There's no need to store all this stuff in intel_fbc_state_cache.
Just check it all against the plane/crtc states and store only
what we need. Probably more should get nuked still, but this
is a start.
So what we'll do is:
- each plane will check its own state and update its local
no_fbc_reason
- the per-plane no_fbc_reason (if any) then gets propagated
to the cache->no_fbc_reason while doing the actual update
- fbc->no_fbc_reason gets updated in the end with either
the value from the cache or directly from frontbuffer
tracking
It's still a bit messy, but should hopefuly get cleaned up
more in the future. At least now we can observe each plane's
reasons for rejecting FBC now more consistently, and we don't
have so mcuh redundant state store all over the place.
v2: store no_fbc_reason per-plane instead of per-pipe
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-4-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Let's just stick to 32bit mmio accesses so we can get rid
of the bare "uncore" reg access in display code. The register
are defined as 32bit in the spec anyway.
We could define a 64bit "de" variant I suppose, but doesn't
really make much sense just for this one case, and when we
start to use the DSB for this stuff we'd also need another
64bit variant for that. Just easier to do 32bit always.
While at it we can reorder stuff a bit so that we write the
registers in order of increasing offset (more or less).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211201152552.7821-2-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
PLANE_CUS_CTL has a restriction of 4096 width even though
PLANE_SIZE and scaler size registers supports max 5120.
Take care of this restriction in max_width.
Without this patch, when 5k content is sent on HDR plane
with NV12 content, FIFO underrun is seen and screen blanks
out.
v2: Addressed review comments from Ville. Added separate
functions for max_width - for HDR and SDR
v3: Addressed review comments from Ville. Changed names of
HDR and SDR max_width functions to icl_hdr_plane_max_width
and icl_sdr_plane_max_width
v4: Fixed paranthesis alignment. No code change
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
[vsyrjala: Fix alignment]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211202110836.17536-1-vidya.srinivas@intel.com
While working on supporting the Intel HDR backlight interface, I noticed
that there's a couple of laptops that will very rarely manage to boot up
without detecting Intel HDR backlight support - even though it's supported
on the system. One example of such a laptop is the Lenovo P17 1st
generation.
Following some investigation Ville Syrjälä did through the docs they have
available to them, they discovered that there's actually supposed to be a
30ms wait after writing the source OUI before we begin setting up the rest
of the backlight interface.
This seems to be correct, as adding this 30ms delay seems to have
completely fixed the probing issues I was previously seeing. So - let's
start performing a 30ms wait after writing the OUI, which we do in a manner
similar to how we keep track of PPS delays (e.g. record the timestamp of
the OUI write, and then wait for however many ms are left since that
timestamp right before we interact with the backlight) in order to avoid
waiting any longer then we need to. As well, this also avoids us performing
this delay on systems where we don't end up using the HDR backlight
interface.
V3:
* Move last_oui_write into intel_dp
V2:
* Move panel delays into intel_pps
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Fixes: 4a8d79901d ("drm/i915/dp: Enable Intel's HDR backlight interface (only SDR for now)")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.12+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211130212912.212044-1-lyude@redhat.com
TileF(Tile4 in bspec) format is 4K tile organized into
64B subtiles with same basic shape as for legacy TileY
which will be supported by Display13.
v2: - Fixed wrong case condition(Jani Nikula)
- Increased I915_FORMAT_MOD_F_TILED up to 12(Imre Deak)
v3: - s/I915_TILING_F/TILING_4/g
- s/I915_FORMAT_MOD_F_TILED/I915_FORMAT_MOD_4_TILED/g
- Removed unneeded fencing code
v4: - Rebased, fixed merge conflict with new table-oriented
format modifier checking(Stan)
- Replaced the rest of "Tile F" mentions to "Tile 4"(Stan)
v5: - Still had to remove some Tile F mentionings
- Moved has_4tile from adlp to DG2(Ramalingam C)
- Check specifically for DG2, but not the Display13(Imre)
v6: - Moved Tile4 associating struct for modifier/display to
the beginning(Imre Deak)
- Removed unneeded case I915_FORMAT_MOD_4_TILED modifier
checks(Imre Deak)
- Fixed I915_FORMAT_MOD_4_TILED to be 9 instead of 12
(Imre Deak)
v7: - Fixed display_ver to { 13, 13 }(Imre Deak)
- Removed redundant newline(Imre Deak)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211122211420.31584-1-stanislav.lisovskiy@intel.com
Let's enable runtime pm autosuspend by default everywhere.
So, we can allow D3hot and bigger power savings on idle scenarios.
But at this time let's not touch the autosuspend_delay time,
what caused some regression on our previous attempt.
Also, the latest identified issue on GuC PM has been fixed by
commit 1a52faed31 ("drm/i915/guc: Take GT PM ref when deregistering
context")
v1: Enable runtime pm autosuspend by default for Gen12
and later versions.
v2: Enable runtime pm autosuspend by default for all
platforms(Syrjala Ville)
v3: Change commit message(Nikula Jani)
Signed-off-by: Tilak Tangudu <tilak.tangudu@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211116155238.3226516-1-tilak.tangudu@intel.com
Turns out the DSB has trouble correctly loading the gamma LUT.
From a cursory look maybe like some entries do not load
properly, or they get loaded with some gibberish. Unfortunately
our current kms_color/etc. tests do not seem to catch this.
I had a brief look at the generated DSB batch and it looked
correct. Tried a few quick tricks like writing the index
register twice/etc. but didn't see any improvement.
Also tried switching to the 10bit gamma mode in case
there is yet another issue with the multi-segment mode, but
even the 10bit mode was showing issues.
Switching to mmio fixes all of it. I suppose one theory is that
maybe the DSB bangs on the LUT too quickly and it can't keep up
and instead some data either gets dropped or corrupted. To confirm
that someone should try to slow down the DSB's progress a bit.
Another thought was that maybe the LUT has crappy dual porting
and you get contention if you try to load it during active
scanout. But why then would the mmio path work, unless it's
just sufficiently slow?
Whatever the case, this is currently busted so let's disable
it until we get to the root of the problem.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3916
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014181856.17581-2-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
