Use a EFI configuration table to pass the initrd to the core kernel,
instead of per-arch methods. This cleans up the code considerably, and
should make it easier for architectures to get rid of their reliance on
DT for doing EFI boot in the future.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Mark them as unsigned so that we don't need extra casts, and define
them relative to cdword0 instead of requiring extra shifts.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
In the PCM core and driver code, there are lots place referring to the
current PCM state via runtime->status->state. This patch introduced a
local PCM state in runtime itself and replaces those references with
runtime->state. It has improvements in two aspects:
- The reduction of a indirect access leads to more code optimization
- It avoids a possible (unexpected) modification of the state via mmap
of the status record
The status->state is updated together with runtime->state, so that
user-space can still read the current state via mmap like before,
too.
This patch touches only the ALSA core code. The changes in each
driver will follow in later patches.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220926135558.26580-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Mark the trampoline as RO+X after arch_prepare_bpf_trampoline, so that
the trampoine follows W^X rule strictly. This will turn off warnings like
CPA refuse W^X violation: 8000000000000163 -> 0000000000000163 range: ...
Also remove bpf_jit_alloc_exec_page(), since it is not used any more.
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20220926184739.3512547-3-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allocate bpf_dispatcher with bpf_prog_pack_alloc so that bpf_dispatcher
can share pages with bpf programs.
arch_prepare_bpf_dispatcher() is updated to provide a RW buffer as working
area for arch code to write to.
This also fixes CPA W^X warnning like:
CPA refuse W^X violation: 8000000000000163 -> 0000000000000163 range: ...
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20220926184739.3512547-2-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Changing return value of kprobe's version of bpf_get_func_ip
to return zero if the attach address is not on the function's
entry point.
For kprobes attached in the middle of the function we can't easily
get to the function address especially now with the CONFIG_X86_KERNEL_IBT
support.
If user cares about current IP for kprobes attached within the
function body, they can get it with PT_REGS_IP(ctx).
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220926153340.1621984-6-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Patch series "ksm: count allocated rmap_items and update documentation",
v5.
KSM can save memory by merging identical pages, but also can consume
additional memory, because it needs to generate rmap_items to save each
scanned page's brief rmap information.
To determine how beneficial the ksm-policy (like madvise), they are using
brings, so we add a new interface /proc/<pid>/ksm_stat for each process
The value "ksm_rmap_items" in it indicates the total allocated ksm
rmap_items of this process.
The detailed description can be seen in the following patches' commit
message.
This patch (of 2):
KSM can save memory by merging identical pages, but also can consume
additional memory, because it needs to generate rmap_items to save each
scanned page's brief rmap information. Some of these pages may be merged,
but some may not be abled to be merged after being checked several times,
which are unprofitable memory consumed.
The information about whether KSM save memory or consume memory in
system-wide range can be determined by the comprehensive calculation of
pages_sharing, pages_shared, pages_unshared and pages_volatile. A simple
approximate calculation:
profit =~ pages_sharing * sizeof(page) - (all_rmap_items) *
sizeof(rmap_item);
where all_rmap_items equals to the sum of pages_sharing, pages_shared,
pages_unshared and pages_volatile.
But we cannot calculate this kind of ksm profit inner single-process wide
because the information of ksm rmap_item's number of a process is lacked.
For user applications, if this kind of information could be obtained, it
helps upper users know how beneficial the ksm-policy (like madvise) they
are using brings, and then optimize their app code. For example, one
application madvise 1000 pages as MERGEABLE, while only a few pages are
really merged, then it's not cost-efficient.
So we add a new interface /proc/<pid>/ksm_stat for each process in which
the value of ksm_rmap_itmes is only shown now and so more values can be
added in future.
So similarly, we can calculate the ksm profit approximately for a single
process by:
profit =~ ksm_merging_pages * sizeof(page) - ksm_rmap_items *
sizeof(rmap_item);
where ksm_merging_pages is shown at /proc/<pid>/ksm_merging_pages, and
ksm_rmap_items is shown in /proc/<pid>/ksm_stat.
Link: https://lkml.kernel.org/r/20220830143731.299702-1-xu.xin16@zte.com.cn
Link: https://lkml.kernel.org/r/20220830143838.299758-1-xu.xin16@zte.com.cn
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Reviewed-by: Xiaokai Ran <ran.xiaokai@zte.com.cn>
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Izik Eidus <izik.eidus@ravellosystems.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: minor cleanups around NUMA hinting".
Working on some GUP cleanups (e.g., getting rid of some FOLL_ flags) and
preparing for other GUP changes (getting rid of FOLL_FORCE|FOLL_WRITE for
for taking a R/O longterm pin), this is something I can easily send out
independently.
Get rid of FOLL_NUMA, allow FOLL_FORCE access to PROT_NONE mapped pages in
GUP-fast, and fixup some documentation around NUMA hinting.
This patch (of 3):
No need for a special flag that is not even properly documented to be
internal-only.
Let's just factor this check out and get rid of this flag. The separate
function has the nice benefit that we can centralize comments.
Link: https://lkml.kernel.org/r/20220825164659.89824-2-david@redhat.com
Link: https://lkml.kernel.org/r/20220825164659.89824-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The primary reason to invoke the oom reaper from the exit_mmap path used
to be a prevention of an excessive oom killing if the oom victim exit
races with the oom reaper (see [1] for more details). The invocation has
moved around since then because of the interaction with the munlock logic
but the underlying reason has remained the same (see [2]).
Munlock code is no longer a problem since [3] and there shouldn't be any
blocking operation before the memory is unmapped by exit_mmap so the oom
reaper invocation can be dropped. The unmapping part can be done with the
non-exclusive mmap_sem and the exclusive one is only required when page
tables are freed.
Remove the oom_reaper from exit_mmap which will make the code easier to
read. This is really unlikely to make any observable difference although
some microbenchmarks could benefit from one less branch that needs to be
evaluated even though it almost never is true.
[1] 2129258024 ("mm: oom: let oom_reap_task and exit_mmap run concurrently")
[2] 27ae357fa8 ("mm, oom: fix concurrent munlock and oom reaper unmap, v3")
[3] a213e5cf71 ("mm/munlock: delete munlock_vma_pages_all(), allow oomreap")
[akpm@linux-foundation.org: restore Suren's mmap_read_lock() optimization]
Link: https://lkml.kernel.org/r/20220531223100.510392-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christian Brauner (Microsoft) <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove __do_munmap() in favour of do_munmap(), do_mas_munmap(), and
do_mas_align_munmap().
do_munmap() is a wrapper to create a maple state for any callers that have
not been converted to the maple tree.
do_mas_munmap() takes a maple state to mumap a range. This is just a
small function which checks for error conditions and aligns the end of the
range.
do_mas_align_munmap() uses the aligned range to mumap a range.
do_mas_align_munmap() starts with the first VMA in the range, then finds
the last VMA in the range. Both start and end are split if necessary.
Then the VMAs are removed from the linked list and the mm mlock count is
updated at the same time. Followed by a single tree operation of
overwriting the area in with a NULL. Finally, the detached list is
unmapped and freed.
By reorganizing the munmap calls as outlined, it is now possible to avoid
extra work of aligning pre-aligned callers which are known to be safe,
avoid extra VMA lookups or tree walks for modifications.
detach_vmas_to_be_unmapped() is no longer used, so drop this code.
vm_brk_flags() can just call the do_mas_munmap() as it checks for
intersecting VMAs directly.
Link: https://lkml.kernel.org/r/20220906194824.2110408-29-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The maple tree was already tracking VMAs in this function by an earlier
commit, but the rbtree iterator was being used to iterate the list.
Change the iterator to use a maple tree native iterator and switch to the
maple tree advanced API to avoid multiple walks of the tree during insert
operations. Unexport the now-unused vma_store() function.
For performance reasons we bulk allocate the maple tree nodes. The node
calculations are done internally to the tree and use the VMA count and
assume the worst-case node requirements. The VM_DONT_COPY flag does not
allow for the most efficient copy method of the tree and so a bulk loading
algorithm is used.
Link: https://lkml.kernel.org/r/20220906194824.2110408-15-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Start tracking the VMAs with the new maple tree structure in parallel with
the rb_tree. Add debug and trace events for maple tree operations and
duplicate the rb_tree that is created on forks into the maple tree.
The maple tree is added to the mm_struct including the mm_init struct,
added support in required mm/mmap functions, added tracking in kernel/fork
for process forking, and used to find the unmapped_area and checked
against what the rbtree finds.
This also moves the mmap_lock() in exit_mmap() since the oom reaper call
does walk the VMAs. Otherwise lockdep will be unhappy if oom happens.
When splitting a vma fails due to allocations of the maple tree nodes,
the error path in __split_vma() calls new->vm_ops->close(new). The page
accounting for hugetlb is actually in the close() operation, so it
accounts for the removal of 1/2 of the VMA which was not adjusted. This
results in a negative exit value. To avoid the negative charge, set
vm_start = vm_end and vm_pgoff = 0.
There is also a potential accounting issue in special mappings from
insert_vm_struct() failing to allocate, so reverse the charge there in
the failure scenario.
Link: https://lkml.kernel.org/r/20220906194824.2110408-9-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Introducing the Maple Tree"
The maple tree is an RCU-safe range based B-tree designed to use modern
processor cache efficiently. There are a number of places in the kernel
that a non-overlapping range-based tree would be beneficial, especially
one with a simple interface. If you use an rbtree with other data
structures to improve performance or an interval tree to track
non-overlapping ranges, then this is for you.
The tree has a branching factor of 10 for non-leaf nodes and 16 for leaf
nodes. With the increased branching factor, it is significantly shorter
than the rbtree so it has fewer cache misses. The removal of the linked
list between subsequent entries also reduces the cache misses and the need
to pull in the previous and next VMA during many tree alterations.
The first user that is covered in this patch set is the vm_area_struct,
where three data structures are replaced by the maple tree: the augmented
rbtree, the vma cache, and the linked list of VMAs in the mm_struct. The
long term goal is to reduce or remove the mmap_lock contention.
The plan is to get to the point where we use the maple tree in RCU mode.
Readers will not block for writers. A single write operation will be
allowed at a time. A reader re-walks if stale data is encountered. VMAs
would be RCU enabled and this mode would be entered once multiple tasks
are using the mm_struct.
Davidlor said
: Yes I like the maple tree, and at this stage I don't think we can ask for
: more from this series wrt the MM - albeit there seems to still be some
: folks reporting breakage. Fundamentally I see Liam's work to (re)move
: complexity out of the MM (not to say that the actual maple tree is not
: complex) by consolidating the three complimentary data structures very
: much worth it considering performance does not take a hit. This was very
: much a turn off with the range locking approach, which worst case scenario
: incurred in prohibitive overhead. Also as Liam and Matthew have
: mentioned, RCU opens up a lot of nice performance opportunities, and in
: addition academia[1] has shown outstanding scalability of address spaces
: with the foundation of replacing the locked rbtree with RCU aware trees.
A similar work has been discovered in the academic press
https://pdos.csail.mit.edu/papers/rcuvm:asplos12.pdf
Sheer coincidence. We designed our tree with the intention of solving the
hardest problem first. Upon settling on a b-tree variant and a rough
outline, we researched ranged based b-trees and RCU b-trees and did find
that article. So it was nice to find reassurances that we were on the
right path, but our design choice of using ranges made that paper unusable
for us.
This patch (of 70):
The maple tree is an RCU-safe range based B-tree designed to use modern
processor cache efficiently. There are a number of places in the kernel
that a non-overlapping range-based tree would be beneficial, especially
one with a simple interface. If you use an rbtree with other data
structures to improve performance or an interval tree to track
non-overlapping ranges, then this is for you.
The tree has a branching factor of 10 for non-leaf nodes and 16 for leaf
nodes. With the increased branching factor, it is significantly shorter
than the rbtree so it has fewer cache misses. The removal of the linked
list between subsequent entries also reduces the cache misses and the need
to pull in the previous and next VMA during many tree alterations.
The first user that is covered in this patch set is the vm_area_struct,
where three data structures are replaced by the maple tree: the augmented
rbtree, the vma cache, and the linked list of VMAs in the mm_struct. The
long term goal is to reduce or remove the mmap_lock contention.
The plan is to get to the point where we use the maple tree in RCU mode.
Readers will not block for writers. A single write operation will be
allowed at a time. A reader re-walks if stale data is encountered. VMAs
would be RCU enabled and this mode would be entered once multiple tasks
are using the mm_struct.
There is additional BUG_ON() calls added within the tree, most of which
are in debug code. These will be replaced with a WARN_ON() call in the
future. There is also additional BUG_ON() calls within the code which
will also be reduced in number at a later date. These exist to catch
things such as out-of-range accesses which would crash anyways.
Link: https://lkml.kernel.org/r/20220906194824.2110408-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20220906194824.2110408-2-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: David Howells <dhowells@redhat.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/demotion: Memory tiers and demotion", v15.
The current kernel has the basic memory tiering support: Inactive pages on
a higher tier NUMA node can be migrated (demoted) to a lower tier NUMA
node to make room for new allocations on the higher tier NUMA node.
Frequently accessed pages on a lower tier NUMA node can be migrated
(promoted) to a higher tier NUMA node to improve the performance.
In the current kernel, memory tiers are defined implicitly via a demotion
path relationship between NUMA nodes, which is created during the kernel
initialization and updated when a NUMA node is hot-added or hot-removed.
The current implementation puts all nodes with CPU into the highest tier,
and builds the tier hierarchy tier-by-tier by establishing the per-node
demotion targets based on the distances between nodes.
This current memory tier kernel implementation needs to be improved for
several important use cases:
* The current tier initialization code always initializes each
memory-only NUMA node into a lower tier. But a memory-only NUMA node
may have a high performance memory device (e.g. a DRAM-backed
memory-only node on a virtual machine) and that should be put into a
higher tier.
* The current tier hierarchy always puts CPU nodes into the top tier.
But on a system with HBM (e.g. GPU memory) devices, these memory-only
HBM NUMA nodes should be in the top tier, and DRAM nodes with CPUs are
better to be placed into the next lower tier.
* Also because the current tier hierarchy always puts CPU nodes into the
top tier, when a CPU is hot-added (or hot-removed) and triggers a memory
node from CPU-less into a CPU node (or vice versa), the memory tier
hierarchy gets changed, even though no memory node is added or removed.
This can make the tier hierarchy unstable and make it difficult to
support tier-based memory accounting.
* A higher tier node can only be demoted to nodes with shortest distance
on the next lower tier as defined by the demotion path, not any other
node from any lower tier. This strict, demotion order does not work in
all use cases (e.g. some use cases may want to allow cross-socket
demotion to another node in the same demotion tier as a fallback when
the preferred demotion node is out of space), and has resulted in the
feature request for an interface to override the system-wide, per-node
demotion order from the userspace. This demotion order is also
inconsistent with the page allocation fallback order when all the nodes
in a higher tier are out of space: The page allocation can fall back to
any node from any lower tier, whereas the demotion order doesn't allow
that.
This patch series make the creation of memory tiers explicit under the
control of device driver.
Memory Tier Initialization
==========================
Linux kernel presents memory devices as NUMA nodes and each memory device
is of a specific type. The memory type of a device is represented by its
abstract distance. A memory tier corresponds to a range of abstract
distance. This allows for classifying memory devices with a specific
performance range into a memory tier.
By default, all memory nodes are assigned to the default tier with
abstract distance 512.
A device driver can move its memory nodes from the default tier. For
example, PMEM can move its memory nodes below the default tier, whereas
GPU can move its memory nodes above the default tier.
The kernel initialization code makes the decision on which exact tier a
memory node should be assigned to based on the requests from the device
drivers as well as the memory device hardware information provided by the
firmware.
Hot-adding/removing CPUs doesn't affect memory tier hierarchy.
This patch (of 10):
In the current kernel, memory tiers are defined implicitly via a demotion
path relationship between NUMA nodes, which is created during the kernel
initialization and updated when a NUMA node is hot-added or hot-removed.
The current implementation puts all nodes with CPU into the highest tier,
and builds the tier hierarchy by establishing the per-node demotion
targets based on the distances between nodes.
This current memory tier kernel implementation needs to be improved for
several important use cases,
The current tier initialization code always initializes each memory-only
NUMA node into a lower tier. But a memory-only NUMA node may have a high
performance memory device (e.g. a DRAM-backed memory-only node on a
virtual machine) that should be put into a higher tier.
The current tier hierarchy always puts CPU nodes into the top tier. But
on a system with HBM or GPU devices, the memory-only NUMA nodes mapping
these devices should be in the top tier, and DRAM nodes with CPUs are
better to be placed into the next lower tier.
With current kernel higher tier node can only be demoted to nodes with
shortest distance on the next lower tier as defined by the demotion path,
not any other node from any lower tier. This strict, demotion order does
not work in all use cases (e.g. some use cases may want to allow
cross-socket demotion to another node in the same demotion tier as a
fallback when the preferred demotion node is out of space), This demotion
order is also inconsistent with the page allocation fallback order when
all the nodes in a higher tier are out of space: The page allocation can
fall back to any node from any lower tier, whereas the demotion order
doesn't allow that.
This patch series address the above by defining memory tiers explicitly.
Linux kernel presents memory devices as NUMA nodes and each memory device
is of a specific type. The memory type of a device is represented by its
abstract distance. A memory tier corresponds to a range of abstract
distance. This allows for classifying memory devices with a specific
performance range into a memory tier.
This patch configures the range/chunk size to be 128. The default DRAM
abstract distance is 512. We can have 4 memory tiers below the default
DRAM with abstract distance range 0 - 127, 127 - 255, 256- 383, 384 - 511.
Faster memory devices can be placed in these faster(higher) memory tiers.
Slower memory devices like persistent memory will have abstract distance
higher than the default DRAM level.
[akpm@linux-foundation.org: fix comment, per Aneesh]
Link: https://lkml.kernel.org/r/20220818131042.113280-1-aneesh.kumar@linux.ibm.com
Link: https://lkml.kernel.org/r/20220818131042.113280-2-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Wei Xu <weixugc@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hesham Almatary <hesham.almatary@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Jagdish Gediya <jvgediya.oss@gmail.com>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
To further exploit spatial locality, the aging prefers to walk page tables
to search for young PTEs and promote hot pages. A kill switch will be
added in the next patch to disable this behavior. When disabled, the
aging relies on the rmap only.
NB: this behavior has nothing similar with the page table scanning in the
2.4 kernel [1], which searches page tables for old PTEs, adds cold pages
to swapcache and unmaps them.
To avoid confusion, the term "iteration" specifically means the traversal
of an entire mm_struct list; the term "walk" will be applied to page
tables and the rmap, as usual.
An mm_struct list is maintained for each memcg, and an mm_struct follows
its owner task to the new memcg when this task is migrated. Given an
lruvec, the aging iterates lruvec_memcg()->mm_list and calls
walk_page_range() with each mm_struct on this list to promote hot pages
before it increments max_seq.
When multiple page table walkers iterate the same list, each of them gets
a unique mm_struct; therefore they can run concurrently. Page table
walkers ignore any misplaced pages, e.g., if an mm_struct was migrated,
pages it left in the previous memcg will not be promoted when its current
memcg is under reclaim. Similarly, page table walkers will not promote
pages from nodes other than the one under reclaim.
This patch uses the following optimizations when walking page tables:
1. It tracks the usage of mm_struct's between context switches so that
page table walkers can skip processes that have been sleeping since
the last iteration.
2. It uses generational Bloom filters to record populated branches so
that page table walkers can reduce their search space based on the
query results, e.g., to skip page tables containing mostly holes or
misplaced pages.
3. It takes advantage of the accessed bit in non-leaf PMD entries when
CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG=y.
4. It does not zigzag between a PGD table and the same PMD table
spanning multiple VMAs. IOW, it finishes all the VMAs within the
range of the same PMD table before it returns to a PGD table. This
improves the cache performance for workloads that have large
numbers of tiny VMAs [2], especially when CONFIG_PGTABLE_LEVELS=5.
Server benchmark results:
Single workload:
fio (buffered I/O): no change
Single workload:
memcached (anon): +[8, 10]%
Ops/sec KB/sec
patch1-7: 1147696.57 44640.29
patch1-8: 1245274.91 48435.66
Configurations:
no change
Client benchmark results:
kswapd profiles:
patch1-7
48.16% lzo1x_1_do_compress (real work)
8.20% page_vma_mapped_walk (overhead)
7.06% _raw_spin_unlock_irq
2.92% ptep_clear_flush
2.53% __zram_bvec_write
2.11% do_raw_spin_lock
2.02% memmove
1.93% lru_gen_look_around
1.56% free_unref_page_list
1.40% memset
patch1-8
49.44% lzo1x_1_do_compress (real work)
6.19% page_vma_mapped_walk (overhead)
5.97% _raw_spin_unlock_irq
3.13% get_pfn_folio
2.85% ptep_clear_flush
2.42% __zram_bvec_write
2.08% do_raw_spin_lock
1.92% memmove
1.44% alloc_zspage
1.36% memset
Configurations:
no change
Thanks to the following developers for their efforts [3].
kernel test robot <lkp@intel.com>
[1] https://lwn.net/Articles/23732/
[2] https://llvm.org/docs/ScudoHardenedAllocator.html
[3] https://lore.kernel.org/r/202204160827.ekEARWQo-lkp@intel.com/
Link: https://lkml.kernel.org/r/20220918080010.2920238-9-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Searching the rmap for PTEs mapping each page on an LRU list (to test and
clear the accessed bit) can be expensive because pages from different VMAs
(PA space) are not cache friendly to the rmap (VA space). For workloads
mostly using mapped pages, searching the rmap can incur the highest CPU
cost in the reclaim path.
This patch exploits spatial locality to reduce the trips into the rmap.
When shrink_page_list() walks the rmap and finds a young PTE, a new
function lru_gen_look_around() scans at most BITS_PER_LONG-1 adjacent
PTEs. On finding another young PTE, it clears the accessed bit and
updates the gen counter of the page mapped by this PTE to
(max_seq%MAX_NR_GENS)+1.
Server benchmark results:
Single workload:
fio (buffered I/O): no change
Single workload:
memcached (anon): +[3, 5]%
Ops/sec KB/sec
patch1-6: 1106168.46 43025.04
patch1-7: 1147696.57 44640.29
Configurations:
no change
Client benchmark results:
kswapd profiles:
patch1-6
39.03% lzo1x_1_do_compress (real work)
18.47% page_vma_mapped_walk (overhead)
6.74% _raw_spin_unlock_irq
3.97% do_raw_spin_lock
2.49% ptep_clear_flush
2.48% anon_vma_interval_tree_iter_first
1.92% folio_referenced_one
1.88% __zram_bvec_write
1.48% memmove
1.31% vma_interval_tree_iter_next
patch1-7
48.16% lzo1x_1_do_compress (real work)
8.20% page_vma_mapped_walk (overhead)
7.06% _raw_spin_unlock_irq
2.92% ptep_clear_flush
2.53% __zram_bvec_write
2.11% do_raw_spin_lock
2.02% memmove
1.93% lru_gen_look_around
1.56% free_unref_page_list
1.40% memset
Configurations:
no change
Link: https://lkml.kernel.org/r/20220918080010.2920238-8-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Barry Song <baohua@kernel.org>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
To avoid confusion, the terms "promotion" and "demotion" will be applied
to the multi-gen LRU, as a new convention; the terms "activation" and
"deactivation" will be applied to the active/inactive LRU, as usual.
The aging produces young generations. Given an lruvec, it increments
max_seq when max_seq-min_seq+1 approaches MIN_NR_GENS. The aging promotes
hot pages to the youngest generation when it finds them accessed through
page tables; the demotion of cold pages happens consequently when it
increments max_seq. Promotion in the aging path does not involve any LRU
list operations, only the updates of the gen counter and
lrugen->nr_pages[]; demotion, unless as the result of the increment of
max_seq, requires LRU list operations, e.g., lru_deactivate_fn(). The
aging has the complexity O(nr_hot_pages), since it is only interested in
hot pages.
The eviction consumes old generations. Given an lruvec, it increments
min_seq when lrugen->lists[] indexed by min_seq%MAX_NR_GENS becomes empty.
A feedback loop modeled after the PID controller monitors refaults over
anon and file types and decides which type to evict when both types are
available from the same generation.
The protection of pages accessed multiple times through file descriptors
takes place in the eviction path. Each generation is divided into
multiple tiers. A page accessed N times through file descriptors is in
tier order_base_2(N). Tiers do not have dedicated lrugen->lists[], only
bits in folio->flags. The aforementioned feedback loop also monitors
refaults over all tiers and decides when to protect pages in which tiers
(N>1), using the first tier (N=0,1) as a baseline. The first tier
contains single-use unmapped clean pages, which are most likely the best
choices. In contrast to promotion in the aging path, the protection of a
page in the eviction path is achieved by moving this page to the next
generation, i.e., min_seq+1, if the feedback loop decides so. This
approach has the following advantages:
1. It removes the cost of activation in the buffered access path by
inferring whether pages accessed multiple times through file
descriptors are statistically hot and thus worth protecting in the
eviction path.
2. It takes pages accessed through page tables into account and avoids
overprotecting pages accessed multiple times through file
descriptors. (Pages accessed through page tables are in the first
tier, since N=0.)
3. More tiers provide better protection for pages accessed more than
twice through file descriptors, when under heavy buffered I/O
workloads.
Server benchmark results:
Single workload:
fio (buffered I/O): +[30, 32]%
IOPS BW
5.19-rc1: 2673k 10.2GiB/s
patch1-6: 3491k 13.3GiB/s
Single workload:
memcached (anon): -[4, 6]%
Ops/sec KB/sec
5.19-rc1: 1161501.04 45177.25
patch1-6: 1106168.46 43025.04
Configurations:
CPU: two Xeon 6154
Mem: total 256G
Node 1 was only used as a ram disk to reduce the variance in the
results.
patch drivers/block/brd.c <<EOF
99,100c99,100
< gfp_flags = GFP_NOIO | __GFP_ZERO | __GFP_HIGHMEM;
< page = alloc_page(gfp_flags);
---
> gfp_flags = GFP_NOIO | __GFP_ZERO | __GFP_HIGHMEM | __GFP_THISNODE;
> page = alloc_pages_node(1, gfp_flags, 0);
EOF
cat >>/etc/systemd/system.conf <<EOF
CPUAffinity=numa
NUMAPolicy=bind
NUMAMask=0
EOF
cat >>/etc/memcached.conf <<EOF
-m 184320
-s /var/run/memcached/memcached.sock
-a 0766
-t 36
-B binary
EOF
cat fio.sh
modprobe brd rd_nr=1 rd_size=113246208
swapoff -a
mkfs.ext4 /dev/ram0
mount -t ext4 /dev/ram0 /mnt
mkdir /sys/fs/cgroup/user.slice/test
echo 38654705664 >/sys/fs/cgroup/user.slice/test/memory.max
echo $$ >/sys/fs/cgroup/user.slice/test/cgroup.procs
fio -name=mglru --numjobs=72 --directory=/mnt --size=1408m \
--buffered=1 --ioengine=io_uring --iodepth=128 \
--iodepth_batch_submit=32 --iodepth_batch_complete=32 \
--rw=randread --random_distribution=random --norandommap \
--time_based --ramp_time=10m --runtime=5m --group_reporting
cat memcached.sh
modprobe brd rd_nr=1 rd_size=113246208
swapoff -a
mkswap /dev/ram0
swapon /dev/ram0
memtier_benchmark -S /var/run/memcached/memcached.sock \
-P memcache_binary -n allkeys --key-minimum=1 \
--key-maximum=65000000 --key-pattern=P:P -c 1 -t 36 \
--ratio 1:0 --pipeline 8 -d 2000
memtier_benchmark -S /var/run/memcached/memcached.sock \
-P memcache_binary -n allkeys --key-minimum=1 \
--key-maximum=65000000 --key-pattern=R:R -c 1 -t 36 \
--ratio 0:1 --pipeline 8 --randomize --distinct-client-seed
Client benchmark results:
kswapd profiles:
5.19-rc1
40.33% page_vma_mapped_walk (overhead)
21.80% lzo1x_1_do_compress (real work)
7.53% do_raw_spin_lock
3.95% _raw_spin_unlock_irq
2.52% vma_interval_tree_iter_next
2.37% folio_referenced_one
2.28% vma_interval_tree_subtree_search
1.97% anon_vma_interval_tree_iter_first
1.60% ptep_clear_flush
1.06% __zram_bvec_write
patch1-6
39.03% lzo1x_1_do_compress (real work)
18.47% page_vma_mapped_walk (overhead)
6.74% _raw_spin_unlock_irq
3.97% do_raw_spin_lock
2.49% ptep_clear_flush
2.48% anon_vma_interval_tree_iter_first
1.92% folio_referenced_one
1.88% __zram_bvec_write
1.48% memmove
1.31% vma_interval_tree_iter_next
Configurations:
CPU: single Snapdragon 7c
Mem: total 4G
ChromeOS MemoryPressure [1]
[1] https://chromium.googlesource.com/chromiumos/platform/tast-tests/
Link: https://lkml.kernel.org/r/20220918080010.2920238-7-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Evictable pages are divided into multiple generations for each lruvec.
The youngest generation number is stored in lrugen->max_seq for both
anon and file types as they are aged on an equal footing. The oldest
generation numbers are stored in lrugen->min_seq[] separately for anon
and file types as clean file pages can be evicted regardless of swap
constraints. These three variables are monotonically increasing.
Generation numbers are truncated into order_base_2(MAX_NR_GENS+1) bits
in order to fit into the gen counter in folio->flags. Each truncated
generation number is an index to lrugen->lists[]. The sliding window
technique is used to track at least MIN_NR_GENS and at most
MAX_NR_GENS generations. The gen counter stores a value within [1,
MAX_NR_GENS] while a page is on one of lrugen->lists[]. Otherwise it
stores 0.
There are two conceptually independent procedures: "the aging", which
produces young generations, and "the eviction", which consumes old
generations. They form a closed-loop system, i.e., "the page reclaim".
Both procedures can be invoked from userspace for the purposes of working
set estimation and proactive reclaim. These techniques are commonly used
to optimize job scheduling (bin packing) in data centers [1][2].
To avoid confusion, the terms "hot" and "cold" will be applied to the
multi-gen LRU, as a new convention; the terms "active" and "inactive" will
be applied to the active/inactive LRU, as usual.
The protection of hot pages and the selection of cold pages are based
on page access channels and patterns. There are two access channels:
one through page tables and the other through file descriptors. The
protection of the former channel is by design stronger because:
1. The uncertainty in determining the access patterns of the former
channel is higher due to the approximation of the accessed bit.
2. The cost of evicting the former channel is higher due to the TLB
flushes required and the likelihood of encountering the dirty bit.
3. The penalty of underprotecting the former channel is higher because
applications usually do not prepare themselves for major page
faults like they do for blocked I/O. E.g., GUI applications
commonly use dedicated I/O threads to avoid blocking rendering
threads.
There are also two access patterns: one with temporal locality and the
other without. For the reasons listed above, the former channel is
assumed to follow the former pattern unless VM_SEQ_READ or VM_RAND_READ is
present; the latter channel is assumed to follow the latter pattern unless
outlying refaults have been observed [3][4].
The next patch will address the "outlying refaults". Three macros, i.e.,
LRU_REFS_WIDTH, LRU_REFS_PGOFF and LRU_REFS_MASK, used later are added in
this patch to make the entire patchset less diffy.
A page is added to the youngest generation on faulting. The aging needs
to check the accessed bit at least twice before handing this page over to
the eviction. The first check takes care of the accessed bit set on the
initial fault; the second check makes sure this page has not been used
since then. This protocol, AKA second chance, requires a minimum of two
generations, hence MIN_NR_GENS.
[1] https://dl.acm.org/doi/10.1145/3297858.3304053
[2] https://dl.acm.org/doi/10.1145/3503222.3507731
[3] https://lwn.net/Articles/495543/
[4] https://lwn.net/Articles/815342/
Link: https://lkml.kernel.org/r/20220918080010.2920238-6-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
