The BTF (BPF Type Format) verifier needs to reuse the current
BPF verifier log. Hence, it requires the following changes:
(1) Expose log_write() in verifier.c for other users.
Its name is renamed to bpf_verifier_vlog().
(2) The BTF verifier also needs to check
'log->level && log->ubuf && !bpf_verifier_log_full(log);'
independently outside of the current log_write(). It is
because the BTF verifier will do one-check before
making multiple calls to btf_verifier_vlog to log
the details of a type.
Hence, this check is also re-factored to a new function
bpf_verifier_log_needed(). Since it is re-factored,
we can check it before va_start() in the current
bpf_verifier_log_write() and verbose().
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Earlier change missed the path where CONFIG_NET_DEVLINK is disabled.
Thanks to Jiri for spotting.
Fixes: 145307460b ("devlink: Remove top_hierarchy arg to devlink_resource_register")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fun set of conflict resolutions here...
For the mac80211 stuff, these were fortunately just parallel
adds. Trivially resolved.
In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the
function phy_disable_interrupts() earlier in the file, whilst in
'net-next' the phy_error() call from this function was removed.
In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the
'rt_table_id' member of rtable collided with a bug fix in 'net' that
added a new struct member "rt_mtu_locked" which needs to be copied
over here.
The mlxsw driver conflict consisted of net-next separating
the span code and definitions into separate files, whilst
a 'net' bug fix made some changes to that moved code.
The mlx5 infiniband conflict resolution was quite non-trivial,
the RDMA tree's merge commit was used as a guide here, and
here are their notes:
====================
Due to bug fixes found by the syzkaller bot and taken into the for-rc
branch after development for the 4.17 merge window had already started
being taken into the for-next branch, there were fairly non-trivial
merge issues that would need to be resolved between the for-rc branch
and the for-next branch. This merge resolves those conflicts and
provides a unified base upon which ongoing development for 4.17 can
be based.
Conflicts:
drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f95
(IB/mlx5: Fix cleanup order on unload) added to for-rc and
commit b5ca15ad7e (IB/mlx5: Add proper representors support)
add as part of the devel cycle both needed to modify the
init/de-init functions used by mlx5. To support the new
representors, the new functions added by the cleanup patch
needed to be made non-static, and the init/de-init list
added by the representors patch needed to be modified to
match the init/de-init list changes made by the cleanup
patch.
Updates:
drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function
prototypes added by representors patch to reflect new function
names as changed by cleanup patch
drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init
stage list to match new order from cleanup patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge misc fixes from Andrew Morton:
"13 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm, thp: do not cause memcg oom for thp
mm/vmscan: wake up flushers for legacy cgroups too
Revert "mm: page_alloc: skip over regions of invalid pfns where possible"
mm/shmem: do not wait for lock_page() in shmem_unused_huge_shrink()
mm/thp: do not wait for lock_page() in deferred_split_scan()
mm/khugepaged.c: convert VM_BUG_ON() to collapse fail
x86/mm: implement free pmd/pte page interfaces
mm/vmalloc: add interfaces to free unmapped page table
h8300: remove extraneous __BIG_ENDIAN definition
hugetlbfs: check for pgoff value overflow
lockdep: fix fs_reclaim warning
MAINTAINERS: update Mark Fasheh's e-mail
mm/mempolicy.c: avoid use uninitialized preferred_node
On architectures with CONFIG_HAVE_ARCH_HUGE_VMAP set, ioremap() may
create pud/pmd mappings. A kernel panic was observed on arm64 systems
with Cortex-A75 in the following steps as described by Hanjun Guo.
1. ioremap a 4K size, valid page table will build,
2. iounmap it, pte0 will set to 0;
3. ioremap the same address with 2M size, pgd/pmd is unchanged,
then set the a new value for pmd;
4. pte0 is leaked;
5. CPU may meet exception because the old pmd is still in TLB,
which will lead to kernel panic.
This panic is not reproducible on x86. INVLPG, called from iounmap,
purges all levels of entries associated with purged address on x86. x86
still has memory leak.
The patch changes the ioremap path to free unmapped page table(s) since
doing so in the unmap path has the following issues:
- The iounmap() path is shared with vunmap(). Since vmap() only
supports pte mappings, making vunmap() to free a pte page is an
overhead for regular vmap users as they do not need a pte page freed
up.
- Checking if all entries in a pte page are cleared in the unmap path
is racy, and serializing this check is expensive.
- The unmap path calls free_vmap_area_noflush() to do lazy TLB purges.
Clearing a pud/pmd entry before the lazy TLB purges needs extra TLB
purge.
Add two interfaces, pud_free_pmd_page() and pmd_free_pte_page(), which
clear a given pud/pmd entry and free up a page for the lower level
entries.
This patch implements their stub functions on x86 and arm64, which work
as workaround.
[akpm@linux-foundation.org: fix typo in pmd_free_pte_page() stub]
Link: http://lkml.kernel.org/r/20180314180155.19492-2-toshi.kani@hpe.com
Fixes: e61ce6ade4 ("mm: change ioremap to set up huge I/O mappings")
Reported-by: Lei Li <lious.lilei@hisilicon.com>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Wang Xuefeng <wxf.wang@hisilicon.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Chintan Pandya <cpandya@codeaurora.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking fixes from David Miller:
1) Always validate XFRM esn replay attribute, from Florian Westphal.
2) Fix RCU read lock imbalance in xfrm_get_tos(), from Xin Long.
3) Don't try to get firmware dump if not loaded in iwlwifi, from Shaul
Triebitz.
4) Fix BPF helpers to deal with SCTP GSO SKBs properly, from Daniel
Axtens.
5) Fix some interrupt handling issues in e1000e driver, from Benjamin
Poitier.
6) Use strlcpy() in several ethtool get_strings methods, from Florian
Fainelli.
7) Fix rhlist dup insertion, from Paul Blakey.
8) Fix SKB leak in netem packet scheduler, from Alexey Kodanev.
9) Fix driver unload crash when link is up in smsc911x, from Jeremy
Linton.
10) Purge out invalid socket types in l2tp_tunnel_create(), from Eric
Dumazet.
11) Need to purge the write queue when TCP connections are aborted,
otherwise userspace using MSG_ZEROCOPY can't close the fd. From
Soheil Hassas Yeganeh.
12) Fix double free in error path of team driver, from Arkadi
Sharshevsky.
13) Filter fixes for hv_netvsc driver, from Stephen Hemminger.
14) Fix non-linear packet access in ipv6 ndisc code, from Lorenzo
Bianconi.
15) Properly filter out unsupported feature flags in macvlan driver,
from Shannon Nelson.
16) Don't request loading the diag module for a protocol if the protocol
itself is not even registered. From Xin Long.
17) If datagram connect fails in ipv6, make sure the socket state is
consistent afterwards. From Paolo Abeni.
18) Use after free in qed driver, from Dan Carpenter.
19) If received ipv4 PMTU is less than the min pmtu, lock the mtu in the
entry. From Sabrina Dubroca.
20) Fix sleep in atomic in tg3 driver, from Jonathan Toppins.
21) Fix vlan in vlan untagging in some situations, from Toshiaki Makita.
22) Fix double SKB free in genlmsg_mcast(). From Nicolas Dichtel.
23) Fix NULL derefs in error paths of tcf_*_init(), from Davide Caratti.
24) Unbalanced PM runtime calls in FEC driver, from Florian Fainelli.
25) Memory leak in gemini driver, from Igor Pylypiv.
26) IDR leaks in error paths of tcf_*_init() functions, from Davide
Caratti.
27) Need to use GFP_ATOMIC in seg6_build_state(), from David Lebrun.
28) Missing dev_put() in error path of macsec_newlink(), from Dan
Carpenter.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (201 commits)
macsec: missing dev_put() on error in macsec_newlink()
net: dsa: Fix functional dsa-loop dependency on FIXED_PHY
hv_netvsc: common detach logic
hv_netvsc: change GPAD teardown order on older versions
hv_netvsc: use RCU to fix concurrent rx and queue changes
hv_netvsc: disable NAPI before channel close
net/ipv6: Handle onlink flag with multipath routes
ppp: avoid loop in xmit recursion detection code
ipv6: sr: fix NULL pointer dereference when setting encap source address
ipv6: sr: fix scheduling in RCU when creating seg6 lwtunnel state
net: aquantia: driver version bump
net: aquantia: Implement pci shutdown callback
net: aquantia: Allow live mac address changes
net: aquantia: Add tx clean budget and valid budget handling logic
net: aquantia: Change inefficient wait loop on fw data reads
net: aquantia: Fix a regression with reset on old firmware
net: aquantia: Fix hardware reset when SPI may rarely hangup
s390/qeth: on channel error, reject further cmd requests
s390/qeth: lock read device while queueing next buffer
s390/qeth: when thread completes, wake up all waiters
...
Pull MMC fixes from Ulf Hansson:
"A couple of MMC fixes intended for v4.16-rc7:
MMC host:
- dw_mmc: Fix the suspend/resume issue for Exynos5433
- dw_mmc: Fix the DTO/CTO timeout overflow calculation for 32-bit
systems
- dw_mmc: Make PIO mode work when failing with idmac when
dw_mci_reset occurs
- sdhci-acpi: Re-allow IRQ 0 to fix broken probe
MMC core:
- Update EXT_CSD caches to correctly switch partition for ioctl calls
- Fix tracepoint print of blk_addr and blksz
- Disable HPI on broken Micron (Numonyx) eMMC cards"
* tag 'mmc-v4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-acpi: Fix IRQ 0
mmc: dw_mmc: fix falling from idmac to PIO mode when dw_mci_reset occurs
mmc: core: Fix tracepoint print of blk_addr and blksz
mmc: core: Disable HPI for certain Micron (Numonyx) eMMC cards
mmc: dw_mmc: exynos: fix the suspend/resume issue for exynos5433
mmc: block: fix updating ext_csd caches on ioctl call
mmc: dw_mmc: Fix the DTO/CTO timeout overflow calculation for 32-bit systems
Since ra_chain is per-net, we may use per-net mutexes
to protect them in ip_ra_control(). This improves
scalability.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is optimization, which makes ip_call_ra_chain()
iterate less sockets to find the sockets it's looking for.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Define new netlink attributes for rmnet mux_id and flags. These
flags / mux_id were earlier using vlan flags / id respectively.
The flag bits are also moved to uapi and are renamed with
prefix RMNET_FLAG_*.
Also add the rmnet policy to handle the new netlink attributes.
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently when tipc is unable to queue a received message on a
socket, the message is rejected back to the sender with error
TIPC_ERR_OVERLOAD. However, the application on this socket
has no knowledge about these discards.
In this commit, we try to step the sk_drops counter when tipc
is unable to queue a received message. Export sk_drops
using tipc socket diagnostics.
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: GhantaKrishnamurthy MohanKrishna <mohan.krishna.ghanta.krishnamurthy@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit adds socket diagnostics capability for AF_TIPC in netlink
family NETLINK_SOCK_DIAG in a new kernel module (diag.ko).
The following are key design considerations:
- config TIPC_DIAG has default y, like INET_DIAG.
- only requests with flag NLM_F_DUMP is supported (dump all).
- tipc_sock_diag_req message is introduced to send filter parameters.
- the response attributes are of TLV, some nested.
To avoid exposing data structures between diag and tipc modules and
avoid code duplication, the following additions are required:
- export tipc_nl_sk_walk function to reuse socket iterator.
- export tipc_sk_fill_sock_diag to fill the tipc diag attributes.
- create a sock_diag response message in __tipc_add_sock_diag defined
in diag.c and use the above exported tipc_sk_fill_sock_diag
to fill response.
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: GhantaKrishnamurthy MohanKrishna <mohan.krishna.ghanta.krishnamurthy@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg says:
====================
Two more fixes (in three patches):
* ath9k_htc doesn't like QoS NDP frames, use regular ones
* hwsim: set up wmediumd for radios created later
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
top_hierarchy arg can be determined by comparing parent_resource_id to
DEVLINK_RESOURCE_ID_PARENT_TOP so it does not need to be a separate
argument.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For some phy devices, even though they don't support the MMD extended
register access, it does have some side effect if we are trying to
read/write the MMD registers via indirect method. So introduce general
dummy stubs for MMD register access which these devices can use to avoid
such side effect.
Fixes: b6b5e8a691 ("gianfar: Disable EEE autoneg by default")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simon Wunderlich says:
====================
This feature/cleanup patchset includes the following patches:
- avoid redundant multicast TT entries, by Linus Luessing
- add netlink support for distributed arp table cache and multicast flags,
by Linus Luessing (2 patches)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit adds struct uevent_sock to struct net. Since struct uevent_sock
records the position of the uevent socket in the uevent socket list we can
trivially remove it from the uevent socket list during cleanup. This speeds
up the old removal codepath.
Note, list_del() will hit __list_del_entry_valid() in its call chain which
will validate that the element is a member of the list. If it isn't it will
take care that the list is not modified.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-03-21
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add a BPF hook for sendmsg and sendfile by reusing the ULP infrastructure
and sockmap. Three helpers are added along with this, bpf_msg_apply_bytes(),
bpf_msg_cork_bytes(), and bpf_msg_pull_data(). The first is used to tell
for how many bytes the verdict should be applied to, the second to tell
that x bytes need to be queued first to retrigger the BPF program for a
verdict, and the third helper is mainly for the sendfile case to pull in
data for making it private for reading and/or writing, from John.
2) Improve address to symbol resolution of user stack traces in BPF stackmap.
Currently, the latter stores the address for each entry in the call trace,
however to map these addresses to user space files, it is necessary to
maintain the mapping from these virtual addresses to symbols in the binary
which is not practical for system-wide profiling. Instead, this option for
the stackmap rather stores the ELF build id and offset for the call trace
entries, from Song.
3) Add support that allows BPF programs attached to perf events to read the
address values recorded with the perf events. They are requested through
PERF_SAMPLE_ADDR via perf_event_open(). Main motivation behind it is to
support building memory or lock access profiling and tracing tools with
the help of BPF, from Teng.
4) Several improvements to the tools/bpf/ Makefiles. The 'make bpf' in the
tools directory does not provide the standard quiet output except for
bpftool and it also does not respect specifying a build output directory.
'make bpf_install' command neither respects specified destination nor
prefix, all from Jiri. In addition, Jakub fixes several other minor issues
in the Makefiles on top of that, e.g. fixing dependency paths, phony
targets and more.
5) Various doc updates e.g. add a comment for BPF fs about reserved names
to make the dentry lookup from there a bit more obvious, and a comment
to the bpf_devel_QA file in order to explain the diff between native
and bpf target clang usage with regards to pointer size, from Quentin
and Daniel.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 7b6ddeaf27 ("mac80211: use QoS NDP for AP probing") added an
argument qos_ok to ieee80211_nullfunc_get to support QoS NDP. Despite
the claim in the commit log "Change all the drivers to *not* allow
QoS NDP for now, even though it looks like most of them should be OK
with that", this commit enables QoS NDP in response to beacons (see
change to mlme.c:ieee80211_send_nullfunc), causing ath9k_htc to lose
IP connectivity. See:
https://patchwork.kernel.org/patch/10241109/https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=891060
Introduce a hardware flag to allow such buggy drivers to override the
correct default behaviour of mac80211 of sending QoS NDP packets.
Signed-off-by: Ben Caradoc-Davies <ben@transient.nz>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Pull rdma fixes from Jason Gunthorpe:
"Not much exciting here, almost entirely syzkaller fixes.
This is going to be on ongoing theme for some time, I think. Both
Google and Mellanox are now running syzkaller on different parts of
the user API.
Summary:
- Many bug fixes related to syzkaller from Leon Romanovsky. These are
still for the mlx driver and ucma interface.
- Fix a situation with port reuse for iWarp, discovered during
scale-up testing
- Bug fixes for the profile and restrack patches accepted during this
merge window
- Compile warning cleanups from Arnd, this is apparently the last
warning to make 32 bit builds quiet"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/ucma: Ensure that CM_ID exists prior to access it
RDMA/verbs: Remove restrack entry from XRCD structure
RDMA/ucma: Fix use-after-free access in ucma_close
RDMA/ucma: Check AF family prior resolving address
infiniband: bnxt_re: use BIT_ULL() for 64-bit bit masks
infiniband: qplib_fp: fix pointer cast
IB/mlx5: Fix cleanup order on unload
RDMA/ucma: Don't allow join attempts for unsupported AF family
RDMA/ucma: Fix access to non-initialized CM_ID object
RDMA/core: Do not use invalid destination in determining port reuse
RDMA/mlx5: Fix crash while accessing garbage pointer and freed memory
IB/mlx5: Fix integer overflows in mlx5_ib_create_srq
IB/mlx5: Fix out-of-bounds read in create_raw_packet_qp_rq
Pull workqueue fixes from Tejun Heo:
"Two low-impact workqueue commits.
One fixes workqueue creation error path and the other removes the
unused cancel_work()"
* 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: remove unused cancel_work()
workqueue: use put_device() instead of kfree()
Pull percpu fixes from Tejun Heo:
"Late percpu pull request for v4.16-rc6.
- percpu allocator pool replenishing no longer triggers OOM or
warning messages.
Also, the alloc interface now understands __GFP_NORETRY and
__GFP_NOWARN. This is to allow avoiding OOMs from userland
triggered actions like bpf map creation.
Also added cond_resched() in alloc loop.
- perpcu allocation now can be interrupted by kill sigs to avoid
deadlocking OOM killer.
- Added Dennis Zhou as a co-maintainer.
He has rewritten the area map allocator, understands most of the
code base and has been responsive for all bug reports"
* 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
percpu_ref: Update doc to dissuade users from depending on internal RCU grace periods
mm: Allow to kill tasks doing pcpu_alloc() and waiting for pcpu_balance_workfn()
percpu: include linux/sched.h for cond_resched()
percpu: add a schedule point in pcpu_balance_workfn()
percpu: allow select gfp to be passed to underlying allocators
percpu: add __GFP_NORETRY semantics to the percpu balancing path
percpu: match chunk allocator declarations with definitions
percpu: add Dennis Zhou as a percpu co-maintainer
Currently, if a bpf sk msg program is run the program
can only parse data that the (start,end) pointers already
consumed. For sendmsg hooks this is likely the first
scatterlist element. For sendpage this will be the range
(0,0) because the data is shared with userspace and by
default we want to avoid allowing userspace to modify
data while (or after) BPF verdict is being decided.
To support pulling in additional bytes for parsing use
a new helper bpf_sk_msg_pull(start, end, flags) which
works similar to cls tc logic. This helper will attempt
to point the data start pointer at 'start' bytes offest
into msg and data end pointer at 'end' bytes offset into
message.
After basic sanity checks to ensure 'start' <= 'end' and
'end' <= msg_length there are a few cases we need to
handle.
First the sendmsg hook has already copied the data from
userspace and has exclusive access to it. Therefor, it
is not necessesary to copy the data. However, it may
be required. After finding the scatterlist element with
'start' offset byte in it there are two cases. One the
range (start,end) is entirely contained in the sg element
and is already linear. All that is needed is to update the
data pointers, no allocate/copy is needed. The other case
is (start, end) crosses sg element boundaries. In this
case we allocate a block of size 'end - start' and copy
the data to linearize it.
Next sendpage hook has not copied any data in initial
state so that data pointers are (0,0). In this case we
handle it similar to the above sendmsg case except the
allocation/copy must always happen. Then when sending
the data we have possibly three memory regions that
need to be sent, (0, start - 1), (start, end), and
(end + 1, msg_length). This is required to ensure any
writes by the BPF program are correctly transmitted.
Lastly this operation will invalidate any previous
data checks so BPF programs will have to revalidate
pointers after making this BPF call.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
In the case where we need a specific number of bytes before a
verdict can be assigned, even if the data spans multiple sendmsg
or sendfile calls. The BPF program may use msg_cork_bytes().
The extreme case is a user can call sendmsg repeatedly with
1-byte msg segments. Obviously, this is bad for performance but
is still valid. If the BPF program needs N bytes to validate
a header it can use msg_cork_bytes to specify N bytes and the
BPF program will not be called again until N bytes have been
accumulated. The infrastructure will attempt to coalesce data
if possible so in many cases (most my use cases at least) the
data will be in a single scatterlist element with data pointers
pointing to start/end of the element. However, this is dependent
on available memory so is not guaranteed. So BPF programs must
validate data pointer ranges, but this is the case anyways to
convince the verifier the accesses are valid.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
A single sendmsg or sendfile system call can contain multiple logical
messages that a BPF program may want to read and apply a verdict. But,
without an apply_bytes helper any verdict on the data applies to all
bytes in the sendmsg/sendfile. Alternatively, a BPF program may only
care to read the first N bytes of a msg. If the payload is large say
MB or even GB setting up and calling the BPF program repeatedly for
all bytes, even though the verdict is already known, creates
unnecessary overhead.
To allow BPF programs to control how many bytes a given verdict
applies to we implement a bpf_msg_apply_bytes() helper. When called
from within a BPF program this sets a counter, internal to the
BPF infrastructure, that applies the last verdict to the next N
bytes. If the N is smaller than the current data being processed
from a sendmsg/sendfile call, the first N bytes will be sent and
the BPF program will be re-run with start_data pointing to the N+1
byte. If N is larger than the current data being processed the
BPF verdict will be applied to multiple sendmsg/sendfile calls
until N bytes are consumed.
Note1 if a socket closes with apply_bytes counter non-zero this
is not a problem because data is not being buffered for N bytes
and is sent as its received.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This implements a BPF ULP layer to allow policy enforcement and
monitoring at the socket layer. In order to support this a new
program type BPF_PROG_TYPE_SK_MSG is used to run the policy at
the sendmsg/sendpage hook. To attach the policy to sockets a
sockmap is used with a new program attach type BPF_SK_MSG_VERDICT.
Similar to previous sockmap usages when a sock is added to a
sockmap, via a map update, if the map contains a BPF_SK_MSG_VERDICT
program type attached then the BPF ULP layer is created on the
socket and the attached BPF_PROG_TYPE_SK_MSG program is run for
every msg in sendmsg case and page/offset in sendpage case.
BPF_PROG_TYPE_SK_MSG Semantics/API:
BPF_PROG_TYPE_SK_MSG supports only two return codes SK_PASS and
SK_DROP. Returning SK_DROP free's the copied data in the sendmsg
case and in the sendpage case leaves the data untouched. Both cases
return -EACESS to the user. Returning SK_PASS will allow the msg to
be sent.
In the sendmsg case data is copied into kernel space buffers before
running the BPF program. The kernel space buffers are stored in a
scatterlist object where each element is a kernel memory buffer.
Some effort is made to coalesce data from the sendmsg call here.
For example a sendmsg call with many one byte iov entries will
likely be pushed into a single entry. The BPF program is run with
data pointers (start/end) pointing to the first sg element.
In the sendpage case data is not copied. We opt not to copy the
data by default here, because the BPF infrastructure does not
know what bytes will be needed nor when they will be needed. So
copying all bytes may be wasteful. Because of this the initial
start/end data pointers are (0,0). Meaning no data can be read or
written. This avoids reading data that may be modified by the
user. A new helper is added later in this series if reading and
writing the data is needed. The helper call will do a copy by
default so that the page is exclusively owned by the BPF call.
The verdict from the BPF_PROG_TYPE_SK_MSG applies to the entire msg
in the sendmsg() case and the entire page/offset in the sendpage case.
This avoids ambiguity on how to handle mixed return codes in the
sendmsg case. Again a helper is added later in the series if
a verdict needs to apply to multiple system calls and/or only
a subpart of the currently being processed message.
The helper msg_redirect_map() can be used to select the socket to
send the data on. This is used similar to existing redirect use
cases. This allows policy to redirect msgs.
Pseudo code simple example:
The basic logic to attach a program to a socket is as follows,
// load the programs
bpf_prog_load(SOCKMAP_TCP_MSG_PROG, BPF_PROG_TYPE_SK_MSG,
&obj, &msg_prog);
// lookup the sockmap
bpf_map_msg = bpf_object__find_map_by_name(obj, "my_sock_map");
// get fd for sockmap
map_fd_msg = bpf_map__fd(bpf_map_msg);
// attach program to sockmap
bpf_prog_attach(msg_prog, map_fd_msg, BPF_SK_MSG_VERDICT, 0);
Adding sockets to the map is done in the normal way,
// Add a socket 'fd' to sockmap at location 'i'
bpf_map_update_elem(map_fd_msg, &i, fd, BPF_ANY);
After the above any socket attached to "my_sock_map", in this case
'fd', will run the BPF msg verdict program (msg_prog) on every
sendmsg and sendpage system call.
For a complete example see BPF selftests or sockmap samples.
Implementation notes:
It seemed the simplest, to me at least, to use a refcnt to ensure
psock is not lost across the sendmsg copy into the sg, the bpf program
running on the data in sg_data, and the final pass to the TCP stack.
Some performance testing may show a better method to do this and avoid
the refcnt cost, but for now use the simpler method.
Another item that will come after basic support is in place is
supporting MSG_MORE flag. At the moment we call sendpages even if
the MSG_MORE flag is set. An enhancement would be to collect the
pages into a larger scatterlist and pass down the stack. Notice that
bpf_tcp_sendmsg() could support this with some additional state saved
across sendmsg calls. I built the code to support this without having
to do refactoring work. Other features TBD include ZEROCOPY and the
TCP_RECV_QUEUE/TCP_NO_QUEUE support. This will follow initial series
shortly.
Future work could improve size limits on the scatterlist rings used
here. Currently, we use MAX_SKB_FRAGS simply because this was being
used already in the TLS case. Future work could extend the kernel sk
APIs to tune this depending on workload. This is a trade-off
between memory usage and throughput performance.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The current implementation of sk_alloc_sg expects scatterlist to always
start at entry 0 and complete at entry MAX_SKB_FRAGS.
Future patches will want to support starting at arbitrary offset into
scatterlist so add an additional sg_start parameters and then default
to the current values in TLS code paths.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When calling do_tcp_sendpages() from in kernel and we know the data
has no references from user side we can omit SKBTX_SHARED_FRAG flag.
This patch adds an internal flag, NO_SKBTX_SHARED_FRAG that can be used
to omit setting SKBTX_SHARED_FRAG.
The flag is not exposed to userspace because the sendpage call from
the splice logic masks out all bits except MSG_MORE.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The TLS ULP module builds scatterlists from a sock using
page_frag_refill(). This is going to be useful for other ULPs
so move it into sock file for more general use.
In the process remove useless goto at end of while loop.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
XRCD object is not implemented in the restrack, so lets remove it.
Fixes: 02d8883f52 ("RDMA/restrack: Add general infrastructure to track RDMA resources")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
percpu_ref internally uses sched-RCU to implement the percpu -> atomic
mode switching and the documentation suggested that this could be
depended upon. This doesn't seem like a good idea.
* percpu_ref uses sched-RCU which has different grace periods regular
RCU. Users may combine percpu_ref with regular RCU usage and
incorrectly believe that regular RCU grace periods are performed by
percpu_ref. This can lead to, for example, use-after-free due to
premature freeing.
* percpu_ref has a grace period when switching from percpu to atomic
mode. It doesn't have one between the last put and release. This
distinction is subtle and can lead to surprising bugs.
* percpu_ref allows starting in and switching to atomic mode manually
for debugging and other purposes. This means that there may not be
any grace periods from kill to release.
This patch makes it clear that the grace periods are percpu_ref's
internal implementation detail and can't be depended upon by the
users.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull KVM fixes from Paolo Bonzini:
"PPC:
- fix bug leading to lost IPIs and smp_call_function_many() lockups
on POWER9
ARM:
- locking fix
- reset fix
- GICv2 multi-source SGI injection fix
- GICv2-on-v3 MMIO synchronization fix
- make the console less verbose.
x86:
- fix device passthrough on AMD SME"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Fix device passthrough when SME is active
kvm: arm/arm64: vgic-v3: Tighten synchronization for guests using v2 on v3
KVM: arm/arm64: vgic: Don't populate multiple LRs with the same vintid
KVM: arm/arm64: Reduce verbosity of KVM init log
KVM: arm/arm64: Reset mapped IRQs on VM reset
KVM: arm/arm64: Avoid vcpu_load for other vcpu ioctls than KVM_RUN
KVM: arm/arm64: vgic: Add missing irq_lock to vgic_mmio_read_pending
KVM: PPC: Book3S HV: Fix trap number return from __kvmppc_vcore_entry
use proc_remove_subtree() for subtree removal, both on setup failure
halfway through and on teardown. No need to make simple things
complex...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Publications for TIPC_CLUSTER_SCOPE and TIPC_ZONE_SCOPE are in all
aspects handled the same way, both on the publishing node and on the
receiving nodes.
Despite previous ambitions to the contrary, this is never going to change,
so we take the conseqeunce of this and obsolete TIPC_ZONE_SCOPE and related
macros/functions. Whenever a user is doing a bind() or a sendmsg() attempt
using ZONE_SCOPE we translate this internally to CLUSTER_SCOPE, while we
remain compatible with users and remote nodes still using ZONE_SCOPE.
Furthermore, the non-formalized scope value 0 has always been permitted
for use during lookup, with the same meaning as ZONE_SCOPE/CLUSTER_SCOPE.
We now permit it even as binding scope, but for compatibility reasons we
choose to not change the value of TIPC_CLUSTER_SCOPE.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rtnl_lock() is widely used mutex in kernel. Some of kernel code
does memory allocations under it. In case of memory deficit this
may invoke OOM killer, but the problem is a killed task can't
exit if it's waiting for the mutex. This may be a reason of deadlock
and panic.
This patch adds a new primitive, which responds on SIGKILL, and
it allows to use it in the places, where we don't want to sleep
forever.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch moves the udp_rmem_min, udp_wmem_min
to namespace and init the udp_l3mdev_accept explicitly.
The udp_rmem_min/udp_wmem_min affect udp rx/tx queue,
with this patch namespaces can set them differently.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ipv6_chk_addr_and_flags determines if an address is a local address and
optionally if it is an address on a specific device. For example, it is
called by ip6_route_info_create to determine if a given gateway address
is a local address. The address check currently does not consider L3
domains and as a result does not allow a route to be added in one VRF
if the nexthop points to an address in a second VRF. e.g.,
$ ip route add 2001:db8:1::/64 vrf r2 via 2001:db8:102::23
Error: Invalid gateway address.
where 2001:db8:102::23 is an address on an interface in vrf r1.
ipv6_chk_addr_and_flags needs to allow callers to always pass in a device
with a separate argument to not limit the address to the specific device.
The device is used used to determine the L3 domain of interest.
To that end add an argument to skip the device check and update callers
to always pass a device where possible and use the new argument to mean
any address in the domain.
Update a handful of users of ipv6_chk_addr with a NULL dev argument. This
patch handles the change to these callers without adding the domain check.
ip6_validate_gw needs to handle 2 cases - one where the device is given
as part of the nexthop spec and the other where the device is resolved.
There is at least 1 VRF case where deferring the check to only after
the route lookup has resolved the device fails with an unintuitive error
"RTNETLINK answers: No route to host" as opposed to the preferred
"Error: Gateway can not be a local address." The 'no route to host'
error is because of the fallback to a full lookup. The check is done
twice to avoid this error.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With reorder header off, received packets are untagged in skb_vlan_untag()
called from within __netif_receive_skb_core(), and later the tag will be
inserted back in vlan_do_receive().
This caused out of order vlan headers when we create a vlan device on top
of another vlan device, because vlan_do_receive() inserts a tag as the
outermost vlan tag. E.g. the outer tag is first removed in skb_vlan_untag()
and inserted back in vlan_do_receive(), then the inner tag is next removed
and inserted back as the outermost tag.
This patch fixes the behaviour by inserting the inner tag at the right
position.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we have a bridge with vlan_filtering on and a vlan device on top of
it, packets would be corrupted in skb_vlan_untag() called from
br_dev_xmit().
The problem sits in skb_reorder_vlan_header() used in skb_vlan_untag(),
which makes use of skb->mac_len. In this function mac_len is meant for
handling rx path with vlan devices with reorder_header disabled, but in
tx path mac_len is typically 0 and cannot be used, which is the problem
in this case.
The current code even does not properly handle rx path (skb_vlan_untag()
called from __netif_receive_skb_core()) with reorder_header off actually.
In rx path single tag case, it works as follows:
- Before skb_reorder_vlan_header()
mac_header data
v v
+-------------------+-------------+------+----
| ETH | VLAN | ETH |
| ADDRS | TPID | TCI | TYPE |
+-------------------+-------------+------+----
<-------- mac_len --------->
<------------->
to be removed
- After skb_reorder_vlan_header()
mac_header data
v v
+-------------------+------+----
| ETH | ETH |
| ADDRS | TYPE |
+-------------------+------+----
<-------- mac_len --------->
This is ok, but in rx double tag case, it corrupts packets:
- Before skb_reorder_vlan_header()
mac_header data
v v
+-------------------+-------------+-------------+------+----
| ETH | VLAN | VLAN | ETH |
| ADDRS | TPID | TCI | TPID | TCI | TYPE |
+-------------------+-------------+-------------+------+----
<--------------- mac_len ---------------->
<------------->
should be removed
<--------------------------->
actually will be removed
- After skb_reorder_vlan_header()
mac_header data
v v
+-------------------+------+----
| ETH | ETH |
| ADDRS | TYPE |
+-------------------+------+----
<--------------- mac_len ---------------->
So, two of vlan tags are both removed while only inner one should be
removed and mac_header (and mac_len) is broken.
skb_vlan_untag() is meant for removing the vlan header at (skb->data - 2),
so use skb->data and skb->mac_header to calculate the right offset.
Reported-by: Brandon Carpenter <brandon.carpenter@cypherpath.com>
Fixes: a6e18ff111 ("vlan: Fix untag operations of stacked vlans with REORDER_HEADER off")
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull vfs fixes from Al Viro:
- backport-friendly part of lock_parent() race fix
- a fix for an assumption in the heurisic used by path_connected() that
is not true on NFS
- livelock fixes for d_alloc_parallel()
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Teach path_connected to handle nfs filesystems with multiple roots.
fs: dcache: Use READ_ONCE when accessing i_dir_seq
fs: dcache: Avoid livelock between d_alloc_parallel and __d_add
lock_parent() needs to recheck if dentry got __dentry_kill'ed under it
On nfsv2 and nfsv3 the nfs server can export subsets of the same
filesystem and report the same filesystem identifier, so that the nfs
client can know they are the same filesystem. The subsets can be from
disjoint directory trees. The nfsv2 and nfsv3 filesystems provides no
way to find the common root of all directory trees exported form the
server with the same filesystem identifier.
The practical result is that in struct super s_root for nfs s_root is
not necessarily the root of the filesystem. The nfs mount code sets
s_root to the root of the first subset of the nfs filesystem that the
kernel mounts.
This effects the dcache invalidation code in generic_shutdown_super
currently called shrunk_dcache_for_umount and that code for years
has gone through an additional list of dentries that might be dentry
trees that need to be freed to accomodate nfs.
When I wrote path_connected I did not realize nfs was so special, and
it's hueristic for avoiding calling is_subdir can fail.
The practical case where this fails is when there is a move of a
directory from the subtree exposed by one nfs mount to the subtree
exposed by another nfs mount. This move can happen either locally or
remotely. With the remote case requiring that the move directory be cached
before the move and that after the move someone walks the path
to where the move directory now exists and in so doing causes the
already cached directory to be moved in the dcache through the magic
of d_splice_alias.
If someone whose working directory is in the move directory or a
subdirectory and now starts calling .. from the initial mount of nfs
(where s_root == mnt_root), then path_connected as a heuristic will
not bother with the is_subdir check. As s_root really is not the root
of the nfs filesystem this heuristic is wrong, and the path may
actually not be connected and path_connected can fail.
The is_subdir function might be cheap enough that we can call it
unconditionally. Verifying that will take some benchmarking and
the result may not be the same on all kernels this fix needs
to be backported to. So I am avoiding that for now.
Filesystems with snapshots such as nilfs and btrfs do something
similar. But as the directory tree of the snapshots are disjoint
from one another and from the main directory tree rename won't move
things between them and this problem will not occur.
Cc: stable@vger.kernel.org
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Fixes: 397d425dc2 ("vfs: Test for and handle paths that are unreachable from their mnt_root")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
kvm/arm fixes for 4.16, take 2
- Peace of mind locking fix in vgic_mmio_read_pending
- Allow hw-mapped interrupts to be reset when the VM resets
- Fix GICv2 multi-source SGI injection
- Fix MMIO synchronization for GICv2 on v3 emulation
- Remove excess verbosity on the console
Swap the positions of blk_addr and blksz in the tracepoint print arguments
so that they match the print format.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: d2f82254e4 ("mmc: core: Add members to mmc_request and mmc_data for CQE's")
Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Currently, bpf stackmap store address for each entry in the call trace.
To map these addresses to user space files, it is necessary to maintain
the mapping from these virtual address to symbols in the binary. Usually,
the user space profiler (such as perf) has to scan /proc/pid/maps at the
beginning of profiling, and monitor mmap2() calls afterwards. Given the
cost of maintaining the address map, this solution is not practical for
system wide profiling that is always on.
This patch tries to solve this problem with a variation of stackmap. This
variation is enabled by flag BPF_F_STACK_BUILD_ID. Instead of storing
addresses, the variation stores ELF file build_id + offset.
Build ID is a 20-byte unique identifier for ELF files. The following
command shows the Build ID of /bin/bash:
[user@]$ readelf -n /bin/bash
...
Build ID: XXXXXXXXXX
...
With BPF_F_STACK_BUILD_ID, bpf_get_stackid() tries to parse Build ID
for each entry in the call trace, and translate it into the following
struct:
struct bpf_stack_build_id_offset {
__s32 status;
unsigned char build_id[BPF_BUILD_ID_SIZE];
union {
__u64 offset;
__u64 ip;
};
};
The search of build_id is limited to the first page of the file, and this
page should be in page cache. Otherwise, we fallback to store ip for this
entry (ip field in struct bpf_stack_build_id_offset). This requires the
build_id to be stored in the first page. A quick survey of binary and
dynamic library files in a few different systems shows that almost all
binary and dynamic library files have build_id in the first page.
Build_id is only meaningful for user stack. If a kernel stack is added to
a stackmap with BPF_F_STACK_BUILD_ID, it will automatically fallback to
only store ip (status == BPF_STACK_BUILD_ID_IP). Similarly, if build_id
lookup failed for some reason, it will also fallback to store ip.
User space can access struct bpf_stack_build_id_offset with bpf
syscall BPF_MAP_LOOKUP_ELEM. It is necessary for user space to
maintain mapping from build id to binary files. This mostly static
mapping is much easier to maintain than per process address maps.
Note: Stackmap with build_id only works in non-nmi context at this time.
This is because we need to take mm->mmap_sem for find_vma(). If this
changes, we would like to allow build_id lookup in nmi context.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The vgic code is trying to be clever when injecting GICv2 SGIs,
and will happily populate LRs with the same interrupt number if
they come from multiple vcpus (after all, they are distinct
interrupt sources).
Unfortunately, this is against the letter of the architecture,
and the GICv2 architecture spec says "Each valid interrupt stored
in the List registers must have a unique VirtualID for that
virtual CPU interface.". GICv3 has similar (although slightly
ambiguous) restrictions.
This results in guests locking up when using GICv2-on-GICv3, for
example. The obvious fix is to stop trying so hard, and inject
a single vcpu per SGI per guest entry. After all, pending SGIs
with multiple source vcpus are pretty rare, and are mostly seen
in scenario where the physical CPUs are severely overcomitted.
But as we now only inject a single instance of a multi-source SGI per
vcpu entry, we may delay those interrupts for longer than strictly
necessary, and run the risk of injecting lower priority interrupts
in the meantime.
In order to address this, we adopt a three stage strategy:
- If we encounter a multi-source SGI in the AP list while computing
its depth, we force the list to be sorted
- When populating the LRs, we prevent the injection of any interrupt
of lower priority than that of the first multi-source SGI we've
injected.
- Finally, the injection of a multi-source SGI triggers the request
of a maintenance interrupt when there will be no pending interrupt
in the LRs (HCR_NPIE).
At the point where the last pending interrupt in the LRs switches
from Pending to Active, the maintenance interrupt will be delivered,
allowing us to add the remaining SGIs using the same process.
Cc: stable@vger.kernel.org
Fixes: 0919e84c0f ("KVM: arm/arm64: vgic-new: Add IRQ sync/flush framework")
Acked-by: Christoffer Dall <cdall@kernel.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
We currently don't allow resetting mapped IRQs from userspace, because
their state is controlled by the hardware. But we do need to reset the
state when the VM is reset, so we provide a function for the 'owner' of
the mapped interrupt to reset the interrupt state.
Currently only the timer uses mapped interrupts, so we call this
function from the timer reset logic.
Cc: stable@vger.kernel.org
Fixes: 4c60e360d6 ("KVM: arm/arm64: Provide a get_input_level for the arch timer")
Signed-off-by: Christoffer Dall <cdall@kernel.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
This patch is to add SCTP_AUTH_NO_AUTH type for AUTHENTICATION_EVENT,
as described in section 6.1.8 of RFC6458.
SCTP_AUTH_NO_AUTH: This report indicates that the peer does not
support SCTP authentication as defined in [RFC4895].
Note that the implementation is quite similar as that of
SCTP_ADAPTATION_INDICATION.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
