Add support for configuring EPCS state:
- When EPCS is enabled, send an EPCS enable request action frame
to the AP. When the AP replies with EPCS enable response, enable
EPCS by applying the QoS parameters provided by the AP. Do so for
all the valid MLD links. Once EPCS is enabled, support processing
of unsolicited EPCS enable response frames.
- When EPCS is disabled, send an EPCS teardown request to the AP
and apply the QoS parameters as obtained from the last received
beacons. Do so for all the valid links.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.7a90afd7e140.I3f602d65f5c1fd849d6c70b12307dda33aa91ccb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Hostapd switched from cooked monitor interfaces to nl80211 Dec 2011.
Drop support for the outdated cooked monitor interfaces and fix
creating the virtual monitor interfaces in the following cases:
1) We have one non-monitor and one monitor interface with
%MONITOR_FLAG_ACTIVE enabled and then delete the non-monitor
interface.
2) We only have monitor interfaces enabled on resume while at least one
has %MONITOR_FLAG_ACTIVE set.
Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de>
Link: https://patch.msgid.link/20250204111352.7004-2-Alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- btusb: Add new VID/PID 13d3/3610 for MT7922
- btusb: Add new VID/PID 13d3/3628 for MT7925
- btusb: Add MT7921e device 13d3:3576
- btusb: Add RTL8851BE device 13d3:3600
- btusb: Add ID 0x2c7c:0x0130 for Qualcomm WCN785x
- btusb: add sysfs attribute to control USB alt setting
- qca: Expand firmware-name property
- qca: Fix poor RF performance for WCN6855
- L2CAP: handle NULL sock pointer in l2cap_sock_alloc
- Allow reset via sysfs
- ISO: Allow BIG re-sync
- dt-bindings: Utilize PMU abstraction for WCN6750
- MGMT: Mark LL Privacy as stable
* tag 'for-net-next-2025-01-15' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (23 commits)
Bluetooth: MGMT: Fix slab-use-after-free Read in mgmt_remove_adv_monitor_sync
Bluetooth: qca: Fix poor RF performance for WCN6855
Bluetooth: Allow reset via sysfs
Bluetooth: Get rid of cmd_timeout and use the reset callback
Bluetooth: Remove the cmd timeout count in btusb
Bluetooth: Use str_enable_disable-like helpers
Bluetooth: btmtk: Remove resetting mt7921 before downloading the fw
Bluetooth: L2CAP: handle NULL sock pointer in l2cap_sock_alloc
Bluetooth: btusb: Add RTL8851BE device 13d3:3600
dt-bindings: bluetooth: Utilize PMU abstraction for WCN6750
Bluetooth: btusb: Add MT7921e device 13d3:3576
Bluetooth: btrtl: check for NULL in btrtl_setup_realtek()
Bluetooth: btbcm: Fix NULL deref in btbcm_get_board_name()
Bluetooth: qca: Expand firmware-name to load specific rampatch
Bluetooth: qca: Update firmware-name to support board specific nvm
dt-bindings: net: bluetooth: qca: Expand firmware-name property
Bluetooth: btusb: Add new VID/PID 13d3/3628 for MT7925
Bluetooth: btusb: Add new VID/PID 13d3/3610 for MT7922
Bluetooth: btusb: add sysfs attribute to control USB alt setting
Bluetooth: btusb: Add ID 0x2c7c:0x0130 for Qualcomm WCN785x
...
====================
Link: https://patch.msgid.link/20250117213203.3921910-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kalle Valo says:
====================
wireless-next patches for v6.14
Most likely the last "new features" pull request for v6.14 and this is
a bigger one. Multi-Link Operation (MLO) work continues both in stack
in drivers. Few new devices supported and usual fixes all over.
Major changes:
cfg80211
* Emergency Preparedness Communication Services (EPCS) station mode support
mac80211
* an option to filter a sta from being flushed
* some support for RX Operating Mode Indication (OMI) power saving
* support for adding and removing station links for MLO
iwlwifi
* new device ids
* rework firmware error handling and restart
rtw88
* RTL8812A: RFE type 2 support
* LED support
rtw89
* variant info to support RTL8922AE-VS
mt76
* mt7996: single wiphy multiband support (preparation for MLO)
* mt7996: support for more variants
* mt792x: P2P_DEVICE support
* mt7921u: TP-Link TXE50UH support
ath12k
* enable MLO for QCN9274 (although it seems to be broken with dual
band devices)
* MLO radar detection support
* debugfs: transmit buffer OFDMA, AST entry and puncture stats
* tag 'wireless-next-2025-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (322 commits)
wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize()
wifi: rtw88: add RTW88_LEDS depends on LEDS_CLASS to Kconfig
wifi: wilc1000: unregister wiphy only after netdev registration
wifi: cfg80211: adjust allocation of colocated AP data
wifi: mac80211: fix memory leak in ieee80211_mgd_assoc_ml_reconf()
wifi: ath12k: fix key cache handling
wifi: ath12k: Fix uninitialized variable access in ath12k_mac_allocate() function
wifi: ath12k: Remove ath12k_get_num_hw() helper function
wifi: ath12k: Refactor the ath12k_hw get helper function argument
wifi: ath12k: Refactor ath12k_hw set helper function argument
wifi: mt76: mt7996: add implicit beamforming support for mt7992
wifi: mt76: mt7996: fix beacon command during disabling
wifi: mt76: mt7996: fix ldpc setting
wifi: mt76: mt7996: fix definition of tx descriptor
wifi: mt76: connac: adjust phy capabilities based on band constraints
wifi: mt76: mt7996: fix incorrect indexing of MIB FW event
wifi: mt76: mt7996: fix HE Phy capability
wifi: mt76: mt7996: fix the capability of reception of EHT MU PPDU
wifi: mt76: mt7996: add max mpdu len capability
wifi: mt76: mt7921: avoid undesired changes of the preset regulatory domain
...
====================
Link: https://patch.msgid.link/20250117203529.72D45C4CEDD@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Paolo Abeni:
"Notably this includes fixes for a few regressions spotted very
recently. No known outstanding ones.
Current release - regressions:
- core: avoid CFI problems with sock priv helpers
- xsk: bring back busy polling support
- netpoll: ensure skb_pool list is always initialized
Current release - new code bugs:
- core: make page_pool_ref_netmem work with net iovs
- ipv4: route: fix drop reason being overridden in
ip_route_input_slow
- udp: make rehash4 independent in udp_lib_rehash()
Previous releases - regressions:
- bpf: fix bpf_sk_select_reuseport() memory leak
- openvswitch: fix lockup on tx to unregistering netdev with carrier
- mptcp: be sure to send ack when mptcp-level window re-opens
- eth:
- bnxt: always recalculate features after XDP clearing, fix
null-deref
- mlx5: fix sub-function add port error handling
- fec: handle page_pool_dev_alloc_pages error
Previous releases - always broken:
- vsock: some fixes due to transport de-assignment
- eth:
- ice: fix E825 initialization
- mlx5e: fix inversion dependency warning while enabling IPsec
tunnel
- gtp: destroy device along with udp socket's netns dismantle.
- xilinx: axienet: Fix IRQ coalescing packet count overflow"
* tag 'net-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
netdev: avoid CFI problems with sock priv helpers
net/mlx5e: Always start IPsec sequence number from 1
net/mlx5e: Rely on reqid in IPsec tunnel mode
net/mlx5e: Fix inversion dependency warning while enabling IPsec tunnel
net/mlx5: Clear port select structure when fail to create
net/mlx5: SF, Fix add port error handling
net/mlx5: Fix a lockdep warning as part of the write combining test
net/mlx5: Fix RDMA TX steering prio
net: make page_pool_ref_netmem work with net iovs
net: ethernet: xgbe: re-add aneg to supported features in PHY quirks
net: pcs: xpcs: actively unset DW_VR_MII_DIG_CTRL1_2G5_EN for 1G SGMII
net: pcs: xpcs: fix DW_VR_MII_DIG_CTRL1_2G5_EN bit being set for 1G SGMII w/o inband
selftests: net: Adapt ethtool mq tests to fix in qdisc graft
net: fec: handle page_pool_dev_alloc_pages error
net: netpoll: ensure skb_pool list is always initialized
net: xilinx: axienet: Fix IRQ coalescing packet count overflow
nfp: bpf: prevent integer overflow in nfp_bpf_event_output()
selftests: mptcp: avoid spurious errors on disconnect
mptcp: fix spurious wake-up on under memory pressure
mptcp: be sure to send ack when mptcp-level window re-opens
...
The hdev->reset is never used now and the hdev->cmd_timeout actually
does reset. This patch changes the call path from
hdev->cmd_timeout -> vendor_cmd_timeout -> btusb_reset -> hdev->reset
, to
hdev->reset -> vendor_reset -> btusb_reset
Which makes it clear when we export the hdev->reset to a wider usage
e.g. allowing reset from sysfs.
This patch doesn't introduce any behavior change.
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_bdaddr_list_del_with_flags() was added in 2020's
commit 8baaa4038e ("Bluetooth: Add bdaddr_list_with_flags for classic
whitelist")
but has remained unused.
hci_remove_ext_adv_instance() was added in 2020's
commit eca0ae4aea ("Bluetooth: Add initial implementation of BIS
connections")
but has remained unused.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This marks LL Privacy as stable by removing its experimental UUID and
move its functionality to Device Flag (HCI_CONN_FLAG_ADDRESS_RESOLUTION)
which can be set by MGMT Device Set Flags so userspace retain control of
the feature.
Link: https://github.com/bluez/bluez/issues/1028
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
XPS can cause reorders because of the relaxed OOO
conditions for pure ACK packets.
For hosts not using RFS, what can happpen is that ACK
packets are sent on behalf of the cpu processing NIC
interrupts, selecting TX queue A for ACK packet P1.
Then a subsequent sendmsg() can run on another cpu.
TX queue selection uses the socket hash and can choose
another queue B for packets P2 (with payload).
If queue A is more congested than queue B,
the ACK packet P1 could be sent on the wire after
P2.
A linux receiver when processing P1 (after P2) currently increments
LINUX_MIB_PAWSESTABREJECTED (TcpExtPAWSEstab)
and use TCP_RFC7323_PAWS drop reason.
It might also send a DUPACK if not rate limited.
In order to better understand this pattern, this
patch adds a new drop_reason : TCP_RFC7323_PAWS_ACK.
For old ACKS like these, we no longer increment
LINUX_MIB_PAWSESTABREJECTED and no longer sends a DUPACK,
keeping credit for other more interesting DUPACK.
perf record -e skb:kfree_skb -a
perf script
...
swapper 0 [148] 27475.438637: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [208] 27475.438706: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [208] 27475.438908: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [148] 27475.439010: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [148] 27475.439214: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [208] 27475.439286: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
...
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250113135558.3180360-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains a small batch of Netfilter/IPVS updates
for net-next:
1) Remove unused genmask parameter in nf_tables_addchain()
2) Speed up reads from /proc/net/ip_vs_conn, from Florian Westphal.
3) Skip empty buckets in hashlimit to avoid atomic operations that results
in false positive reports by syzbot with lockdep enabled, patch from
Eric Dumazet.
4) Add conntrack event timestamps available via ctnetlink,
from Florian Westphal.
netfilter pull request 25-01-11
* tag 'nf-next-25-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: conntrack: add conntrack event timestamp
netfilter: xt_hashlimit: htable_selective_cleanup() optimization
ipvs: speed up reads from ip_vs_conn proc file
netfilter: nf_tables: remove the genmask parameter
====================
Link: https://patch.msgid.link/20250111230800.67349-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In order to save power, it can be desirable to change the
RX operating mode using OMI to reduce the bandwidth. As the
handshake must be done in the HTC+ field, it cannot be done
by mac80211 directly, so expose functions to the driver to
request and finalize the necessary updates.
Note that RX OMI really only changes what the peer (AP) will
transmit to us, but in order to use it to actually save some
power (by reducing the listen bandwidth) we also update rate
scaling and then the channel context's mindef accordingly.
The updates are split into two in order to sequence them
correctly, when reducing bandwidth first reduce the rate
scaling and thus TX, then send OMI, then reduce the listen
bandwidth (chandef); when increasing bandwidth this is the
other way around. This also requires tracking in different
variables which part is applicable already.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250101070249.2c1a1934bd73.I4e90fd503504e37f9eac5bdae62e3f07e7071275@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, the sequence goes like this (among others):
1. flush all stations (including the AP ones) -> this will tell the
drivers to remove the stations
2. notify the driver the vif is not associated.
Which means that in between 1 and 2, the state is that the vif is
associated, but there is no AP station, which makes no sense, and may be
problematic for some drivers (for example iwlwifi)
Change the sequence to:
1. flush the TDLS stations
2. move the AP station to IEEE80211_STA_NONE
3. notify the driver about the vif being unassociated
4. flush the AP station
In order to not break other drivers, add a vif flag to indicate whether
the driver wants to new sequence or not. If the flag is not set, then
things will be done in the old sequence.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241224192322.996ad1be6cb3.I7815d33415aa1d65c0120b54be7a15a45388f807@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit 86e25f40aa ("net: napi: Add napi_config") moved napi->napi_id
assignment to a later point in time (napi_hash_add_with_id). This breaks
__xdp_rxq_info_reg which copies napi_id at an earlier time and now
stores 0 napi_id. It also makes sk_mark_napi_id_once_xdp and
__sk_mark_napi_id_once useless because they now work against 0 napi_id.
Since sk_busy_loop requires valid napi_id to busy-poll on, there is no way
to busy-poll AF_XDP sockets anymore.
Bring back the ability to busy-poll on XSK by resolving socket's napi_id
at bind time. This relies on relatively recent netif_queue_set_napi,
but (assume) at this point most popular drivers should have been converted.
This also removes per-tx/rx cycles which used to check and/or set
the napi_id value.
Confirmed by running a busy-polling AF_XDP socket
(github.com/fomichev/xskrtt) on mlx5 and looking at BusyPollRxPackets
from /proc/net/netstat.
Fixes: 86e25f40aa ("net: napi: Add napi_config")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250109003436.2829560-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull vfs fixes from Christian Brauner:
"afs:
- Fix the maximum cell name length
- Fix merge preference rule failure condition
fuse:
- Fix fuse_get_user_pages() so it doesn't risk misleading the caller
to think pages have been allocated when they actually haven't
- Fix direct-io folio offset and length calculation
netfs:
- Fix async direct-io handling
- Fix read-retry for filesystems that don't provide a
->prepare_read() method
vfs:
- Prevent truncating 64-bit offsets to 32-bits in iomap
- Fix memory barrier interactions when polling
- Remove MNT_ONRB to fix concurrent modification of @mnt->mnt_flags
leading to MNT_ONRB to not be raised and invalid access to a list
member"
* tag 'vfs-6.13-rc7.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
poll: kill poll_does_not_wait()
sock_poll_wait: kill the no longer necessary barrier after poll_wait()
io_uring_poll: kill the no longer necessary barrier after poll_wait()
poll_wait: kill the obsolete wait_address check
poll_wait: add mb() to fix theoretical race between waitqueue_active() and .poll()
afs: Fix merge preference rule failure condition
netfs: Fix read-retry for fs with no ->prepare_read()
netfs: Fix kernel async DIO
fs: kill MNT_ONRB
iomap: avoid avoid truncating 64-bit offset to 32 bits
afs: Fix the maximum cell name length
fuse: Set *nbytesp=0 in fuse_get_user_pages on allocation failure
fuse: fix direct io folio offset and length calculation
Now that poll_wait() provides a full barrier we can remove smp_mb() from
sock_poll_wait().
Also, the poll_does_not_wait() check before poll_wait() just adds the
unnecessary confusion, kill it. poll_wait() does the same "p && p->_qproc"
check.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250107162736.GA18944@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Steffen Klassert says:
====================
ipsec-next-2025-01-09
1) Implement the AGGFRAG protocol and basic IP-TFS (RFC9347) functionality.
From Christian Hopps.
2) Support ESN context update to hardware for TX.
From Jianbo Liu.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Nadia Pinaeva writes:
I am working on a tool that allows collecting network performance
metrics by using conntrack events.
Start time of a conntrack entry is used to evaluate seen_reply
latency, therefore the sooner it is timestamped, the better the
precision is.
In particular, when using this tool to compare the performance of the
same feature implemented using iptables/nftables/OVS it is crucial
to have the entry timestamped earlier to see any difference.
At this time, conntrack events can only get timestamped at recv time in
userspace, so there can be some delay between the event being generated
and the userspace process consuming the message.
There is sys/net/netfilter/nf_conntrack_timestamp, which adds a
64bit timestamp (ns resolution) that records start and stop times,
but its not suited for this either, start time is the 'hashtable insertion
time', not 'conntrack allocation time'.
There is concern that moving the start-time moment to conntrack
allocation will add overhead in case of flooding, where conntrack
entries are allocated and released right away without getting inserted
into the hashtable.
Also, even if this was changed it would not with events other than
new (start time) and destroy (stop time).
Pablo suggested to add new CTA_TIMESTAMP_EVENT, this adds this feature.
The timestamp is recorded in case both events are requested and the
sys/net/netfilter/nf_conntrack_timestamp toggle is enabled.
Reported-by: Nadia Pinaeva <n.m.pinaeva@gmail.com>
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This change introduces a mechanism for notifying userspace
applications about changes to IPv6 anycast addresses via netlink. It
includes:
* Addition and deletion of IPv6 anycast addresses are reported using
RTM_NEWANYCAST and RTM_DELANYCAST.
* A new netlink group (RTNLGRP_IPV6_ACADDR) for subscribing to these
notifications.
This enables user space applications(e.g. ip monitor) to efficiently
track anycast addresses through netlink messages, improving metrics
collection and system monitoring. It also unlocks the potential for
advanced anycast management in user space, such as hardware offload
control and fine grained network control.
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Yuyang Huang <yuyanghuang@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250107114355.1766086-1-yuyanghuang@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireles and netfilter.
Nothing major here. Over the last two weeks we gathered only around
two-thirds of our normal weekly fix count, but delaying sending these
until -rc7 seemed like a really bad idea.
AFAIK we have no bugs under investigation. One or two reverts for
stuff for which we haven't gotten a proper fix will likely come in the
next PR.
Current release - fix to a fix:
- netfilter: nft_set_hash: unaligned atomic read on struct
nft_set_ext
- eth: gve: trigger RX NAPI instead of TX NAPI in gve_xsk_wakeup
Previous releases - regressions:
- net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets
- mptcp:
- fix sleeping rcvmsg sleeping forever after bad recvbuffer adjust
- fix TCP options overflow
- prevent excessive coalescing on receive, fix throughput
- net: fix memory leak in tcp_conn_request() if map insertion fails
- wifi: cw1200: fix potential NULL dereference after conversion to
GPIO descriptors
- phy: micrel: dynamically control external clock of KSZ PHY, fix
suspend behavior
Previous releases - always broken:
- af_packet: fix VLAN handling with MSG_PEEK
- net: restrict SO_REUSEPORT to inet sockets
- netdev-genl: avoid empty messages in NAPI get
- dsa: microchip: fix set_ageing_time function on KSZ9477 and LAN937X
- eth:
- gve: XDP fixes around transmit, queue wakeup etc.
- ti: icssg-prueth: fix firmware load sequence to prevent time
jump which breaks timesync related operations
Misc:
- netlink: specs: mptcp: add missing attr and improve documentation"
* tag 'net-6.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
net: ti: icssg-prueth: Fix clearing of IEP_CMP_CFG registers during iep_init
net: ti: icssg-prueth: Fix firmware load sequence.
mptcp: prevent excessive coalescing on receive
mptcp: don't always assume copied data in mptcp_cleanup_rbuf()
mptcp: fix recvbuffer adjust on sleeping rcvmsg
ila: serialize calls to nf_register_net_hooks()
af_packet: fix vlan_get_protocol_dgram() vs MSG_PEEK
af_packet: fix vlan_get_tci() vs MSG_PEEK
net: wwan: iosm: Properly check for valid exec stage in ipc_mmio_init()
net: restrict SO_REUSEPORT to inet sockets
net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets
net: sfc: Correct key_len for efx_tc_ct_zone_ht_params
net: wwan: t7xx: Fix FSM command timeout issue
sky2: Add device ID 11ab:4373 for Marvell 88E8075
mptcp: fix TCP options overflow.
net: mv643xx_eth: fix an OF node reference leak
gve: trigger RX NAPI instead of TX NAPI in gve_xsk_wakeup
eth: bcmsysport: fix call balance of priv->clk handling routines
net: llc: reset skb->transport_header
netlink: specs: mptcp: fix missing doc
...
The bridge input code may drop frames for various reasons and at various
points in the ingress handling logic. Currently kfree_skb() is used
everywhere, and therefore no drop reason is specified. Add drop reasons
to the most common drop points.
Drop reasons are not added exhaustively to the entire bridge code. The
intention is to incrementally add drop reasons to the rest of the bridge
code in follow up patches.
Signed-off-by: Radu Rendec <rrendec@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241219163606.717758-3-rrendec@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The SKB_DROP_REASON_VXLAN_NO_REMOTE skb drop reason was introduced in
the specific context of vxlan. As it turns out, there are similar cases
when a packet needs to be dropped in other parts of the network stack,
such as the bridge module.
Rename SKB_DROP_REASON_VXLAN_NO_REMOTE and give it a more generic name,
so that it can be used in other parts of the network stack. This is not
a functional change, and the numeric value of the drop reason even
remains unchanged.
Signed-off-by: Radu Rendec <rrendec@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241219163606.717758-2-rrendec@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IPv4 code commonly has to initialise a flowi4 structure from an IPv4
socket. This requires looking at potential IPv4 options to set the
proper destination address, call flowi4_init_output() with the correct
set of parameters and run the sk_classify_flow security hook.
Instead of reimplementing these operations in different parts of the
stack, let's define inet_sk_init_flowi4() which does all these
operations.
The first user is inet_sk_rebuild_header(), where inet_sk_init_flowi4()
replaces ip_route_output_ports(). Unlike ip_route_output_ports(), which
sets the flowi4 structure and performs the route lookup in one go,
inet_sk_init_flowi4() only initialises the flow. The route lookup is
then done by ip_route_output_flow(). Decoupling flow initialisation
from route lookup makes this new interface applicable more broadly as
it will allow some users to overwrite specific struct flowi4 members
before the route lookup.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/fd416275262b1f518d5abfcef740ce4f4a1a6522.1734357769.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Same as with converting &xdp_buff to skb on Rx, the code which allocates
a new skb and copies the XSk frame there is identical across the
drivers, so make it generic. This includes copying all the frags if they
are present in the original buff.
System percpu page_pools greatly improve XDP_PASS performance on XSk:
instead of page_alloc() + page_free(), the net core recycles the same
pages, so the only overhead left is memcpy()s. When the Page Pool is
not compiled in, the whole function is a return-NULL (but it always
gets selected when eBPF is enabled).
Note that the passed buff gets freed if the conversion is done w/o any
error, assuming you don't need this buffer after you convert it to an
skb.
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241218174435.1445282-6-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, xsk_buff_add_frag() only adds the frag to pool's linked list,
not doing anything with the &xdp_buff. The drivers do that manually and
the logic is the same.
Make it really add an skb frag, just like xdp_buff_add_frag() does that,
and freeing frags on error if needed. This allows to remove repeating
code from i40e and ice and not add the same code again and again.
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241218174435.1445282-5-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The code which builds an skb from an &xdp_buff keeps multiplying itself
around the drivers with almost no changes. Let's try to stop that by
adding a generic function.
Unlike __xdp_build_skb_from_frame(), always allocate an skbuff head
using napi_build_skb() and make use of the available xdp_rxq pointer to
assign the Rx queue index. In case of PP-backed buffer, mark the skb to
be recycled, as every PP user's been switched to recycle skbs.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241218174435.1445282-4-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
