versions for
the SCSI disk majors.
I've decided to keep Root_RAM0 even if it could be expanded as there
is a lot of special casing for it in the init code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new ->shutdown super operation that can be used to tell the file
system to shut down, and call it from newly created holder ops when the
block device under a file system shuts down.
This only covers the main block device for "simple" file systems using
get_tree_bdev / mount_bdev. File systems their own get_tree method
or opening additional devices will need to set up their own
blk_holder_ops.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new blk_holder_ops structure, which is passed to blkdev_get_by_* and
installed in the block_device for exclusive claims. It will be used to
allow the block layer to call back into the user of the block device for
thing like notification of a removed device or a device resize.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add control command of UBLK_U_CMD_GET_FEATURES for returning driver's
feature set or capability.
This way can simplify userspace for maintaining compatibility because
userspace doesn't need to send command to one device for querying driver
feature set any more. Such as, with the queried feature set, userspace
can choose to use:
- UBLK_CMD_GET_DEV_INFO2 or UBLK_CMD_GET_DEV_INFO,
- UBLK_U_CMD_* or UBLK_CMD_*
Userspace code:
https://github.com/ming1/ubdsrv/commits/features-cmd
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230603040601.775227-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix bio_flagged() so that multiple instances of it, such as:
if (bio_flagged(bio, BIO_PAGE_REFFED) ||
bio_flagged(bio, BIO_PAGE_PINNED))
can be combined by the gcc optimiser into a single test in assembly
(arguably, this is a compiler optimisation issue[1]).
The missed optimisation stems from bio_flagged() comparing the result of
the bitwise-AND to zero. This results in an out-of-line bio_release_page()
being compiled to something like:
<+0>: mov 0x14(%rdi),%eax
<+3>: test $0x1,%al
<+5>: jne 0xffffffff816dac53 <bio_release_pages+11>
<+7>: test $0x2,%al
<+9>: je 0xffffffff816dac5c <bio_release_pages+20>
<+11>: movzbl %sil,%esi
<+15>: jmp 0xffffffff816daba1 <__bio_release_pages>
<+20>: jmp 0xffffffff81d0b800 <__x86_return_thunk>
However, the test is superfluous as the return type is bool. Removing it
results in:
<+0>: testb $0x3,0x14(%rdi)
<+4>: je 0xffffffff816e4af4 <bio_release_pages+15>
<+6>: movzbl %sil,%esi
<+10>: jmp 0xffffffff816dab7c <__bio_release_pages>
<+15>: jmp 0xffffffff81d0b7c0 <__x86_return_thunk>
instead.
Also, the MOVZBL instruction looks unnecessary[2] - I think it's just
're-booling' the mark_dirty parameter.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: linux-block@vger.kernel.org
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108370 [1]
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108371 [2]
Link: https://lore.kernel.org/r/167391056756.2311931.356007731815807265.stgit@warthog.procyon.org.uk/ # v6
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230522205744.2825689-3-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge splice bits as subsequent block cleanups and improvements for DIO
depend on them.
* for-6.5/splice: (31 commits)
splice: kdoc for filemap_splice_read() and copy_splice_read()
iov_iter: Kill ITER_PIPE
splice: Remove generic_file_splice_read()
splice: Use filemap_splice_read() instead of generic_file_splice_read()
cifs: Use filemap_splice_read()
trace: Convert trace/seq to use copy_splice_read()
zonefs: Provide a splice-read wrapper
xfs: Provide a splice-read wrapper
orangefs: Provide a splice-read wrapper
ocfs2: Provide a splice-read wrapper
ntfs3: Provide a splice-read wrapper
nfs: Provide a splice-read wrapper
f2fs: Provide a splice-read wrapper
ext4: Provide a splice-read wrapper
ecryptfs: Provide a splice-read wrapper
ceph: Provide a splice-read wrapper
afs: Provide a splice-read wrapper
9p: Add splice_read wrapper
net: Make sock_splice_read() use copy_splice_read() by default
tty, proc, kernfs, random: Use copy_splice_read()
...
commit 50e34d7881 ("block: disable the elevator int del_gendisk")
move rq_qos_exit() from disk_release() to del_gendisk(), this will
introduce some problems:
1) If rq_qos_add() is triggered by enabling iocost/iolatency through
cgroupfs, then it can concurrent with del_gendisk(), it's not safe to
write 'q->rq_qos' concurrently.
2) Activate cgroup policy that is relied on rq_qos will call
rq_qos_add() and blkcg_activate_policy(), and if rq_qos_exit() is
called in the middle, null-ptr-dereference will be triggered in
blkcg_activate_policy().
3) blkg_conf_open_bdev() can call blkdev_get_no_open() first to find the
disk, then if rq_qos_exit() from del_gendisk() is done before
rq_qos_add(), then memory will be leaked.
This patch add a new disk level mutex 'rq_qos_mutex':
1) The lock will protect rq_qos_exit() directly.
2) For wbt that doesn't relied on blk-cgroup, rq_qos_add() can only be
called from disk initialization for now because wbt can't be
destructed until rq_qos_exit(), so it's safe not to protect wbt for
now. Hoever, in case that rq_qos dynamically destruction is supported
in the furture, this patch also protect rq_qos_add() from wbt_init()
directly, this is enough because blk-sysfs already synchronize
writers with disk removal.
3) For iocost and iolatency, in order to synchronize disk removal and
cgroup configuration, the lock is held after blkdev_get_no_open()
from blkg_conf_open_bdev(), and is released in blkg_conf_exit().
In order to fix the above memory leak, disk_live() is checked after
holding the new lock.
Fixes: 50e34d7881 ("block: disable the elevator int del_gendisk")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230414084008.2085155-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently copy between io request buffer(pages) and userspace buffer is
done inside ublk_map_io() or ublk_unmap_io(). This way performs very
well in case of pre-allocated userspace io buffer.
For dynamically allocated or external userspace backend io buffer,
UBLK_F_NEED_GET_DATA is added for ublk server to provide buffer by one
extra command communication for WRITE request. For READ, userspace
simply provides buffer, but can't know when the buffer is done[1].
Add UBLK_F_USER_COPY by moving io data copy out of kernel by providing
read()/write() on /dev/ublkcN, and simply let ublk server do the io
data copy. This way makes both side cleaner, the cost is that one extra
syscall for copy io data between request and backend buffer.
With UBLK_F_USER_COPY, it actually becomes possible to run per-io zero
copy now, such as, only do zero copy for big size IO, so it can be
thought as one prep patch for supporting zero copy. Meantime zero copy
still needs to expose read()/write() buffer for some corner case, such
as passthrough IO.
[1] READ buffer in UBLK_F_NEED_GET_DATA
https://lore.kernel.org/linux-block/116d8a56-0881-56d3-9bcc-78ff3e1dc4e5@linux.alibaba.com/T/#m23bd4b8634c0a054e6797063167b469949a247bb
ublksrv loop usercopy code:
https://github.com/ming1/ubdsrv/commits/usercopy
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230519065030.351216-8-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
