We currently have cases where the dma_addressing_limited() gets
called with dma_mask unset. This causes a NULL pointer dereference.
Use dma_get_mask() accessor to prevent the crash.
Fixes: b866455423 ("dma-mapping: add a dma_addressing_limited helper")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The MIPI DBI standard support more pixel formats than what this helper
supports. Add an init function that lets the driver use different
format(s). This avoids open coding mipi_dbi_init() in st7586.
st7586 sets preferred_depth but this is not necessary since it only
supports one format.
v2: Forgot to remove the mipi->rotation assignment in st7586,
mipi_dbi_init_with_formats() handles it.
Cc: David Lechner <david@lechnology.com>
Acked-by: David Lechner <david@lechnology.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-11-noralf@tronnes.org
This is only used by mipi-dbi drivers so move it there.
The reason this isn't moved to the SPI subsystem is that it will in a
later patch pass a dummy rx buffer for SPI controllers that need this.
Low memory boards (64MB) can run into a problem allocating such a "large"
contiguous buffer on every transfer after a long up time.
This leaves a very specific use case, so we'll keep the function here.
mipi-dbi will first go through a refactoring though, before this will
be done.
Remove SPI todo entry now that we're done with the tinydrm.ko SPI code.
v2: Drop moving the mipi_dbi_spi_init() declaration (Sam)
Cc: David Lechner <david@lechnology.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: : David Lechner <david@lechnology.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-8-noralf@tronnes.org
Prep work before moving the function to mipi-dbi.
tinydrm_spi_transfer() was made to support one class of drivers in
drivers/staging/fbtft that has not been converted to DRM yet, so strip
away the unused functionality:
- Start byte (header) is not used.
- No driver relies on the automatic 16-bit byte swapping on little endian
machines with SPI controllers only supporting 8 bits per word.
Other changes:
- No need to initialize ret
- No need for the WARN since mipi-dbi only uses 8 and 16 bpw.
- Use spi_message_init_with_transfers()
Cc: David Lechner <david@lechnology.com>
Acked-by: : David Lechner <david@lechnology.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-7-noralf@tronnes.org
spi-bcm2835 can handle >64kB buffers now so there is no need to check
->max_dma_len. The tinydrm_spi_max_transfer_size() max_len argument is
not used by any callers, so not needed.
Then we have the spi_max module parameter. It was added because
staging/fbtft has support for it and there was a report that someone used
it to set a small buffer size to avoid popping on a USB soundcard on a
Raspberry Pi. In hindsight it shouldn't have been added, I should have
waited for it to become a problem first. I don't know it anyone is
actually using it, but since tinydrm_spi_transfer() is being moved to
mipi-dbi, I'm taking the opportunity to remove it. I'll add it back to
mipi-dbi if someone complains.
With that out of the way, spi_max_transfer_size() can be used instead.
The chosen 16kB buffer size for Type C Option 1 (9-bit) interface is
somewhat arbitrary, but a bigger buffer will have a miniscule impact on
transfer speed, so it's probably fine.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-6-noralf@tronnes.org
tinydrm drivers announce DRM_MODE_CONNECTOR_VIRTUAL for its SPI drivers.
Add a SPI connector type to match the actual connector.
X will list the connector as Unknown:
X.Org X Server 1.19.2
Release Date: 2017-03-02
<...>
[ 53523.905] (II) modeset(0): Output Unknown19-1 has no monitor section
[ 53523.908] (II) modeset(0): EDID for output Unknown19-1
[ 53523.910] (II) modeset(0): Printing probed modes for output Unknown19-1
[ 53523.911] (II) modeset(0): Modeline "320x240"x0.0 0.00 320 320 320 320 240 240 240 240 (0.0 kHz eP)
[ 53523.911] (II) modeset(0): Output Unknown19-1 connected
[ 53523.912] (II) modeset(0): Using exact sizes for initial modes
[ 53523.912] (II) modeset(0): Output Unknown19-1 using initial mode 320x240 +0+0
The weston source shows that it will be listed as UNNAMED.
v2: Split patch in core and driver changes, expand commit message (Daniel)
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: David Lechner <david@lechnology.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-2-noralf@tronnes.org
blk_mq_sched_completed_request is a function that checks if the elevator
related to the request has started_request implemented, but currently, none of
the available IO schedulers implement started_request, so remove both.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A previous fix to the stop handling on compressed capture streams causes
some knock on issues. The previous fix updated snd_compr_drain_notify to
set the state back to PREPARED for capture streams. This causes some
issues however as the handling for snd_compr_poll differs between the
two states and some user-space applications were relying on the poll
failing after the stream had been stopped.
To correct this regression whilst still fixing the original problem the
patch was addressing, update the capture handling to skip the PREPARED
state rather than skipping the SETUP state as it has done until now.
Fixes: 4f2ab5e1d1 ("ALSA: compress: Fix stop handling on compressed capture streams")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We use "pmc->idx" and the "chained" bitmap to determine if the pmc is
chained, in kvm_pmu_pmc_is_chained(). But idx might be uninitialized
(and random) when we doing this decision, through a KVM_ARM_VCPU_INIT
ioctl -> kvm_pmu_vcpu_reset(). And the test_bit() against this random
idx will potentially hit a KASAN BUG [1].
In general, idx is the static property of a PMU counter that is not
expected to be modified across resets, as suggested by Julien. It
looks more reasonable if we can setup the PMU counter idx for a vcpu
in its creation time. Introduce a new function - kvm_pmu_vcpu_init()
for this basic setup. Oh, and the KASAN BUG will get fixed this way.
[1] https://www.spinics.net/lists/kvm-arm/msg36700.html
Fixes: 80f393a23b ("KVM: arm/arm64: Support chained PMU counters")
Suggested-by: Andrew Murray <andrew.murray@arm.com>
Suggested-by: Julien Thierry <julien.thierry@arm.com>
Acked-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The stub function for !CONFIG_IOMMU_IOVA needs to be
'static inline'.
Fixes: effa467870 ('iommu/vt-d: Don't queue_iova() if there is no flush queue')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Note that after previous changes dpm_noirq_begin() and
dpm_noirq_end() each have only one caller, so move the code from
them to their respective callers and drop them.
Also note that dpm_noirq_resume_devices() and
dpm_noirq_suspend_devices() need not be exported any more, so make
them both static.
This change is not expected to alter functionality.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
After commit 33e4f80ee6 ("ACPI / PM: Ignore spurious SCI wakeups
from suspend-to-idle") the "noirq" phases of device suspend and
resume may run for multiple times during suspend-to-idle, if there
are spurious system wakeup events while suspended. However, this
is complicated and fragile and actually unnecessary.
The main reason for doing this is that on some systems the EC may
signal system wakeup events (power button events, for example) as
well as events that should not cause the system to resume (spurious
system wakeup events). Thus, in order to determine whether or not
a given event signaled by the EC while suspended is a proper system
wakeup one, the EC GPE needs to be dispatched and to start with that
was achieved by allowing the ACPI SCI action handler to run, which
was only possible after calling resume_device_irqs().
However, dispatching the EC GPE this way turned out to take too much
time in some cases and some EC events might be missed due to that, so
commit 68e2201185 ("ACPI: EC: Dispatch the EC GPE directly on
s2idle wake") started to dispatch the EC GPE right after a wakeup
event has been detected, so in fact the full ACPI SCI action handler
doesn't need to run any more to deal with the wakeups coming from the
EC.
Use this observation to simplify the suspend-to-idle control flow
so that the "noirq" phases of device suspend and resume are each
run only once in every suspend-to-idle cycle, which is reported to
significantly reduce power drawn by some systems when suspended to
idle (by allowing them to reach a deep platform-wide low-power state
through the suspend-to-idle flow). [What appears to happen is that
the "noirq" resume of devices after a spurious EC wakeup brings some
devices into a state in which they prevent the platform from reaching
the deep low-power state going forward, even after a subsequent
"noirq" suspend phase, and on some systems the EC triggers such
wakeups already when the "noirq" suspend of devices is running for
the first time in the given suspend/resume cycle, so the platform
cannot reach the deep low-power state at all.]
First, make acpi_s2idle_wake() use the acpi_ec_dispatch_gpe() return
value to determine whether or not the wakeup may have been triggered
by the EC (in which case the system wakeup is canceled and ACPI
events are processed in order to determine whether or not the event
is a proper system wakeup one) and use rearm_wake_irq() (introduced
by a previous change) in it to rearm the ACPI SCI for system wakeup
detection in case the system will remain suspended.
Second, drop acpi_s2idle_sync(), which is not needed any more, and
the corresponding global platform suspend-to-idle callback.
Next, drop the pm_wakeup_pending() check (which is an optimization
only) from __device_suspend_noirq() to prevent it from returning
errors on system wakeups occurring before the "noirq" phase of
device suspend is complete (as in the case of suspend-to-idle it is
not known whether or not these wakeups are suprious at that point),
in order to avoid having to carry out a "noirq" resume of devices
on a spurious system wakeup.
Finally, change the code flow in s2idle_loop() to (1) run the
"noirq" suspend of devices once before starting the loop, (2) check
for spurious EC wakeups (via the platform ->wake callback) for the
first time before calling s2idle_enter(), and (3) run the "noirq"
resume of devices once after leaving the loop.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
In some cases it is useful to know whether or not the
acpi_ev_detect_gpe() called by acpi_dispatch_gpe() has found
the GPE to be active, so return the return value of it (whose
data type is u32) from latter.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Introduce a new function, rearm_wake_irq(), allowing a wakeup IRQ
to be armed for systen wakeup detection again without running any
action handlers associated with it after it has been armed for
wakeup detection and triggered.
That is useful for IRQs, like ACPI SCI, that may deliver wakeup
as well as non-wakeup interrupts when armed for systen wakeup
detection. In those cases, it may be possible to determine whether
or not the delivered interrupt is a systen wakeup one without
running the entire action handler (or handlers, if the IRQ is
shared) for the IRQ, and if the interrupt turns out to be a
non-wakeup one, the IRQ can be rearmed with the help of the
new function.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
There are a lot of users of frag->page_offset, so use a union
to avoid converting those users today.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
One step closer to turning the skb_frag_t into a bio_vec.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
To increase commonality between block and net, we are going to replace
the skb_frag_t with the bio_vec. This patch increases the size of
skb_frag_t on 32-bit machines from 8 bytes to 12 bytes. The size is
unchanged on 64-bit machines.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for unifying the skb_frag and bio_vec, use the fine
accessors which already exist and use skb_frag_t instead of
struct skb_frag_struct.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are some questionable coding styles in this function. It looks
quite odd to deref a pointer with array indexing that only uses the
first element. Also, destroying an input/output variable halfway through
the function and then overwriting it on success is not clear. It's
better to use a local variable and the kernel macros to step through
each bit set in a bitmask and clearly show where outputs are set.
Cc: Ian Jackson <ian.jackson@citrix.com>
Cc: Julien Grall <julien.grall@arm.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
[bjorn: Changed for_each_set_bit() size to BITS_PER_LONG]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fix an incomplete devm_clk_bulk_get_optional() function documentation
by adding description of the num_clks argument as in other *clk_bulk*
functions.
Fixes: 9bd5ef0bd8 ("clk: Add devm_clk_bulk_get_optional() function")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This allows a list of requests to be issued, with the LLD only writing the
hardware doorbell when necessary, after the last request was prepared.
This is more efficient if we have lists of requests to issue, particularly
on virtualized hardware, where writing the doorbell is more expensive than
on real hardware.
The use case for this is plugged IO, where blk-mq flushes a batch of
requests all at once.
The API is the same as for blk-mq, just with blk-mq concepts tweaked to
fit the SCSI subsystem API: the "last" flag in blk_mq_queue_data becomes a
flag in scsi_cmnd, while the queue_num in the commit_rqs callback is
extracted from the hctx and passed as a parameter.
The only complication is that blk-mq uses different plugging heuristics
depending on whether commit_rqs is present or not. So we have two
different sets of blk_mq_ops and pick one depending on whether the
scsi_host template uses commit_rqs or not.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Added 'WITH Linux-syscall-note' exception which is the officially assigned
exception identifier for the kernel syscall exception. This exception
makes it possible to include GPL headers into non GPL code without
confusing license compliance tools.
Fixes: a851b2bd36 (scsi: uapi: ufs: Make utp_upiu_req visible to user space)
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Pedro Sousa <pedrom.sousa@synopsys.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This lists all the protocols that the kernel knows about, however there
are no users.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The V4L2 core sets the format description and flags for the driver in order
to ensure consistent naming.
So drop the strscpy of the description in drivers. Also remove any
description strings in driver-internal structures since those are
no longer needed.
And in am437x-vpfe.c drop an unnecessary f->type assignment in
vpfe_enum_fmt().
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[hverkuil-cisco@xs4all.nl: addressed some small suggestions from Laurent]
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The V4L2 core sets the format description and flags for the driver in order
to ensure consistent naming.
So drop the strscpy of the description in drivers. Also remove any
description strings in driver-internal structures since those are
no longer needed.
Note that bcm2835-camera.c: the formats array still stores the flags
field for compressed formats since that information is used elsewhere
in the driver. But enum_fmt doesn't use it anymore, since the core
will set the COMPRESSED flag correctly.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The V4L2 core sets the description for the driver in order to ensure
consistent naming.
So drop the strscpy of the description in drivers. Also remove any
description strings in driver-internal structures since those are
no longer needed.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
