mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2026-01-06 03:15:08 -05:00
7fd4da9c1584be97ffbc40e600a19cb469fd4e78
1505 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
0326074ff4 |
Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Introduce and use a single page frag cache for allocating small skb
heads, clawing back the 10-20% performance regression in UDP flood
test from previous fixes.
- Run packets which already went thru HW coalescing thru SW GRO. This
significantly improves TCP segment coalescing and simplifies
deployments as different workloads benefit from HW or SW GRO.
- Shrink the size of the base zero-copy send structure.
- Move TCP init under a new slow / sleepable version of DO_ONCE().
BPF:
- Add BPF-specific, any-context-safe memory allocator.
- Add helpers/kfuncs for PKCS#7 signature verification from BPF
programs.
- Define a new map type and related helpers for user space -> kernel
communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).
- Allow targeting BPF iterators to loop through resources of one
task/thread.
- Add ability to call selected destructive functions. Expose
crash_kexec() to allow BPF to trigger a kernel dump. Use
CAP_SYS_BOOT check on the loading process to judge permissions.
- Enable BPF to collect custom hierarchical cgroup stats efficiently
by integrating with the rstat framework.
- Support struct arguments for trampoline based programs. Only
structs with size <= 16B and x86 are supported.
- Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
sockets (instead of just TCP and UDP sockets).
- Add a helper for accessing CLOCK_TAI for time sensitive network
related programs.
- Support accessing network tunnel metadata's flags.
- Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.
- Add support for writing to Netfilter's nf_conn:mark.
Protocols:
- WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation
(MLO) work (802.11be, WiFi 7).
- vsock: improve support for SO_RCVLOWAT.
- SMC: support SO_REUSEPORT.
- Netlink: define and document how to use netlink in a "modern" way.
Support reporting missing attributes via extended ACK.
- IPSec: support collect metadata mode for xfrm interfaces.
- TCPv6: send consistent autoflowlabel in SYN_RECV state and RST
packets.
- TCP: introduce optional per-netns connection hash table to allow
better isolation between namespaces (opt-in, at the cost of memory
and cache pressure).
- MPTCP: support TCP_FASTOPEN_CONNECT.
- Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.
- Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.
- Open vSwitch:
- Allow specifying ifindex of new interfaces.
- Allow conntrack and metering in non-initial user namespace.
- TLS: support the Korean ARIA-GCM crypto algorithm.
- Remove DECnet support.
Driver API:
- Allow selecting the conduit interface used by each port in DSA
switches, at runtime.
- Ethernet Power Sourcing Equipment and Power Device support.
- Add tc-taprio support for queueMaxSDU parameter, i.e. setting per
traffic class max frame size for time-based packet schedules.
- Support PHY rate matching - adapting between differing host-side
and link-side speeds.
- Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.
- Validate OF (device tree) nodes for DSA shared ports; make
phylink-related properties mandatory on DSA and CPU ports.
Enforcing more uniformity should allow transitioning to phylink.
- Require that flash component name used during update matches one of
the components for which version is reported by info_get().
- Remove "weight" argument from driver-facing NAPI API as much as
possible. It's one of those magic knobs which seemed like a good
idea at the time but is too indirect to use in practice.
- Support offload of TLS connections with 256 bit keys.
New hardware / drivers:
- Ethernet:
- Microchip KSZ9896 6-port Gigabit Ethernet Switch
- Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
- Analog Devices ADIN1110 and ADIN2111 industrial single pair
Ethernet (10BASE-T1L) MAC+PHY.
- Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).
- Ethernet SFPs / modules:
- RollBall / Hilink / Turris 10G copper SFPs
- HALNy GPON module
- WiFi:
- CYW43439 SDIO chipset (brcmfmac)
- CYW89459 PCIe chipset (brcmfmac)
- BCM4378 on Apple platforms (brcmfmac)
Drivers:
- CAN:
- gs_usb: HW timestamp support
- Ethernet PHYs:
- lan8814: cable diagnostics
- Ethernet NICs:
- Intel (100G):
- implement control of FCS/CRC stripping
- port splitting via devlink
- L2TPv3 filtering offload
- nVidia/Mellanox:
- tunnel offload for sub-functions
- MACSec offload, w/ Extended packet number and replay window
offload
- significantly restructure, and optimize the AF_XDP support,
align the behavior with other vendors
- Huawei:
- configuring DSCP map for traffic class selection
- querying standard FEC statistics
- querying SerDes lane number via ethtool
- Marvell/Cavium:
- egress priority flow control
- MACSec offload
- AMD/SolarFlare:
- PTP over IPv6 and raw Ethernet
- small / embedded:
- ax88772: convert to phylink (to support SFP cages)
- altera: tse: convert to phylink
- ftgmac100: support fixed link
- enetc: standard Ethtool counters
- macb: ZynqMP SGMII dynamic configuration support
- tsnep: support multi-queue and use page pool
- lan743x: Rx IP & TCP checksum offload
- igc: add xdp frags support to ndo_xdp_xmit
- Ethernet high-speed switches:
- Marvell (prestera):
- support SPAN port features (traffic mirroring)
- nexthop object offloading
- Microchip (sparx5):
- multicast forwarding offload
- QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- support RGMII cmode
- NXP (felix):
- standardized ethtool counters
- Microchip (lan966x):
- QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
- traffic policing and mirroring
- link aggregation / bonding offload
- QUSGMII PHY mode support
- Qualcomm 802.11ax WiFi (ath11k):
- cold boot calibration support on WCN6750
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- Wake-on-WLAN support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
- MediaTek WiFi (mt76):
- WiFi-to-Ethernet bridging offload for MT7986 chips
- RealTek WiFi (rtw89):
- P2P support"
* tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits)
eth: pse: add missing static inlines
once: rename _SLOW to _SLEEPABLE
net: pse-pd: add regulator based PSE driver
dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller
ethtool: add interface to interact with Ethernet Power Equipment
net: mdiobus: search for PSE nodes by parsing PHY nodes.
net: mdiobus: fwnode_mdiobus_register_phy() rework error handling
net: add framework to support Ethernet PSE and PDs devices
dt-bindings: net: phy: add PoDL PSE property
net: marvell: prestera: Propagate nh state from hw to kernel
net: marvell: prestera: Add neighbour cache accounting
net: marvell: prestera: add stub handler neighbour events
net: marvell: prestera: Add heplers to interact with fib_notifier_info
net: marvell: prestera: Add length macros for prestera_ip_addr
net: marvell: prestera: add delayed wq and flush wq on deinit
net: marvell: prestera: Add strict cleanup of fib arbiter
net: marvell: prestera: Add cleanup of allocated fib_nodes
net: marvell: prestera: Add router nexthops ABI
eth: octeon: fix build after netif_napi_add() changes
net/mlx5: E-Switch, Return EBUSY if can't get mode lock
...
|
||
|
Jakub Kicinski
|
e52f7c1ddf |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Merge in the left-over fixes before the net-next pull-request. Conflicts: drivers/net/ethernet/mediatek/mtk_ppe.c |
||
|
Linus Torvalds
|
8aebac8293 |
Merge tag 'rust-v6.1-rc1' of https://github.com/Rust-for-Linux/linux
Pull Rust introductory support from Kees Cook: "The tree has a recent base, but has fundamentally been in linux-next for a year and a half[1]. It's been updated based on feedback from the Kernel Maintainer's Summit, and to gain recent Reviewed-by: tags. Miguel is the primary maintainer, with me helping where needed/wanted. Our plan is for the tree to switch to the standard non-rebasing practice once this initial infrastructure series lands. The contents are the absolute minimum to get Rust code building in the kernel, with many more interfaces[2] (and drivers - NVMe[3], 9p[4], M1 GPU[5]) on the way. The initial support of Rust-for-Linux comes in roughly 4 areas: - Kernel internals (kallsyms expansion for Rust symbols, %pA format) - Kbuild infrastructure (Rust build rules and support scripts) - Rust crates and bindings for initial minimum viable build - Rust kernel documentation and samples Rust support has been in linux-next for a year and a half now, and the short log doesn't do justice to the number of people who have contributed both to the Linux kernel side but also to the upstream Rust side to support the kernel's needs. Thanks to these 173 people, and many more, who have been involved in all kinds of ways: Miguel Ojeda, Wedson Almeida Filho, Alex Gaynor, Boqun Feng, Gary Guo, Björn Roy Baron, Andreas Hindborg, Adam Bratschi-Kaye, Benno Lossin, Maciej Falkowski, Finn Behrens, Sven Van Asbroeck, Asahi Lina, FUJITA Tomonori, John Baublitz, Wei Liu, Geoffrey Thomas, Philip Herron, Arthur Cohen, David Faust, Antoni Boucher, Philip Li, Yujie Liu, Jonathan Corbet, Greg Kroah-Hartman, Paul E. McKenney, Josh Triplett, Kent Overstreet, David Gow, Alice Ryhl, Robin Randhawa, Kees Cook, Nick Desaulniers, Matthew Wilcox, Linus Walleij, Joe Perches, Michael Ellerman, Petr Mladek, Masahiro Yamada, Arnaldo Carvalho de Melo, Andrii Nakryiko, Konstantin Shelekhin, Rasmus Villemoes, Konstantin Ryabitsev, Stephen Rothwell, Andy Shevchenko, Sergey Senozhatsky, John Paul Adrian Glaubitz, David Laight, Nathan Chancellor, Jonathan Cameron, Daniel Latypov, Shuah Khan, Brendan Higgins, Julia Lawall, Laurent Pinchart, Geert Uytterhoeven, Akira Yokosawa, Pavel Machek, David S. Miller, John Hawley, James Bottomley, Arnd Bergmann, Christian Brauner, Dan Robertson, Nicholas Piggin, Zhouyi Zhou, Elena Zannoni, Jose E. Marchesi, Leon Romanovsky, Will Deacon, Richard Weinberger, Randy Dunlap, Paolo Bonzini, Roland Dreier, Mark Brown, Sasha Levin, Ted Ts'o, Steven Rostedt, Jarkko Sakkinen, Michal Kubecek, Marco Elver, Al Viro, Keith Busch, Johannes Berg, Jan Kara, David Sterba, Connor Kuehl, Andy Lutomirski, Andrew Lunn, Alexandre Belloni, Peter Zijlstra, Russell King, Eric W. Biederman, Willy Tarreau, Christoph Hellwig, Emilio Cobos Álvarez, Christian Poveda, Mark Rousskov, John Ericson, TennyZhuang, Xuanwo, Daniel Paoliello, Manish Goregaokar, comex, Josh Stone, Stephan Sokolow, Philipp Krones, Guillaume Gomez, Joshua Nelson, Mats Larsen, Marc Poulhiès, Samantha Miller, Esteban Blanc, Martin Schmidt, Martin Rodriguez Reboredo, Daniel Xu, Viresh Kumar, Bartosz Golaszewski, Vegard Nossum, Milan Landaverde, Dariusz Sosnowski, Yuki Okushi, Matthew Bakhtiari, Wu XiangCheng, Tiago Lam, Boris-Chengbiao Zhou, Sumera Priyadarsini, Viktor Garske, Niklas Mohrin, Nándor István Krácser, Morgan Bartlett, Miguel Cano, Léo Lanteri Thauvin, Julian Merkle, Andreas Reindl, Jiapeng Chong, Fox Chen, Douglas Su, Antonio Terceiro, SeongJae Park, Sergio González Collado, Ngo Iok Ui (Wu Yu Wei), Joshua Abraham, Milan, Daniel Kolsoi, ahomescu, Manas, Luis Gerhorst, Li Hongyu, Philipp Gesang, Russell Currey, Jalil David Salamé Messina, Jon Olson, Raghvender, Angelos, Kaviraj Kanagaraj, Paul Römer, Sladyn Nunes, Mauro Baladés, Hsiang-Cheng Yang, Abhik Jain, Hongyu Li, Sean Nash, Yuheng Su, Peng Hao, Anhad Singh, Roel Kluin, Sara Saa, Geert Stappers, Garrett LeSage, IFo Hancroft, and Linus Torvalds" Link: https://lwn.net/Articles/849849/ [1] Link: https://github.com/Rust-for-Linux/linux/commits/rust [2] Link: |
||
|
Jakub Kicinski
|
ad061cf422 |
Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says: ==================== pull-request: bpf 2022-10-03 We've added 10 non-merge commits during the last 23 day(s) which contain a total of 14 files changed, 130 insertions(+), 69 deletions(-). The main changes are: 1) Fix dynptr helper API to gate behind CAP_BPF given it was not intended for unprivileged BPF programs, from Kumar Kartikeya Dwivedi. 2) Fix need_wakeup flag inheritance from umem buffer pool for shared xsk sockets, from Jalal Mostafa. 3) Fix truncated last_member_type_id in btf_struct_resolve() which had a wrong storage type, from Lorenz Bauer. 4) Fix xsk back-pressure mechanism on tx when amount of produced descriptors to CQ is lower than what was grabbed from xsk tx ring, from Maciej Fijalkowski. 5) Fix wrong cgroup attach flags being displayed to effective progs, from Pu Lehui. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: xsk: Inherit need_wakeup flag for shared sockets bpf: Gate dynptr API behind CAP_BPF selftests/bpf: Adapt cgroup effective query uapi change bpftool: Fix wrong cgroup attach flags being assigned to effective progs bpf, cgroup: Reject prog_attach_flags array when effective query bpf: Ensure correct locking around vulnerable function find_vpid() bpf: btf: fix truncated last_member_type_id in btf_struct_resolve selftests/xsk: Add missing close() on netns fd xsk: Fix backpressure mechanism on Tx MAINTAINERS: Add include/linux/tnum.h to BPF CORE ==================== Link: https://lore.kernel.org/r/20221003201957.13149-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
a08d97a193 |
Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-10-03
We've added 143 non-merge commits during the last 27 day(s) which contain
a total of 151 files changed, 8321 insertions(+), 1402 deletions(-).
The main changes are:
1) Add kfuncs for PKCS#7 signature verification from BPF programs, from Roberto Sassu.
2) Add support for struct-based arguments for trampoline based BPF programs,
from Yonghong Song.
3) Fix entry IP for kprobe-multi and trampoline probes under IBT enabled, from Jiri Olsa.
4) Batch of improvements to veristat selftest tool in particular to add CSV output,
a comparison mode for CSV outputs and filtering, from Andrii Nakryiko.
5) Add preparatory changes needed for the BPF core for upcoming BPF HID support,
from Benjamin Tissoires.
6) Support for direct writes to nf_conn's mark field from tc and XDP BPF program
types, from Daniel Xu.
7) Initial batch of documentation improvements for BPF insn set spec, from Dave Thaler.
8) Add a new BPF_MAP_TYPE_USER_RINGBUF map which provides single-user-space-producer /
single-kernel-consumer semantics for BPF ring buffer, from David Vernet.
9) Follow-up fixes to BPF allocator under RT to always use raw spinlock for the BPF
hashtab's bucket lock, from Hou Tao.
10) Allow creating an iterator that loops through only the resources of one
task/thread instead of all, from Kui-Feng Lee.
11) Add support for kptrs in the per-CPU arraymap, from Kumar Kartikeya Dwivedi.
12) Add a new kfunc helper for nf to set src/dst NAT IP/port in a newly allocated CT
entry which is not yet inserted, from Lorenzo Bianconi.
13) Remove invalid recursion check for struct_ops for TCP congestion control BPF
programs, from Martin KaFai Lau.
14) Fix W^X issue with BPF trampoline and BPF dispatcher, from Song Liu.
15) Fix percpu_counter leakage in BPF hashtab allocation error path, from Tetsuo Handa.
16) Various cleanups in BPF selftests to use preferred ASSERT_* macros, from Wang Yufen.
17) Add invocation for cgroup/connect{4,6} BPF programs for ICMP pings, from YiFei Zhu.
18) Lift blinding decision under bpf_jit_harden = 1 to bpf_capable(), from Yauheni Kaliuta.
19) Various libbpf fixes and cleanups including a libbpf NULL pointer deref, from Xin Liu.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (143 commits)
net: netfilter: move bpf_ct_set_nat_info kfunc in nf_nat_bpf.c
Documentation: bpf: Add implementation notes documentations to table of contents
bpf, docs: Delete misformatted table.
selftests/xsk: Fix double free
bpftool: Fix error message of strerror
libbpf: Fix overrun in netlink attribute iteration
selftests/bpf: Fix spelling mistake "unpriviledged" -> "unprivileged"
samples/bpf: Fix typo in xdp_router_ipv4 sample
bpftool: Remove unused struct event_ring_info
bpftool: Remove unused struct btf_attach_point
bpf, docs: Add TOC and fix formatting.
bpf, docs: Add Clang note about BPF_ALU
bpf, docs: Move Clang notes to a separate file
bpf, docs: Linux byteswap note
bpf, docs: Move legacy packet instructions to a separate file
selftests/bpf: Check -EBUSY for the recurred bpf_setsockopt(TCP_CONGESTION)
bpf: tcp: Stop bpf_setsockopt(TCP_CONGESTION) in init ops to recur itself
bpf: Refactor bpf_setsockopt(TCP_CONGESTION) handling into another function
bpf: Move the "cdg" tcp-cc check to the common sol_tcp_sockopt()
bpf: Add __bpf_prog_{enter,exit}_struct_ops for struct_ops trampoline
...
====================
Link: https://lore.kernel.org/r/20221003194915.11847-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Linus Torvalds
|
dda0ba40da |
Merge tag 'nolibc.2022.09.30a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull nolibc updates from Paul McKenney:
"Most notably greatly improved testing. These tests are located in
tools/testing/selftests/nolibc. The output of "make help" is as
follows:
Supported targets under selftests/nolibc:
all call the "run" target below
help this help
sysroot create the nolibc sysroot here (uses $ARCH)
nolibc-test build the executable (uses $CC and $CROSS_COMPILE)
initramfs prepare the initramfs with nolibc-test
defconfig create a fresh new default config (uses $ARCH)
kernel (re)build the kernel with the initramfs (uses $ARCH)
run runs the kernel in QEMU after building it (uses $ARCH, $TEST)
rerun runs a previously prebuilt kernel in QEMU (uses $ARCH, $TEST)
clean clean the sysroot, initramfs, build and output files
The output file is "run.out". Test ranges may be passed using $TEST.
Currently using the following variables:
ARCH = x86
CROSS_COMPILE =
CC = gcc
OUTPUT = /home/git/linux-rcu/tools/testing/selftests/nolibc/
TEST =
QEMU_ARCH = x86_64 [determined from $ARCH]
IMAGE_NAME = bzImage [determined from $ARCH]
The output of a successful x86 "make run" is currently as follows,
with kernel build output omitted:
$ make run
71 test(s) passed."
* tag 'nolibc.2022.09.30a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
selftests/nolibc: Avoid generated files being committed
selftests/nolibc: add a "help" target
selftests/nolibc: "sysroot" target installs a local copy of the sysroot
selftests/nolibc: add a "run" target to start the kernel in QEMU
selftests/nolibc: add a "defconfig" target
selftests/nolibc: add a "kernel" target to build the kernel with the initramfs
selftests/nolibc: support glibc as well
selftests/nolibc: condition some tests on /proc existence
selftests/nolibc: recreate and populate /dev and /proc if missing
selftests/nolibc: on x86, support exiting with isa-debug-exit
selftests/nolibc: exit with poweroff on success when getpid() == 1
selftests/nolibc: add a few tests for some libc functions
selftests/nolibc: implement a few tests for various syscalls
selftests/nolibc: support a test definition format
selftests/nolibc: add basic infrastructure to ease creation of nolibc tests
tools/nolibc: make sys_mmap() automatically use the right __NR_mmap definition
tools/nolibc: fix build warning in sys_mmap() when my_syscall6 is not defined
tools/nolibc: make argc 32-bit in riscv startup code
|
||
|
Jakub Kicinski
|
accc3b4a57 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Kui-Feng Lee
|
21fb6f2aa3 |
bpf: Handle bpf_link_info for the parameterized task BPF iterators.
Add new fields to bpf_link_info that users can query it through bpf_obj_get_info_by_fd(). Signed-off-by: Kui-Feng Lee <kuifeng@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/bpf/20220926184957.208194-3-kuifeng@fb.com |
||
|
Kui-Feng Lee
|
f0d74c4da1 |
bpf: Parameterize task iterators.
Allow creating an iterator that loops through resources of one thread/process. People could only create iterators to loop through all resources of files, vma, and tasks in the system, even though they were interested in only the resources of a specific task or process. Passing the additional parameters, people can now create an iterator to go through all resources or only the resources of a task. Signed-off-by: Kui-Feng Lee <kuifeng@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/bpf/20220926184957.208194-2-kuifeng@fb.com |
||
|
Miguel Ojeda
|
b8a94bfb33 |
kallsyms: increase maximum kernel symbol length to 512
Rust symbols can become quite long due to namespacing introduced
by modules, types, traits, generics, etc. For instance,
the following code:
pub mod my_module {
pub struct MyType;
pub struct MyGenericType<T>(T);
pub trait MyTrait {
fn my_method() -> u32;
}
impl MyTrait for MyGenericType<MyType> {
fn my_method() -> u32 {
42
}
}
}
generates a symbol of length 96 when using the upcoming v0 mangling scheme:
_RNvXNtCshGpAVYOtgW1_7example9my_moduleINtB2_13MyGenericTypeNtB2_6MyTypeENtB2_7MyTrait9my_method
At the moment, Rust symbols may reach up to 300 in length.
Setting 512 as the maximum seems like a reasonable choice to
keep some headroom.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Co-developed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Gary Guo <gary@garyguo.net>
Co-developed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
||
|
Christophe JAILLET
|
73dfe93ea1 |
headers: Remove some left-over license text
Remove some left-over from commit
|
||
|
Jiri Olsa
|
0e253f7e55 |
bpf: Return value in kprobe get_func_ip only for entry address
Changing return value of kprobe's version of bpf_get_func_ip to return zero if the attach address is not on the function's entry point. For kprobes attached in the middle of the function we can't easily get to the function address especially now with the CONFIG_X86_KERNEL_IBT support. If user cares about current IP for kprobes attached within the function body, they can get it with PT_REGS_IP(ctx). Suggested-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Martynas Pumputis <m@lambda.lt> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20220926153340.1621984-6-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Linus Torvalds
|
3800a713b6 |
Merge tag 'mm-hotfixes-stable-2022-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull last (?) hotfixes from Andrew Morton: "26 hotfixes. 8 are for issues which were introduced during this -rc cycle, 18 are for earlier issues, and are cc:stable" * tag 'mm-hotfixes-stable-2022-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (26 commits) x86/uaccess: avoid check_object_size() in copy_from_user_nmi() mm/page_isolation: fix isolate_single_pageblock() isolation behavior mm,hwpoison: check mm when killing accessing process mm/hugetlb: correct demote page offset logic mm: prevent page_frag_alloc() from corrupting the memory mm: bring back update_mmu_cache() to finish_fault() frontswap: don't call ->init if no ops are registered mm/huge_memory: use pfn_to_online_page() in split_huge_pages_all() mm: fix madivse_pageout mishandling on non-LRU page powerpc/64s/radix: don't need to broadcast IPI for radix pmd collapse flush mm: gup: fix the fast GUP race against THP collapse mm: fix dereferencing possible ERR_PTR vmscan: check folio_test_private(), not folio_get_private() mm: fix VM_BUG_ON in __delete_from_swap_cache() tools: fix compilation after gfp_types.h split mm/damon/dbgfs: fix memory leak when using debugfs_lookup() mm/migrate_device.c: copy pte dirty bit to page mm/migrate_device.c: add missing flush_cache_page() mm/migrate_device.c: flush TLB while holding PTL x86/mm: disable instrumentations of mm/pgprot.c ... |
||
|
Jakub Kicinski
|
0140a7168f |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
drivers/net/ethernet/freescale/fec.h |
||
|
David Vernet
|
2057156738 |
bpf: Add bpf_user_ringbuf_drain() helper
In a prior change, we added a new BPF_MAP_TYPE_USER_RINGBUF map type which
will allow user-space applications to publish messages to a ring buffer
that is consumed by a BPF program in kernel-space. In order for this
map-type to be useful, it will require a BPF helper function that BPF
programs can invoke to drain samples from the ring buffer, and invoke
callbacks on those samples. This change adds that capability via a new BPF
helper function:
bpf_user_ringbuf_drain(struct bpf_map *map, void *callback_fn, void *ctx,
u64 flags)
BPF programs may invoke this function to run callback_fn() on a series of
samples in the ring buffer. callback_fn() has the following signature:
long callback_fn(struct bpf_dynptr *dynptr, void *context);
Samples are provided to the callback in the form of struct bpf_dynptr *'s,
which the program can read using BPF helper functions for querying
struct bpf_dynptr's.
In order to support bpf_ringbuf_drain(), a new PTR_TO_DYNPTR register
type is added to the verifier to reflect a dynptr that was allocated by
a helper function and passed to a BPF program. Unlike PTR_TO_STACK
dynptrs which are allocated on the stack by a BPF program, PTR_TO_DYNPTR
dynptrs need not use reference tracking, as the BPF helper is trusted to
properly free the dynptr before returning. The verifier currently only
supports PTR_TO_DYNPTR registers that are also DYNPTR_TYPE_LOCAL.
Note that while the corresponding user-space libbpf logic will be added
in a subsequent patch, this patch does contain an implementation of the
.map_poll() callback for BPF_MAP_TYPE_USER_RINGBUF maps. This
.map_poll() callback guarantees that an epoll-waiting user-space
producer will receive at least one event notification whenever at least
one sample is drained in an invocation of bpf_user_ringbuf_drain(),
provided that the function is not invoked with the BPF_RB_NO_WAKEUP
flag. If the BPF_RB_FORCE_WAKEUP flag is provided, a wakeup
notification is sent even if no sample was drained.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220920000100.477320-3-void@manifault.com
|
||
|
David Vernet
|
583c1f4201 |
bpf: Define new BPF_MAP_TYPE_USER_RINGBUF map type
We want to support a ringbuf map type where samples are published from user-space, to be consumed by BPF programs. BPF currently supports a kernel -> user-space circular ring buffer via the BPF_MAP_TYPE_RINGBUF map type. We'll need to define a new map type for user-space -> kernel, as none of the helpers exported for BPF_MAP_TYPE_RINGBUF will apply to a user-space producer ring buffer, and we'll want to add one or more helper functions that would not apply for a kernel-producer ring buffer. This patch therefore adds a new BPF_MAP_TYPE_USER_RINGBUF map type definition. The map type is useless in its current form, as there is no way to access or use it for anything until we one or more BPF helpers. A follow-on patch will therefore add a new helper function that allows BPF programs to run callbacks on samples that are published to the ring buffer. Signed-off-by: David Vernet <void@manifault.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220920000100.477320-2-void@manifault.com |
||
|
Pu Lehui
|
0e426a3ae0 |
bpf, cgroup: Reject prog_attach_flags array when effective query
Attach flags is only valid for attached progs of this layer cgroup,
but not for effective progs. For querying with EFFECTIVE flags,
exporting attach flags does not make sense. So when effective query,
we reject prog_attach_flags array and don't need to populate it.
Also we limit attach_flags to output 0 during effective query.
Fixes:
|
||
|
Ben Hutchings
|
95363747a6 |
tools/include/uapi: Fix <asm/errno.h> for parisc and xtensa
tools/include/uapi/asm/errno.h currently attempts to include non-existent arch-specific errno.h header for xtensa. Remove this case so that <asm-generic/errno.h> is used instead, and add the missing arch-specific header for parisc. References: https://buildd.debian.org/status/fetch.php?pkg=linux&arch=ia64&ver=5.8.3-1%7Eexp1&stamp=1598340829&raw=1 Signed-off-by: Ben Hutchings <benh@debian.org> Signed-off-by: Salvatore Bonaccorso <carnil@debian.org> Cc: <stable@vger.kernel.org> # 5.10+ Signed-off-by: Helge Deller <deller@gmx.de> |
||
|
Matthew Wilcox (Oracle)
|
283c05f66d |
tools: fix compilation after gfp_types.h split
When gfp_types.h was split from gfp.h, it broke the radix test suite. Fix
the test suite by using gfp_types.h in the tools gfp.h header.
Link: https://lkml.kernel.org/r/20220902191923.1735933-1-willy@infradead.org
Fixes:
|
||
|
Yonghong Song
|
27ed9353ae |
bpf: Update descriptions for helpers bpf_get_func_arg[_cnt]()
Now instead of the number of arguments, the number of registers holding argument values are stored in trampoline. Update the description of bpf_get_func_arg[_cnt]() helpers. Previous programs without struct arguments should continue to work as usual. Signed-off-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/r/20220831152657.2078805-1-yhs@fb.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Paolo Abeni
|
2786bcff28 |
Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says: ==================== pull-request: bpf-next 2022-09-05 The following pull-request contains BPF updates for your *net-next* tree. We've added 106 non-merge commits during the last 18 day(s) which contain a total of 159 files changed, 5225 insertions(+), 1358 deletions(-). There are two small merge conflicts, resolve them as follows: 1) tools/testing/selftests/bpf/DENYLIST.s390x Commit |
||
|
Shmulik Ladkani
|
44c51472be |
bpf: Support getting tunnel flags
Existing 'bpf_skb_get_tunnel_key' extracts various tunnel parameters
(id, ttl, tos, local and remote) but does not expose ip_tunnel_info's
tun_flags to the BPF program.
It makes sense to expose tun_flags to the BPF program.
Assume for example multiple GRE tunnels maintained on a single GRE
interface in collect_md mode. The program expects origins to initiate
over GRE, however different origins use different GRE characteristics
(e.g. some prefer to use GRE checksum, some do not; some pass a GRE key,
some do not, etc..).
A BPF program getting tun_flags can therefore remember the relevant
flags (e.g. TUNNEL_CSUM, TUNNEL_SEQ...) for each initiating remote. In
the reply path, the program can use 'bpf_skb_set_tunnel_key' in order
to correctly reply to the remote, using similar characteristics, based
on the stored tunnel flags.
Introduce BPF_F_TUNINFO_FLAGS flag for bpf_skb_get_tunnel_key. If
specified, 'bpf_tunnel_key->tunnel_flags' is set with the tun_flags.
Decided to use the existing unused 'tunnel_ext' as the storage for the
'tunnel_flags' in order to avoid changing bpf_tunnel_key's layout.
Also, the following has been considered during the design:
1. Convert the "interesting" internal TUNNEL_xxx flags back to BPF_F_yyy
and place into the new 'tunnel_flags' field. This has 2 drawbacks:
- The BPF_F_yyy flags are from *set_tunnel_key* enumeration space,
e.g. BPF_F_ZERO_CSUM_TX. It is awkward that it is "returned" into
tunnel_flags from a *get_tunnel_key* call.
- Not all "interesting" TUNNEL_xxx flags can be mapped to existing
BPF_F_yyy flags, and it doesn't make sense to create new BPF_F_yyy
flags just for purposes of the returned tunnel_flags.
2. Place key.tun_flags into 'tunnel_flags' but mask them, keeping only
"interesting" flags. That's ok, but the drawback is that what's
"interesting" for my usecase might be limiting for other usecases.
Therefore I decided to expose what's in key.tun_flags *as is*, which seems
most flexible. The BPF user can just choose to ignore bits he's not
interested in. The TUNNEL_xxx are also UAPI, so no harm exposing them
back in the get_tunnel_key call.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220831144010.174110-1-shmulik.ladkani@gmail.com
|
||
|
Willy Tarreau
|
364702f755 |
tools/nolibc: make sys_mmap() automatically use the right __NR_mmap definition
__NR_mmap2 was used for i386 but it's also needed for other archs such as RISCV32 or ARM. Let's decide to use it based on the __NR_mmap2 definition as it's not defined on other archs. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> |
||
|
Willy Tarreau
|
8b53e83b08 |
tools/nolibc: fix build warning in sys_mmap() when my_syscall6 is not defined
We return -ENOSYS when there's no syscall6() operation, but we must cast it to void* to avoid a warning. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> |
||
|
Willy Tarreau
|
a30d551f34 |
tools/nolibc: make argc 32-bit in riscv startup code
The "ld a0, 0(sp)" instruction doesn't build on RISCV32 because that would load a 64-bit value into a 32-bit register. But argc 32-bit, not 64, so we ought to use "lw" here. Tested on both RISCV32 and RISCV64. Cc: Pranith Kumar <bobby.prani@gmail.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> |
||
|
Quentin Monnet
|
aa75622c3b |
bpf: Fix a few typos in BPF helpers documentation
Address a few typos in the documentation for the BPF helper functions. They were reported by Jakub [0], who ran spell checkers on the generated man page [1]. [0] https://lore.kernel.org/linux-man/d22dcd47-023c-8f52-d369-7b5308e6c842@gmail.com/T/#mb02e7d4b7fb61d98fa914c77b581184e9a9537af [1] https://lore.kernel.org/linux-man/eb6a1e41-c48e-ac45-5154-ac57a2c76108@gmail.com/T/#m4a8d1b003616928013ffcd1450437309ab652f9f v3: Do not copy unrelated (and breaking) elements to tools/ header v2: Turn a ',' into a ';' Reported-by: Jakub Wilk <jwilk@jwilk.net> Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220825220806.107143-1-quentin@isovalent.com |
||
|
Hao Luo
|
d4ffb6f39f |
bpf: Add CGROUP prefix to cgroup_iter_order
bpf_cgroup_iter_order is globally visible but the entries do not have CGROUP prefix. As requested by Andrii, put a CGROUP in the names in bpf_cgroup_iter_order. This patch fixes two previous commits: one introduced the API and the other uses the API in bpf selftest (that is, the selftest cgroup_hierarchical_stats). I tested this patch via the following command: test_progs -t cgroup,iter,btf_dump Fixes: |
||
|
Jakub Kicinski
|
880b0dd94f |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
drivers/net/ethernet/mellanox/mlx5/core/en_fs.c |
||
|
Hao Luo
|
d4ccaf58a8 |
bpf: Introduce cgroup iter
Cgroup_iter is a type of bpf_iter. It walks over cgroups in four modes: - walking a cgroup's descendants in pre-order. - walking a cgroup's descendants in post-order. - walking a cgroup's ancestors. - process only the given cgroup. When attaching cgroup_iter, one can set a cgroup to the iter_link created from attaching. This cgroup is passed as a file descriptor or cgroup id and serves as the starting point of the walk. If no cgroup is specified, the starting point will be the root cgroup v2. For walking descendants, one can specify the order: either pre-order or post-order. For walking ancestors, the walk starts at the specified cgroup and ends at the root. One can also terminate the walk early by returning 1 from the iter program. Note that because walking cgroup hierarchy holds cgroup_mutex, the iter program is called with cgroup_mutex held. Currently only one session is supported, which means, depending on the volume of data bpf program intends to send to user space, the number of cgroups that can be walked is limited. For example, given the current buffer size is 8 * PAGE_SIZE, if the program sends 64B data for each cgroup, assuming PAGE_SIZE is 4kb, the total number of cgroups that can be walked is 512. This is a limitation of cgroup_iter. If the output data is larger than the kernel buffer size, after all data in the kernel buffer is consumed by user space, the subsequent read() syscall will signal EOPNOTSUPP. In order to work around, the user may have to update their program to reduce the volume of data sent to output. For example, skip some uninteresting cgroups. In future, we may extend bpf_iter flags to allow customizing buffer size. Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Hao Luo <haoluo@google.com> Link: https://lore.kernel.org/r/20220824233117.1312810-2-haoluo@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Stanislav Fomichev
|
2172fb8007 |
bpf: update bpf_{g,s}et_retval documentation
* replace 'syscall' with 'upper layers', still mention that it's being exported via syscall errno * describe what happens in set_retval(-EPERM) + return 1 * describe what happens with bind's 'return 3' Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/20220823222555.523590-5-sdf@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Shmulik Ladkani
|
91350fe152 |
bpf, flow_dissector: Introduce BPF_FLOW_DISSECTOR_CONTINUE retcode for bpf progs
Currently, attaching BPF_PROG_TYPE_FLOW_DISSECTOR programs completely replaces the flow-dissector logic with custom dissection logic. This forces implementors to write programs that handle dissection for any flows expected in the namespace. It makes sense for flow-dissector BPF programs to just augment the dissector with custom logic (e.g. dissecting certain flows or custom protocols), while enjoying the broad capabilities of the standard dissector for any other traffic. Introduce BPF_FLOW_DISSECTOR_CONTINUE retcode. Flow-dissector BPF programs may return this to indicate no dissection was made, and fallback to the standard dissector is requested. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Stanislav Fomichev <sdf@google.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20220821113519.116765-3-shmulik.ladkani@gmail.com |
||
|
Yang Jihong
|
cfd2b5c110 |
perf tools: Fix compile error for x86
Commit |
||
|
Namhyung Kim
|
65ba872a69 |
tools headers UAPI: Sync linux/perf_event.h with the kernel sources
To pick the trivial change in:
|
||
|
Arnaldo Carvalho de Melo
|
898d240346 |
tools include UAPI: Sync linux/vhost.h with the kernel sources
To get the changes in:
|
||
|
Arnaldo Carvalho de Melo
|
bf465ca809 |
tools headers UAPI: Sync linux/kvm.h with the kernel sources
To pick the changes in: |
||
|
Arnaldo Carvalho de Melo
|
54cd4cde7c |
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
To pick up the changes in: |
||
|
Arnaldo Carvalho de Melo
|
fabe0c61d8 |
tools headers UAPI: Sync linux/fscrypt.h with the kernel sources
To pick the changes from:
|
||
|
Jakub Kicinski
|
268603d79c |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
3f5f728a72 |
Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Andrii Nakryiko says:
====================
bpf-next 2022-08-17
We've added 45 non-merge commits during the last 14 day(s) which contain
a total of 61 files changed, 986 insertions(+), 372 deletions(-).
The main changes are:
1) New bpf_ktime_get_tai_ns() BPF helper to access CLOCK_TAI, from Kurt
Kanzenbach and Jesper Dangaard Brouer.
2) Few clean ups and improvements for libbpf 1.0, from Andrii Nakryiko.
3) Expose crash_kexec() as kfunc for BPF programs, from Artem Savkov.
4) Add ability to define sleepable-only kfuncs, from Benjamin Tissoires.
5) Teach libbpf's bpf_prog_load() and bpf_map_create() to gracefully handle
unsupported names on old kernels, from Hangbin Liu.
6) Allow opting out from auto-attaching BPF programs by libbpf's BPF skeleton,
from Hao Luo.
7) Relax libbpf's requirement for shared libs to be marked executable, from
Henqgi Chen.
8) Improve bpf_iter internals handling of error returns, from Hao Luo.
9) Few accommodations in libbpf to support GCC-BPF quirks, from James Hilliard.
10) Fix BPF verifier logic around tracking dynptr ref_obj_id, from Joanne Koong.
11) bpftool improvements to handle full BPF program names better, from Manu
Bretelle.
12) bpftool fixes around libcap use, from Quentin Monnet.
13) BPF map internals clean ups and improvements around memory allocations,
from Yafang Shao.
14) Allow to use cgroup_get_from_file() on cgroupv1, allowing BPF cgroup
iterator to work on cgroupv1, from Yosry Ahmed.
15) BPF verifier internal clean ups, from Dave Marchevsky and Joanne Koong.
16) Various fixes and clean ups for selftests/bpf and vmtest.sh, from Daniel
Xu, Artem Savkov, Joanne Koong, Andrii Nakryiko, Shibin Koikkara Reeny.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (45 commits)
selftests/bpf: Few fixes for selftests/bpf built in release mode
libbpf: Clean up deprecated and legacy aliases
libbpf: Streamline bpf_attr and perf_event_attr initialization
libbpf: Fix potential NULL dereference when parsing ELF
selftests/bpf: Tests libbpf autoattach APIs
libbpf: Allows disabling auto attach
selftests/bpf: Fix attach point for non-x86 arches in test_progs/lsm
libbpf: Making bpf_prog_load() ignore name if kernel doesn't support
selftests/bpf: Update CI kconfig
selftests/bpf: Add connmark read test
selftests/bpf: Add existing connection bpf_*_ct_lookup() test
bpftool: Clear errno after libcap's checks
bpf: Clear up confusion in bpf_skb_adjust_room()'s documentation
bpftool: Fix a typo in a comment
libbpf: Add names for auxiliary maps
bpf: Use bpf_map_area_alloc consistently on bpf map creation
bpf: Make __GFP_NOWARN consistent in bpf map creation
bpf: Use bpf_map_area_free instread of kvfree
bpf: Remove unneeded memset in queue_stack_map creation
libbpf: preserve errno across pr_warn/pr_info/pr_debug
...
====================
Link: https://lore.kernel.org/r/20220817215656.1180215-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Quentin Monnet
|
4961d07725 |
bpf: Clear up confusion in bpf_skb_adjust_room()'s documentation
Adding or removing room space _below_ layers 2 or 3, as the description mentions, is ambiguous. This was written with a mental image of the packet with layer 2 at the top, layer 3 under it, and so on. But it has led users to believe that it was on lower layers (before the beginning of the L2 and L3 headers respectively). Let's make it more explicit, and specify between which layers the room space is adjusted. Reported-by: Rumen Telbizov <rumen.telbizov@menlosecurity.com> Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220812153727.224500-3-quentin@isovalent.com |
||
|
Ali Saidi
|
2e21bcf051 |
perf tools: Sync addition of PERF_MEM_SNOOPX_PEER
Add a flag to the 'perf mem' data struct to signal that a request caused a cache-to-cache transfer of a line from a peer of the requestor and wasn't sourced from a lower cache level. The line being moved from one peer cache to another has latency and performance implications. On Arm64 Neoverse systems the data source can indicate a cache-to-cache transfer but not if the line is dirty or clean, so instead of overloading HITM define a new flag that indicates this type of transfer. Committer notes: This really is not syncing with the kernel since the patch to the kernel wasn't merged. But we're going ahead of this as it seems trivial and is just a matter of the perf kernel maintainers to give their ack or for us to find another way of expressing this in the perf records synthesized in userspace from the ARM64 hardware traces. Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Ali Saidi <alisaidi@amazon.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: German Gomez <german.gomez@arm.com> Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Like Xu <likexu@tencent.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Timothy Hayes <timothy.hayes@arm.com> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220811062451.435810-2-leo.yan@linaro.org Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Jesper Dangaard Brouer
|
c8996c98f7 |
bpf: Add BPF-helper for accessing CLOCK_TAI
Commit
|
||
|
Dave Marchevsky
|
ca34ce29fc |
bpf: Improve docstring for BPF_F_USER_BUILD_ID flag
Most tools which use bpf_get_stack or bpf_get_stackid symbolicate the stack - meaning the stack of addresses in the target process' address space is transformed into meaningful symbol names. The BPF_F_USER_BUILD_ID flag eases this process by finding the build_id of the file-backed vma which the address falls in and translating the address to an offset within the backing file. To be more specific, the offset is a "file offset" from the beginning of the backing file. The symbols in ET_DYN ELF objects have a st_value which is also described as an "offset" - but an offset in the process address space, relative to the base address of the object. It's necessary to translate between the "file offset" and "virtual address offset" during symbolication before they can be directly compared. Failure to do so can lead to confusing bugs, so this patch clarifies language in the documentation in an attempt to keep this from happening. Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220808164723.3107500-1-davemarchevsky@fb.com |
||
|
Linus Torvalds
|
4e23eeebb2 |
Merge tag 'bitmap-6.0-rc1' of https://github.com/norov/linux
Pull bitmap updates from Yury Norov: - fix the duplicated comments on bitmap_to_arr64() (Qu Wenruo) - optimize out non-atomic bitops on compile-time constants (Alexander Lobakin) - cleanup bitmap-related headers (Yury Norov) - x86/olpc: fix 'logical not is only applied to the left hand side' (Alexander Lobakin) - lib/nodemask: inline wrappers around bitmap (Yury Norov) * tag 'bitmap-6.0-rc1' of https://github.com/norov/linux: (26 commits) lib/nodemask: inline next_node_in() and node_random() powerpc: drop dependency on <asm/machdep.h> in archrandom.h x86/olpc: fix 'logical not is only applied to the left hand side' lib/cpumask: move some one-line wrappers to header file headers/deps: mm: align MANITAINERS and Docs with new gfp.h structure headers/deps: mm: Split <linux/gfp_types.h> out of <linux/gfp.h> headers/deps: mm: Optimize <linux/gfp.h> header dependencies lib/cpumask: move trivial wrappers around find_bit to the header lib/cpumask: change return types to unsigned where appropriate cpumask: change return types to bool where appropriate lib/bitmap: change type of bitmap_weight to unsigned long lib/bitmap: change return types to bool where appropriate arm: align find_bit declarations with generic kernel iommu/vt-d: avoid invalid memory access via node_online(NUMA_NO_NODE) lib/test_bitmap: test the tail after bitmap_to_arr64() lib/bitmap: fix off-by-one in bitmap_to_arr64() lib: test_bitmap: add compile-time optimization/evaluations assertions bitmap: don't assume compiler evaluates small mem*() builtins calls net/ice: fix initializing the bitmap in the switch code bitops: let optimize out non-atomic bitops on compile-time constants ... |
||
|
Linus Torvalds
|
48a577dc1b |
Merge tag 'perf-tools-for-v6.0-2022-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools updates from Arnaldo Carvalho de Melo:
- Introduce 'perf lock contention' subtool, using new lock contention
tracepoints and using BPF for in kernel aggregation and then
userspace processing using the perf tooling infrastructure for
resolving symbols, target specification, etc.
Since the new lock contention tracepoints don't provide lock names,
get up to 8 stack traces and display the first non-lock function
symbol name as a caller:
$ perf lock report -F acquired,contended,avg_wait,wait_total
Name acquired contended avg wait total wait
update_blocked_a... 40 40 3.61 us 144.45 us
kernfs_fop_open+... 5 5 3.64 us 18.18 us
_nohz_idle_balance 3 3 2.65 us 7.95 us
tick_do_update_j... 1 1 6.04 us 6.04 us
ep_scan_ready_list 1 1 3.93 us 3.93 us
Supports the usual 'perf record' + 'perf report' workflow as well as
a BCC/bpftrace like mode where you start the tool and then press
control+C to get results:
$ sudo perf lock contention -b
^C
contended total wait max wait avg wait type caller
42 192.67 us 13.64 us 4.59 us spinlock queue_work_on+0x20
23 85.54 us 10.28 us 3.72 us spinlock worker_thread+0x14a
6 13.92 us 6.51 us 2.32 us mutex kernfs_iop_permission+0x30
3 11.59 us 10.04 us 3.86 us mutex kernfs_dop_revalidate+0x3c
1 7.52 us 7.52 us 7.52 us spinlock kthread+0x115
1 7.24 us 7.24 us 7.24 us rwlock:W sys_epoll_wait+0x148
2 7.08 us 3.99 us 3.54 us spinlock delayed_work_timer_fn+0x1b
1 6.41 us 6.41 us 6.41 us spinlock idle_balance+0xa06
2 2.50 us 1.83 us 1.25 us mutex kernfs_iop_lookup+0x2f
1 1.71 us 1.71 us 1.71 us mutex kernfs_iop_getattr+0x2c
...
- Add new 'perf kwork' tool to trace time properties of kernel work
(such as softirq, and workqueue), uses eBPF skeletons to collect info
in kernel space, aggregating data that then gets processed by the
userspace tool, e.g.:
# perf kwork report
Kwork Name | Cpu | Total Runtime | Count | Max runtime | Max runtime start | Max runtime end |
----------------------------------------------------------------------------------------------------
nvme0q5:130 | 004 | 1.101 ms | 49 | 0.051 ms | 26035.056403 s | 26035.056455 s |
amdgpu:162 | 002 | 0.176 ms | 9 | 0.046 ms | 26035.268020 s | 26035.268066 s |
nvme0q24:149 | 023 | 0.161 ms | 55 | 0.009 ms | 26035.655280 s | 26035.655288 s |
nvme0q20:145 | 019 | 0.090 ms | 33 | 0.014 ms | 26035.939018 s | 26035.939032 s |
nvme0q31:156 | 030 | 0.075 ms | 21 | 0.010 ms | 26035.052237 s | 26035.052247 s |
nvme0q8:133 | 007 | 0.062 ms | 12 | 0.021 ms | 26035.416840 s | 26035.416861 s |
nvme0q6:131 | 005 | 0.054 ms | 22 | 0.010 ms | 26035.199919 s | 26035.199929 s |
nvme0q19:144 | 018 | 0.052 ms | 14 | 0.010 ms | 26035.110615 s | 26035.110625 s |
nvme0q7:132 | 006 | 0.049 ms | 13 | 0.007 ms | 26035.125180 s | 26035.125187 s |
nvme0q18:143 | 017 | 0.033 ms | 14 | 0.007 ms | 26035.169698 s | 26035.169705 s |
nvme0q17:142 | 016 | 0.013 ms | 1 | 0.013 ms | 26035.565147 s | 26035.565160 s |
enp5s0-rx-0:164 | 006 | 0.004 ms | 4 | 0.002 ms | 26035.928882 s | 26035.928884 s |
enp5s0-tx-0:166 | 008 | 0.003 ms | 3 | 0.002 ms | 26035.870923 s | 26035.870925 s |
--------------------------------------------------------------------------------------------------------
See commit log messages for more examples with extra options to limit
the events time window, etc.
- Add support for new AMD IBS (Instruction Based Sampling) features:
With the DataSrc extensions, the source of data can be decoded among:
- Local L3 or other L1/L2 in CCX.
- A peer cache in a near CCX.
- Data returned from DRAM.
- A peer cache in a far CCX.
- DRAM address map with "long latency" bit set.
- Data returned from MMIO/Config/PCI/APIC.
- Extension Memory (S-Link, GenZ, etc - identified by the CS target
and/or address map at DF's choice).
- Peer Agent Memory.
- Support hardware tracing with Intel PT on guest machines, combining
the traces with the ones in the host machine.
- Add a "-m" option to 'perf buildid-list' to show kernel and modules
build-ids, to display all of the information needed to do external
symbolization of kernel stack traces, such as those collected by
bpf_get_stackid().
- Add arch TSC frequency information to perf.data file headers.
- Handle changes in the binutils disassembler function signatures in
perf, bpftool and bpf_jit_disasm (Acked by the bpftool maintainer).
- Fix building the perf perl binding with the newest gcc in distros
such as fedora rawhide, where some new warnings were breaking the
build as perf uses -Werror.
- Add 'perf test' entry for branch stack sampling.
- Add ARM SPE system wide 'perf test' entry.
- Add user space counter reading tests to 'perf test'.
- Build with python3 by default, if available.
- Add python converter script for the vendor JSON event files.
- Update vendor JSON files for most Intel cores.
- Add vendor JSON File for Intel meteorlake.
- Add Arm Cortex-A78C and X1C JSON vendor event files.
- Add workaround to symbol address reading from ELF files without phdr,
falling back to the previoous equation.
- Convert legacy map definition to BTF-defined in the perf BPF script
test.
- Rework prologue generation code to stop using libbpf deprecated APIs.
- Add default hybrid events for 'perf stat' on x86.
- Add topdown metrics in the default 'perf stat' on the hybrid machines
(big/little cores).
- Prefer sampled CPU when exporting JSON in 'perf data convert'
- Fix ('perf stat CSV output linter') and ("Check branch stack
sampling") 'perf test' entries on s390.
* tag 'perf-tools-for-v6.0-2022-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (169 commits)
perf stat: Refactor __run_perf_stat() common code
perf lock: Print the number of lost entries for BPF
perf lock: Add --map-nr-entries option
perf lock: Introduce struct lock_contention
perf scripting python: Do not build fail on deprecation warnings
genelf: Use HAVE_LIBCRYPTO_SUPPORT, not the never defined HAVE_LIBCRYPTO
perf build: Suppress openssl v3 deprecation warnings in libcrypto feature test
perf parse-events: Break out tracepoint and printing
perf parse-events: Don't #define YY_EXTRA_TYPE
tools bpftool: Don't display disassembler-four-args feature test
tools bpftool: Fix compilation error with new binutils
tools bpf_jit_disasm: Don't display disassembler-four-args feature test
tools bpf_jit_disasm: Fix compilation error with new binutils
tools perf: Fix compilation error with new binutils
tools include: add dis-asm-compat.h to handle version differences
tools build: Don't display disassembler-four-args feature test
tools build: Add feature test for init_disassemble_info API changes
perf test: Add ARM SPE system wide test
perf tools: Rework prologue generation code
perf bpf: Convert legacy map definition to BTF-defined
...
|
||
|
Linus Torvalds
|
3bd6e5854b |
Merge tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are three independent sets of changes:
- Sai Prakash Ranjan adds tracing support to the asm-generic version
of the MMIO accessors, which is intended to help understand
problems with device drivers and has been part of Qualcomm's vendor
kernels for many years
- A patch from Sebastian Siewior to rework the handling of IRQ stacks
in softirqs across architectures, which is needed for enabling
PREEMPT_RT
- The last patch to remove the CONFIG_VIRT_TO_BUS option and some of
the code behind that, after the last users of this old interface
made it in through the netdev, scsi, media and staging trees"
* tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
uapi: asm-generic: fcntl: Fix typo 'the the' in comment
arch/*/: remove CONFIG_VIRT_TO_BUS
soc: qcom: geni: Disable MMIO tracing for GENI SE
serial: qcom_geni_serial: Disable MMIO tracing for geni serial
asm-generic/io: Add logging support for MMIO accessors
KVM: arm64: Add a flag to disable MMIO trace for nVHE KVM
lib: Add register read/write tracing support
drm/meson: Fix overflow implicit truncation warnings
irqchip/tegra: Fix overflow implicit truncation warnings
coresight: etm4x: Use asm-generic IO memory barriers
arm64: io: Use asm-generic high level MMIO accessors
arch/*: Disable softirq stacks on PREEMPT_RT.
|
||
|
Linus Torvalds
|
f86d1fbbe7 |
Merge tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Paolo Abeni:
"Core:
- Refactor the forward memory allocation to better cope with memory
pressure with many open sockets, moving from a per socket cache to
a per-CPU one
- Replace rwlocks with RCU for better fairness in ping, raw sockets
and IP multicast router.
- Network-side support for IO uring zero-copy send.
- A few skb drop reason improvements, including codegen the source
file with string mapping instead of using macro magic.
- Rename reference tracking helpers to a more consistent netdev_*
schema.
- Adapt u64_stats_t type to address load/store tearing issues.
- Refine debug helper usage to reduce the log noise caused by bots.
BPF:
- Improve socket map performance, avoiding skb cloning on read
operation.
- Add support for 64 bits enum, to match types exposed by kernel.
- Introduce support for sleepable uprobes program.
- Introduce support for enum textual representation in libbpf.
- New helpers to implement synproxy with eBPF/XDP.
- Improve loop performances, inlining indirect calls when possible.
- Removed all the deprecated libbpf APIs.
- Implement new eBPF-based LSM flavor.
- Add type match support, which allow accurate queries to the eBPF
used types.
- A few TCP congetsion control framework usability improvements.
- Add new infrastructure to manipulate CT entries via eBPF programs.
- Allow for livepatch (KLP) and BPF trampolines to attach to the same
kernel function.
Protocols:
- Introduce per network namespace lookup tables for unix sockets,
increasing scalability and reducing contention.
- Preparation work for Wi-Fi 7 Multi-Link Operation (MLO) support.
- Add support to forciby close TIME_WAIT TCP sockets via user-space
tools.
- Significant performance improvement for the TLS 1.3 receive path,
both for zero-copy and not-zero-copy.
- Support for changing the initial MTPCP subflow priority/backup
status
- Introduce virtually contingus buffers for sockets over RDMA, to
cope better with memory pressure.
- Extend CAN ethtool support with timestamping capabilities
- Refactor CAN build infrastructure to allow building only the needed
features.
Driver API:
- Remove devlink mutex to allow parallel commands on multiple links.
- Add support for pause stats in distributed switch.
- Implement devlink helpers to query and flash line cards.
- New helper for phy mode to register conversion.
New hardware / drivers:
- Ethernet DSA driver for the rockchip mt7531 on BPI-R2 Pro.
- Ethernet DSA driver for the Renesas RZ/N1 A5PSW switch.
- Ethernet DSA driver for the Microchip LAN937x switch.
- Ethernet PHY driver for the Aquantia AQR113C EPHY.
- CAN driver for the OBD-II ELM327 interface.
- CAN driver for RZ/N1 SJA1000 CAN controller.
- Bluetooth: Infineon CYW55572 Wi-Fi plus Bluetooth combo device.
Drivers:
- Intel Ethernet NICs:
- i40e: add support for vlan pruning
- i40e: add support for XDP framented packets
- ice: improved vlan offload support
- ice: add support for PPPoE offload
- Mellanox Ethernet (mlx5)
- refactor packet steering offload for performance and scalability
- extend support for TC offload
- refactor devlink code to clean-up the locking schema
- support stacked vlans for bridge offloads
- use TLS objects pool to improve connection rate
- Netronome Ethernet NICs (nfp):
- extend support for IPv6 fields mangling offload
- add support for vepa mode in HW bridge
- better support for virtio data path acceleration (VDPA)
- enable TSO by default
- Microsoft vNIC driver (mana)
- add support for XDP redirect
- Others Ethernet drivers:
- bonding: add per-port priority support
- microchip lan743x: extend phy support
- Fungible funeth: support UDP segmentation offload and XDP xmit
- Solarflare EF100: add support for virtual function representors
- MediaTek SoC: add XDP support
- Mellanox Ethernet/IB switch (mlxsw):
- dropped support for unreleased H/W (XM router).
- improved stats accuracy
- unified bridge model coversion improving scalability (parts 1-6)
- support for PTP in Spectrum-2 asics
- Broadcom PHYs
- add PTP support for BCM54210E
- add support for the BCM53128 internal PHY
- Marvell Ethernet switches (prestera):
- implement support for multicast forwarding offload
- Embedded Ethernet switches:
- refactor OcteonTx MAC filter for better scalability
- improve TC H/W offload for the Felix driver
- refactor the Microchip ksz8 and ksz9477 drivers to share the
probe code (parts 1, 2), add support for phylink mac
configuration
- Other WiFi:
- Microchip wilc1000: diable WEP support and enable WPA3
- Atheros ath10k: encapsulation offload support
Old code removal:
- Neterion vxge ethernet driver: this is untouched since more than 10 years"
* tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1890 commits)
doc: sfp-phylink: Fix a broken reference
wireguard: selftests: support UML
wireguard: allowedips: don't corrupt stack when detecting overflow
wireguard: selftests: update config fragments
wireguard: ratelimiter: use hrtimer in selftest
net/mlx5e: xsk: Discard unaligned XSK frames on striding RQ
net: usb: ax88179_178a: Bind only to vendor-specific interface
selftests: net: fix IOAM test skip return code
net: usb: make USB_RTL8153_ECM non user configurable
net: marvell: prestera: remove reduntant code
octeontx2-pf: Reduce minimum mtu size to 60
net: devlink: Fix missing mutex_unlock() call
net/tls: Remove redundant workqueue flush before destroy
net: txgbe: Fix an error handling path in txgbe_probe()
net: dsa: Fix spelling mistakes and cleanup code
Documentation: devlink: add add devlink-selftests to the table of contents
dccp: put dccp_qpolicy_full() and dccp_qpolicy_push() in the same lock
net: ionic: fix error check for vlan flags in ionic_set_nic_features()
net: ice: fix error NETIF_F_HW_VLAN_CTAG_FILTER check in ice_vsi_sync_fltr()
nfp: flower: add support for tunnel offload without key ID
...
|
||
|
Linus Torvalds
|
e087437a6f |
Merge tag 'xarray-6.0' of git://git.infradead.org/users/willy/xarray
Pull XArray/IDR updates from Matthew Wilcox: - Add appropriate might_alloc() annotations to the XArray APIs - Document that the IDR is deprecated * tag 'xarray-6.0' of git://git.infradead.org/users/willy/xarray: IDR: Note that the IDR API is deprecated XArray: Add calls to might_alloc() |
||
|
Linus Torvalds
|
e2b5421007 |
Merge tag 'flexible-array-transformations-UAPI-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull uapi flexible array update from Gustavo Silva:
"A treewide patch that replaces zero-length arrays with flexible-array
members in UAPI. This has been baking in linux-next for 5 weeks now.
'-fstrict-flex-arrays=3' is coming and we need to land these changes
to prevent issues like these in the short future:
fs/minix/dir.c:337:3: warning: 'strcpy' will always overflow; destination buffer has size 0, but the source string has length 2 (including NUL byte) [-Wfortify-source]
strcpy(de3->name, ".");
^
Since these are all [0] to [] changes, the risk to UAPI is nearly
zero. If this breaks anything, we can use a union with a new member
name"
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836
* tag 'flexible-array-transformations-UAPI-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
treewide: uapi: Replace zero-length arrays with flexible-array members
|
||
|
Linus Torvalds
|
aad26f55f4 |
Merge tag 'docs-6.0' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"This was a moderately busy cycle for documentation, but nothing
all that earth-shaking:
- More Chinese translations, and an update to the Italian
translations.
The Japanese, Korean, and traditional Chinese translations
are more-or-less unmaintained at this point, instead.
- Some build-system performance improvements.
- The removal of the archaic submitting-drivers.rst document,
with the movement of what useful material that remained into
other docs.
- Improvements to sphinx-pre-install to, hopefully, give more
useful suggestions.
- A number of build-warning fixes
Plus the usual collection of typo fixes, updates, and more"
* tag 'docs-6.0' of git://git.lwn.net/linux: (92 commits)
docs: efi-stub: Fix paths for x86 / arm stubs
Docs/zh_CN: Update the translation of sched-stats to 5.19-rc8
Docs/zh_CN: Update the translation of pci to 5.19-rc8
Docs/zh_CN: Update the translation of pci-iov-howto to 5.19-rc8
Docs/zh_CN: Update the translation of usage to 5.19-rc8
Docs/zh_CN: Update the translation of testing-overview to 5.19-rc8
Docs/zh_CN: Update the translation of sparse to 5.19-rc8
Docs/zh_CN: Update the translation of kasan to 5.19-rc8
Docs/zh_CN: Update the translation of iio_configfs to 5.19-rc8
doc:it_IT: align Italian documentation
docs: Remove spurious tag from admin-guide/mm/overcommit-accounting.rst
Documentation: process: Update email client instructions for Thunderbird
docs: ABI: correct QEMU fw_cfg spec path
doc/zh_CN: remove submitting-driver reference from docs
docs: zh_TW: align to submitting-drivers removal
docs: zh_CN: align to submitting-drivers removal
docs: ko_KR: howto: remove reference to removed submitting-drivers
docs: ja_JP: howto: remove reference to removed submitting-drivers
docs: it_IT: align to submitting-drivers removal
docs: process: remove outdated submitting-drivers.rst
...
|