Merge ACPI bus type driver changes, ACPI backlight driver updates and a
series of cleanups related to of.h for 6.4-rc1:
- Ensure that ACPI notify handlers are not running after removal and
clean up code in acpi_sb_notify() (Rafael Wysocki).
- Remove register_backlight_delay module option and code and remove
quirks for false-positive backlight control support advertised on
desktop boards (Hans de Goede).
- Replace irqdomain.h include with struct declarations in ACPI headers
and update several pieces of code previously including of.h
implicitly through those headers (Rob Herring).
* acpi-bus:
ACPI: bus: Ensure that notify handlers are not running after removal
ACPI: bus: Add missing braces to acpi_sb_notify()
* acpi-video:
ACPI: video: Remove desktops without backlight DMI quirks
ACPI: video: Remove register_backlight_delay module option and code
* acpi-misc:
ACPI: Replace irqdomain.h include with struct declarations
fpga: lattice-sysconfig-spi: Add explicit include for of.h
tpm: atmel: Add explicit include for of.h
virtio-mmio: Add explicit include for of.h
pata: ixp4xx: Add explicit include for of.h
ata: pata_macio: Add explicit include of irqdomain.h
serial: 8250_tegra: Add explicit include for of.h
net: rfkill-gpio: Add explicit include for of.h
staging: iio: resolver: ad2s1210: Add explicit include for of.h
iio: adc: ad7292: Add explicit include for of.h
The fbdev test of IGT may write after EOF, which lead to out-of-bound
access for drm drivers with fbdev-generic. For example, run fbdev test
on a x86+ast2400 platform, with 1680x1050 resolution, will cause the
linux kernel hang with the following call trace:
Oops: 0000 [#1] PREEMPT SMP PTI
[IGT] fbdev: starting subtest eof
Workqueue: events drm_fb_helper_damage_work [drm_kms_helper]
[IGT] fbdev: starting subtest nullptr
RIP: 0010:memcpy_erms+0xa/0x20
RSP: 0018:ffffa17d40167d98 EFLAGS: 00010246
RAX: ffffa17d4eb7fa80 RBX: ffffa17d40e0aa80 RCX: 00000000000014c0
RDX: 0000000000001a40 RSI: ffffa17d40e0b000 RDI: ffffa17d4eb80000
RBP: ffffa17d40167e20 R08: 0000000000000000 R09: ffff89522ecff8c0
R10: ffffa17d4e4c5000 R11: 0000000000000000 R12: ffffa17d4eb7fa80
R13: 0000000000001a40 R14: 000000000000041a R15: ffffa17d40167e30
FS: 0000000000000000(0000) GS:ffff895257380000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffa17d40e0b000 CR3: 00000001eaeca006 CR4: 00000000001706e0
Call Trace:
<TASK>
? drm_fbdev_generic_helper_fb_dirty+0x207/0x330 [drm_kms_helper]
drm_fb_helper_damage_work+0x8f/0x170 [drm_kms_helper]
process_one_work+0x21f/0x430
worker_thread+0x4e/0x3c0
? __pfx_worker_thread+0x10/0x10
kthread+0xf4/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
</TASK>
CR2: ffffa17d40e0b000
---[ end trace 0000000000000000 ]---
The is because damage rectangles computed by
drm_fb_helper_memory_range_to_clip() function is not guaranteed to be
bound in the screen's active display area. Possible reasons are:
1) Buffers are allocated in the granularity of page size, for mmap system
call support. The shadow screen buffer consumed by fbdev emulation may
also choosed be page size aligned.
2) The DIV_ROUND_UP() used in drm_fb_helper_memory_range_to_clip()
will introduce off-by-one error.
For example, on a 16KB page size system, in order to store a 1920x1080
XRGB framebuffer, we need allocate 507 pages. Unfortunately, the size
1920*1080*4 can not be divided exactly by 16KB.
1920 * 1080 * 4 = 8294400 bytes
506 * 16 * 1024 = 8290304 bytes
507 * 16 * 1024 = 8306688 bytes
line_length = 1920*4 = 7680 bytes
507 * 16 * 1024 / 7680 = 1081.6
off / line_length = 507 * 16 * 1024 / 7680 = 1081
DIV_ROUND_UP(507 * 16 * 1024, 7680) will yeild 1082
memcpy_toio() typically issue the copy line by line, when copy the last
line, out-of-bound access will be happen. Because:
1082 * line_length = 1082 * 7680 = 8309760, and 8309760 > 8306688
Note that userspace may still write to the invisiable area if a larger
buffer than width x stride is exposed. But it is not a big issue as
long as there still have memory resolve the access if not drafting so
far.
- Also limit the y1 (Daniel)
- keep fix patch it to minimal (Daniel)
- screen_size is page size aligned because of it need mmap (Thomas)
- Adding fixes tag (Thomas)
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Fixes: aa15c677cc ("drm/fb-helper: Fix vertical damage clipping")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/dri-devel/ad44df29-3241-0d9e-e708-b0338bf3c623@189.cn/
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230420030500.1578756-1-suijingfeng@loongson.cn
[Why]
1. It could hit bandwidth limitdation under single dimm
memory when connecting 8K external monitor.
2. IsSupportedVidPn got validation failed with
2K240Hz eDP + 8K24Hz external monitor.
3. It's better to filter out such combination in
EnumVidPnCofuncModality
4. For short term, filter out in dc bandwidth validation.
[How]
Force 2K@240Hz+8K@24Hz timing validation false in dc.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Daniel Miess <Daniel.Miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
After gpu-reset, sometimes the driver fails to enable vblank irq,
causing flip_done timed out and the desktop freezed.
During gpu-reset, we disable and enable vblank irq in dm_suspend() and
dm_resume(). Later on in amdgpu_irq_gpu_reset_resume_helper(), we check
irqs' refcount and decide to enable or disable the irqs again.
However, we have 2 sets of API for controling vblank irq, one is
dm_vblank_get/put() and another is amdgpu_irq_get/put(). Each API has
its own refcount and flag to store the state of vblank irq, and they
are not synchronized.
In drm we use the first API to control vblank irq but in
amdgpu_irq_gpu_reset_resume_helper() we use the second set of API.
The failure happens when vblank irq was enabled by dm_vblank_get()
before gpu-reset, we have vblank->enabled true. However, during
gpu-reset, in amdgpu_irq_gpu_reset_resume_helper() vblank irq's state
checked from amdgpu_irq_update() is DISABLED. So finally it disables
vblank irq again. After gpu-reset, if there is a cursor plane commit,
the driver will try to enable vblank irq by calling drm_vblank_enable(),
but the vblank->enabled is still true, so it fails to turn on vblank
irq and causes flip_done can't be completed in vblank irq handler and
desktop become freezed.
[How]
Combining the 2 vblank control APIs by letting drm's API finally calls
amdgpu_irq's API, so the irq's refcount and state of both APIs can be
synchronized. Also add a check to prevent refcount from being less then
0 in amdgpu_irq_put().
v2:
- Add warning in amdgpu_irq_enable() if the irq is already disabled.
- Call dc_interrupt_set() in dm_set_vblank() to avoid refcount change
if it is in gpu-reset.
v3:
- Improve commit message and code comments.
Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
smatch reports
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_dccg.c:277:6: warning: symbol
'dccg314_init' was not declared. Should it be static?
This variable is only used in one file so should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When using FPO, there is some misconfiguration that happens for the lack
of configuration of the MCLK switch in some circumstances. This commit
adds the required field update when using the MCLK switch.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All clock values came from firmware, but bounding box values can be
helpful in some debug situations. This commit updates some of the values
associated with clock speed and memory channels.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Function "amdgpu_irq_update()" called by "amdgpu_device_ip_late_init()" is an atomic context.
We shouldn't access registers through KIQ since "msleep()" may be called in "amdgpu_kiq_rreg()".
[HOW]
Move function "amdgpu_virt_release_full_gpu()" after function "amdgpu_device_ip_late_init()",
to ensure that registers be accessed through RLCG instead of KIQ.
Call Trace:
<TASK>
show_stack+0x52/0x69
dump_stack_lvl+0x49/0x6d
dump_stack+0x10/0x18
__schedule_bug.cold+0x4f/0x6b
__schedule+0x473/0x5d0
? __wake_up_klogd.part.0+0x40/0x70
? vprintk_emit+0xbe/0x1f0
schedule+0x68/0x110
schedule_timeout+0x87/0x160
? timer_migration_handler+0xa0/0xa0
msleep+0x2d/0x50
amdgpu_kiq_rreg+0x18d/0x1f0 [amdgpu]
amdgpu_device_rreg.part.0+0x59/0xd0 [amdgpu]
amdgpu_device_rreg+0x3a/0x50 [amdgpu]
amdgpu_sriov_rreg+0x3c/0xb0 [amdgpu]
gfx_v10_0_set_gfx_eop_interrupt_state.constprop.0+0x16c/0x190 [amdgpu]
gfx_v10_0_set_eop_interrupt_state+0xa5/0xb0 [amdgpu]
amdgpu_irq_update+0x53/0x80 [amdgpu]
amdgpu_irq_get+0x7c/0xb0 [amdgpu]
amdgpu_fence_driver_hw_init+0x58/0x90 [amdgpu]
amdgpu_device_init.cold+0x16b7/0x2022 [amdgpu]
Signed-off-by: Chong Li <chongli2@amd.com>
Reviewed-by: JingWen.Chen2@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gcc with W=1 reports
In file included from drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/smu_v13_0.c:36:
./drivers/gpu/drm/amd/amdgpu/../pm/swsmu/inc/smu_v13_0.h:66:18: error:
‘pmfw_decoded_link_width’ defined but not used [-Werror=unused-const-variable=]
66 | static const int pmfw_decoded_link_width[7] = {0, 1, 2, 4, 8, 12, 16};
| ^~~~~~~~~~~~~~~~~~~~~~~
./drivers/gpu/drm/amd/amdgpu/../pm/swsmu/inc/smu_v13_0.h:65:18: error:
‘pmfw_decoded_link_speed’ defined but not used [-Werror=unused-const-variable=]
65 | static const int pmfw_decoded_link_speed[5] = {1, 2, 3, 4, 5};
| ^~~~~~~~~~~~~~~~~~~~~~~
These variables are defined and used in smu_v13_0_7_ppt.c and smu_v13_0_0_ppt.c.
There should be only one definition. So define the variables as globals
in smu_v13_0.c
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During a suspend/resume cycle the VO power domain will be disabled and
the VOP2 registers will reset to their default values. After that the
cached register values will be out of sync and the read/modify/write
operations we do on the window registers will result in bogus values
written. Fix this by re-initializing the register cache each time we
enable the VOP2. With this the VOP2 will show a picture after a
suspend/resume cycle whereas without this the screen stays dark.
Fixes: 604be85547 ("drm/rockchip: Add VOP2 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230413144347.3506023-1-s.hauer@pengutronix.de
Move code from ad-hoc fbdev callbacks into DRM client functions
and remove the old callbacks. The functions instruct the client
to poll for changed output or restore the display. The DRM core
calls both, the old callbacks and the new client helpers, from
the same places. The new functions perform the same operation as
before, so there's no change in functionality.
Replace all code that initializes or releases fbdev emulation
throughout the driver. Instead initialize the fbdev client by a
single call to exynos_fbdev_setup() after exynos has registered its
DRM device. As in most drivers, exynos' fbdev emulation now acts
like a regular DRM client.
The fbdev client setup consists of the initial preparation and the
hot-plugging of the display. The latter creates the fbdev device
and sets up the fbdev framebuffer. The setup performs display
hot-plugging once. If no display can be detected, DRM probe helpers
re-run the detection on each hotplug event.
A call to drm_dev_unregister() releases the client automatically.
No further action is required within exynos. If the fbdev framebuffer
has been fully set up, struct fb_ops.fb_destroy implements the
release. For partially initialized emulation, the fbdev client
reverts the initial setup.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Initialize the fbdev client in the fbdev code with empty helper
functions. Also clean up the client. The helpers will later
implement various functionality of the DRM client. No functional
changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The DRM device stores a pointer to the fbdev helper. Remove struct
exynos_drm_private.fb_helper, which contains the same value. No
functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Remove struct exynos_drm_fbdev, which is an empty wrapper around
struct drm_fb_helper. Use the latter directly. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Fbdev's framebuffer stores a pointer to the GEM object. Remove
struct exynos_drm_fbdev.exynos_gem, which contains the same value.
No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
When HuC is loaded by GSC, there is no header definition for the kernel
to look at and firmware is just handed to GSC. However when reading the
version, it should still check the size of the blob to guarantee it's not
incurring into out-of-bounds array access.
If firmware is smaller than expected, the following message is now
printed:
# echo boom > /lib/firmware/i915/dg2_huc_gsc.bin
# dmesg | grep -i huc
[drm] GT0: HuC firmware i915/dg2_huc_gsc.bin: invalid size: 5 < 184
[drm] *ERROR* GT0: HuC firmware i915/dg2_huc_gsc.bin: fetch failed -ENODATA
...
Even without this change the size, header and signature are still
checked by GSC when loading, so this only avoids the out-of-bounds array
access.
Fixes: a7b516bd98 ("drm/i915/huc: Add fetch support for gsc-loaded HuC binary")
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230413200349.3492571-1-lucas.demarchi@intel.com
(cherry picked from commit adfbae9ffe)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Add some basic definitions and structure member. Inscrease MAX_WB slots
to 1024 to support the increasing number of rings for multiple partitions.
v2: unify naming style
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It looks better to place this field in ring
structure. Also drop the repeated ring funcs definitions
if there's no difference except for vmhub field.
v2: rename the field to vm_hub like others (Le)
v3: apply the changes to new ip blocks (Hawking)
v4: fix vcn sw ring (Alex)
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
