Commit Graph

982763 Commits

Author SHA1 Message Date
Artem Bityutskiy
9cf93f056f intel_idle: add SnowRidge C-state table
Add C-state table for the SnowRidge SoC which is found on Intel Jacobsville
platforms.

The following has been changed.

 1. C1E latency changed from 10us to 15us. It was measured using the
    open source "wult" tool (the "nic" method, 15us is the 99.99th
    percentile).

 2. C1E power break even changed from 20us to 25us, which may result
    in less C1E residency in some workloads.

 3. C6 latency changed from 50us to 130us. Measured the same way as C1E.

The C6 C-state is supported only by some SnowRidge revisions, so add a C-state
table commentary about this.

On SnowRidge, C6 support is enumerated via the usual mechanism: "mwait" leaf of
the "cpuid" instruction. The 'intel_idle' driver does check this leaf, so even
though C6 is present in the table, the driver will only use it if the CPU does
support it.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-30 18:25:34 +01:00
Rafael J. Wysocki
be1283454b cpufreq: intel_pstate: Fix fast-switch fallback path
When sugov_update_single_perf() falls back to the "frequency"
path due to the missing scale-invariance, it will call
cpufreq_driver_fast_switch() via sugov_fast_switch()
and the driver's ->fast_switch() callback will be invoked,
so it must not be NULL.

However, after commit a365ab6b9d ("cpufreq: intel_pstate: Implement
the ->adjust_perf() callback") intel_pstate sets ->fast_switch() to
NULL when it is going to use intel_cpufreq_adjust_perf(), which is a
mistake, because on x86 the scale-invariance may be turned off
dynamically, so modify it to retain the original ->adjust_perf()
callback pointer.

Fixes: a365ab6b9d ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback")
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Tested-by: Kenneth R. Crudup <kenny@panix.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-30 18:22:17 +01:00
Rafael J. Wysocki
977a3b0f6e Merge branch 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull operating performance points (OPP) framework fixes for 5.11-rc2
from Viresh Kumar:

"This contains two patches to fix freeing of resources in error paths."

* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  opp: Call the missing clk_put() on error
  opp: fix memory leak in _allocate_opp_table
2020-12-30 18:19:34 +01:00
Heiko Carstens
129975e75b s390/Kconfig: sort config S390 select list once again
...and add comments at the top and bottom.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-12-30 17:08:53 +01:00
Heiko Carstens
742eb4750f s390: update defconfigs
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-12-30 17:08:53 +01:00
Chris Wilson
cecb2af42c drm/i915/gt: Taint the reset mutex with the shrinker
Declare that, under extreme circumstances, the shrinker may need to wait
upon a request, in which case reset must not itself deadlock in order to
ensure forward progress of the driver. That is since the shrinker may
depend upon a reset, any reset cannot touch the shrinker.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201229141626.4773-1-chris@chris-wilson.co.uk
2020-12-30 13:36:54 +00:00
Linus Walleij
1f20bf5921 drm/panel: s6e63m0: Support max-brightness
The "max-brightness" is a standard backlight property that
we need to support for the Samsung GT-I8190 Golden because
the display will go black if we crank up the brightness
too high.

As the platform needs this ability to give picture this is
a regression fix along with the addition of the property
to the GT-I8190 device tree.

Cc: Stephan Gerhold <stephan@gerhold.net>
Fixes: 9c3f0a0dd6 ("drm/panel: s6e63m0: Implement 28 backlight levels")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201214222210.238081-1-linus.walleij@linaro.org
2020-12-30 11:26:08 +01:00
Tian Tao
ce90f685bd drm/tve200: remove unused including <linux/version.h>
Remove including <linux/version.h> that don't need it.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1609291023-46889-1-git-send-email-tiantao6@hisilicon.com
2020-12-30 11:25:05 +01:00
Andres Freund
dc30432605 block: add debugfs stanza for QUEUE_FLAG_NOWAIT
This was missed in 021a24460d. Leads to the numeric value of
QUEUE_FLAG_NOWAIT (i.e. 29) showing up in
/sys/kernel/debug/block/*/state.

Fixes: 021a24460d
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-29 16:47:46 -07:00
Randy Dunlap
875b2376fd fs: block_dev.c: fix kernel-doc warnings from struct block_device changes
Fix new kernel-doc warnings in fs/block_dev.c:

../fs/block_dev.c:1066: warning: Excess function parameter 'whole' description in 'bd_abort_claiming'
../fs/block_dev.c:1837: warning: Function parameter or member 'dev' not described in 'lookup_bdev'

Fixes: 4e7b5671c6 ("block: remove i_bdev")
Fixes: 37c3fc9abb ("block: simplify the block device claiming interface")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: linux-fsdevel@vger.kernel.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-29 16:47:18 -07:00
Linus Torvalds
139711f033 Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
 "16 patches

  Subsystems affected by this patch series: mm (selftests, hugetlb,
  pagecache, mremap, kasan, and slub), kbuild, checkpatch, misc, and
  lib"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: slub: call account_slab_page() after slab page initialization
  zlib: move EXPORT_SYMBOL() and MODULE_LICENSE() out of dfltcc_syms.c
  lib/zlib: fix inflating zlib streams on s390
  lib/genalloc: fix the overflow when size is too big
  kdev_t: always inline major/minor helper functions
  sizes.h: add SZ_8G/SZ_16G/SZ_32G macros
  local64.h: make <asm/local64.h> mandatory
  kasan: fix null pointer dereference in kasan_record_aux_stack
  mm: generalise COW SMC TLB flushing race comment
  mm/mremap.c: fix extent calculation
  mm: memmap defer init doesn't work as expected
  mm: add prototype for __add_to_page_cache_locked()
  checkpatch: prefer strscpy to strlcpy
  Revert "kbuild: avoid static_assert for genksyms"
  mm/hugetlb: fix deadlock in hugetlb_cow error path
  selftests/vm: fix building protection keys test
2020-12-29 15:45:49 -08:00
Roman Gushchin
1f3147b49d mm: slub: call account_slab_page() after slab page initialization
It's convenient to have page->objects initialized before calling into
account_slab_page().  In particular, this information can be used to
pre-alloc the obj_cgroup vector.

Let's call account_slab_page() a bit later, after the initialization of
page->objects.

This commit doesn't bring any functional change, but is required for
further optimizations.

[akpm@linux-foundation.org: undo changes needed by forthcoming mm-memcg-slab-pre-allocate-obj_cgroups-for-slab-caches-with-slab_account.patch]

Link: https://lkml.kernel.org/r/20201110195753.530157-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29 15:36:49 -08:00
Randy Dunlap
605cc30dea zlib: move EXPORT_SYMBOL() and MODULE_LICENSE() out of dfltcc_syms.c
In commit 11fb479ff5 ("zlib: export S390 symbols for zlib modules"), I
added EXPORT_SYMBOL()s to dfltcc_inflate.c but then Mikhail said that
these should probably be in dfltcc_syms.c with the other
EXPORT_SYMBOL()s.

However, that is contrary to the current kernel style, which places
EXPORT_SYMBOL() immediately after the function that it applies to, so
move all EXPORT_SYMBOL()s to their respective function locations and
drop the dfltcc_syms.c file.  Also move MODULE_LICENSE() from the
deleted file to dfltcc.c.

[rdunlap@infradead.org: remove dfltcc_syms.o from Makefile]
  Link: https://lkml.kernel.org/r/20201227171837.15492-1-rdunlap@infradead.org

Link: https://lkml.kernel.org/r/20201219052530.28461-1-rdunlap@infradead.org
Fixes: 11fb479ff5 ("zlib: export S390 symbols for zlib modules")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Zaslonko Mikhail <zaslonko@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29 15:36:49 -08:00
Ilya Leoshkevich
f0bb29e8c4 lib/zlib: fix inflating zlib streams on s390
Decompressing zlib streams on s390 fails with "incorrect data check"
error.

Userspace zlib checks inflate_state.flags in order to byteswap checksums
only for zlib streams, and s390 hardware inflate code, which was ported
from there, tries to match this behavior.  At the same time, kernel zlib
does not use inflate_state.flags, so it contains essentially random
values.  For many use cases either zlib stream is zeroed out or checksum
is not used, so this problem is masked, but at least SquashFS is still
affected.

Fix by always passing a checksum to and from the hardware as is, which
matches zlib_inflate()'s expectations.

Link: https://lkml.kernel.org/r/20201215155551.894884-1-iii@linux.ibm.com
Fixes: 1261961000 ("lib/zlib: add s390 hardware support for kernel zlib_inflate")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Cc: <stable@vger.kernel.org>	[5.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29 15:36:49 -08:00
Huang Shijie
3684566384 lib/genalloc: fix the overflow when size is too big
Some graphic card has very big memory on chip, such as 32G bytes.

In the following case, it will cause overflow:

    pool = gen_pool_create(PAGE_SHIFT, NUMA_NO_NODE);
    ret = gen_pool_add(pool, 0x1000000, SZ_32G, NUMA_NO_NODE);

    va = gen_pool_alloc(pool, SZ_4G);

The overflow occurs in gen_pool_alloc_algo_owner():

		....
		size = nbits << order;
		....

The @nbits is "int" type, so it will overflow.
Then the gen_pool_avail() will return the wrong value.

This patch converts some "int" to "unsigned long", and
changes the compare code in while.

Link: https://lkml.kernel.org/r/20201229060657.3389-1-sjhuang@iluvatar.ai
Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai>
Reported-by: Shi Jiasheng <jiasheng.shi@iluvatar.ai>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29 15:36:49 -08:00
Josh Poimboeuf
aa8c7db494 kdev_t: always inline major/minor helper functions
Silly GCC doesn't always inline these trivial functions.

Fixes the following warning:

  arch/x86/kernel/sys_ia32.o: warning: objtool: cp_stat64()+0xd8: call to new_encode_dev() with UACCESS enabled

Link: https://lkml.kernel.org/r/984353b44a4484d86ba9f73884b7306232e25e30.1608737428.git.jpoimboe@redhat.com
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>	[build-tested]
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29 15:36:49 -08:00
Huang Shijie
8b0fac44bd sizes.h: add SZ_8G/SZ_16G/SZ_32G macros
Add these macros, since we can use them in drivers.

Link: https://lkml.kernel.org/r/20201229072819.11183-1-sjhuang@iluvatar.ai
Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29 15:36:49 -08:00
Randy Dunlap
87dbc209ea local64.h: make <asm/local64.h> mandatory
Make <asm-generic/local64.h> mandatory in include/asm-generic/Kbuild and
remove all arch/*/include/asm/local64.h arch-specific files since they
only #include <asm-generic/local64.h>.

This fixes build errors on arch/c6x/ and arch/nios2/ for
block/blk-iocost.c.

Build-tested on 21 of 25 arch-es.  (tools problems on the others)

Yes, we could even rename <asm-generic/local64.h> to
<linux/local64.h> and change all #includes to use
<linux/local64.h> instead.

Link: https://lkml.kernel.org/r/20201227024446.17018-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29 15:36:49 -08:00
Walter Wu
13384f6125 kasan: fix null pointer dereference in kasan_record_aux_stack
Syzbot reported the following [1]:

  BUG: kernel NULL pointer dereference, address: 0000000000000008
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 2d993067 P4D 2d993067 PUD 19a3c067 PMD 0
  Oops: 0000 [#1] PREEMPT SMP KASAN
  CPU: 1 PID: 3852 Comm: kworker/1:2 Not tainted 5.10.0-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  Workqueue: events free_ipc
  RIP: 0010:kasan_record_aux_stack+0x77/0xb0

Add null checking slab object from kasan_get_alloc_meta() in order to
avoid null pointer dereference.

[1] https://syzkaller.appspot.com/x/log.txt?x=10a82a50d00000

Link: https://lkml.kernel.org/r/20201228080018.23041-1-walter-zh.wu@mediatek.com
Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29 15:36:49 -08:00
Nicholas Piggin
111fe7186b mm: generalise COW SMC TLB flushing race comment
I'm not sure if I'm completely missing something here, but AFAIKS the
reference to the mysterious "COW SMC race" confuses the issue.  The
original changelog and mailing list thread didn't help me either.

This SMC race is where the problem was detected, but isn't the general
problem bigger and more obvious: that the new PTE could be picked up at
any time by any TLB while entries for the old PTE exist in other TLBs
before the TLB flush takes effect?

The case where the iTLB and dTLB of a CPU are pointing at different pages
is an interesting one but follows from the general problem.

The other (minor) thing with the comment I think it makes it a bit clearer
to say what the old code was doing (i.e., it avoids the race as opposed to
what?).

References: 4ce072f1fa ("mm: fix a race condition under SMC + COW")
Link: https://lkml.kernel.org/r/20201215121119.351650-1-npiggin@gmail.com
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29 15:36:49 -08:00
Kalesh Singh
e05986ee7a mm/mremap.c: fix extent calculation
When `next < old_addr`, `next - old_addr` arithmetic underflows causing
`extent` to be incorrect.

Make `extent` the smaller of `next - old_addr` or `old_end - old_addr`.

Link: https://lkml.kernel.org/r/20201219170433.2418867-1-kaleshsingh@google.com
Fixes: c49dd34018 ("mm: speedup mremap on 1GB or larger regions")
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29 15:36:49 -08:00
Baoquan He
dc2da7b45f mm: memmap defer init doesn't work as expected
VMware observed a performance regression during memmap init on their
platform, and bisected to commit 73a6e474cb ("mm: memmap_init:
iterate over memblock regions rather that check each PFN") causing it.

Before the commit:

  [0.033176] Normal zone: 1445888 pages used for memmap
  [0.033176] Normal zone: 89391104 pages, LIFO batch:63
  [0.035851] ACPI: PM-Timer IO Port: 0x448

With commit

  [0.026874] Normal zone: 1445888 pages used for memmap
  [0.026875] Normal zone: 89391104 pages, LIFO batch:63
  [2.028450] ACPI: PM-Timer IO Port: 0x448

The root cause is the current memmap defer init doesn't work as expected.

Before, memmap_init_zone() was used to do memmap init of one whole zone,
to initialize all low zones of one numa node, but defer memmap init of
the last zone in that numa node.  However, since commit 73a6e474cb,
function memmap_init() is adapted to iterater over memblock regions
inside one zone, then call memmap_init_zone() to do memmap init for each
region.

E.g, on VMware's system, the memory layout is as below, there are two
memory regions in node 2.  The current code will mistakenly initialize the
whole 1st region [mem 0xab00000000-0xfcffffffff], then do memmap defer to
iniatialize only one memmory section on the 2nd region [mem
0x10000000000-0x1033fffffff].  In fact, we only expect to see that there's
only one memory section's memmap initialized.  That's why more time is
costed at the time.

[    0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[    0.008843] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x55ffffffff]
[    0.008844] ACPI: SRAT: Node 1 PXM 1 [mem 0x5600000000-0xaaffffffff]
[    0.008844] ACPI: SRAT: Node 2 PXM 2 [mem 0xab00000000-0xfcffffffff]
[    0.008845] ACPI: SRAT: Node 2 PXM 2 [mem 0x10000000000-0x1033fffffff]

Now, let's add a parameter 'zone_end_pfn' to memmap_init_zone() to pass
down the real zone end pfn so that defer_init() can use it to judge
whether defer need be taken in zone wide.

Link: https://lkml.kernel.org/r/20201223080811.16211-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20201223080811.16211-2-bhe@redhat.com
Fixes: commit 73a6e474cb ("mm: memmap_init: iterate over memblock regions rather that check each PFN")
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: Rahul Gopakumar <gopakumarr@vmware.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29 15:36:49 -08:00
Souptick Joarder
6d87d0ece5 mm: add prototype for __add_to_page_cache_locked()
Otherwise it causes a gcc warning:

  mm/filemap.c:830:14: warning: no previous prototype for `__add_to_page_cache_locked' [-Wmissing-prototypes]

A previous attempt to make this function static led to compilation
errors when CONFIG_DEBUG_INFO_BTF is enabled because
__add_to_page_cache_locked() is referred to by BPF code.

Adding a prototype will silence the warning.

Link: https://lkml.kernel.org/r/1608693702-4665-1-git-send-email-jrdr.linux@gmail.com
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29 15:36:49 -08:00
Joe Perches
5dbdb2d87c checkpatch: prefer strscpy to strlcpy
Prefer strscpy over the deprecated strlcpy function.

Link: https://lkml.kernel.org/r/19fe91084890e2c16fe56f960de6c570a93fa99b.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Requested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29 15:36:49 -08:00
Masahiro Yamada
3a176b9460 Revert "kbuild: avoid static_assert for genksyms"
This reverts commit 14dc3983b5.

Macro Elver had sent a fix proper fix earlier, and also pointed out
corner cases:
 "I guess what you propose is simpler, but might still have corner cases
  where we still get warnings. In particular, if some file (for whatever
  reason) does not include build_bug.h and uses a raw _Static_assert(),
  then we still get warnings. E.g. I see 1 user of raw _Static_assert()
  (drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h )."

I believe the raw use of _Static_assert() should be allowed, so this
should be fixed in genksyms.

Even after commit 14dc3983b5 ("kbuild: avoid static_assert for
genksyms"), I confirmed the following test code emits the warning.

  ---------------->8----------------
  #include <linux/export.h>

  _Static_assert((1 ?: 0), "");

  void foo(void) { }
  EXPORT_SYMBOL(foo);
  ---------------->8----------------

  WARNING: modpost: EXPORT symbol "foo" [vmlinux] version generation failed, symbol will not be versioned.

Now that commit 869b91992bce ("genksyms: Ignore module scoped
_Static_assert()") fixed this issue properly, the workaround should
be reverted.

Link: https://lkml.org/lkml/2020/12/10/845
Link: https://lkml.kernel.org/r/20201219183911.181442-1-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29 15:36:49 -08:00
Mike Kravetz
e7dd91c456 mm/hugetlb: fix deadlock in hugetlb_cow error path
syzbot reported the deadlock here [1].  The issue is in hugetlb cow
error handling when there are not enough huge pages for the faulting
task which took the original reservation.  It is possible that other
(child) tasks could have consumed pages associated with the reservation.
In this case, we want the task which took the original reservation to
succeed.  So, we unmap any associated pages in children so that they can
be used by the faulting task that owns the reservation.

The unmapping code needs to hold i_mmap_rwsem in write mode.  However,
due to commit c0d0381ade ("hugetlbfs: use i_mmap_rwsem for more pmd
sharing synchronization") we are already holding i_mmap_rwsem in read
mode when hugetlb_cow is called.

Technically, i_mmap_rwsem does not need to be held in read mode for COW
mappings as they can not share pmd's.  Modifying the fault code to not
take i_mmap_rwsem in read mode for COW (and other non-sharable) mappings
is too involved for a stable fix.

Instead, we simply drop the hugetlb_fault_mutex and i_mmap_rwsem before
unmapping.  This is OK as it is technically not needed.  They are
reacquired after unmapping as expected by calling code.  Since this is
done in an uncommon error path, the overhead of dropping and reacquiring
mutexes is acceptable.

While making changes, remove redundant BUG_ON after unmap_ref_private.

[1] https://lkml.kernel.org/r/000000000000b73ccc05b5cf8558@google.com

Link: https://lkml.kernel.org/r/4c5781b8-3b00-761e-c0c7-c5edebb6ec1a@oracle.com
Fixes: c0d0381ade ("hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: syzbot+5eee4145df3c15e96625@syzkaller.appspotmail.com
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29 15:36:49 -08:00
Harish
7cf22a1c88 selftests/vm: fix building protection keys test
Commit d8cbe8bfa7 ("tools/testing/selftests/vm: fix build error") tried
to include a ARCH check for powerpc, however ARCH is not defined in the
Makefile before including lib.mk.  This makes test building to skip on
both x86 and powerpc.

Fix the arch check by replacing it using machine type as it is already
defined and used in the test.

Link: https://lkml.kernel.org/r/20201215100402.257376-1-harish@linux.ibm.com
Fixes: d8cbe8bfa7 ("tools/testing/selftests/vm: fix build error")
Signed-off-by: Harish <harish@linux.ibm.com>
Reviewed-by: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29 15:36:49 -08:00
Chris Wilson
cc1557cadf drm/i915/gem: Peek at the inflight context
If supported by the backend, we can quickly look at the context's
inflight engine rather than search along the active list to confirm.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201229144114.31686-1-chris@chris-wilson.co.uk
2020-12-29 19:28:45 +00:00
Jens Axboe
77788775c7 io_uring: don't assume mm is constant across submits
If we COW the identity, we assume that ->mm never changes. But this
isn't true of multiple processes end up sharing the ring. Hence treat
id->mm like like any other process compontent when it comes to the
identity mapping. This is pretty trivial, just moving the existing grab
into io_grab_identity(), and including a check for the match.

Cc: stable@vger.kernel.org # 5.10
Fixes: 1e6fa5216a ("io_uring: COW io_identity on mismatch")
Reported-by: Christian Brauner <christian.brauner@ubuntu.com>:
Tested-by: Christian Brauner <christian.brauner@ubuntu.com>:
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-29 11:00:36 -07:00
Chris Wilson
70960ab275 drm/i915/gt: Define guc firmware blob for older Cometlakes
When splitting the Coffeelake define to also identify Cometlakes, I
missed the double fw_def for Coffeelake. That is only newer Cometlakes
use the cml specific guc firmware, older Cometlakes should use kbl
firmware.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2859
Fixes: 5f4ae2704d ("drm/i915: Identify Cometlake platform")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v5.9+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201229120828.29931-1-chris@chris-wilson.co.uk
2020-12-29 16:21:21 +00:00
Linus Torvalds
dea8dcf2a9 Merge tag 'for-5.11/dm-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fix from Mike Snitzer:
 "Revert WQ_SYSFS change that broke reencryption (and all other
  functionality that requires reloading a dm-crypt DM table)"

* tag 'for-5.11/dm-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  Revert "dm crypt: export sysfs of kcryptd workqueue"
2020-12-28 13:32:16 -08:00
Mike Snitzer
48b0777cd9 Revert "dm crypt: export sysfs of kcryptd workqueue"
This reverts commit a2b8b2d975.

WQ_SYSFS breaks the ability to reload a DM table due to sysfs kobject
collision (due to active and inactive table). Given lack of
demonstrated need for exposing this workqueue via sysfs: revert
exposing it.

Reported-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-12-28 16:13:52 -05:00
Ilya Dryomov
664f1e259a libceph: add __maybe_unused to DEFINE_MSGR2_FEATURE
Avoid -Wunused-const-variable warnings for "make W=1".

Reported-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-28 20:34:33 +01:00
Ilya Dryomov
f5f2c9a0e3 libceph: align session_key and con_secret to 16 bytes
crypto_shash_setkey() and crypto_aead_setkey() will do a (small)
GFP_ATOMIC allocation to align the key if it isn't suitably aligned.
It's not a big deal, but at the same time easy to avoid.

The actual alignment requirement is dynamic, queryable with
crypto_shash_alignmask() and crypto_aead_alignmask(), but shouldn't
be stricter than 16 bytes for our algorithms.

Fixes: cd1a677cad ("libceph, ceph: implement msgr2.1 protocol (crc and secure modes)")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-28 20:34:33 +01:00
Ilya Dryomov
ad32fe8801 libceph: fix auth_signature buffer allocation in secure mode
auth_signature frame is 68 bytes in plain mode and 96 bytes in
secure mode but we are requesting 68 bytes in both modes.  By luck,
this doesn't actually result in any invalid memory accesses because
the allocation is satisfied out of kmalloc-96 slab and so exactly
96 bytes are allocated, but KASAN rightfully complains.

Fixes: cd1a677cad ("libceph, ceph: implement msgr2.1 protocol (crc and secure modes)")
Reported-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-28 20:34:32 +01:00
Ilya Dryomov
60267ba35c ceph: reencode gid_list when reconnecting
On reconnect, cap and dentry releases are dropped and the fields
that follow must be reencoded into the freed space.  Currently these
are timestamp and gid_list, but gid_list isn't reencoded.  This
results in

  failed to decode message of type 24 v4: End of buffer

errors on the MDS.

While at it, make a change to encode gid_list unconditionally,
without regard to what head/which version was used as a result
of checking whether CEPH_FEATURE_FS_BTIME is supported or not.

URL: https://tracker.ceph.com/issues/48618
Fixes: 4f1ddb1ea8 ("ceph: implement updated ceph_mds_request_head structure")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
2020-12-28 20:34:32 +01:00
Linus Torvalds
c76e02c59e Merge branch 'for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue update from Tejun Heo:
 "The same as the cgroup tree - one commit which was scheduled for the
  5.11 merge window.

  All the commit does is avoding spurious worker wakeups from workqueue
  allocation / config change path to help cpuisol use cases"

* 'for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Kick a worker based on the actual activation of delayed works
2020-12-28 11:23:02 -08:00
Linus Torvalds
91afe604c1 Merge branch 'for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
 "These three patches were scheduled for the merge window but I forgot
  to send them out. Sorry about that.

  None of them are significant and they fit well in a fix pull request
  too - two are cosmetic and one fixes a memory leak in the mount option
  parsing path"

* 'for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: Fix memory leak when parsing multiple source parameters
  cgroup/cgroup.c: replace 'of->kn->priv' with of_cft()
  kernel: cgroup: Mundane spelling fixes throughout the file
2020-12-28 11:16:38 -08:00
Viresh Kumar
0e1d9ca176 opp: Call the missing clk_put() on error
Fix the clock reference counting by calling the missing clk_put() in the
error path.

Cc: v5.10 <stable@vger.kernel.org> # v5.10
Fixes: dd461cd918 ("opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-12-28 10:56:22 +05:30
Quanyang Wang
976509bb31 opp: fix memory leak in _allocate_opp_table
In function _allocate_opp_table, opp_dev is allocated and referenced
by opp_table via _add_opp_dev. But in the case that the subsequent calls
return -EPROBE_DEFER, it will jump to err label and opp_table will be
freed. Then opp_dev becomes an unreferenced object to cause memory leak.
So let's call _remove_opp_dev to do the cleanup.

This fixes the following kmemleak report:

unreferenced object 0xffff000801524a00 (size 128):
  comm "swapper/0", pid 1, jiffies 4294892465 (age 84.616s)
  hex dump (first 32 bytes):
    40 00 56 01 08 00 ff ff 40 00 56 01 08 00 ff ff  @.V.....@.V.....
    b8 52 77 7f 08 00 ff ff 00 3c 4c 00 08 00 ff ff  .Rw......<L.....
  backtrace:
    [<00000000b1289fb1>] kmemleak_alloc+0x30/0x40
    [<0000000056da48f0>] kmem_cache_alloc+0x3d4/0x588
    [<00000000a84b3b0e>] _add_opp_dev+0x2c/0x88
    [<0000000062a380cd>] _add_opp_table_indexed+0x124/0x268
    [<000000008b4c8f1f>] dev_pm_opp_of_add_table+0x20/0x1d8
    [<00000000e5316798>] dev_pm_opp_of_cpumask_add_table+0x48/0xf0
    [<00000000db0a8ec2>] dt_cpufreq_probe+0x20c/0x448
    [<0000000030a3a26c>] platform_probe+0x68/0xd8
    [<00000000c618e78d>] really_probe+0xd0/0x3a0
    [<00000000642e856f>] driver_probe_device+0x58/0xb8
    [<00000000f10f5307>] device_driver_attach+0x74/0x80
    [<0000000004f254b8>] __driver_attach+0x58/0xe0
    [<0000000009d5d19e>] bus_for_each_dev+0x70/0xc8
    [<0000000000d22e1c>] driver_attach+0x24/0x30
    [<0000000001d4e952>] bus_add_driver+0x14c/0x1f0
    [<0000000089928aaa>] driver_register+0x64/0x120

Cc: v5.10 <stable@vger.kernel.org> # v5.10
Fixes: dd461cd918 ("opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
[ Viresh: Added the stable tag ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-12-28 10:55:52 +05:30
Linus Torvalds
5c8fe583cc Linux 5.11-rc1 v5.11-rc1 2020-12-27 15:30:22 -08:00
Linus Torvalds
14e3e989f6 proc mountinfo: make splice available again
Since commit 36e2c7421f ("fs: don't allow splice read/write without
explicit ops") we've required that file operation structures explicitly
enable splice support, rather than falling back to the default handlers.

Most /proc files use the indirect 'struct proc_ops' to describe their
file operations, and were fixed up to support splice earlier in commits
40be821d627c..b24c30c67863, but the mountinfo files interact with the
VFS directly using their own 'struct file_operations' and got missed as
a result.

This adds the necessary support for splice to work for /proc/*/mountinfo
and friends.

Reported-by: Joan Bruguera Micó <joanbrugueram@gmail.com>
Reported-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209971
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-27 12:00:36 -08:00
Linus Torvalds
52cd5f9c22 Merge tag 'ntb-5.11' of git://github.com/jonmason/ntb
Pull NTB fixes from Jon Mason:
 "Bug fix for IDT NTB and Intel NTB LTR management support"

* tag 'ntb-5.11' of git://github.com/jonmason/ntb:
  ntb: intel: add Intel NTB LTR vendor support for gen4 NTB
  ntb: idt: fix error check in ntb_hw_idt.c
2020-12-27 09:22:55 -08:00
Linus Torvalds
33c148a4ae Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
 "Fix a number of autobuild failures due to missing Kconfig
  dependencies"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: qat - add CRYPTO_AES to Kconfig dependencies
  crypto: keembay - Add dependency on HAS_IOMEM
  crypto: keembay - CRYPTO_DEV_KEEMBAY_OCS_AES_SM4 should depend on ARCH_KEEMBAY
2020-12-27 09:14:32 -08:00
Linus Torvalds
cce622ab92 Merge tag 'objtool-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Ingo Molnar:
 "Fix a segfault that occurs when built with Clang"

* tag 'objtool-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Fix seg fault with Clang non-section symbols
2020-12-27 09:08:23 -08:00
Linus Torvalds
6be5f58215 Merge tag 'locking-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar:
 "Misc fixes/updates:

   - Fix static keys usage in module __init sections

   - Add separate MAINTAINERS entry for static branches/calls

   - Fix lockdep splat with CONFIG_PREEMPTIRQ_EVENTS=y tracing"

* tag 'locking-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  softirq: Avoid bad tracing / lockdep interaction
  jump_label/static_call: Add MAINTAINERS
  jump_label: Fix usage in module __init
2020-12-27 09:06:10 -08:00
Linus Torvalds
2eeefc60ad Merge tag 'timers-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
 "Update/fix two CPU sanity checks in the hotplug and the boot code, and
  fix a typo in the Kconfig help text.

  [ Context: the first two commits are the result of an ongoing
    annotation+review work of (intentional) tick_do_timer_cpu() data
    races reported by KCSAN, but the annotations aren't fully cooked
    yet ]"

* tag 'timers-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timekeeping: Fix spelling mistake in Kconfig "fullfill" -> "fulfill"
  tick/sched: Remove bogus boot "safety" check
  tick: Remove pointless cpu valid check in hotplug code
2020-12-27 09:03:41 -08:00
Linus Torvalds
3b80dee70e Merge tag 'sched-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
 "Fix a context switch performance regression"

* tag 'sched-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Optimize finish_lock_switch()
2020-12-27 09:00:47 -08:00
Linus Torvalds
f838f8d2b6 mfd: ab8500-debugfs: Remove extraneous seq_putc
Commit c9a3c4e637 ("mfd: ab8500-debugfs: Remove extraneous curly
brace") removed a left-over curly brace that caused build failures, but
Joe Perches points out that the subsequent 'seq_putc()' should also be
removed, because the commit that caused all these problems already added
the final '\n' to the seq_printf() above it.

Reported-by: Joe Perches <joe@perches.com>
Fixes: 886c812165 ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc")
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-26 09:19:49 -08:00
Linus Torvalds
40f78232f9 Merge tag 'pci-v5.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:

 - Fix a tegra enumeration regression (Rob Herring)

 - Fix a designware-host check that warned on *success*, not failure
   (Alexander Lobakin)

* tag 'pci-v5.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: dwc: Fix inverted condition of DMA mask setup warning
  PCI: tegra: Fix host link initialization
2020-12-25 20:17:40 -08:00