The .shutdown operation should call dsa_switch_shutdown() just like
it is done also by the sibling lantiq_gswip driver. Not doing that
results in shutdown or reboot hanging and waiting for the CPU port
becoming free, which introduces a longer delay and a WARNING before
shutdown or reboot in case the driver is built-into the kernel.
Fix this by calling dsa_switch_shutdown() in the driver's shutdown
operation, harmonizing it with what is done in the lantiq_gswip
driver. As a side-effect this now allows to remove the previously
exported gswip_disable_switch() function which no longer got any
users.
Fixes: 22335939ec ("net: dsa: add driver for MaxLinear GSW1xx switch family")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/77ed91a5206e5dbf5d3e83d7e364ebfda90d31fd.1765241054.git.daniel@makrotopia.org
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Russell King pointed out that disabling the switch by clearing
GSWIP_MDIO_GLOB_ENABLE before calling dsa_unregister_switch() is
problematic, as it violates a Golden Rule of driver development to
always first unpublish userspace interfaces and then disable the
hardware.
Fix this, and also simplify the probe() function, by introducing a
dsa_switch_ops teardown() operation which takes care of clearing the
GSWIP_MDIO_GLOB_ENABLE bit.
Fixes: 14fceff477 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Suggested-by: "Russell King (Oracle)" <linux@armlinux.org.uk>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/4ebd72a29edc1e4059b9666a26a0bb5d906a829a.1765241054.git.daniel@makrotopia.org
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently the MII clk vs. data delay is configured based on the PHY
interface mode.
In addition to that add support for setting up MII delays using the
standard Device Tree properties 'tx-internal-delay-ps' and
'rx-internal-delay-ps', using the values determined by the PHY interface
mode as default to maintain backward compatibility with legacy device
trees.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/37203e831cff87dc46e5ef9e8cbd68fb8689773d.1762170107.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On standalone switch ICs the link parameters of the CPU port need to
be setup just like user ports. The destinction in the driver to not
carry out link parameter setup for the CPU port does make sense for
in-SoC switches on which the CPU port is internally connected to the
SoC's Ethernet MAC.
Set link parameters also for the CPU port unless it is an internal
interface. Note that the internal TP PHYs anyway cannot be used as
CPU ports, hence it doesn't matter that they are now also covered by
that condition.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/07c6b8d3a12296123be5e5938b454fc620f819e6.1762170107.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move all parts specific for the MMIO/SoC driver into a module of its own
to prepare for supporting MDIO-connected switch ICs.
Modify gswip_probe() functions by splitting it into a common function
gswip_probe_common() which covers allocating, initializing and registering
the DSA switch, while keeping transport-specific regmap initialization as
well as PHY firmware loading in the new MMIO/SoC-specific gswip_probe()
function.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/dc7da5b65ec220ba8e9bc4bd04fe1ed7de046656.1762170107.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
