Pull networking fixes from David Miller:
"Yeah I should have sent a pull request last week, so there is a lot
more here than usual:
1) Fix memory leak in ebtables compat code, from Wenwen Wang.
2) Several kTLS bug fixes from Jakub Kicinski (circular close on
disconnect etc.)
3) Force slave speed check on link state recovery in bonding 802.3ad
mode, from Thomas Falcon.
4) Clear RX descriptor bits before assigning buffers to them in
stmmac, from Jose Abreu.
5) Several missing of_node_put() calls, mostly wrt. for_each_*() OF
loops, from Nishka Dasgupta.
6) Double kfree_skb() in peak_usb can driver, from Stephane Grosjean.
7) Need to hold sock across skb->destructor invocation, from Cong
Wang.
8) IP header length needs to be validated in ipip tunnel xmit, from
Haishuang Yan.
9) Use after free in ip6 tunnel driver, also from Haishuang Yan.
10) Do not use MSI interrupts on r8169 chips before RTL8168d, from
Heiner Kallweit.
11) Upon bridge device init failure, we need to delete the local fdb.
From Nikolay Aleksandrov.
12) Handle erros from of_get_mac_address() properly in stmmac, from
Martin Blumenstingl.
13) Handle concurrent rename vs. dump in netfilter ipset, from Jozsef
Kadlecsik.
14) Setting NETIF_F_LLTX on mac80211 causes complete breakage with
some devices, so revert. From Johannes Berg.
15) Fix deadlock in rxrpc, from David Howells.
16) Fix Kconfig deps of enetc driver, we must have PHYLIB. From Yue
Haibing.
17) Fix mvpp2 crash on module removal, from Matteo Croce.
18) Fix race in genphy_update_link, from Heiner Kallweit.
19) bpf_xdp_adjust_head() stopped working with generic XDP when we
fixes generic XDP to support stacked devices properly, fix from
Jesper Dangaard Brouer.
20) Unbalanced RCU locking in rt6_update_exception_stamp_rt(), from
David Ahern.
21) Several memory leaks in new sja1105 driver, from Vladimir Oltean"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (214 commits)
net: dsa: sja1105: Fix memory leak on meta state machine error path
net: dsa: sja1105: Fix memory leak on meta state machine normal path
net: dsa: sja1105: Really fix panic on unregistering PTP clock
net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as well
net: dsa: sja1105: Fix broken learning with vlan_filtering disabled
net: dsa: qca8k: Add of_node_put() in qca8k_setup_mdio_bus()
net: sched: sample: allow accessing psample_group with rtnl
net: sched: police: allow accessing police->params with rtnl
net: hisilicon: Fix dma_map_single failed on arm64
net: hisilicon: fix hip04-xmit never return TX_BUSY
net: hisilicon: make hip04_tx_reclaim non-reentrant
tc-testing: updated vlan action tests with batch create/delete
net sched: update vlan action for batched events operations
net: stmmac: tc: Do not return a fragment entry
net: stmmac: Fix issues when number of Queues >= 4
net: stmmac: xgmac: Fix XGMAC selftests
be2net: disable bh with spin_lock in be_process_mcc
net: cxgb3_main: Fix a resource leak in a error path in 'init_one()'
net: ethernet: sun4i-emac: Support phy-handle property for finding PHYs
net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER
...
TC mirred actions (redirect and mirred) can send to egress or ingress of a
device. Currently only egress is used for hw offload rules.
Modify the intermediate representation for hw offload to include mirred
actions that go to ingress. This gives drivers access to such rules and
can decide whether or not to offload them.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TC mirred actions can send to egress or ingress on a given netdev. Helpers
exist to detect actions that are mirred to egress. Extend the header file
to include helpers to detect ingress mirred actions.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TC rules can impliment skbedit actions. Currently actions that modify the
skb mark are passed to offloading drivers via the hardware intermediate
representation in the flow_offload API.
Extend this to include skbedit actions that modify the packet type of the
skb. Such actions may be used to set the ptype to HOST when redirecting a
packet to ingress.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The tc_act header file contains an inline function that checks if an
action is changing the skb mark of a packet and a further function to
extract the mark.
Add similar functions to check for and get skbedit actions that modify
the packet type of the skb.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
CRC generation can be impacted by commits coming from userspace, and
enabling CRC generation may itself trigger a commit. Add notes about
this to the kerneldoc.
Changes since v1:
- Clarified that anything that would disable CRCs counts as a full
modeset, and so userspace needs to reconfigure after full modesets
Changes since v2:
- Add these notes
- Rebase onto drm-misc-next (trivial conflict in comment)
Signed-off-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link:- https://patchwork.freedesktop.org/patch/321974/
It is not desirable to relax the ABI to allow tagged user addresses into
the kernel indiscriminately. This patch introduces a prctl() interface
for enabling or disabling the tagged ABI with a global sysctl control
for preventing applications from enabling the relaxed ABI (meant for
testing user-space prctl() return error checking without reconfiguring
the kernel). The ABI properties are inherited by threads of the same
application and fork()'ed children but cleared on execve(). A Kconfig
option allows the overall disabling of the relaxed ABI.
The PR_SET_TAGGED_ADDR_CTRL will be expanded in the future to handle
MTE-specific settings like imprecise vs precise exceptions.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Now that blk_rq_map_kern can map both kmem and vmem, move internal
metadata mapping down to the lower level driver.
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hans Holmberg <hans@owltronix.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the redundant sync handling interface and wait for a completion in
the lightnvm core instead.
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hans Holmberg <hans@owltronix.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__mutex_owner() should only be used by the mutex api's.
So, to put this restiction let's move the __mutex_owner()
function definition from linux/mutex.h to mutex.c file.
There exist functions that uses __mutex_owner() like
mutex_is_locked() and mutex_trylock_recursive(), So
to keep legacy thing intact move them as well and
export them.
Move mutex_waiter structure also to keep it private to the
file.
Signed-off-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: mingo@redhat.com
Cc: will@kernel.org
Link: https://lkml.kernel.org/r/1564585504-3543-1-git-send-email-mojha@codeaurora.org
ASoC: Fixes for v5.3
A relatively large batch of mostly unremarkable fixes here, a couple of
small core fixes for fairly obscure issues, more comment/email updates
with no code impact than usual and a bunch of small driver fixes.
The support for new sample rates in the max98373 driver is a fix for the
fact that the driver declared support for those rates but would in fact
return an error if these rates were selected.
This patch adds a DRM ENUM property to the selected connectors.
This property is used for mentioning the protected content's type
from userspace to kernel HDCP authentication.
Type of the stream is decided by the protected content providers.
Type 0 content can be rendered on any HDCP protected display wires.
But Type 1 content can be rendered only on HDCP2.2 protected paths.
So when a userspace sets this property to Type 1 and starts the HDCP
enable, kernel will honour it only if HDCP2.2 authentication is through
for type 1. Else HDCP enable will be failed.
Pekka have completed the Weston DRM-backend review in
https://gitlab.freedesktop.org/wayland/weston/merge_requests/48
and the UAPI for HDCP 2.2 looks good.
The userspace is accepted in Weston.
v2:
cp_content_type is replaced with content_protection_type [daniel]
check at atomic_set_property is removed [Maarten]
v3:
%s/content_protection_type/hdcp_content_type [Pekka]
v4:
property is created for the first requested connector and then reused.
[Danvet]
v5:
kernel doc nits addressed [Daniel]
Rebased as part of patch reordering.
v6:
Kernel docs are modified [pekka]
v7:
More details in Kernel docs. [pekka]
v8:
Few more clarification into kernel doc of content type [pekka]
v9:
Small fixes in coding style.
v10:
Moving DRM_MODE_HDCP_CONTENT_TYPEx definition to drm_hdcp.h [pekka]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/320957/?series=57232&rev=14
dev_groups added to struct driver
Persistent tag for others to pull this branch from
This is the first patch in a longer series that adds the ability for the
driver core to create and remove a list of attribute groups
automatically when the device is bound/unbound from a specific driver.
See:
https://lore.kernel.org/r/20190731124349.4474-2-gregkh@linuxfoundation.org
for details on this patch, and examples of how to use it in other
drivers.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- More changes on simplifying locking mechanisms (Chris)
- Selftests fixes and improvements (Chris)
- More work around engine tracking for better handling (Chris, Tvrtko)
- HDCP debug and info improvements (Ram, Ashuman)
- Add DSI properties (Vandita)
- Rework on sdvo support for better debuggability before fixing bugs (Ville)
- Display PLLs fixes and improvements, specially targeting Ice Lake (Imre, Matt, Ville)
- Perf fixes and improvements (Lionel)
- Enumerate scratch buffers (Lionel)
- Add infra to hold off preemption on a request (Lionel)
- Ice Lake color space fixes (Uma)
- Type-C fixes and improvements (Lucas)
- Fix and improvements around workarounds (Chris, John, Tvrtko)
- GuC related fixes and improvements (Chris, Daniele, Michal, Tvrtko)
- Fix on VLV/CHV display power domain (Ville)
- Improvements around Watermark (Ville)
- Favor intel_ types on intel_atomic functions (Ville)
- Don’t pass stack garbage to pcode (Ville)
- Improve display tracepoints (Steven)
- Don’t overestimate 4:2:0 link symbol clock (Ville)
- Add support for 4th pipe and transcoder (Lucas)
- Introduce initial support for Tiger Lake platform (Daniele, Lucas, Mahesh, Jose, Imre, Mika, Vandita, Rodrigo, Michel)
- PPGTT allocation simplification (Chris)
- Standardize function names and suffixes to make clean, symmetric and let checkpatch happy (Janusz)
- Skip SINK_COUNT read on CH7511 (Ville)
- Fix on kernel documentation (Chris, Michal)
- Add modular FIA (Anusha, Lucas)
- Fix EHL display (Matt, Vivek)
- Enable hotplug retry (Imre, Jose)
- Disable preemption under GVT (Chris)
- OA; Reconfigure context on the fly (Chris)
- Fixes and improvements around engine reset. (Chris)
- Small clean up on display pipe fault mask (Ville)
- Make sure cdclk is high enough for DP audio on VLV/CHV (Ville)
- Drop some wmb() and improve pwrite flush (Chris)
- Fix critical PSR regression (DK)
- Remove unused variables (YueHaibing)
- Use dev_get_drvdata for simplification (Chunhong)
- Use upstream version of header tests (Jani)
drm-intel-next-2019-07-08:
- Signal fence completion from i915_request_wait (Chris)
- Fixes and improvements around rings pin/unpin (Chris)
- Display uncore prep patches (Daniele)
- Execlists preemption improvements (Chris)
- Selftests fixes and improvements (Chris)
- More Elkhartlake enabling work (Vandita, Jose, Matt, Vivek)
- Defer address space cleanup to an RCU worker (Chris)
- Implicit dev_priv removal and GT compartmentalization and other related follow-ups (Tvrtko, Chris)
- Prevent dereference of engine before NULL check in error capture (Chris)
- GuC related fixes (Daniele, Robert)
- Many changes on active tracking, timelines and locking mechanisms (Chris)
- Disable SAMPLER_STATE prefetching on Gen11 (HW W/a) (Kenneth)
- I915_perf fixes (Lionel)
- Add Ice Lake PCI ID (Mika)
- eDP backlight fix (Lee)
- Fix various gen2 tracepoints (Ville)
- Some irq vfunc clean-up and improvements (Ville)
- Move OA files to separated folder (Michal)
- Display self contained headers clean-up (Jani)
- Preparation for 4th pile (Lucas)
- Move atomic commit, watermark and other places to use more intel_crtc_state (Maarten)
- Many Ice Lake Type C and Thunderbolt fixes (Imre)
- Fix some Ice Lake hw w/a whitelist regs (Lionel)
- Fix memleak in runtime wakeref tracking (Mika)
- Remove unused Private PPAT manager (Michal)
- Don't check PPGTT presence on PPGTT-only platforms (Michal)
- Fix ICL DSI suspend/resume (Chris)
- Fix ICL Bandwidth issues (Ville)
- Add N & CTS values for 10/12 bit deep color (Aditya)
- Moving more GT related stuff under gt folder (Chris)
- Forcewake related fixes (Chris)
- Show support for accurate sw PMU busyness tracking (Chris)
- Handle gtt double alloc failures (Chris)
- Upgrade to new GuC version (Michal)
- Improve w/a debug dumps and pull engine w/a initialization into a common (Chris)
- Look for instdone on all engines at hangcheck (Tvrtko)
- Engine lookup simplification (Chris)
- Many plane color formats fixes and improvements (Ville)
- Fix some compilation issues (YueHaibing)
- GTT page directory clean up and improvements (Mika)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190801201314.GA23635@intel.com
IMA will need to access the digest of the PKCS7 message (as calculated by
the kernel) before the signature is verified, so introduce
pkcs7_get_digest() for that purpose.
Also, modify pkcs7_digest() to detect when the digest was already
calculated so that it doesn't have to do redundant work. Verifying that
sinfo->sig->digest isn't NULL is sufficient because both places which
allocate sinfo->sig (pkcs7_parse_message() and pkcs7_note_signed_info())
use kzalloc() so sig->digest is always initialized to zero.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
IMA will use the module_signature format for append signatures, so export
the relevant definitions and factor out the code which verifies that the
appended signature trailer is valid.
Also, create a CONFIG_MODULE_SIG_FORMAT option so that IMA can select it
and be able to use mod_check_sig() without having to depend on either
CONFIG_MODULE_SIG or CONFIG_MODULES.
s390 duplicated the definition of struct module_signature so now they can
use the new <linux/module_signature.h> header instead.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Acked-by: Jessica Yu <jeyu@kernel.org>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Add new attribute named "serial_number" as a standard interface for
user space to acquire the serial number of the device.
For ST-Ericsson SoCs this is exposed by the cryptically named "soc_id"
attribute, but this provides a human readable standardized name for this
property.
Tested-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vaishali Thakkar <vaishali.thakkar@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Looks like we were slightly overzealous with the shutdown()
cleanup. Even though the sock->sk_state can reach CLOSED again,
socket->state will not got back to SS_UNCONNECTED once
connections is ESTABLISHED. Meaning we will see EISCONN if
we try to reconnect, and EINVAL if we try to listen.
Only listen sockets can be shutdown() and reused, but since
ESTABLISHED sockets can never be re-connected() or used for
listen() we don't need to try to clean up the ULP state early.
Fixes: 32857cf57f ("net/tls: fix transition through disconnect with close")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to support virtualization usage via PCIe SRIOV, this patch
adds two ioctls under FPGA Management Engine (FME) to release and
assign back the port device. In order to safely turn Port from PF
into VF and enable PCIe SRIOV, it requires user to invoke this
PORT_RELEASE ioctl to release port firstly to remove userspace
interfaces, and then configure the PF/VF access register in FME.
After disable SRIOV, it requires user to invoke this PORT_ASSIGN
ioctl to attach the port back to PF.
Ioctl interfaces:
* DFL_FPGA_FME_PORT_RELEASE
Release platform device of given port, it deletes port platform
device to remove related userspace interfaces on PF. After this
function, then it's safe to configure PF/VF access mode to VF,
and enable VFs via SRIOV.
* DFL_FPGA_FME_PORT_ASSIGN
Assign platform device of given port back to PF. After configure
PF/VF access mode to PF, this ioctl adds port platform device
back to re-enable related userspace interfaces on PF.
Signed-off-by: Zhang Yi Z <yi.z.zhang@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Acked-by: Alan Tull <atull@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/1564914022-3710-2-git-send-email-hao.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Send and Receive completion is handled on a single CPU selected at
the time each Completion Queue is allocated. Typically this is when
an initiator instantiates an RDMA transport, or when a target
accepts an RDMA connection.
Some ULPs cannot open a connection per CPU to spread completion
workload across available CPUs and MSI vectors. For such ULPs,
provide an API that allows the RDMA core to select a completion
vector based on the device's complement of available comp_vecs.
ULPs that invoke ib_alloc_cq() with only comp_vector 0 are converted
to use the new API so that their completion workloads interfere less
with each other.
Suggested-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Cc: <linux-cifs@vger.kernel.org>
Cc: <v9fs-developer@lists.sourceforge.net>
Link: https://lore.kernel.org/r/20190729171923.13428.52555.stgit@manet.1015granger.net
Signed-off-by: Doug Ledford <dledford@redhat.com>
Not even sure why it was there since the beginning. Just use IRQ
number in the sensor_data struct.
Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Current ALSA SoC is directly using component->driver->xxx,
thus, the code nested deeply, and it makes code difficult to read,
and is not good for encapsulation.
We want to implement component related function at soc-component.c,
but, some of them need to care whole snd_soc_pcm_runtime (= rtd)
connected component.
Let's call component related function which need to care with
for_each_rtdcom() loop as snd_soc_pcm_component_xxx().
This patch adds new snd_soc_pcm_component_pcm_free() and use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k1c54czu.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ALSA SoC is directly using component->driver->xxx,
thus, the code nested deeply, and it makes code difficult to read,
and is not good for encapsulation.
We want to implement component related function at soc-component.c,
but, some of them need to care whole snd_soc_pcm_runtime (= rtd)
connected component.
Let's call component related function which need to care with
for_each_rtdcom() loop as snd_soc_pcm_component_xxx().
This patch adds new snd_soc_pcm_component_pcm() and use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lfwl4czy.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ALSA SoC is directly using component->driver->ops->xxx,
thus, the code nested deeply, and it makes code difficult to read,
and is not good for encapsulation.
We want to implement component related function at soc-component.c,
but, some of them need to care whole snd_soc_pcm_runtime (= rtd)
connected component.
Let's call component related function which need to care with
for_each_rtdcom() loop as snd_soc_pcm_component_xxx().
This patch adds new snd_soc_pcm_component_mmap() and use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87muh14d02.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ALSA SoC is directly using component->driver->ops->xxx,
thus, the code nested deeply, and it makes code difficult to read,
and is not good for encapsulation.
We want to implement component related function at soc-component.c,
but, some of them need to care whole snd_soc_pcm_runtime (= rtd)
connected component.
Let's call component related function which need to care with
for_each_rtdcom() loop as snd_soc_pcm_component_xxx().
This patch adds new snd_soc_pcm_component_page() and use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o91h4d06.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ALSA SoC is directly using component->driver->ops->xxx,
thus, the code nested deeply, and it makes code difficult to read,
and is not good for encapsulation.
We want to implement component related function at soc-component.c,
but, some of them need to care whole snd_soc_pcm_runtime (= rtd)
connected component.
Let's call component related function which need to care with
for_each_rtdcom() loop as snd_soc_pcm_component_xxx().
This patch adds new snd_soc_pcm_component_copy_user() and use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pnlx4d0a.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ALSA SoC is directly using component->driver->ops->xxx,
thus, the code nested deeply, and it makes code difficult to read,
and is not good for encapsulation.
We want to implement component related function at soc-component.c,
but, some of them need to care whole snd_soc_pcm_runtime (= rtd)
connected component.
Let's call component related function which need to care with
for_each_rtdcom() loop as snd_soc_pcm_component_xxx().
This patch adds new snd_soc_pcm_component_ioctrl() and use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r26d4d0f.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ALSA SoC is directly using component->driver->ops->xxx,
thus, the code nested deeply, and it makes code difficult to read,
and is not good for encapsulation.
We want to implement component related function at soc-component.c,
but, some of them need to care whole snd_soc_pcm_runtime (= rtd)
connected component.
Let's call component related function which need to care with
for_each_rtdcom() loop as snd_soc_pcm_component_xxx().
This patch adds new snd_soc_pcm_component_pointer() and use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sgqt4d0j.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc-dapm / soc-core are using a long way round to call
.set_bias_level.
if (driver->set_bias_level)
dapm->set_bias_level = ...;
...
if (dapm->set_bias_level)
ret = dapm->set_bias_level(...);
We can directly call it via driver->set_bias_level.
One note here is that both Card and Component have dapm,
but, Card's dapm doesn't have dapm->component.
We need to check it.
This patch moves snd_soc_component_set_bias_level() to soc-component.c
and updates parameters.
dapm->set_bias_level is no longer needed
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tvb94d0n.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc-dapm / soc-core are using a long way round to call
.stream_event.
if (driver->stream_event)
dapm->stream_event = ...;
...
if (dapm->stream_event)
ret = dapm->stream_event(...);
We can directly call it via driver->stream_event.
One note here is that both Card and Component have dapm,
but, Card's dapm doesn't have dapm->component.
We need to check it.
This patch moves snd_soc_component_stream_event() to soc-component.c
and updates parameters.
dapm->stream_event is no longer needed
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v9vp4d0r.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc-dapm / soc-core are using a long way round to call
.seq_notifier.
if (driver->seq_notifier)
dapm->seq_notifier = ...;
...
if (dapm->seq_notifier)
ret = dapm->seq_notifier(...);
We can directly call it via driver->seq_notifier.
One note here is that both Card and Component have dapm,
but, Card's dapm doesn't have dapm->component.
We need to check it.
This patch moves snd_soc_component_seq_notifier() to soc-component.c,
and updates parameters.
dapm->seq_notifier is no longer needed
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wog54d0v.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
