Pull thermal management fix from Zhang Rui:
"A single revert from a recently introduced problem.
Specifics:
Commit 7611fb6806 ("thermal: thermal_hwmon: Convert to
hwmon_device_register_with_info()"), which was introduced in 4.10-rc5,
uses new hwmon API. But this breaks some soc thermal driver because
the new hwmon API has a strict rule for the hwmon device name. Revert
the offending commit as a quick solution for 4.10"
* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
Revert "thermal: thermal_hwmon: Convert to hwmon_device_register_with_info()"
CORE_CTRL_ADDRESS is offset in register address space, it does not
make sense to OR it to derive the final address. It looks like its
a typo, so fix it.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
DIAG_TRANSFER_LIMIT is redefined with same value and comments
just below this entry, remove this duplicate entry.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Symbolic permissions are no longer recommended.
This patch changes the symbolic permissions in wil6210 driver
to octal permissions.
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Add an option to specify and override the A-BFT length when
starting an AP/PCP. See IEEE P802.11-2016, 10.38.5.
The abft_len must be set before starting AP/PCP. It is only
needed for diagnostics and certification.
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Add reporting of the association ID (AID) for each station
as part of the stations file in the debugfs.
Valid AID values are 1-254. 0 is reported if the AID
is unknown or not reported by firmware.
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Currently we do not have full support for broadcast from
a station inside a PBSS network.
We have a workaround where instead of broadcast we do a
unicast to every known station in the PBSS.
This workaround was performed only for P2P clients.
This fix will perform the broadcast workaround also for a
regular station inside a PBSS.
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
During reset sequence it is seen that device is generating an
interrupt eventhough interrupts are masked at device level.
Add workaround to disable the interrupts from host side during
reset and clear any pending interrupts before re-enabling
the interrupt.
Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
The code in wmi_call uses the wil->wmi_call completion
structure to wait for a reply.
In some scenarios, complete was called twice on the
completion structure. This happened mainly with a disconnect
event which can arrive both unsolicited and as a reply to
a disconnect request. In this case the completion structure
was left marked as "done" and the next wmi_call returned
immediately with a corrupted reply buffer. This caused
unexpected results including crashes.
Fix this by adding the missing call to reinit_completion.
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
WMI_ONLY FW is used for testing in production. It cannot be used for
scan/connect, etc.
In case FW reports this capability, driver will not allow interface up.
Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
__func__ is automatically added to printouts by dynamic debug
mechanism and by wil_info/wil_err macros.
Remove __func__ from debug printouts to avoid duplication.
Signed-off-by: Lazar Alexei <qca_ailizaro@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Driver may be used in platforms where some use sparrow cards while
other use sparrow-plus cards, where different FW image is needed.
Add the capability to load dedicated FW image in case sparrow-plus
card is detected and fallback to default image if such does not exist.
Signed-off-by: Lazar Alexei <qca_ailizaro@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
By default, AP SME is handled by driver/FW.
In case disable_ap_sme is true, driver doesn't turn-on
WIPHY_FLAG_HAVE_AP_SME and the responsibility for
AP SME is passed to user space.
With AP SME disabled, driver reports assoc request frame
to user space which is then responsible for sending assoc
response frame and for sending NL80211_CMD_NEW_STATION.
Driver also reports disassoc frame to user space
which should then send NL80211_CMD_DEL_STATION.
NL80211_CMD_SET_STATION with NL80211_STA_FLAG_AUTHORIZED
is used by user space to allow/disallow data transmit.
Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Quotacheck runs at mount time in situations where quota accounting must
be recalculated. In doing so, it uses bulkstat to visit every inode in
the filesystem. Historically, every inode processed during quotacheck
was released and immediately tagged for reclaim because quotacheck runs
before the superblock is marked active by the VFS. In other words,
the final iput() lead to an immediate ->destroy_inode() call, which
allowed the XFS background reclaim worker to start reclaiming inodes.
Commit 17c12bcd3 ("xfs: when replaying bmap operations, don't let
unlinked inodes get reaped") marks the XFS superblock active sooner as
part of the mount process to support caching inodes processed during log
recovery. This occurs before quotacheck and thus means all inodes
processed by quotacheck are inserted to the LRU on release. The
s_umount lock is held until the mount has completed and thus prevents
the shrinkers from operating on the sb. This means that quotacheck can
excessively populate the inode LRU and lead to OOM conditions on systems
without sufficient RAM.
Update the quotacheck bulkstat handler to set XFS_IGET_DONTCACHE on
inodes processed by quotacheck. This causes ->drop_inode() to return 1
and in turn causes iput_final() to evict the inode. This preserves the
original quotacheck behavior and prevents it from overloading the LRU
and running out of memory.
CC: stable@vger.kernel.org # v4.9
Reported-by: Martin Svec <martin.svec@zoner.cz>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Slava Shwartsman reported a warning in skb_try_coalesce(), when we
detect skb->truesize is completely wrong.
In his case, issue came from IPv6 reassembly coping with malicious
datagrams, that forced various pskb_may_pull() to reallocate a bigger
skb->head than the one allocated by NIC driver before entering GRO
layer.
Current code does not change skb->truesize, leaving this burden to
callers if they care enough.
Blindly changing skb->truesize in pskb_expand_head() is not
easy, as some producers might track skb->truesize, for example
in xmit path for back pressure feedback (sk->sk_wmem_alloc)
We can detect the cases where it should be safe to change
skb->truesize :
1) skb is not attached to a socket.
2) If it is attached to a socket, destructor is sock_edemux()
My audit gave only two callers doing their own skb->truesize
manipulation.
I had to remove skb parameter in sock_edemux macro when
CONFIG_INET is not set to avoid a compile error.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Slava Shwartsman <slavash@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Edward Cree says:
====================
sfc: encapsulated filters
This series adds support for setting up filters for encapsulated traffic on
SFC 8000-series adapters, which recognise VXLAN, GENEVE and NVGRE packets by
parsing packet headers. (VXLAN and GENEVE will only be recognised if the
driver on the primary PF has notified the firmware of relevant UDP ports,
which this driver does not yet do.)
While the driver currently has no way of using these filters for flow
steering, it is nonetheless necessary to insert catch-all (aka 'default')
filters to direct this traffic, similar to the existing unencapsulated uni-
and multi-cast catch-all filters, as otherwise the traffic will be dropped
by the NIC - implementation details of the hardware filtering mean that the
traffic will not get matched on outer MAC address to unencapsulated catch-
all filters. (Yes, this is a mess.)
Although this is, therefore, fixing a bug in the existing driver, it's a bug
which has existed since 8000 series support was added, and the fix involves
quite a big patch with an 'adding features' flavour to it, hence why this is
for net-next rather than net and stable.
v2: move netif_cond_dbg into netdevice.h and its own patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
8000 series adapters support filtering VXLAN, NVGRE and GENEVE traffic
based on inner fields, and when the NIC recognises such traffic, it
does not match unencapsulated traffic filters any more. So add catch-
all filters for encapsulated traffic on supporting platforms.
Although recognition of VXLAN and GENEVE is based on UDP ports, and thus
will not occur until the driver (on the primary PF) notifies the
firmware of UDP ports to use, NVGRE will always be recognised, hence
without this patch 8000 series adapters will drop all NVGRE traffic.
Partly based on patches by Jon Cooper <jcooper@solarflare.com>.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rationalise several debug-or-warnings printks using netif_cond_dbg
to make output more consistent.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For reporting things that may or may not be serious, depending on some
condition, netif_cond_dbg will check the condition and print the report
at either dbg (if the condition is true) or the specified level.
Suggested-by: Jon Cooper <jcooper@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the NIC is switched from full-featured to low-latency, encapsulated
filters are no longer available, and this causes errors. This patch
removes those filters from the filter table on restore.
Also, if filters which are removed by the above, or which we fail to
insert when restoring filters, were UC, MC or broadcast default
filters, invalidate the corresponding vlan->default_filters entry.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The stats member of struct frad_locl is used neither by the dlci nor the
sdla driver, so it might as well be removed.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's Broadcom PHY simply described as single-port
RGMII 10/100/1000BASE-T PHY. It requires disabling delay skew and GTXCLK
bits.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
With some gcc versions, we get a warning about the eicon driver,
and that currently shows up as the only remaining warning in one
of the build bots:
In file included from ../drivers/isdn/hardware/eicon/message.c:30:0:
eicon/message.c: In function 'mixer_notify_update':
eicon/platform.h:333:18: warning: array subscript is above array bounds [-Warray-bounds]
The code is easily changed to open-code the unusual PUT_WORD() line
causing this to avoid the warning.
Cc: stable@vger.kernel.org
Link: http://arm-soc.lixom.net/buildlogs/stable-rc/v4.4.45/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marc Kleine-Budde says:
====================
pull-request: can-next 2017-01-24
this is a pull request of 4 patches for net-next/master.
The first patch by Oliver Hartkopp adds a netlink API to configure the
interface termination of a CAN card. The next two patches are by me and
add a netlink API to query and configure CAN interfaces that only
support fixed bitrates. The last patch by Colin Ian King simplifies the
return path in the softing_cs driver's softingcs_probe() function.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This is adds support for the PHYs in the KSZ8795 5port managed switch.
It will allow to detect the link between the switch and the soc
and uses the same read_status functions as the KSZ8873MLL switch.
Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andreas Schultz says:
====================
various gtp fixes
I'm sorry for the compile error mess up in the last version.
It's no excuse for not test compiling, but the hunks got lost in
a rebase.
This is the part of the previous "simple gtp improvements" series
that Pablo indicated should go into net.
The addition of the module alias fixes genl family autoloading,
clearing the DF bit fixes a protocol violation in regard to the
specification and the netns comparison fixes a corner case of
cross netns recv.
v2->v3: fix compiler error introduced in rebase
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The use of the passed through netlink src_net to check for a
cross netns operation was wrong. Using the GTP socket and the
GTP netdevice is always correct (even if the netdev has been
moved to new netns after link creation).
Remove the now obsolete net field from gtp_dev.
Signed-off-by: Andreas Schultz <aschultz@tpip.net>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
3GPP TS 29.281 and 3GPP TS 29.060 imply that GTP-U packets should be
sent with the DF bit cleared. For example 3GPP TS 29.060, Release 8,
Section 13.2.2:
> Backbone router: Any router in the backbone may fragment the GTP
> packet if needed, according to IPv4.
Signed-off-by: Andreas Schultz <aschultz@tpip.net>
Acked-by: Harald Welte <laforge@netfilter.org>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unlike ipv4, this control socket is shared by all cpus so we cannot use
it as scratchpad area to annotate the mark that we pass to ip6_xmit().
Add a new parameter to ip6_xmit() to indicate the mark. The SCTP socket
family caches the flowi6 structure in the sctp_transport structure, so
we cannot use to carry the mark unless we later on reset it back, which
I discarded since it looks ugly to me.
Fixes: bf99b4ded5 ("tcp: fix mark propagation with fwmark_reflect enabled")
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The address generation mode for IPv6 link-local can only be configured
by netlink messages. This patch adds the ability to change the address
generation mode via sysctl.
v1 -> v2
Removed the rtnl lock and switch to use RCU lock to iterate through
the netdev list.
v2 -> v3
Removed the addrgenmode variable from the idev structure and use the
systcl storage for the flag.
Simplifed the logic for sysctl handling by removing the supported
for all operation.
Added support for more types of tunnel interfaces for link-local
address generation.
Based the patches from net-next.
v3 -> v4
Removed unnecessary whitespace changes.
Signed-off-by: Felix Jia <felix.jia@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 16e5cc6471 ("net: rework setup_tc ndo op to consume
general tc operand") changed the ndo_setup_tc() signature, but did not
update the comments in netdevice.h, so do that now.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On ACPI based systems where the topology is setup using the API
store_cpu_topology, at the moment we do not have necessary code
to parse cpu capacity and handle cpufreq notifier, thus
resulting in a kernel panic.
Stack:
init_cpu_capacity_callback+0xb4/0x1c8
notifier_call_chain+0x5c/0xa0
__blocking_notifier_call_chain+0x58/0xa0
blocking_notifier_call_chain+0x3c/0x50
cpufreq_set_policy+0xe4/0x328
cpufreq_init_policy+0x80/0x100
cpufreq_online+0x418/0x710
cpufreq_add_dev+0x118/0x180
subsys_interface_register+0xa4/0xf8
cpufreq_register_driver+0x1c0/0x298
cppc_cpufreq_init+0xdc/0x1000 [cppc_cpufreq]
do_one_initcall+0x5c/0x168
do_init_module+0x64/0x1e4
load_module+0x130c/0x14d0
SyS_finit_module+0x108/0x120
el0_svc_naked+0x24/0x28
Fixes: 7202bde8b7 ("arm64: parse cpu capacity-dmips-mhz from DT")
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Some improvements, bugfixes and new features:
* A bunch of cleanups here and there;
* A few simple bugfixes;
* Some more work in preparation for A000 family support;
* Add support for radiotap timestamps;
* Some work on our firmware debugging capabilities;
Pull drm fixes from Dave Airlie:
"This is the main request for rc6, since really the one earlier was the
rc5 one :-)
The main thing are the nouveau specific race fixes for the connector
locking bug we fixed in -next and reverted here as it has quite large
prereqs. These two fixes should solve the problem at that level and we
can fix it properly in 4.11
Otherwise i915 has a bunch of changes, one ABI change for GVT related
stuff, some VC4 leak fixes, one core fence fix and some AMD changes,
oh and one ast hang avoidance fix.
Hoping it calms down around now"
* tag 'drm-fixes-for-v4.10-rc6-part-two' of git://people.freedesktop.org/~airlied/linux: (25 commits)
drm/nouveau: Handle fbcon suspend/resume in seperate worker
drm/nouveau: Don't enabling polling twice on runtime resume
drm/ast: Fixed system hanged if disable P2A
Revert "drm/radeon: always apply pci shutdown callbacks"
drm/i915: reinstate call to trace_i915_vma_bind
drm/i915: Move atomic state free from out of fence release
drm/i915: Check for NULL atomic state in intel_crtc_disable_noatomic()
drm/i915: Fix calculation of rotated x and y offsets for planar formats
drm/i915: Don't init hpd polling for vlv and chv from runtime_suspend()
drm/i915: Don't leak edid in intel_crt_detect_ddc()
drm/i915: Release temporary load-detect state upon switching
drm/i915: prevent crash with .disable_display parameter
drm/i915: Avoid drm_atomic_state_put(NULL) in intel_display_resume
MAINTAINERS: update new mail list for intel gvt driver
drm/i915/gvt: Fix kmem_cache_create() name
drm/i915/gvt/kvmgt: mdev ABI is available_instances, not available_instance
drm/amdgpu: fix unload driver issue for virtual display
drm/amdgpu: check ring being ready before using
drm/vc4: Return -EINVAL on the overflow checks failing.
drm/vc4: Fix an integer overflow in temporary allocation layout.
...
More fixes than I'd like at this stage, but I think the holidays and
conferences have delayed finding and fixing the stuff a bit. Almost all
of them have Fixes: tags, so it's not just random fixes, we can point
fingers at the commits that broke stuff.
There's an ABI fix to GVT from Alex, before we go on an release a kernel
with the wrong attribute name.
* tag 'drm-intel-fixes-2017-01-26' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: reinstate call to trace_i915_vma_bind
drm/i915: Move atomic state free from out of fence release
drm/i915: Check for NULL atomic state in intel_crtc_disable_noatomic()
drm/i915: Fix calculation of rotated x and y offsets for planar formats
drm/i915: Don't init hpd polling for vlv and chv from runtime_suspend()
drm/i915: Don't leak edid in intel_crt_detect_ddc()
drm/i915: Release temporary load-detect state upon switching
drm/i915: prevent crash with .disable_display parameter
drm/i915: Avoid drm_atomic_state_put(NULL) in intel_display_resume
MAINTAINERS: update new mail list for intel gvt driver
drm/i915/gvt: Fix kmem_cache_create() name
drm/i915/gvt/kvmgt: mdev ABI is available_instances, not available_instance
drm/i915/gvt: Fix relocation of shadow bb
drm/i915/gvt: Enable the shadow batch buffer
Pull ACPI fixes from Rafael Wysocki:
"These fix two regressions introduced recently, one by reverting the
problematic commit and one by fixing up locking in the ACPICA core.
Specifics:
- Revert a recent change that added an ACPI video blacklist entry for
HP Pavilion dv6 as it turned to introduce backlight handling
regressions on some systems (Hans de Goede).
- Fix locking in the ACPICA core to avoid deadlocks related to table
loading that were exposed by a recent change in that area (Lv
Zheng)"
* tag 'acpi-4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI / video: Add force_native quirk for HP Pavilion dv6"
ACPICA: Tables: Fix hidden logic related to acpi_tb_install_standard_table()
Pull power management fixes from Rafael Wysocki:
"These fix two regressions introduced recently, one by reverting the
problematic commit and one by fixing up the behavior in an overlooked
case.
Specifics:
- Revert the recent change that caused suspend-to-idle to be used as
the default suspend method on systems where it is indicated to be
efficient by the ACPI tables, as that turned out to be premature
and introduced suspend regressions on some systems with missing
power management support in device drivers (Rafael Wysocki).
- Fix up the intel_pstate driver to take changes of the global limits
via sysfs correctly when the performance policy is used which has
been broken by a recent change in it (Srinivas Pandruvada)"
* tag 'pm-4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Fix sysfs limits enforcement for performance policy
Revert "PM / sleep / ACPI: Use the ACPI_FADT_LOW_POWER_S0 flag"
Resuming from RPM can happen while already holding
dev->mode_config.mutex. This means we can't actually handle fbcon in
any RPM resume workers, since restoring fbcon requires grabbing
dev->mode_config.mutex again. So move the fbcon suspend/resume code into
it's own worker, and rely on that instead to avoid deadlocking.
This fixes more deadlocks for runtime suspending the GPU on the ThinkPad
W541. Reproduction recipe:
- Get a machine with both optimus and a nvidia card with connectors
attached to it
- Wait for the nvidia GPU to suspend
- Attempt to manually reprobe any of the connectors on the nvidia GPU
using sysfs
- *deadlock*
[airlied: use READ_ONCE to address Hans's comment]
Signed-off-by: Lyude <lyude@redhat.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Kilian Singer <kilian.singer@quantumtechnology.info>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: David Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
As it turns out, on cards that actually have CRTCs on them we're already
calling drm_kms_helper_poll_enable(drm_dev) from
nouveau_display_resume() before we call it in
nouveau_pmops_runtime_resume(). This leads us to accidentally trying to
enable polling twice, which results in a potential deadlock between the
RPM locks and drm_dev->mode_config.mutex if we end up trying to enable
polling the second time while output_poll_execute is running and holding
the mode_config lock. As such, make sure we only enable polling in
nouveau_pmops_runtime_resume() if we need to.
This fixes hangs observed on the ThinkPad W541
Signed-off-by: Lyude <lyude@redhat.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Kilian Singer <kilian.singer@quantumtechnology.info>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: David Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The original ast driver will access some BMC configuration through P2A bridge
that can be disabled since AST2300 and after.
It will cause system hanged if P2A bridge is disabled.
Here is the update to fix it.
Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This pull request brings in a few little error checking fixes and one
slow memory leak fix.
* tag 'drm-vc4-fixes-2017-01-23' of https://github.com/anholt/linux:
drm/vc4: Return -EINVAL on the overflow checks failing.
drm/vc4: Fix an integer overflow in temporary allocation layout.
drm/vc4: fix a bounds check
drm/vc4: Fix memory leak of the CRTC state.
Just a few small fixes.
* 'drm-fixes-4.10' of git://people.freedesktop.org/~agd5f/linux:
Revert "drm/radeon: always apply pci shutdown callbacks"
drm/amdgpu: fix unload driver issue for virtual display
drm/amdgpu: check ring being ready before using
Single fence fix.
* tag 'drm-misc-fixes-2017-01-23' of git://anongit.freedesktop.org/git/drm-misc:
drm/fence: fix memory overwrite when setting out_fence fd
When you snapshot a subvolume containing a subvolume, you get a
placeholder directory where the subvolume would be. These directory
inodes have ->i_ops set to btrfs_dir_ro_inode_operations. Previously,
these i_ops didn't include the xattr operation callbacks. The conversion
to xattr_handlers missed this case, leading to bogus attempts to set
xattrs on these inodes. This manifested itself as failures when running
delayed inodes.
To fix this, clear IOP_XATTR in ->i_opflags on these inodes.
Fixes: 6c6ef9f26e ("xattr: Stop calling {get,set,remove}xattr inode operations")
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Reported-by: Chris Murphy <lists@colorremedies.com>
Tested-by: Chris Murphy <lists@colorremedies.com>
Cc: <stable@vger.kernel.org> # 4.9.x
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
As Jeff explained in c2951f32d3 ("btrfs: remove old tree_root dirent
processing in btrfs_real_readdir()"), supporting this old format is no
longer necessary since the Btrfs magic number has been updated since we
changed to the current format. There are other places where we still
handle this old format, but since this is part of a fix that is going to
stable, I'm only removing this one for now.
Cc: <stable@vger.kernel.org> # 4.9.x
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
