UAPI Changes:
Cross-subsystem Changes:
Core Changes:
Driver Changes:
- Add NULL check for media_gt in intel_hdcp_gsc_check_status (Gustavo)
- Fix EAGAIN sign in pf_migration_consume (Shuicheng)
- Fix MMIO access using PF view instead of VF view during migration (Shuicheng)
- Exclude indirect ring state page from ADS engine state size (Satya)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/afw5lsrjE4pStEml@gsse-cloud1.jf.intel.com
bochs_pci_probe() allocates the DRM device with devm_drm_dev_alloc(),
which registers a devres action to drop the initial DRM device reference
on driver detach or probe failure.
The error path currently calls drm_dev_put() manually. If probe then
returns an error, devres will run the registered release action and put
the same device again, after the first put may already have released it.
Return the probe error directly and let devres own the final put.
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Fixes: 04826f5886 ("drm/bochs: Allocate DRM device in struct bochs_device")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260424123506.32275-1-mhun512@gmail.com
pf_migration_mmio_save() and pf_migration_mmio_restore() initialize a
local VF-specific MMIO view via xe_mmio_init_vf_view() but then pass
>->mmio (the PF base) to all xe_mmio_read32()/xe_mmio_write32()
calls instead of the local &mmio. This causes the PF own SW flag
registers to be saved/restored rather than the target VF registers,
silently corrupting migration state.
Use the VF MMIO view for all register accesses, matching the correct
pattern used in pf_clear_vf_scratch_regs().
Fixes: b7c1b990f7 ("drm/xe/pf: Handle MMIO migration data as part of PF control")
Cc: Michał Winiarski <michal.winiarski@intel.com>
Assisted-by: Claude:claude-opus-4.6
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20260429192259.4009211-1-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
(cherry picked from commit 7d9c39cfb31ff389490ca1308767c2807a9829a6)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
PTR_ERR() returns a negative value, so comparing against the positive
EAGAIN is always true for ERR_PTR(-EAGAIN), causing pf_migration_consume()
to bail out instead of continuing to the remaining GTs. On multi-GT
platforms this can skip GTs that already have data ready.
Compare against -EAGAIN to match the intent (and the following line
that correctly uses -EAGAIN). While at it, gate PTR_ERR() with
IS_ERR().
v2: add IS_ERR() guard before PTR_ERR(). (Gustavo)
Fixes: 67df4a5cbc ("drm/xe/pf: Add data structures and handlers for migration rings")
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20260428201448.3999428-1-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
(cherry picked from commit 9d770e72e1edb54beacfce5f402edb51632811e3)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
When media GT is disabled via configfs, there is no allocation for
media_gt, which is kept as NULL. In such scenario,
intel_hdcp_gsc_check_status() results in a kernel pagefault error due to
>->uc.gsc being evaluated as an invalid memory address.
Fix that by introducing a NULL check on media_gt and bailing out early
if so.
While at it, also drop the NULL check for gsc, since it can't be NULL if
media_gt is not NULL.
v2:
- Get address for gsc only after checking that gt is not NULL.
(Shuicheng)
- Drop the NULL check for gsc. (Shuicheng)
v3:
- Add "Fixes" and "Cc: <stable...>" tags. (Matt)
Fixes: 4af50beb4e ("drm/xe: Use gsc_proxy_init_done to check proxy status")
Cc: <stable@vger.kernel.org> # v6.10+
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://patch.msgid.link/20260416-check-for-null-media_gt-in-intel_hdcp_gsc_check_status-v2-1-9adb9fd3b621@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
(cherry picked from commit bfaf87e84ca3ca3f6e275f9ae56da47a8b55ffd1)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
When preparing the panel, it seems that it always expects commands to be
transferred in LP mode. However, the disable function removes the
MIPI_DSI_MODE_LPM flag, and no other function re-adds it.
As the unprepare function contains no DSI commands, re-adding the flag
just after disabling the panel should be safe. Add the code re-adding
the flag after the two commands for disabling the panel are sent.
This fixes screen unblanking (after blanking once) on
mt8188-geralt-ciri-sku1 device.
Cc: stable@vger.kernel.org # 6.11+
Fixes: 0ef94554dc ("drm/panel: himax-hx83102: Break out as separate driver")
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260425165751.1716569-1-zhengxingda@iscas.ac.cn
When preparing the panel, it seems that it always expects commands to be
transferred in LP mode. However, the disable function removes the
MIPI_DSI_MODE_LPM flag, and no other function re-adds it.
As the unprepare function contains no DSI commands, re-adding the flag
just after disabling the panel should be safe. Add the code re-adding
the flag after the two commands for disabling the panel are sent.
This fixes error messages shown in kernel log when unblanking on
mt8183-kukui-kodama-sku32 device.
Cc: stable@vger.kernel.org
Fixes: a869b9db7a ("drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel")
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260503091708.1079962-1-zhengxingda@iscas.ac.cn
Like a number of other panel drivers, this newly merged driver
needs DRM_DISPLAY_DSC_HELPER to be enabled:
arm-linux-gnueabi-ld: drivers/gpu/drm/panel/panel-himax-hx83121a.o: in function `himax_prepare':
panel-himax-hx83121a.c:(.text+0x1024): undefined reference to `drm_dsc_pps_payload_pack'
Fixes: a7c61963b7 ("drm/panel: Add Himax HX83121A panel driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260413071043.3829868-1-arnd@kernel.org
When xa_alloc_cyclic() failed in etnaviv_sched_push_job(), the error
path skipped drm_sched_entity_push_job(). This is a violation of the DRM
scheduler contract, as once a job has been armed with drm_sched_job_arm(),
it must be pushed with drm_sched_entity_push_job(). From the DRM
scheduler documentation,
"""
drm_sched_job_arm() is a point of no return since it initializes the
fences and their sequence number etc. Once that function has been called,
you *must* submit it with drm_sched_entity_push_job() and cannot simply
abort it by calling drm_sched_job_cleanup().
"""
Fix this by splitting the fence ID allocation into two phases: first,
alloc an xarray slot before arming the job (which can fail), then fill in
the actual fence with xa_store() after arming. This way, allocation
failures are handled before the job is armed, and once armed, the job is
always pushed to the scheduler.
This also fixes a double call to drm_sched_job_cleanup(), as both
etnaviv_sched_push_job() and its caller would call it on failure.
Fixes: 764be12345 ("drm/etnaviv: convert user fence tracking to XArray")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20260402193424.2023318-1-mcanal@igalia.com
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
When the damage area resulting from a dirty memory range spans a single
scanline, the width of the rectangle is calculated dynamically because it
may not coincide with the framebuffer width.
If the dirty range ends exactly at the end of the scanline, the `bit_end`
variable is incorrectly assigned a 0 value, which results in a bogus clip
rectangle where the x2 coordinate is 0. This prevents the dirty scanline
from being flushed to the hardware.
Change the calculation of the `bit_end` value to fix the x2 coordinate
value in the above edge case.
Fixes: ded74cafee ("drm/fb-helper: Clip damage area horizontally")
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260210173545.733937-1-flavra@baylibre.com
drm_kms_helper_poll_init() initializes the output polling work and
enables polling for the DRM device. qxl enables polling before calling
drm_dev_register(), but the drm_dev_register() failure path tears down
the modeset and device state without disabling the polling helper.
The remove path also unregisters and shuts down the DRM device without
first disabling the polling helper. Add matching drm_kms_helper_poll_fini()
calls in both paths so the delayed polling work is cancelled before qxl
tears down the associated modeset/device state.
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 5ff91e4426 ("qxl: use drm helper hotplug support")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260424112543.57819-1-mhun512@gmail.com
API Fixes:
- Add missing pad and extensions check (Jonathan)
- Reject unsafe PAT indices for CPU cached memory (Jia)
Driver Fixes:
- Drop registration of guc_submit_wedged_fini from xe_guc_submit_wedge (Brost)
- Xe3p tuning and workaround fixes (Roper, Gustavo)
- USE drm mm instead of drm SA for CCS read/write (Satya)
- Fix leaks and null derefs (Shuicheng)
- Fix Wa_18022495364 (Tvrtko)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/afO05KvmFMn_7qcY@intel.com
This reverts commit 20e0c19780.
Despite claiming to add GA100 support, that commit actually has quite
a few problems. It falsely claims that there is no VBIOS. GA100 does
have a VBIOS, but it has no display engine, so it cannot use the
PRAMIN method the read VBIOS and must fall back to using PROM.
For whatever reason, the VBIOS on GA100 has an "Init-from-ROM"
(IFR) header where the PCI Expansion ROM would normally be found.
So to find that ROM, Nouveau needs to parse the IFR header.
The commit also falsely claimed that there is no graphics (GR) engine.
So rather than try to fix that commit, just revert it and start over
from scratch.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://patch.msgid.link/20260430223838.2530778-2-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Add validation in xe_vm_bind_ioctl() to reject PAT indices
with XE_COH_NONE coherency mode when used with
DRM_XE_VM_BIND_FLAG_CPU_ADDR_MIRROR.
CPU address mirror mappings use system memory that is CPU
cached, which makes them incompatible with COH_NONE PAT
indices. Allowing COH_NONE with CPU cached buffers is a
security risk, as the GPU may bypass CPU caches and read
stale sensitive data from DRAM.
Although CPU_ADDR_MIRROR does not create an immediate
mapping, the backing system memory is still CPU cached.
Apply the same PAT coherency restrictions as
DRM_XE_VM_BIND_OP_MAP_USERPTR.
v2:
- Correct fix tag
v6:
- No change
v7:
- Correct fix tag
v8:
- Rebase
v9:
- Limit the restrictions to iGPU
v10:
- Just add the iGPU logic but keep dGPU logic
Fixes: b43e864af0 ("drm/xe/uapi: Add DRM_XE_VM_BIND_FLAG_CPU_ADDR_MIRROR")
Cc: <stable@vger.kernel.org> # v6.15+
Cc: Shuicheng Lin <shuicheng.lin@intel.com>
Cc: Mathew Alwin <alwin.mathew@intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Jia Yao <jia.yao@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260417055917.2027459-3-jia.yao@intel.com
(cherry picked from commit 4d58d7535e826a3175527b6174502f0db319d7f6)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add validation in xe_vm_madvise_ioctl() to reject PAT indices with
XE_COH_NONE coherency mode when applied to CPU cached memory.
Using coh_none with CPU cached buffers is a security issue. When the
kernel clears pages before reallocation, the clear operation stays in
CPU cache (dirty). GPU with coh_none can bypass CPU caches and read
stale sensitive data directly from DRAM, potentially leaking data from
previously freed pages of other processes.
This aligns with the existing validation in vm_bind path
(xe_vm_bind_ioctl_validate_bo).
v2(Matthew brost)
- Add fixes
- Move one debug print to better place
v3(Matthew Auld)
- Should be drm/xe/uapi
- More Cc
v4(Shuicheng Lin)
- Fix kmem leak issues by the way
v5
- Remove kmem leak because it has been merged by another patch
v6
- Remove the fix which is not related to current fix
v7
- No change
v8
- Rebase
v9
- Limit the restrictions to iGPU
v10
- No change
Fixes: ada7486c56 ("drm/xe: Implement madvise ioctl for xe")
Cc: <stable@vger.kernel.org> # v6.18+
Cc: Shuicheng Lin <shuicheng.lin@intel.com>
Cc: Mathew Alwin <alwin.mathew@intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Jia Yao <jia.yao@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260417055917.2027459-2-jia.yao@intel.com
(cherry picked from commit 016ccdb674b8c899940b3944952c96a6a490d10a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When xe_gsc_read_out_header() fails, query_compatibility_version()
returns directly instead of jumping to the out_bo label. This skips
the xe_bo_unpin_map_no_vm() call, leaving the BO pinned and mapped
with no remaining reference to free it.
Fix by using goto out_bo so the error path properly cleans up the BO,
consistent with the other error handling in the same function.
Fixes: 0881cbe040 ("drm/xe/gsc: Query GSC compatibility version")
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20260417163308.3416147-1-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
(cherry picked from commit 8de86d0a843c32ca9d36864bdb92f0376a830bce)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In xe_eu_stall_stream_close(), drm_dev_put() is called before the
stream is disabled and its resources are freed. If this drops the
last reference, the device structures could be freed while the
subsequent cleanup code still accesses them, leading to a
use-after-free.
Fix this by moving drm_dev_put() after all device accesses are
complete. This matches the ordering in xe_oa_release().
Fixes: 9a0b11d4cf ("drm/xe/eustall: Add support to init, enable and disable EU stall sampling")
Cc: Harish Chegondi <harish.chegondi@intel.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Link: https://patch.msgid.link/20260415225428.3399934-1-shuicheng.lin@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 35aff528f7297e949e5e19c9cd7fd748cf1cf21c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Two error handling issues exist in xe_exec_queue_create_ioctl():
1. When xe_hw_engine_group_add_exec_queue() fails, the error path jumps
to put_exec_queue which skips xe_exec_queue_kill(). If the VM is in
preempt fence mode, xe_vm_add_compute_exec_queue() has already added
the queue to the VM's compute exec queue list. Skipping the kill
leaves the queue on that list, leading to a dangling pointer after
the queue is freed.
2. When xa_alloc() fails after xe_hw_engine_group_add_exec_queue() has
succeeded, the error path does not call
xe_hw_engine_group_del_exec_queue() to remove the queue from the hw
engine group list. The queue is then freed while still linked into
the hw engine group, causing a use-after-free.
Fix both by:
- Changing the xe_hw_engine_group_add_exec_queue() failure path to jump
to kill_exec_queue so that xe_exec_queue_kill() properly removes the
queue from the VM's compute list.
- Adding a del_hw_engine_group label before kill_exec_queue for the
xa_alloc() failure path, which removes the queue from the hw engine
group before proceeding with the rest of the cleanup.
Fixes: 7970cb3696 ("'drm/xe/hw_engine_group: Register hw engine group's exec queues")
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Assisted-by: Claude:claude-opus-4.6
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260408020647.3397933-1-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
(cherry picked from commit 37c831f401746a45d510b312b0ed7a77b1e06ec8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When xe_dma_buf_init_obj() fails, the attachment from
dma_buf_dynamic_attach() is not detached. Add dma_buf_detach() before
returning the error. Note: we cannot use goto out_err here because
xe_dma_buf_init_obj() already frees bo on failure, and out_err would
double-free it.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4.6
Reviewed-by: Mattheq Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260408175255.3402838-5-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
(cherry picked from commit a828eb185aac41800df8eae4b60501ccc0dbbe51)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When drm_gpuvm_resv_object_alloc() fails, the pre-allocated storage bo
is not freed. Add xe_bo_free(storage) before returning the error.
xe_dma_buf_init_obj() calls xe_bo_init_locked(), which frees the bo on
error. Therefore, xe_dma_buf_init_obj() must also free the bo on its own
error paths. Otherwise, since xe_gem_prime_import() cannot distinguish
whether the failure originated from xe_dma_buf_init_obj() or from
xe_bo_init_locked(), it cannot safely decide whether the bo should be
freed.
Add comments documenting the ownership semantics: on success, ownership
of storage is transferred to the returned drm_gem_object; on failure,
storage is freed before returning.
v2: Add comments to explain the free logic.
Fixes: eb289a5f6c ("drm/xe: Convert xe_dma_buf.c for exhaustive eviction")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4.6
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260408175255.3402838-4-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
(cherry picked from commit 78a6c5f899f22338bbf48b44fb8950409c5a69b9)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
xe_exec_queue_tlb_inval_last_fence_put_unlocked() uses q->vm->xe as the
first argument to xe_assert(). This function is called unconditionally
from xe_exec_queue_destroy() for all queues, including kernel queues
that have q->vm == NULL (e.g., queues created during GT init in
xe_gt_record_default_lrcs() with vm=NULL).
While current compilers optimize away the q->vm->xe dereference (even
in CONFIG_DRM_XE_DEBUG=y builds, the compiler pushes the dereference
into the WARN branch that is only taken when the assert condition is
false), the code is semantically incorrect and constitutes undefined
behavior in the C abstract machine for the NULL pointer case.
Use gt_to_xe(q->gt) instead, which is always valid for any exec queue.
This is consistent with how xe_exec_queue_destroy() itself obtains the
xe_device pointer in its own xe_assert at the top of the function.
Fixes: b2d7ec41f2 ("drm/xe: Attach last fence to TLB invalidation job queues")
Assisted-by: Claude:claude-opus-4.6
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260409003449.3405767-1-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
(cherry picked from commit 96078a1c68bf97f17fd1d08c3f58f5c5cc9ccd65)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The suballocator algorithm tracks a hole cursor at the last allocation
and tries to allocate after it. This is optimized for fence-ordered
progress, where older allocations are expected to become reusable first.
In fence-enabled mode, that ordering assumption holds. In fence-disabled
mode, allocations may be freed in arbitrary order, so limiting allocation
to the current hole window can miss valid free space and fail allocations
despite sufficient total space.
Use DRM memory manager instead of sub-allocator to get rid of this issue
as CCS read/write operations do not use fences.
Fixes: 864690cf4d ("drm/xe/vf: Attach and detach CCS copy commands with BO")
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260408110145.1639937-6-satyanarayana.k.v.p@intel.com
(cherry picked from commit 6c84b493012aeb05dec29c709377bf0e17ac6815)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The register-save-restore debugfs prints whitelist entries as offset
ranges. E.g.,
REG[0x39319c-0x39319f]: allow read access
for a single dword-sized register. However the GENMASK value used to
set the lower bits to '1' for the upper bound of the whitelist range
incorrectly included one more bit than it should have, causing the
whitelist ranges to sometimes appear twice as large as they really were.
For example,
REG[0x6210-0x6217]: allow rw access
was also intended to be a single dword-sized register whitelist (with a
range 0x6210-0x6213) but was printed incorrectly as a qword-sized range
because one too many bits was flipped on. Similar 'off by one' logic
was applied when printing 4-dword register ranges and 64-dword register
ranges as well.
Correct the GENMASK logic to print these ranges in debugfs correctly.
No impact outside of correcting the misleading debugfs output.
Fixes: d855d2246e ("drm/xe: Print whitelist while applying")
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20260408-regsr_wl_range-v1-1-e9a28c8b4264@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 1a2a722ff96749734a5585dfe7f0bea7719caa8b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
ROW_CHICKEN5 is a masked register (i.e., to adjust the value of any of
the lower 16 bits, the corresponding bit in the upper 16 bits must also
be set). Add the XE_REG_OPTION_MASKED to its definition; failure to do
so will cause workaround updates of this register to not apply properly.
Bspec: 56853
Fixes: 835cd6cbb0 ("drm/xe/xe3p_lpg: Add initial workarounds for graphics version 35.10")
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20260410-xe3p_tuning-v1-3-e206a62ee38f@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit cd84bfbba7feb4c1e72356f14de026dfda1a9e2a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
From Xe2 onward (i.e., all platforms officially supported by the Xe
driver), the GAMSTLB_CTRL register is located at offset 0x477C and
represented by the macro "GAMSTLB_CTRL" in code. However the register
formerly resided at offset 0xCF4C on Xe1-era platforms, and we also have
macro XEHP_GAMSTLB_CTRL that represents this old offset in the
unofficial/developer-only Xe1 code. When tuning for the register was
added for Xe3p_LPG, the old Xe1-era macro was accidentally used instead
of the proper macro for Xe2 and beyond, causing the tuning to not be
applied properly. Use the proper definition so that the correct offset
is written to.
Bspec: 59298
Fixes: 377c89bfaa ("drm/xe/xe3p_lpg: Set STLB bank hash mode to 4KB")
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20260410-xe3p_tuning-v1-2-e206a62ee38f@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 0b1676eafdd1ba5a5436bdca0d2a25ce56699783)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There appears to have been a silent merge conflict between some commits
updating the workaround tables on Xe's -fixes and -next branches:
- Commit bc6387a2e0 ("drm/xe/xe2_hpg: Fix handling of Wa_14019988906
& Wa_14019877138") from the fixes branch moved the Xe2_HPG instance
of two workarounds touching the PSS_CHICKEN register from the
engine_was[] table to the lrc_was[] table; the equivalent
implementation for all other platforms/IPs were already properly
located on lrc_was[]. This commit on the fixes branch is a
cherry-pick of commit e04c609eed ("drm/xe/xe2_hpg: Fix handling of
Wa_14019988906 & Wa_14019877138") that already existed on the next
branch.
- Commit 55b19abb6c ("drm/xe: Consolidate workaround entries for
Wa_14019877138") and commit c2142a1a84 ("drm/xe: Consolidate
workaround entries for Wa_14019988906") consolidated the individual
entries per IP generation for each workaround into single, larger
range-based entries.
During merge conflict resolution the Xe2_HPG-specific entries (i.e.,
those with rule "GRAPHICS_VERSION_RANGE(2001, 2002)") were accidentally
resurrected, even though the table already contains the consolidated
entries that match a superset of thse ranges. These redundant entries
don't cause any build failures but do trigger a dmesg error during probe
on BMG-G21 devices:
xe 0000:03:00.0: [drm] *ERROR* Tile0: GT0: discarding save-restore reg 7044 (clear: 00000400, set: 00000400, masked: yes, mcr: yes): ret=-22
xe 0000:03:00.0: [drm] *ERROR* Tile0: GT0: discarding save-restore reg 7044 (clear: 00000020, set: 00000020, masked: yes, mcr: yes): ret=-22
Re-drop the Xe2_HPG-specific table entries to eliminate the error.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/work_items/7433
Fixes: 17b95278ae ("Merge tag 'drm-xe-next-2026-03-02' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next")
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://patch.msgid.link/20260401-wa_merge_conflict-v1-1-b477ab53fedc@intel.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
(cherry picked from commit c79bc999442ff3c0908ab8bce92b2a3cb7d59861)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
xe_guc_submit_wedge() runs in the DMA-fence signaling path, where
GFP_KERNEL memory allocations are not permitted. However, registering
guc_submit_wedged_fini via drmm_add_action_or_reset() triggers such an
allocation.
Avoid this by moving the logic from guc_submit_wedged_fini() into
guc_submit_fini(), where wedged exec queue references are dropped during
normal teardown.
Fixes: 8ed9aaae39 ("drm/xe: Force wedged state and block GT reset upon any GPU hang")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260326210116.202585-3-matthew.brost@intel.com
(cherry picked from commit 4a706bd93c4fb156a13477e26ffdf2e633edeb10)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Some board manufacturers hardcode the EDID for the embedded
panel in the VBIOS. This EDID should be used when the panel
doesn't have a DDC.
For reference, see the legacy non-DC display code:
amdgpu_atombios_encoder_get_lcd_info()
This is necessary to support embedded connectors without DDC.
Fixes: 4562236b3b ("drm/amd/dc: Add dc display driver (v2)")
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/5192
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit eb105e63b474c11ef6a84a1c6b18100d851ff364)
When the DDC channel ID is set to CHANNEL_ID_UNKNOWN,
pass NULL to the AUX regs array.
This is necessary to support embedded connectors without DDC.
Fixes: 7c15fd86aa ("drm/amd/display: dc/dce: add initial DCE6 support (v10)")
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/5192
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 38a70e50b22a188ff601740d64dd75f46213121f)
Allow constructing the DCE link encoder without DDC,
which means the AUX registers array will be NULL.
This is necessary to support embedded connectors without DDC.
Fixes: 4562236b3b ("drm/amd/dc: Add dc display driver (v2)")
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/5192
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 87f30b101af62590faf6020d106da07efdda199b)
On some laptops, the embedded panel may not have
a DDC (display data channel) available. On these,
the EDID may be hardcoded in ACPI or the VBIOS.
In this case, use GPIO_DDC_LINE_UNKNOWN and don't fail.
Fixes: def3488eb0 ("drm/amd/display: refactor HPD to increase flexibility")
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/5192
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 75b8a6ca0e8bc3ce24572f854e95f8721b321179)
