Despite being documented as self-clearing, the RANEG bit sometimes
remains set, preventing auto-negotiation from happening.
Manually clear the RANEG bit after 10ms as advised by MaxLinear.
In order to not hold RTNL during the 10ms of waiting schedule
delayed work to take care of clearing the bit asynchronously, which
is similar to the self-clearing behavior.
Fixes: 22335939ec ("net: dsa: add driver for MaxLinear GSW1xx switch family")
Reported-by: Rasmus Villemoes <ravi@prevas.dk>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/76745fceb5a3f53088110fb7a96acf88434088ca.1765241054.git.daniel@makrotopia.org
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The .shutdown operation should call dsa_switch_shutdown() just like
it is done also by the sibling lantiq_gswip driver. Not doing that
results in shutdown or reboot hanging and waiting for the CPU port
becoming free, which introduces a longer delay and a WARNING before
shutdown or reboot in case the driver is built-into the kernel.
Fix this by calling dsa_switch_shutdown() in the driver's shutdown
operation, harmonizing it with what is done in the lantiq_gswip
driver. As a side-effect this now allows to remove the previously
exported gswip_disable_switch() function which no longer got any
users.
Fixes: 22335939ec ("net: dsa: add driver for MaxLinear GSW1xx switch family")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/77ed91a5206e5dbf5d3e83d7e364ebfda90d31fd.1765241054.git.daniel@makrotopia.org
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The driver's .remove operation was calling gswip_disable_switch() which
clears the GSWIP_MDIO_GLOB_ENABLE bit before calling
dsa_unregister_switch() and thereby violating a Golden Rule of driver
development to always unpublish userspace interfaces before disabling
hardware, as pointed out by Russell King.
Fix this by relying in GSWIP_MDIO_GLOB_ENABLE being cleared by the
.teardown operation introduced by the previous commit
("net: dsa: lantiq_gswip: fix teardown order").
Fixes: 22335939ec ("net: dsa: add driver for MaxLinear GSW1xx switch family")
Suggested-by: "Russell King (Oracle)" <linux@armlinux.org.uk>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/63f882eeb910cf24503c35a443b541cc54a930f2.1765241054.git.daniel@makrotopia.org
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add driver for the MaxLinear GSW1xx family of Ethernet switch ICs which
are based on the same IP as the Lantiq/Intel GSWIP found in the Lantiq VR9
and Intel GRX MIPS router SoCs. The main difference is that instead of
using memory-mapped I/O to communicate with the host CPU these ICs are
connected via MDIO (or SPI, which isn't supported by this driver).
Implement the regmap API to access the switch registers over MDIO to allow
reusing lantiq_gswip_common for all core functionality.
The GSW1xx also comes with a SerDes port capable of 1000Base-X, SGMII and
2500Base-X, which can either be used to connect an external PHY or SFP
cage, or as the CPU port. Support for the SerDes interface is implemented
in this driver using the phylink_pcs interface.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://patch.msgid.link/b567ec1b4beb08fd37abf18b280c56d5d8253c26.1762170107.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
