* kvm-arm64/6.6/misc:
: .
: Misc KVM/arm64 updates for 6.6:
:
: - Don't unnecessary align non-stack allocations in the EL2 VA space
:
: - Drop HCR_VIRT_EXCP_MASK, which was never used...
:
: - Don't use smp_processor_id() in kvm_arch_vcpu_load(),
: but the cpu parameter instead
:
: - Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()
:
: - Remove prototypes without implementations
: .
KVM: arm64: Remove size-order align in the nVHE hyp private VA range
KVM: arm64: Remove unused declarations
KVM: arm64: Remove redundant kvm_set_pfn_accessed() from user_mem_abort()
KVM: arm64: Drop HCR_VIRT_EXCP_MASK
KVM: arm64: Use the known cpu id instead of smp_processor_id()
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/6.6/pmu-fixes:
: .
: Another set of PMU fixes, coutrtesy of Reiji Watanabe.
: From the cover letter:
:
: "This series fixes a couple of PMUver related handling of
: vPMU support.
:
: On systems where the PMUVer is not uniform across all PEs,
: KVM currently does not advertise PMUv3 to the guest,
: even if userspace successfully runs KVM_ARM_VCPU_INIT with
: KVM_ARM_VCPU_PMU_V3."
:
: Additionally, a fix for an obscure counter oversubscription
: issue happening when the hsot profines the guest's EL0.
: .
KVM: arm64: pmu: Guard PMU emulation definitions with CONFIG_KVM
KVM: arm64: pmu: Resync EL0 state on counter rotation
KVM: arm64: PMU: Don't advertise STALL_SLOT_{FRONTEND,BACKEND}
KVM: arm64: PMU: Don't advertise the STALL_SLOT event
KVM: arm64: PMU: Avoid inappropriate use of host's PMUVer
KVM: arm64: PMU: Disallow vPMU on non-uniform PMUVer
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/tlbi-range:
: .
: FEAT_TLBIRANGE support, courtesy of Raghavendra Rao Ananta.
: From the cover letter:
:
: "In certain code paths, KVM/ARM currently invalidates the entire VM's
: page-tables instead of just invalidating a necessary range. For example,
: when collapsing a table PTE to a block PTE, instead of iterating over
: each PTE and flushing them, KVM uses 'vmalls12e1is' TLBI operation to
: flush all the entries. This is inefficient since the guest would have
: to refill the TLBs again, even for the addresses that aren't covered
: by the table entry. The performance impact would scale poorly if many
: addresses in the VM is going through this remapping.
:
: For architectures that implement FEAT_TLBIRANGE, KVM can replace such
: inefficient paths by performing the invalidations only on the range of
: addresses that are in scope. This series tries to achieve the same in
: the areas of stage-2 map, unmap and write-protecting the pages."
: .
KVM: arm64: Use TLBI range-based instructions for unmap
KVM: arm64: Invalidate the table entries upon a range
KVM: arm64: Flush only the memslot after write-protect
KVM: arm64: Implement kvm_arch_flush_remote_tlbs_range()
KVM: arm64: Define kvm_tlb_flush_vmid_range()
KVM: arm64: Implement __kvm_tlb_flush_vmid_range()
arm64: tlb: Implement __flush_s2_tlb_range_op()
arm64: tlb: Refactor the core flush algorithm of __flush_tlb_range
KVM: Move kvm_arch_flush_remote_tlbs_memslot() to common code
KVM: Allow range-based TLB invalidation from common code
KVM: Remove CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL
KVM: arm64: Use kvm_arch_flush_remote_tlbs()
KVM: Declare kvm_arch_flush_remote_tlbs() globally
KVM: Rename kvm_arch_flush_remote_tlb() to kvm_arch_flush_remote_tlbs()
Signed-off-by: Marc Zyngier <maz@kernel.org>
Instead of if conditions with line splits, use the usual error handling
pattern with a separate variable to improve readability.
The second check can use reverse logic which reduces indentation level.
No functional changes intended.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Since the 'cpus' field of policy structure will become empty in the
cpufreq core API, it is better to use 'related_cpus' in the exit()
callback of driver.
Fixes: c3274763bf ("cpufreq: powernow-k8: Initialize per-cpu data-structures properly")
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Convert the Xilinx GMII to RGMII Converter device tree binding
documentation to json schema.
This converter is usually used as gem <---> gmii2rgmii <---> external phy
and, it's phy-handle should point to the phandle of the external phy.
Signed-off-by: Pranavi Somisetty <pranavi.somisetty@amd.com>
Signed-off-by: Harini Katakam <harini.katakam@amd.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With introduction of ERI access control in RG.0 base address of the PMU
unit registers has changed. Add support for the new PMU configuration.
Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Sabrina Dubroca says:
====================
tls: expand tls_cipher_size_desc to simplify getsockopt/setsockopt
Commit 2d2c5ea242 ("net/tls: Describe ciphers sizes by const
structs") introduced tls_cipher_size_desc to describe the size of the
fields of the per-cipher crypto_info structs, and commit ea7a9d88ba
("net/tls: Use cipher sizes structs") used it, but only in
tls_device.c and tls_device_fallback.c, and skipped converting similar
code in tls_main.c and tls_sw.c.
This series expands tls_cipher_size_desc (renamed to tls_cipher_desc
to better fit this expansion) to fully describe a cipher:
- offset of the fields within the per-cipher crypto_info
- size of the full struct (for copies to/from userspace)
- offload flag
- algorithm name used by SW crypto
With these additions, we can remove ~350L of
switch (crypto_info->cipher_type) { ... }
from tls_set_device_offload, tls_sw_fallback_init,
do_tls_getsockopt_conf, do_tls_setsockopt_conf, tls_set_sw_offload
(mainly do_tls_getsockopt_conf and tls_set_sw_offload).
This series also adds the ARIA ciphers to the tls selftests, and some
more getsockopt/setsockopt tests to cover more of the code changed by
this series.
====================
Link: https://lore.kernel.org/r/cover.1692977948.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tls_cipher_size_desc indexes ciphers by their type, but we're not
using indices 0..50 of the array. Each struct tls_cipher_size_desc is
20B, so that's a lot of unused memory. We can reindex the array
starting at the lowest used cipher_type.
Introduce the get_cipher_size_desc helper to find the right item and
avoid out-of-bounds accesses, and make tls_cipher_size_desc's size
explicit so that gcc reminds us to update TLS_CIPHER_MIN/MAX when we
add a new cipher.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/5e054e370e240247a5d37881a1cd93a67c15f4ca.1692977948.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Donald Hunter says:
====================
tools/net/ynl: Add support for netlink-raw families
This patchset adds support for netlink-raw families such as rtnetlink.
Patch 1 fixes a typo in existing schemas
Patch 2 contains the schema definition
Patches 3 & 4 update the schema documentation
Patches 5 - 9 extends ynl
Patches 10 - 12 add several netlink-raw specs
The netlink-raw schema is very similar to genetlink-legacy and I thought
about making the changes there and symlinking to it. On balance I
thought that might be problematic for accurate schema validation.
rtnetlink doesn't seem to fit into unified or directional message
enumeration models. It seems like an 'explicit' model would be useful,
to force the schema author to specify the message ids directly.
There is not yet support for notifications because ynl currently doesn't
support defining 'event' properties on a 'do' operation. The message ids
are shared so ops need to be both sync and async. I plan to look at this
in a future patch.
The link and route messages contain different nested attributes
dependent on the type of link or route. Decoding these will need some
kind of attr-space selection that uses the value of another attribute as
the selector key. These nested attributes have been left with type
'binary' for now.
====================
Link: https://lore.kernel.org/r/20230825122756.7603-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add schema for rt link with support for newlink, dellink, getlink,
setlink and getstats.
A dummy link can be created like this:
sudo ./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/rt_link.yaml \
--do newlink --create \
--json '{"ifname": "dummy0", "linkinfo": {"kind": "dummy"}}'
For example, offload stats can be fetched like this:
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/rt_link.yaml \
--dump getstats --json '{ "filter-mask": 8 }'
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230825122756.7603-12-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This schema is largely a copy of the genetlink-legacy schema with the
following modifications:
- change the schema id to netlink-raw
- add a top-level protonum property, e.g. 0 (for NETLINK_ROUTE)
- change the protocol enumeration to netlink-raw, removing the
genetlink options.
- replace doc references to generic netlink with raw netlink
- add a value property to mcast-group definitions
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230825122756.7603-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Saeed Mahameed says:
====================
{devlink,mlx5}: Add port function attributes for ipsec
From Dima:
Introduce hypervisor-level control knobs to set the functionality of PCI
VF devices passed through to guests. The administrator of a hypervisor
host may choose to change the settings of a port function from the
defaults configured by the device firmware.
The software stack has two types of IPsec offload - crypto and packet.
Specifically, the ip xfrm command has sub-commands for "state" and
"policy" that have an "offload" parameter. With ip xfrm state, both
crypto and packet offload types are supported, while ip xfrm policy can
only be offloaded in packet mode.
The series introduces two new boolean attributes of a port function:
ipsec_crypto and ipsec_packet. The goal is to provide a similar level of
granularity for controlling VF IPsec offload capabilities, which would
be aligned with the software model. This will allow users to decide if
they want both types of offload enabled for a VF, just one of them, or
none at all (which is the default).
At a high level, the difference between the two knobs is that with
ipsec_crypto, only XFRM state can be offloaded. Specifically, only the
crypto operation (Encrypt/Decrypt) is offloaded. With ipsec_packet, both
XFRM state and policy can be offloaded. Furthermore, in addition to
crypto operation offload, IPsec encapsulation is also offloaded. For
XFRM state, choosing between crypto and packet offload types is
possible. From the HW perspective, different resources may be required
for each offload type.
Examples of when a user prefers to enable IPsec packet offload for a VF
when using switchdev mode:
$ devlink port show pci/0000:06:00.0/1
pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0
function:
hw_addr 00:00:00:00:00:00 roce enable migratable disable ipsec_crypto disable ipsec_packet disable
$ devlink port function set pci/0000:06:00.0/1 ipsec_packet enable
$ devlink port show pci/0000:06:00.0/1
pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0
function:
hw_addr 00:00:00:00:00:00 roce enable migratable disable ipsec_crypto disable ipsec_packet enable
This enables the corresponding IPsec capability of the function before
it's enumerated, so when the driver reads the capability from the device
firmware, it is enabled. The driver is then able to configure
corresponding features and ops of the VF net device to support IPsec
state and policy offloading.
v2: https://lore.kernel.org/netdev/20230421104901.897946-1-dchumak@nvidia.com/
====================
Link: https://lore.kernel.org/r/20230825062836.103744-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement devlink port function commands to enable / disable IPsec
packet offloads. This is used to control the IPsec capability of the
device.
When ipsec_offload is enabled for a VF, it prevents adding IPsec packet
offloads on the PF, because the two cannot be active simultaneously due
to HW constraints. Conversely, if there are any active IPsec packet
offloads on the PF, it's not allowed to enable ipsec_packet on a VF,
until PF IPsec offloads are cleared.
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230825062836.103744-9-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement devlink port function commands to enable / disable IPsec
crypto offloads. This is used to control the IPsec capability of the
device.
When ipsec_crypto is enabled for a VF, it prevents adding IPsec crypto
offloads on the PF, because the two cannot be active simultaneously due
to HW constraints. Conversely, if there are any active IPsec crypto
offloads on the PF, it's not allowed to enable ipsec_crypto on a VF,
until PF IPsec offloads are cleared.
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230825062836.103744-8-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5 HW can't perform IPsec offload operation simultaneously both on PF
and VFs at the same time. While the previous patches added devlink knobs
to change IPsec capabilities dynamically, there is a need to add a logic
to block such IPsec capabilities for the cases when IPsec is already
configured.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230825062836.103744-7-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
