The ERR007885 will lead to a TDAR race condition for mutliQ when the
driver sets TDAR and the UDMA clears TDAR simultaneously or in a small
window (2-4 cycles). And it will cause the udma_tx and udma_tx_arbiter
state machines to hang. Therefore, the commit 53bb20d1fa ("net: fec:
add variable reg_desc_active to speed things up") and the commit
a179aad12b ("net: fec: ERR007885 Workaround for conventional TX") have
added the workaround to fix the potential issue for the conventional TX
path. Similarly, the XDP TX path should also have the potential hang
issue, so add the workaround for XDP TX path.
Fixes: 6d6b39f180 ("net: fec: add initial XDP support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20251128025915.2486943-1-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are two sets of macros used to define the status bits of TX and RX
BDs, one is the BD_SC_xx macros, the other one is the BD_ENET_xx macros.
For the BD_SC_xx macros, only BD_SC_WRAP is used in the driver. But the
BD_ENET_xx macros are more widely used in the driver, and they define
more bits of the BD status. Therefore, remove the BD_SC_xx macros from
now on.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251119025148.2817602-6-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The rx_align was introduced by the commit 41ef84ce4c ("net: fec: change
FEC alignment according to i.mx6 sx requirement"). Because the i.MX6 SX
requires RX buffer must be 64 bytes alignment.
Since the commit 95698ff617 ("net: fec: using page pool to manage RX
buffers"), the address of the RX buffer is always the page address plus
FEC_ENET_XDP_HEADROOM which is 256 bytes, so the RX buffer is always
64-byte aligned. Therefore, rx_align has no effect since that commit,
and we can safely remove it.
In addition, to prevent future modifications to FEC_ENET_XDP_HEADROOM,
a BUILD_BUG_ON() test has been added to the driver, which ensures that
FEC_ENET_XDP_HEADROOM provides the required alignment.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20251119025148.2817602-5-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The struct fec_enet_priv_txrx_info has three members: offset, page and
skb. The offset is only initialized in the driver and is not used, the
skb is never initialized and used in the driver. The both will not be
used in the future. Therefore, replace struct fec_enet_priv_txrx_info
directly with struct page.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251119025148.2817602-4-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
From the Kconfig file, we can see CONFIG_FEC depends on the following
platform-related options.
ColdFire: M523x, M527x, M5272, M528x, M520x and M532x
S32: ARCH_S32 (ARM64)
i.MX: SOC_IMX28 and ARCH_MXC (ARM and ARM64)
Based on the code of fec driver, only some macro definitions on the
M5272 platform are different from those on other platforms. Therefore,
we can simplify the following complex preprocessor directives to
"if !defined(CONFIG_M5272)".
"#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || \
defined(CONFIG_M528x) || defined(CONFIG_M520x) || \
defined(CONFIG_M532x) || defined(CONFIG_ARM) || \
defined(CONFIG_ARM64)"
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20251119025148.2817602-3-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The conditional preprocessor directive was added to fix build errors on
the MCF5272 platform, see commit d13919301d ("net: fec: Fix build for
MCF5272"). The compilation errors were originally caused by some register
macros not being defined on that platform.
The driver now uses quirks to dynamically handle platform differences,
and for MCF5272, its quirks is 0, so it does not support RACC and GBIT
Ethernet. So these preprocessor directives are no longer required and
can be safely removed without causing build or functional issue.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20251119025148.2817602-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.18-rc6).
No conflicts, adjacent changes in:
drivers/net/phy/micrel.c
96a9178a29 ("net: phy: micrel: lan8814 fix reset of the QSGMII interface")
61b7ade9ba ("net: phy: micrel: Add support for non PTP SKUs for lan8814")
and a trivial one in tools/testing/selftests/drivers/net/Makefile.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case of coldfire/5272 a fixed phy is used, which so far is created
by platform code, using fixed_phy_add(). This function has a number of
problems, therefore create a potentially needed fixed phy here, using
fixed_phy_register_100fd.
Note 1: This includes a small functional change, as coldfire/5272
created a fixed phy in half-duplex mode. Likely this was by mistake,
because the fec MAC is 100FD-capable, and connection is to a switch.
Note 2: Usage of phy_find_next() makes use of the fact that dev_id can
only be 0 or 1.
Due to lack of hardware, this is compile-tested only.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/adf4dc5c-5fa3-4ae6-a75c-a73954dede73@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Certain i.MX SoCs, such as i.MX8QM and i.MX8QXP, feature enhanced
FEC hardware that supports Ethernet Jumbo frames with packet sizes
up to 16K bytes.
When Jumbo frames are supported, the TX FIFO may not be large enough
to hold an entire frame. To handle this, the FIFO is configured to
operate in cut-through mode when the frame size exceeds
(PKT_MAXBUF_SIZE - ETH_HLEN - ETH_FCS_LEN), which allows transmission
to begin once the FIFO reaches a certain threshold.
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://patch.msgid.link/20250910185211.721341-7-shenwei.wang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new rx_frame_size member in the fec_enet_private structure to
track the RX buffer size. On the Jumbo frame enabled system, the value
will be recalculated whenever the MTU is updated, allowing the driver
to allocate RX buffer efficiently.
Configure the TRUNC_FL (Frame Truncation Length) based on the smaller
value between max_buf_size and the rx_frame_size to maintain consistent
RX error behavior, regardless of whether Jumbo frames are enabled.
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://patch.msgid.link/20250910185211.721341-5-shenwei.wang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor code to support Jumbo frame functionality by adding a member
variable in the fec_enet_private structure to store PKT_MAXBUF_SIZE.
Remove the OPT_FRAME_SIZE and define a new macro OPT_ARCH_HAS_MAX_FL to
indicate architectures that support configurable maximum frame length.
And update the MAX_FL register value to max_buf_size when
OPT_ARCH_HAS_MAX_FL is defined as 1.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://patch.msgid.link/20250910185211.721341-2-shenwei.wang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are also some RCR bits that are not defined but are used by the
driver, so add macro definitions for these bits to improve readability
and maintainability.
In addition, although FEC_RCR_HALFDPX has been defined, it is not used
in the driver. According to the description of FEC_RCR[1] in RM, it is
used to disable receive on transmit. Therefore, it is more appropriate
to redefine FEC_RCR[1] as FEC_RCR_DRT.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250711091639.1374411-3-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the current implementation, IP coalescing is always enabled and
cannot be disabled.
As setting maximum frames to 0 or 1, or setting delay to zero implies
immediate delivery of single packets/IRQs, disable coalescing in
hardware in these cases.
This also guarantees that coalescing is never enabled with ICFT or ICTT
set to zero, a configuration that could lead to unpredictable behaviour
according to i.MX8MP reference manual.
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250626-fec_deactivate_coalescing-v2-1-0b217f2e80da@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Activate TX hang workaround also in
fec_enet_txq_submit_skb() when TSO is not enabled.
Errata: ERR007885
Symptoms: NETDEV WATCHDOG: eth0 (fec): transmit queue 0 timed out
commit 37d6017b84 ("net: fec: Workaround for imx6sx enet tx hang when enable three queues")
There is a TDAR race condition for mutliQ when the software sets TDAR
and the UDMA clears TDAR simultaneously or in a small window (2-4 cycles).
This will cause the udma_tx and udma_tx_arbiter state machines to hang.
So, the Workaround is checking TDAR status four time, if TDAR cleared by
hardware and then write TDAR, otherwise don't set TDAR.
Fixes: 53bb20d1fa ("net: fec: add variable reg_desc_active to speed things up")
Signed-off-by: Mattias Barthel <mattias.barthel@atlascopco.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250429090826.3101258-1-mattiasbarthel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The core is reset both in `fec_restart()` (called on link-up) and
`fec_stop()` (going to sleep, driver remove etc.). These two functions
had their separate implementations, which was at first only a register
write and a `udelay()` (and the accompanying block comment). However,
since then we got soft-reset (MAC disable) and Wake-on-LAN support, which
meant that these implementations diverged, often causing bugs.
For instance, as of now, `fec_stop()` does not check for
`FEC_QUIRK_NO_HARD_RESET`, meaning the MII/RMII mode is cleared on eg.
a PM power-down event; and `fec_restart()` missed the refactor renaming
the "magic" constant `1` to `FEC_ECR_RESET`.
To harmonize current implementations, and eliminate this source of
potential future bugs, refactor implementation to a common function.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Link: https://patch.msgid.link/20250207121255.161146-2-csokas.bence@prolan.hu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The fec_enet_update_cbd function calls page_pool_dev_alloc_pages but did
not handle the case when it returned NULL. There was a WARN_ON(!new_page)
but it would still proceed to use the NULL pointer and then crash.
This case does seem somewhat rare but when the system is under memory
pressure it can happen. One case where I can duplicate this with some
frequency is when writing over a smbd share to a SATA HDD attached to an
imx6q.
Setting /proc/sys/vm/min_free_kbytes to higher values also seems to solve
the problem for my test case. But it still seems wrong that the fec driver
ignores the memory allocation error and can crash.
This commit handles the allocation error by dropping the current packet.
Fixes: 95698ff617 ("net: fec: using page pool to manage RX buffers")
Signed-off-by: Kevin Groeneveld <kgroeneveld@lenbrook.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250113154846.1765414-1-kgroeneveld@lenbrook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rather than maintaining a private copy of the LPI timer, make use of
the LPI timer maintained by phylib. In any case, phylib overwrites the
value of tx_lpi_timer set by the driver in phy_ethtool_get_eee().
Note that feb->eee.tx_lpi_timer is initialised to zero, which is just
the same with phylib's copy, so there should be no functional change.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/E1tKzVS-006c67-IJ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/net/ethernet to use
.remove(), with the eventual goal to drop struct
platform_driver::remove_new(). As .remove() and .remove_new() have the
same prototypes, conversion is done by just changing the structure
member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/18f7c585a1a8a8ac8b03a2fca7de19bd5c52ac2b.1727949050.git.u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace SET_RUNTIME_PM_OPS()/SET SYSTEM_SLEEP_PM_OPS() with their modern
RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() alternatives.
The combined usage of pm_ptr() and RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS()
allows the compiler to evaluate if the runtime suspend/resume() functions
are used at build time or are simply dead code.
This allows removing the __maybe_unused notation from the runtime
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20240806021628.2524089-1-festevam@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In prevision to add new UAPI for hwtstamp we will be limited to the struct
ethtool_ts_info that is currently passed in fixed binary format through the
ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code
already started operating on an extensible kernel variant of that
structure, similar in concept to struct kernel_hwtstamp_config vs struct
hwtstamp_config.
Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here
we introduce the kernel-only structure in include/linux/ethtool.h.
The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO.
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a deadlock issue found in sungem driver, please refer to the
commit ac0a230f71 ("eth: sungem: remove .ndo_poll_controller to avoid
deadlocks"). The root cause of the issue is that netpoll is in atomic
context and disable_irq() is called by .ndo_poll_controller interface
of sungem driver, however, disable_irq() might sleep. After analyzing
the implementation of fec_poll_controller(), the fec driver should have
the same issue. Due to the fec driver uses NAPI for TX completions, the
.ndo_poll_controller is unnecessary to be implemented in the fec driver,
so fec_poll_controller() can be safely removed.
Fixes: 7f5c6addcd ("net/fec: add poll controller function for fec nic")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://lore.kernel.org/r/20240511062009.652918-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Setting mac_managed_pm during interface up is too late.
In situations where the link is not brought up yet and the system suspends
the regular PHY power management will run. Since the FEC ETHEREN control
bit is cleared (automatically) on suspend the controller is off in resume.
When the regular PHY power management resume path runs in this context it
will write to the MII_DATA register but nothing will be transmitted on the
MDIO bus.
This can be observed by the following log:
fec 5b040000.ethernet eth0: MDIO read timeout
Microchip LAN87xx T1 5b040000.ethernet-1:04: PM: dpm_run_callback(): mdio_bus_phy_resume+0x0/0xc8 returns -110
Microchip LAN87xx T1 5b040000.ethernet-1:04: PM: failed to resume: error -110
The data written will however remain in the MII_DATA register.
When the link later is set to administrative up it will trigger a call to
fec_restart() which will restore the MII_SPEED register. This triggers the
quirk explained in f166f890c8 ("net: ethernet: fec: Replace interrupt
driven MDIO with polled IO") causing an extra MII_EVENT.
This extra event desynchronizes all the MDIO register reads, causing them
to complete too early. Leading all reads to read as 0 because
fec_enet_mdio_wait() returns too early.
When a Microchip LAN8700R PHY is connected to the FEC, the 0 reads causes
the PHY to be initialized incorrectly and the PHY will not transmit any
ethernet signal in this state. It cannot be brought out of this state
without a power cycle of the PHY.
Fixes: 557d5dc83f ("net: fec: use mac-managed PHY PM")
Closes: https://lore.kernel.org/netdev/1f45bdbe-eab1-4e59-8f24-add177590d27@actia.se/
Signed-off-by: Wei Fang <wei.fang@nxp.com>
[jernberg: commit message]
Signed-off-by: John Ernberg <john.ernberg@actia.se>
Link: https://lore.kernel.org/r/20240328155909.59613-2-john.ernberg@actia.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The enabling/disabling of EEE in the MAC should happen as a result of
auto negotiation. So move the enable/disable into
fec_enet_adjust_link() which gets called by phylib when there is a
change in link status.
fec_enet_set_eee() now just stores away the LPI timer value.
Everything else is passed to phylib, so it can correctly setup the
PHY.
fec_enet_get_eee() relies on phylib doing most of the work,
the MAC driver just adds the LPI timer value.
Call phy_support_eee() if the quirk is present to indicate the MAC
actually supports EEE.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> (On iMX8MP debix)
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://lore.kernel.org/r/20240302195306.3207716-8-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
