When SAE commit is sent and received in response, there's no
ordering for the SAE confirm messages. As such, don't call
drivers to stop listening on the channel when the confirm
message is still expected.
This fixes an issue if the local confirm is transmitted later
than the AP's confirm, for iwlwifi (and possibly mt76) the
AP's confirm would then get lost since the device isn't on
the channel at the time the AP transmit the confirm.
For iwlwifi at least, this also improves the overall timing
of the authentication handshake (by about 15ms according to
the report), likely since the session protection won't be
aborted and rescheduled.
Note that even before this, mgd_complete_tx() wasn't always
called for each call to mgd_prepare_tx() (e.g. in the case
of WEP key shared authentication), and the current drivers
that have the complete callback don't seem to mind. Document
this as well though.
Reported-by: Jan Hendrik Farr <kernel@jfarr.cc>
Closes: https://lore.kernel.org/all/aB30Ea2kRG24LINR@archlinux/
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250609213232.12691580e140.I3f1d3127acabcd58348a110ab11044213cf147d3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Implement dot11ExtendedRegInfoSupport to advertise non-AP station
regulatory power capability as part of regulatory connectivity
element in (Re)Association request frames so that AP can achieve
maximum client connectivity. Control field which was interpreted
using value of 3-bits B5 to B3, now uses value of 4-bits B6 to B3 to
interpret the type of AP. Hence update IEEE80211_HE_6GHZ_OPER_CTRL_REG_INFO
to parse 4-bits control field. If older AP still updates only 3-bits
value of control field, station can still interpret the value as per
section E.2.7 of IEEE 802.11 REVme D7.0 and support the appropriate
AP type.
Also update IEEE80211_6GHZ_CTRL_REG_INDOOR_SP_AP as the value of
standard power AP is changed to 8 instead of 4 so that AP can support both
LPI AP and SP AP to maximize the connectivity with stations. For backward
compatibility, keeping value 4 as old AP by limiting it to SP AP only.
Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250609213232.90cdef116aad.I85da390fbee59355e3855691933e6a5e55c47ac4@changeid
[fix kernel-doc]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we get to the error path of ieee80211_prep_connection, for example
because of a FW issue, then ieee80211_vif_set_links is called
with 0.
But the call to drv_change_vif_links from ieee80211_vif_update_links
will probably fail as well, for the same reason.
In this case, the valid_links and active_links bitmaps will be reverted
to the value of the failing connection.
Then, in the next connection, due to the logic of
ieee80211_set_vif_links_bitmaps, valid_links will be set to the ID of
the new connection assoc link, but the active_links will remain with the
ID of the old connection's assoc link.
If those IDs are different, we get into a weird state of valid_links and
active_links being different. One of the consequences of this state is
to call drv_change_vif_links with new_links as 0, since the & operation
between the bitmaps will be 0.
Since a removal of a link should always succeed, ignore the return value
of drv_change_vif_links if it was called to only remove links, which is
the case for the ieee80211_prep_connection's error path.
That way, the bitmaps will not be reverted to have the value from the
failing connection and will have 0, so the next connection will have a
good state.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250609213231.ba2011fb435f.Id87ff6dab5e1cf757b54094ac2d714c656165059@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, ieee80211_rx_data_set_sta() does not correctly handle the
case where the interface supports multiple links (MLO), but the station
does not (non-MLO). This can lead to incorrect link assignment or
unexpected warnings when accessing link information.
Hence, add a fix to check if the station lacks valid link support and
use its default link ID for rx->link assignment. If the station
unexpectedly has valid links, fall back to the default link.
This ensures correct link association and prevents potential issues
in mixed MLO/non-MLO environments.
Signed-off-by: Hari Chandrakanthan <quic_haric@quicinc.com>
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250630084119.3583593-1-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Pull networking fixes from Paolo Abeni:
"Including fixes from Bluetooth.
Current release - new code bugs:
- eth:
- txgbe: fix the issue of TX failure
- ngbe: specify IRQ vector when the number of VFs is 7
Previous releases - regressions:
- sched: always pass notifications when child class becomes empty
- ipv4: fix stat increase when udp early demux drops the packet
- bluetooth: prevent unintended pause by checking if advertising is active
- virtio: fix error reporting in virtqueue_resize
- eth:
- virtio-net:
- ensure the received length does not exceed allocated size
- fix the xsk frame's length check
- lan78xx: fix WARN in __netif_napi_del_locked on disconnect
Previous releases - always broken:
- bluetooth: mesh: check instances prior disabling advertising
- eth:
- idpf: convert control queue mutex to a spinlock
- dpaa2: fix xdp_rxq_info leak
- amd-xgbe: align CL37 AN sequence as per databook"
* tag 'net-6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
vsock/vmci: Clear the vmci transport packet properly when initializing it
dt-bindings: net: sophgo,sg2044-dwmac: Drop status from the example
net: ngbe: specify IRQ vector when the number of VFs is 7
net: wangxun: revert the adjustment of the IRQ vector sequence
net: txgbe: request MISC IRQ in ndo_open
virtio_net: Enforce minimum TX ring size for reliability
virtio_net: Cleanup '2+MAX_SKB_FRAGS'
virtio_ring: Fix error reporting in virtqueue_resize
virtio-net: xsk: rx: fix the frame's length check
virtio-net: use the check_mergeable_len helper
virtio-net: remove redundant truesize check with PAGE_SIZE
virtio-net: ensure the received length does not exceed allocated size
net: ipv4: fix stat increase when udp early demux drops the packet
net: libwx: fix the incorrect display of the queue number
amd-xgbe: do not double read link status
net/sched: Always pass notifications when child class becomes empty
nui: Fix dma_mapping_error() check
rose: fix dangling neighbour pointers in rose_rt_device_down()
enic: fix incorrect MTU comparison in enic_change_mtu()
amd-xgbe: align CL37 AN sequence as per databook
...
Introduce support for specifying relative bandwidth shares between
traffic classes (TC) in the devlink-rate API. This new option allows
users to allocate bandwidth across multiple traffic classes in a
single command.
This feature provides a more granular control over traffic management,
especially for scenarios requiring Enhanced Transmission Selection.
Users can now define a relative bandwidth share for each traffic class.
For example, assigning share values of 20 to TC0 (TCP/UDP) and 80 to TC5
(RoCE) will result in TC0 receiving 20% and TC5 receiving 80% of the
total bandwidth. The actual percentage each class receives depends on
the ratio of its share value to the sum of all shares.
Example:
DEV=pci/0000:08:00.0
$ devlink port function rate add $DEV/vfs_group tx_share 10Gbit \
tx_max 50Gbit tc-bw 0:20 1:0 2:0 3:0 4:0 5:80 6:0 7:0
$ devlink port function rate set $DEV/vfs_group \
tc-bw 0:20 1:0 2:0 3:0 4:0 5:20 6:60 7:0
Example usage with ynl:
./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml \
--do rate-set --json '{
"bus-name": "pci",
"dev-name": "0000:08:00.0",
"port-index": 1,
"rate-tc-bws": [
{"rate-tc-index": 0, "rate-tc-bw": 50},
{"rate-tc-index": 1, "rate-tc-bw": 50},
{"rate-tc-index": 2, "rate-tc-bw": 0},
{"rate-tc-index": 3, "rate-tc-bw": 0},
{"rate-tc-index": 4, "rate-tc-bw": 0},
{"rate-tc-index": 5, "rate-tc-bw": 0},
{"rate-tc-index": 6, "rate-tc-bw": 0},
{"rate-tc-index": 7, "rate-tc-bw": 0}
]
}'
./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml \
--do rate-get --json '{
"bus-name": "pci",
"dev-name": "0000:08:00.0",
"port-index": 1
}'
output for rate-get:
{'bus-name': 'pci',
'dev-name': '0000:08:00.0',
'port-index': 1,
'rate-tc-bws': [{'rate-tc-bw': 50, 'rate-tc-index': 0},
{'rate-tc-bw': 50, 'rate-tc-index': 1},
{'rate-tc-bw': 0, 'rate-tc-index': 2},
{'rate-tc-bw': 0, 'rate-tc-index': 3},
{'rate-tc-bw': 0, 'rate-tc-index': 4},
{'rate-tc-bw': 0, 'rate-tc-index': 5},
{'rate-tc-bw': 0, 'rate-tc-index': 6},
{'rate-tc-bw': 0, 'rate-tc-index': 7}],
'rate-tx-max': 0,
'rate-tx-priority': 0,
'rate-tx-share': 0,
'rate-tx-weight': 0,
'rate-type': 'leaf'}
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250629142138.361537-3-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MSG_ZEROCOPY data must be copied before data is queued to local
sockets, to avoid indefinite timeout until memory release.
This test is performed by skb_orphan_frags_rx, which is called when
looping an egress skb to packet sockets, error queue or ingress path.
To preserve zerocopy for skbs that are looped to ingress but are then
forwarded to an egress device rather than delivered locally, defer
this last check until an skb enters the local IP receive path.
This is analogous to existing behavior of skb_clear_delivery_time.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250630194312.1571410-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
udp_v4_early_demux now returns drop reasons as it either returns 0 or
ip_mc_validate_source, which returns itself a drop reason. However its
use was not converted in ip_rcv_finish_core and the drop reason is
ignored, leading to potentially skipping increasing LINUX_MIB_IPRPFILTER
if the drop reason is SKB_DROP_REASON_IP_RPFILTER.
This is a fix and we're not converting udp_v4_early_demux to explicitly
return a drop reason to ease backports; this can be done as a follow-up.
Fixes: d46f827016 ("net: ip: make ip_mc_validate_source() return drop reason")
Cc: Menglong Dong <menglong8.dong@gmail.com>
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250701074935.144134-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Certain classful qdiscs may invoke their classes' dequeue handler on an
enqueue operation. This may unexpectedly empty the child qdisc and thus
make an in-flight class passive via qlen_notify(). Most qdiscs do not
expect such behaviour at this point in time and may re-activate the
class eventually anyways which will lead to a use-after-free.
The referenced fix commit attempted to fix this behavior for the HFSC
case by moving the backlog accounting around, though this turned out to
be incomplete since the parent's parent may run into the issue too.
The following reproducer demonstrates this use-after-free:
tc qdisc add dev lo root handle 1: drr
tc filter add dev lo parent 1: basic classid 1:1
tc class add dev lo parent 1: classid 1:1 drr
tc qdisc add dev lo parent 1:1 handle 2: hfsc def 1
tc class add dev lo parent 2: classid 2:1 hfsc rt m1 8 d 1 m2 0
tc qdisc add dev lo parent 2:1 handle 3: netem
tc qdisc add dev lo parent 3:1 handle 4: blackhole
echo 1 | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888
tc class delete dev lo classid 1:1
echo 1 | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888
Since backlog accounting issues leading to a use-after-frees on stale
class pointers is a recurring pattern at this point, this patch takes
a different approach. Instead of trying to fix the accounting, the patch
ensures that qdisc_tree_reduce_backlog always calls qlen_notify when
the child qdisc is empty. This solves the problem because deletion of
qdiscs always involves a call to qdisc_reset() and / or
qdisc_purge_queue() which ultimately resets its qlen to 0 thus causing
the following qdisc_tree_reduce_backlog() to report to the parent. Note
that this may call qlen_notify on passive classes multiple times. This
is not a problem after the recent patch series that made all the
classful qdiscs qlen_notify() handlers idempotent.
Fixes: 3f98113810 ("sch_hfsc: Fix qlen accounting bug when using peek in hfsc_enqueue()")
Signed-off-by: Lion Ackermann <nnamrec@gmail.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/d912cbd7-193b-4269-9857-525bee8bbb6a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dst->dev is read locklessly in many contexts,
and written in dst_dev_put().
Fixing all the races is going to need many changes.
We probably will have to add full RCU protection.
Add three helpers to ease this painful process.
static inline struct net_device *dst_dev(const struct dst_entry *dst)
{
return READ_ONCE(dst->dev);
}
static inline struct net_device *skb_dst_dev(const struct sk_buff *skb)
{
return dst_dev(skb_dst(skb));
}
static inline struct net *skb_dst_dev_net(const struct sk_buff *skb)
{
return dev_net(skb_dst_dev(skb));
}
static inline struct net *skb_dst_dev_net_rcu(const struct sk_buff *skb)
{
return dev_net_rcu(skb_dst_dev(skb));
}
Fixes: 4a6ce2b6f2 ("net: introduce a new function dst_dev_put()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dst_dev_put() can overwrite dst->output while other
cpus might read this field (for instance from dst_output())
Add READ_ONCE()/WRITE_ONCE() annotations to suppress
potential issues.
We will likely need RCU protection in the future.
Fixes: 4a6ce2b6f2 ("net: introduce a new function dst_dev_put()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
____cacheline_aligned_in_smp attribute only makes sure to align
a field to a cache line. It does not prevent the linker to use
the remaining of the cache line for other variables, causing
potential false sharing.
Move tcp_memory_allocated into a dedicated cache line.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250630093540.3052835-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are two bugs in rose_rt_device_down() that can cause
use-after-free:
1. The loop bound `t->count` is modified within the loop, which can
cause the loop to terminate early and miss some entries.
2. When removing an entry from the neighbour array, the subsequent entries
are moved up to fill the gap, but the loop index `i` is still
incremented, causing the next entry to be skipped.
For example, if a node has three neighbours (A, A, B) with count=3 and A
is being removed, the second A is not checked.
i=0: (A, A, B) -> (A, B) with count=2
^ checked
i=1: (A, B) -> (A, B) with count=2
^ checked (B, not A!)
i=2: (doesn't occur because i < count is false)
This leaves the second A in the array with count=2, but the rose_neigh
structure has been freed. Code that accesses these entries assumes that
the first `count` entries are valid pointers, causing a use-after-free
when it accesses the dangling pointer.
Fix both issues by iterating over the array in reverse order with a fixed
loop bound. This ensures that all entries are examined and that the removal
of an entry doesn't affect subsequent iterations.
Reported-by: syzbot+e04e2c007ba2c80476cb@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e04e2c007ba2c80476cb
Tested-by: syzbot+e04e2c007ba2c80476cb@syzkaller.appspotmail.com
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250629030833.6680-1-enjuk@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido spotted that I made a mistake in commit under Fixes,
ethnl_default_parse() may acquire a dev reference even when it returns
an error. This may have been driven by the code structure in dumps
(which unconditionally release dev before handling errors), but it's
too much of a trap. Functions should undo what they did before returning
an error, rather than expecting caller to clean up.
Rather than fixing ethnl_default_set_doit() directly make
ethnl_default_parse() clean up errors.
Reported-by: Ido Schimmel <idosch@idosch.org>
Link: https://lore.kernel.org/aGEPszpq9eojNF4Y@shredder
Fixes: 963781bdfe ("net: ethtool: call .parse_request for SET handlers")
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250630154053.1074664-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull NFS client fixes from Anna Schumaker:
- Fix loop in GSS sequence number cache
- Clean up /proc/net/rpc/nfs if nfs_fs_proc_net_init() fails
- Fix a race to wake on NFS_LAYOUT_DRAIN
- Fix handling of NFS level errors in I/O
* tag 'nfs-for-6.16-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFSv4/flexfiles: Fix handling of NFS level errors in I/O
NFSv4/pNFS: Fix a race to wake on NFS_LAYOUT_DRAIN
nfs: Clean up /proc/net/rpc/nfs when nfs_fs_proc_net_init() fails.
sunrpc: fix loop in gss seqno cache
tl;dr
=====
Add a new neighbor flag ("extern_valid") that can be used to indicate to
the kernel that a neighbor entry was learned and determined to be valid
externally. The kernel will not try to remove or invalidate such an
entry, leaving these decisions to the user space control plane. This is
needed for EVPN multi-homing where a neighbor entry for a multi-homed
host needs to be synced across all the VTEPs among which the host is
multi-homed.
Background
==========
In a typical EVPN multi-homing setup each host is multi-homed using a
set of links called ES (Ethernet Segment, i.e., LAG) to multiple leaf
switches (VTEPs). VTEPs that are connected to the same ES are called ES
peers.
When a neighbor entry is learned on a VTEP, it is distributed to both ES
peers and remote VTEPs using EVPN MAC/IP advertisement routes. ES peers
use the neighbor entry when routing traffic towards the multi-homed host
and remote VTEPs use it for ARP/NS suppression.
Motivation
==========
If the ES link between a host and the VTEP on which the neighbor entry
was locally learned goes down, the EVPN MAC/IP advertisement route will
be withdrawn and the neighbor entries will be removed from both ES peers
and remote VTEPs. Routing towards the multi-homed host and ARP/NS
suppression can fail until another ES peer locally learns the neighbor
entry and distributes it via an EVPN MAC/IP advertisement route.
"draft-rbickhart-evpn-ip-mac-proxy-adv-03" [1] suggests avoiding these
intermittent failures by having the ES peers install the neighbor
entries as before, but also injecting EVPN MAC/IP advertisement routes
with a proxy indication. When the previously mentioned ES link goes down
and the original EVPN MAC/IP advertisement route is withdrawn, the ES
peers will not withdraw their neighbor entries, but instead start aging
timers for the proxy indication.
If an ES peer locally learns the neighbor entry (i.e., it becomes
"reachable"), it will restart its aging timer for the entry and emit an
EVPN MAC/IP advertisement route without a proxy indication. An ES peer
will stop its aging timer for the proxy indication if it observes the
removal of the proxy indication from at least one of the ES peers
advertising the entry.
In the event that the aging timer for the proxy indication expired, an
ES peer will withdraw its EVPN MAC/IP advertisement route. If the timer
expired on all ES peers and they all withdrew their proxy
advertisements, the neighbor entry will be completely removed from the
EVPN fabric.
Implementation
==============
In the above scheme, when the control plane (e.g., FRR) advertises a
neighbor entry with a proxy indication, it expects the corresponding
entry in the data plane (i.e., the kernel) to remain valid and not be
removed due to garbage collection or loss of carrier. The control plane
also expects the kernel to notify it if the entry was learned locally
(i.e., became "reachable") so that it will remove the proxy indication
from the EVPN MAC/IP advertisement route. That is why these entries
cannot be programmed with dummy states such as "permanent" or "noarp".
Instead, add a new neighbor flag ("extern_valid") which indicates that
the entry was learned and determined to be valid externally and should
not be removed or invalidated by the kernel. The kernel can probe the
entry and notify user space when it becomes "reachable" (it is initially
installed as "stale"). However, if the kernel does not receive a
confirmation, have it return the entry to the "stale" state instead of
the "failed" state.
In other words, an entry marked with the "extern_valid" flag behaves
like any other dynamically learned entry other than the fact that the
kernel cannot remove or invalidate it.
One can argue that the "extern_valid" flag should not prevent garbage
collection and that instead a neighbor entry should be programmed with
both the "extern_valid" and "extern_learn" flags. There are two reasons
for not doing that:
1. Unclear why a control plane would like to program an entry that the
kernel cannot invalidate but can completely remove.
2. The "extern_learn" flag is used by FRR for neighbor entries learned
on remote VTEPs (for ARP/NS suppression) whereas here we are
concerned with local entries. This distinction is currently irrelevant
for the kernel, but might be relevant in the future.
Given that the flag only makes sense when the neighbor has a valid
state, reject attempts to add a neighbor with an invalid state and with
this flag set. For example:
# ip neigh add 192.0.2.1 nud none dev br0.10 extern_valid
Error: Cannot create externally validated neighbor with an invalid state.
# ip neigh add 192.0.2.1 lladdr 00:11:22:33:44:55 nud stale dev br0.10 extern_valid
# ip neigh replace 192.0.2.1 nud failed dev br0.10 extern_valid
Error: Cannot mark neighbor as externally validated with an invalid state.
The above means that a neighbor cannot be created with the
"extern_valid" flag and flags such as "use" or "managed" as they result
in a neighbor being created with an invalid state ("none") and
immediately getting probed:
# ip neigh add 192.0.2.1 lladdr 00:11:22:33:44:55 nud stale dev br0.10 extern_valid use
Error: Cannot create externally validated neighbor with an invalid state.
However, these flags can be used together with "extern_valid" after the
neighbor was created with a valid state:
# ip neigh add 192.0.2.1 lladdr 00:11:22:33:44:55 nud stale dev br0.10 extern_valid
# ip neigh replace 192.0.2.1 lladdr 00:11:22:33:44:55 nud stale dev br0.10 extern_valid use
One consequence of preventing the kernel from invalidating a neighbor
entry is that by default it will only try to determine reachability
using unicast probes. This can be changed using the "mcast_resolicit"
sysctl:
# sysctl net.ipv4.neigh.br0/10.mcast_resolicit
0
# tcpdump -nn -e -i br0.10 -Q out arp &
# ip neigh replace 192.0.2.1 lladdr 00:11:22:33:44:55 nud stale dev br0.10 extern_valid use
62:50:1d:11:93:6f > 00:11:22:33:44:55, ethertype ARP (0x0806), length 42: Request who-has 192.0.2.1 tell 192.0.2.2, length 28
62:50:1d:11:93:6f > 00:11:22:33:44:55, ethertype ARP (0x0806), length 42: Request who-has 192.0.2.1 tell 192.0.2.2, length 28
62:50:1d:11:93:6f > 00:11:22:33:44:55, ethertype ARP (0x0806), length 42: Request who-has 192.0.2.1 tell 192.0.2.2, length 28
# sysctl -wq net.ipv4.neigh.br0/10.mcast_resolicit=3
# ip neigh replace 192.0.2.1 lladdr 00:11:22:33:44:55 nud stale dev br0.10 extern_valid use
62:50:1d:11:93:6f > 00:11:22:33:44:55, ethertype ARP (0x0806), length 42: Request who-has 192.0.2.1 tell 192.0.2.2, length 28
62:50:1d:11:93:6f > 00:11:22:33:44:55, ethertype ARP (0x0806), length 42: Request who-has 192.0.2.1 tell 192.0.2.2, length 28
62:50:1d:11:93:6f > 00:11:22:33:44:55, ethertype ARP (0x0806), length 42: Request who-has 192.0.2.1 tell 192.0.2.2, length 28
62:50:1d:11:93:6f > ff:ff:ff:ff:ff:ff, ethertype ARP (0x0806), length 42: Request who-has 192.0.2.1 tell 192.0.2.2, length 28
62:50:1d:11:93:6f > ff:ff:ff:ff:ff:ff, ethertype ARP (0x0806), length 42: Request who-has 192.0.2.1 tell 192.0.2.2, length 28
62:50:1d:11:93:6f > ff:ff:ff:ff:ff:ff, ethertype ARP (0x0806), length 42: Request who-has 192.0.2.1 tell 192.0.2.2, length 28
iproute2 patches can be found here [2].
[1] https://datatracker.ietf.org/doc/html/draft-rbickhart-evpn-ip-mac-proxy-adv-03
[2] https://github.com/idosch/iproute2/tree/submit/extern_valid_v1
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20250626073111.244534-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We already call get_rxfh under the rss_lock when we read back
context state after changes. Let's be consistent and always
hold the lock. The existing callers are all under rtnl_lock
so this should make no difference in practice, but it makes
the locking rules far less confusing IMHO. Any RSS callback
and any access to the RSS XArray should hold the lock.
Link: https://patch.msgid.link/20250626202848.104457-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Netlink code will want to perform the RSS_SET operation atomically
under the rss_lock. sfc wants to hold the rss_lock in rxfh_fields_get,
which makes that difficult. Lets move the locking up to the core
so that for all driver-facing callbacks rss_lock is taken consistently
by the core.
Link: https://patch.msgid.link/20250626202848.104457-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
