On some i.MX platforms, certain I2C client drivers keep a periodic
workqueue which continues to trigger I2C transfers.
During system suspend/resume, there exists a time window between:
- suspend_noirq and the system entering suspend
- the system starting to resume and resume_noirq
In this window, the I2C controller resources such as clock and pinctrl
may already be disabled or not yet restored.
If a workqueue triggers an I2C transfer in this period, the driver
attempts to access I2C registers while the hardware resources are
unavailable, which may lead to system hang.
Mark the I2C adapter as suspended during noirq suspend and block new
transfers until resume, ensuring that I2C transfers are only issued
when hardware resources are available.
Fixes: 358025ac09 ("i2c: imx: make controller available until system suspend_noirq() and from resume_noirq()")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Cc: <stable@vger.kernel.org> # v6.14+
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260525030400.3182911-1-carlos.song@oss.nxp.com
enable_trace_fprobe() sets the file link or the TP_FLAG_PROFILE flag and
then registers each trace_fprobe in the probe list. If
__register_trace_fprobe() fails partway through, the function returns
immediately without unregistering the trace_fprobes it already registered
or undoing the file link / flag it set, leaving the event half-enabled and
leaking the registered fprobe(s).
enable_trace_kprobe() already handles this with a rollback path. Do the
same for fprobe: on failure, unregister all probes and clear the file link
or profile flag.
Link: https://lore.kernel.org/all/20260724064208.480030-1-raushan.jhon@gmail.com/
Fixes: 334e5519c3 ("tracing/probes: Add fprobe events for tracing function entry and exit.")
Cc: stable@vger.kernel.org
Signed-off-by: Raushan Patel <raushan.jhon@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Pull btrfs fixes from David Sterba:
"Zoned mode:
- fix assertion and handle case of finished zone and truncated extent
- fix zone metadata write pointer on actual zone reset
- fix deadlock caused metadata writeback and transaction commit
- fix return value reuse leading to confusion about chunk
reservations
raid56 scrub:
- fix tracking of sector checksums when there are not checksums found
- fix inverted logic when submitting parity read bio
mount/remount fixes:
- fix leaking 'remount in progress' state which can break other
operations to work (qgroup rescan, autodefrag, reclaim)
- adjust using global block reserve after read-only mount when using
rescue= option
- handle missing raid stripe tree when mounted with 'ignorebadroots'
Misc:
- fix -Wmaybe-uninitialized warning in GET_CSUMS ioctl"
* tag 'for-7.2-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: raid56: fix scrub read assembly submitting no reads
btrfs: zoned: skip fully truncated ordered extents at zone finish
btrfs: initialize 'args' to avoid compiler warning in btrfs_ioctl_get_csums()
btrfs: zoned: fix missing chunk metadata reservation
btrfs: raid56: fix an incorrect csum skip during scrub
btrfs: report missing raid stripe tree root during lookup
btrfs: skip global block reserve accounting for rescue mounts
btrfs: zoned: reset meta_write_pointer on zone reset
btrfs: zoned: fix deadlock between metadata writeback and transaction commit
btrfs: fix leaking BTRFS_FS_STATE_REMOUNTING flag
traceprobe_expand_meta_args() parses $argN with simple_strtoul() and
calls sprint_nth_btf_arg(n - 1, ...). For $arg0, n is 0 so the index is
-1. Because ctx->nr_params is signed, the "idx >= nr_params" guard in
sprint_nth_btf_arg() does not catch the negative index, and
ctx->params[-1].name_off is read out of bounds.
The normal per-argument path (parse_probe_vars()) already rejects
$arg0 via its argument-number check, but meta-argument expansion runs
before per-argument parsing and substitutes the value first, bypassing
that check.
Reject $arg0 explicitly during expansion.
Link: https://lore.kernel.org/all/20260724054435.146279-1-raushan.jhon@gmail.com/
Fixes: 18b1e870a4 ("tracing/probes: Add $arg* meta argument for all function args")
Cc: stable@vger.kernel.org
Signed-off-by: Raushan Patel <raushan.jhon@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
bm_get_tree() takes a reference to the user namespace and hands it to
get_tree_keyed() as the sget key. sget_fc() moves that reference into
sb->s_fs_info and clears fc->s_fs_info, so from that point on the
superblock owns it and bm_free() doesn't see it anymore.
The superblock drops it in ->put_super(). But generic_shutdown_super()
only calls ->put_super() from inside the if (sb->s_root) branch, so
nothing releases it when bm_fill_super() fails:
- The kzalloc_obj() failure leaves s_root NULL and the whole branch is
skipped.
- A simple_fill_super() failure in the file loop leaves s_root set, but
s_op still points at simple_super_operations, which has no
->put_super(). bm_fill_super() installs s_ops only once
simple_fill_super() returned success, and installing it earlier
wouldn't help either because simple_fill_super() overwrites s_op.
Either way vfs_get_super() calls deactivate_locked_super() and the
reference is gone for good. binfmt_misc mounts are available in a user
namespace and both the inode and the dentry cache are SLAB_ACCOUNT, so
an unprivileged caller under a tight memory cgroup can fail
simple_fill_super() on demand and leak one user namespace per attempt.
Drop the reference in ->kill_sb() instead, which runs unconditionally,
the same way nfsd and rpc_pipefs release their keyed s_fs_info.
That also stops ->put_super() from clearing s_fs_info while the
superblock is still on @fs_supers. generic_shutdown_super() leaves it
there on purpose so that sget_fc() keeps finding it until kill_sb() has
run, but a NULL s_fs_info makes test_keyed_super() miss it, so a
concurrent mount for the same user namespace skips the grab_super()
wait and creates a second superblock for a namespace that is still
being torn down.
Link: https://patch.msgid.link/20260728-work-binfmt_misc-usernsleak-v1-1-dbd8d5e626e7@kernel.org
Fixes: 21ca59b365 ("binfmt_misc: enable sandboxed mounts")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
The registration string starts with a user chosen delimiter that
separates the individual fields. So that the field parsers terminate
even on a truncated string create_entry() pads the buffer with that
same delimiter:
memset(buf + count, del, 8);
Most fields are scanned for the delimiter with strchr()/scanarg() and
happily stop on the padding. The flags field is different: instead of
scanning for the delimiter check_special_flags() consumes the flag
characters 'P', 'O', 'C' and 'F' and stops at the first byte that is
none of them, relying on the trailing delimiter to end the scan.
If the delimiter is itself a flag character the padding no longer acts
as a terminator. The scan swallows all eight padding bytes and keeps
reading past the end of the allocation until it hits a byte that is
not a flag character. For example registering
PaPEPPxPPiP
with 'P' as the delimiter (name "a", type extension, magic "x",
interpreter "i", empty flags) leaves the flag scan running off the end
of the buffer. The registration is rejected in the end because the
parser does not stop exactly at buf + count, but only after the out of
bounds read has already happened. With an unlucky allocation layout the
scan can walk into an unmapped page; under KASAN it is reported as a
slab out of bounds read. binfmt_misc mounts are available to
unprivileged users in a user namespace so the read is reachable without
privileges.
Reject a delimiter that is one of the flag characters up front. Such a
registration was always rejected anyway, only after the out of bounds
read, so no valid registration string changes meaning.
Link: https://patch.msgid.link/20260710-work-binfmt_misc-locking-v3-3-a162f7cb58d6@kernel.org
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
For MISC_FMT_OPEN_FILE entries load_misc_binary() clones the
registered interpreter file and denies write access to the clone via
plain deny_write_access(). The clone is installed as
bprm->interpreter and later released by the exec machinery through
exe_file_allow_write_access() which skips the i_writecount increment
for files with FMODE_FSNOTIFY_HSM set.
The deny and allow side can therefore come to different conclusions
when pre-content watches are in play: if a pre-content watch is added
to the interpreter after registration every subsequent exec through
that entry takes a write denial on the clone that is never paired
with a write allowance, driving the interpreter inode's i_writecount
further down with each exec and leaving the interpreter unwritable
even after the entry and all its users are gone.
Take the write denial via exe_file_deny_write_access() so both sides
of the pairing base their decision on the same file mode, and
propagate failure instead of silently ignoring it: an interpreter
that is concurrently open for writing now fails the exec with
ETXTBSY, exactly like an interpreter freshly opened via open_exec()
would.
Link: https://patch.msgid.link/20260710-work-binfmt_misc-locking-v3-2-a162f7cb58d6@kernel.org
Fixes: 0357ef03c9 ("fs: don't block write during exec on pre-content watched files")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Registering an entry with the MISC_FMT_OPEN_FILE flag opens the
interpreter via open_exec() which denies write access to it for as
long as the entry exists. Removing the entry closes the interpreter
file via filp_close() but never restores write access, leaving the
inode's i_writecount permanently negative. Opening the interpreter
for writing keeps failing with ETXTBSY long after the entry is gone
until the inode is evicted from the inode cache.
Commit 90f601b497 ("binfmt_misc: restore write access before
closing files opened by open_exec()") fixed the same imbalance in the
error path of bm_register_write() but the actual removal path has
been leaking the write denial since the introduction of the flag.
Restore write access in put_binfmt_handler() before closing the
interpreter file.
Link: https://patch.msgid.link/20260710-work-binfmt_misc-locking-v3-1-a162f7cb58d6@kernel.org
Fixes: 948b701a60 ("binfmt_misc: add persistent opened binary handler for containers")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Christian Brauner <brauner@kernel.org> says:
An entry registered with 'F' opens its interpreter at registration time
and holds that file until the entry is freed. Any entry nobody removes
by hand only gets closed once the binfmt_misc superblock is shut down.
If the interpreter lives on a mount that keeps that superblock alive the
two pin each other:
binfmt_misc sb -> inode -> entry -> interp_file -> vfsmount -> binfmt_misc sb
TL;DR the file is never closed. Once the mount namespace is gone there
is nothing left to unregister through either.
There are two ways to trigger this bug:
- Point the interpreter at the instance itself. Its files are regular
files owned by the mounter and both bm_get_inode() and
simple_fill_super() leave i_op at empty_iops. So notify_change() falls
back to simple_setattr() and chmod +x works. We never set SB_I_NOEXEC
and so open_exec() accepts it.
- Use the instance as an overlayfs lower layer. The overlay superblock
holds a clone_private_mount() of every layer until it is destroyed and
that clone is in no namespace. So umount_tree() never reaches it.
That's a DoS. And it isn't only the superblock that leaks. It pins the
user namespace it was mounted in, so every iteration permanently eats
one of the caller's user namespace charges.
So let's just do the sane thing. SB_I_NOEXEC makes open_exec() fail on
the instance's own files and s_stack_depth makes overlayfs reject the
layer before it ever takes a clone. That also covers the ecryptfs and
fuse passthrough variants. What 'F' promises is unchanged.
The stable tag is narrower than the Fixes tags on purpose. Before
sandboxed mounts this needed global root against the single instance
everyone shares, and the change doesn't apply to those trees anyway.
* patches from https://patch.msgid.link/20260728-work-binfmt_misc-selfpin-v1-0-74df5daeca5b@kernel.org:
binfmt_misc: don't let an 'F' entry pin its own instance
Link: https://patch.msgid.link/20260728-work-binfmt_misc-selfpin-v1-0-74df5daeca5b@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
An entry registered with 'F' opens its interpreter at registration time
and holds that file until the entry is freed. Any entry nobody removes
by hand only gets closed once the binfmt_misc superblock is shut down.
If the interpreter lives on a mount that keeps that superblock alive the
two pin each other:
binfmt_misc sb -> inode -> entry -> interp_file -> vfsmount -> binfmt_misc sb
TL;DR the file is never closed. Once the mount namespace is gone there
is nothing left to unregister through either.
There are two ways to trigger this bug:
- Point the interpreter at the instance itself. Its files are regular
files owned by the mounter and both bm_get_inode() and
simple_fill_super() leave i_op at empty_iops. So notify_change() falls
back to simple_setattr() and chmod +x works. We never set SB_I_NOEXEC
and so open_exec() accepts it.
- Use the instance as an overlayfs lower layer. The overlay superblock
holds a clone_private_mount() of every layer until it is destroyed and
that clone is in no namespace. So umount_tree() never reaches it.
That's a DoS. And it isn't only the superblock that leaks. It pins the
user namespace it was mounted in, so every iteration permanently eats
one of the caller's user namespace charges.
So let's just do the sane thing. SB_I_NOEXEC makes open_exec() fail on
the instance's own files and s_stack_depth makes overlayfs reject the
layer before it ever takes a clone. That also covers the ecryptfs and
fuse passthrough variants. What 'F' promises is unchanged.
The stable tag is narrower than the Fixes tags on purpose. Before
sandboxed mounts this needed global root against the single instance
everyone shares, and the change doesn't apply to those trees anyway.
Note that SB_I_NODEV is implicitly raised for userns mounts but raise it
explicitly here as well.
Link: https://patch.msgid.link/20260728-work-binfmt_misc-selfpin-v1-1-74df5daeca5b@kernel.org
Fixes: 948b701a60 ("binfmt_misc: add persistent opened binary handler for containers")
Fixes: 21ca59b365 ("binfmt_misc: enable sandboxed mounts")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
David Howells <dhowells@redhat.com> says:
Here are some miscellaneous fixes for netfslib.
(1) Clear PG_private_2 on copy-to-cache append failure.
(2) Fix handling of rolling buffer allocation failure in single-object
writeback. This is probably unnecessary with (4), but if we're only
writing to the cache, we can skip the write.
(3) Fix cleanup of readeahead folios if iterator preparation fails.
(4) Fix folio_queue allocation failure in writeback by adding a mempool.
This also improves request and subrequest allocation.
* patches from https://patch.msgid.link/20260727130716.1099906-1-dhowells@redhat.com:
netfs: Fix folio_queue ENOMEM in writeback by adding a mempool
netfs: release readahead folios on iterator preparation failure
netfs: handle single writeback rolling buffer allocation failure
netfs: clear PG_private_2 on copy-to-cache append failure
Link: https://patch.msgid.link/20260727130716.1099906-1-dhowells@redhat.com
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
ieee80211_process_rx_twt_action() only partially validates a received
S1G TWT setup frame before queueing it.
An individual agreement can therefore reach ieee80211_s1g_rx_twt_setup()
with twt->length too short for the full struct ieee80211_twt_params.
The individual path passes twt to drv_add_twt_setup(). Both the tracepoint
and the driver callback consume the complete parameters block, not merely
req_type. Do not pass a short individual agreement to the driver.
Broadcast agreements remain unchanged because they are rejected locally
after accessing only req_type.
Fixes: f5a4c24e68 ("mac80211: introduce individual TWT support in AP mode")
Assisted-by: Codex:gpt-5
Assisted-by: Claude:opus-4.8
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260723010928.76551-1-enderaoelyther@gmail.com
[edit commit message to not overclaim lack of validation nor
understate driver impact]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
nl80211_pmsr_start() assigns the request cookie, calls the driver's
->start_pmsr() callback, and only then adds the request to
wdev->pmsr_list, without holding pmsr_lock for the addition.
mac80211_hwsim saves the request in its start callback and returns. Since
nl80211 uses parallel_ops, an immediate REPORT_PMSR can then run before
nl80211_pmsr_start() reaches its post-start list_add_tail(). hwsim also
dispatches reports from its virtio receive workqueue. Completion removes
the request from wdev->pmsr_list under pmsr_lock and frees it.
Thus completion can precede publication, race the unlocked list mutation,
or free the request before nl80211_pmsr_start() reads req->cookie for the
netlink reply.
Add the request to wdev->pmsr_list under pmsr_lock before calling the
driver, and use a cookie value saved before the call so the request is not
dereferenced after a successful start. On an error return the driver has
not retained or completed the request, so remove it from the list under the
lock and free it.
Fixes: 9bb7e0f24e ("cfg80211: add peer measurement with FTM initiator API")
Link: https://lore.kernel.org/all/20260723010916.76433-1-enderaoelyther@gmail.com/
Assisted-by: Codex:gpt-5
Assisted-by: Claude:opus-4.8
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260723202223.99661-1-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mwifiex_11n_dispatch_amsdu_pkt() splits an A-MSDU with
ieee80211_amsdu_to_8023s() and walks the resulting subframes. For each
subframe it passes the subframe data pointer to
mwifiex_process_tdls_action_frame(), but pairs it with skb->len, the
length of the A-MSDU parent, instead of rx_skb->len:
rx_skb = __skb_dequeue(&list);
rx_hdr = (struct rx_packet_hdr *)rx_skb->data;
if (ISSUPP_TDLS_ENABLED(priv->adapter->fw_cap_info) &&
ntohs(rx_hdr->eth803_hdr.h_proto) == ETH_P_TDLS) {
mwifiex_process_tdls_action_frame(priv, (u8 *)rx_hdr,
skb->len);
}
The parent is not a valid description of that buffer, and may not be
valid memory at all. ieee80211_amsdu_to_8023s() ends with
if (!reuse_skb)
dev_kfree_skb(skb);
and it only sets reuse_skb when the parent is linear, is not a
head_frag, and is being consumed as the *last* subframe. So when the
parent does not qualify for reuse it has already been freed, and the
read of skb->len is a use-after-free. When it is reused, skb->len is
the length of the last subframe, applied to every earlier subframe,
which over-states the buffer whenever an earlier subframe is shorter.
The callee cannot absorb a wrong length, because it derives its own
ceiling from the value it is given. Each frame type computes
ies_len = len - sizeof(struct ethhdr) - TDLS_*_FIX_LEN;
and the element walk is then bounded entirely against that ceiling,
for (end = pos + ies_len; pos + 1 < end; pos += 2 + pos[1]) {
u8 ie_len = pos[1];
if (pos + 2 + ie_len > end)
break;
so a too-large len moves end past the end of the subframe and the walk
reads and copies beyond it. The A-MSDU layout is chosen by the sender,
which makes the difference between the last subframe and a shorter
earlier one remotely selectable. Reaching this requires TDLS support in
firmware and the TDLS ethertype on the subframe.
The other caller, mwifiex_process_rx_packet(), is correct: it passes a
pointer and a length that describe the same region of the RX buffer.
Pass rx_skb->len, the length of the subframe actually being parsed.
Fixes: 776f742040 ("mwifiex: fix AMPDU not setup on TDLS link problem")
Assisted-by: Codex:gpt-5.6-sol
Assisted-by: Kimi:K3
Cc: stable@vger.kernel.org
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260728115325.19128-1-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The KASAN allocation trace shows that a malformed IE buffer is
stored via SIOCSIWGENIE (cfg80211_wext_siwgenie()) without any
validation. The crash trace shows that a subsequent SIOCSIWESSID
triggers a connection attempt which calls cfg80211_sme_get_conn_ies()
to process the stored IE buffer, causing:
- An out-of-bounds read in skip_ie() which reads ies[pos+1]
(the length byte) past the end of the 1-byte buffer.
- An integer underflow in the memcpy size argument when offs
returned by ieee80211_ie_split() exceeds ies_len, causing
unsigned subtraction to wrap to SIZE_MAX and triggering a
fortify panic.
Fix this by validating the IE buffer in cfg80211_wext_siwgenie()
before storing it.
Reported-by: syzbot+cc867e537e4bd36f69bb@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=cc867e537e4bd36f69bb
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Link: https://patch.msgid.link/20260725142028.32560-1-kartikey406@gmail.com
[drop unnecessary ie_len check, update commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Jeff Johnson says:
==================
ath.git update for v7.2-rc6
Fix an ath12k MLO regression impacting WCN7850/QCC2072.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_stop_tx_ba_cb() hands tid_tx to kfree_rcu() through
ieee80211_remove_tid_tx(), and then reads tid_tx->ndp after dropping
sta->lock:
ieee80211_remove_tid_tx(sta, tid); /* kfree_rcu(tid_tx, rcu_head) */
...
spin_unlock_bh(&sta->lock);
if (start_txq)
ieee80211_agg_start_txq(sta, tid, false);
if (send_delba)
ieee80211_send_delba(..., tid_tx->ndp);
That read is not covered by an RCU read-side critical section, and it runs
in preemptible process context: both callers hold the wiphy mutex, reaching
it either from the ieee80211_ba_session_work() wiphy work or from
ieee80211_sta_tear_down_BA_sessions() during station teardown.
Softirqs can run in that window too, both from the local_bh_enable() that
ends ieee80211_agg_start_txq() and from any interrupt exit, so the RCU
callback can free tid_tx before the read.
Driving the function from a test module with the grace period forced into
that window, KASAN reports the read, and the free arrives on the ordinary
RCU softirq path:
BUG: KASAN: slab-use-after-free in ieee80211_stop_tx_ba_cb+0x3cd/0x400
Read of size 1 at addr ffff888002b9f52e by task kworker/0:1/10
[...]
Freed by task 57:
__kasan_slab_free+0x47/0x70
__rcu_free_sheaf_prepare+0x70/0x250
rcu_free_sheaf_nobarn+0x18/0x40
rcu_core+0x426/0x1310
handle_softirqs+0x144/0x590
__irq_exit_rcu+0xea/0x150
irq_exit_rcu+0x9/0x20
sysvec_apic_timer_interrupt+0x6b/0x80
asm_sysvec_apic_timer_interrupt+0x1a/0x20
send_delba is only set when tx_stop is set, which happens for
AGG_STOP_LOCAL_REQUEST alone, so this is reached on local teardown -
session idle timeout, PTK rekey, suspend, HW reconfig - and not from a
peer's DELBA.
Read ndp into a local before the session is freed, while sta->lock is still
held. tid_tx->ndp has a single writer, in
ieee80211_tx_ba_session_handle_start(), which cannot run concurrently here:
both paths are serialised by the wiphy mutex, and the session is already
marked HT_AGG_STATE_STOPPING at this point. tid_tx->ndp is also the only
tid_tx dereference left after ieee80211_remove_tid_tx() in this function.
Fixes: 98acd4c1d9 ("wifi: mac80211: add support for NDP ADDBA/DELBA for S1G")
Assisted-by: Codex:gpt-5.6-sol
Assisted-by: Kimi:K3
Cc: stable@vger.kernel.org
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260728112156.96822-1-enderaoelyther@gmail.com
[move/change the comment a bit to be more general not just on ndp,
initialize ndp directly]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The binner BO is a single 16MB buffer split into 512KB slots that are
handed out to jobs at submission time and recycled as jobs complete,
without ever being cleared. Each slot holds the job's Tile State Data
Array (TSDA) at its start, followed by the tile allocation pool.
While the tile allocation pool is only walked by the render thread
through branches the binner generated during the current job, the
TSDA is the PTB's own per-tile bookkeeping and is consumed by the
hardware itself. Although the kernel sets the "Auto-initialise Tile
State Data Array" flag in the tile binning mode configuration, the
PTB demonstrably still acts on stale tile state left by the slot's
previous user: the binner ends up creating invalid command streams
with invalid primitive streams and branches, which can cause GPU hangs
as observed in [1][2].
Zero the TSDA when the job's binning slot is configured. This clears
48 bytes per tile (~24KB for a 1080p frame) in the submission path, and
guarantees the PTB never sees another job's tile state.
The tile count is only checked for being non-zero today, so the 8-bit
fields it comes from can describe a tile state array almost six times
larger than the slot it has to live in. Bound it before the slot is
handed out, since such size decides how much of the slot is left for
the tile alloc pool.
Link: https://github.com/raspberrypi/linux/issues/3221 [1]
Link: https://github.com/raspberrypi/linux/issues/5780 [2]
Fixes: 553c942f8b ("drm/vc4: Allow using more than 256MB of CMA memory.")
Cc: stable@vger.kernel.org
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260727-vc4-bin-oom-fixes-v2-2-0d8a5eddc7c9@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
vc4_overflow_mem_work() points BPOA at a 512KB slot inside the 16MB
binner BO, but writes the size of the whole BO to BPOS. On every binner
out-of-memory event the PTB is therefore authorized to write tile lists
across all the other slots (which may hold the tile state, tile alloc and
overflow memory of in-flight jobs) and, for any slot but the first, past
the end of the binner BO into unrelated CMA memory.
Since CMA pages are recycled into page cache and user allocations, this
is arbitrary memory corruption by GPU DMA. In practice it shows up as GPU
hangs with corrupted control list pointers, userspace heap corruption, a
GPU that stays permanently wedged after the first hang, and occasional
full system crashes, whenever a job overflows the initial binner slot.
The bug dates back to the conversion from a dedicated overflow BO (where
writing the full BO size was correct) to the slotted binner BO.
Fixes: 553c942f8b ("drm/vc4: Allow using more than 256MB of CMA memory.")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4.8
Signed-off-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260727-vc4-bin-oom-fixes-v2-1-0d8a5eddc7c9@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
syzbot reported a memory leak [1] in the UDP tunnel NIC offload code.
When device registration fails (e.g. in register_netdevice()), netdev core
unwinds by sending a single NETDEV_UNREGISTER notification. If work was queued
during NETDEV_REGISTER (utn->work_pending is set), udp_tunnel_nic_unregister()
returns early:
if (utn->work_pending)
return;
Because failed registrations do not enter netdev_wait_allrefs_any(), no
subsequent NETDEV_UNREGISTER rebroadcast will ever occur. As a result, the
struct udp_tunnel_nic allocated in udp_tunnel_nic_alloc() is leaked
permanently.
Fix this by removing the early return. Instead, synchronously cancel any
pending work with cancel_delayed_work_sync() before freeing @utn.
To be able to call cancel_delayed_work_sync() while holding RTNL (the work also
needs RTNL), switch udp_tunnel_nic_device_sync_work() to rtnl_trylock(). If RTNL
is contended, requeue the work with a 1 jiffy delay (via queue_delayed_work())
to prevent high CPU contention while waiting for RTNL lock.
The utn->work_pending bookkeeping is no longer needed and is removed, as
the workqueue core already tracks the pending/running state of the work.
[1]
BUG: memory leak
unreferenced object 0xffff888127d5f840 (size 96):
comm "syz-executor", pid 5806, jiffies 4294942188
backtrace (crc 99fdb6c8):
__kmalloc_noprof+0x3bf/0x550
udp_tunnel_nic_alloc net/ipv4/udp_tunnel_nic.c:756 [inline]
udp_tunnel_nic_register net/ipv4/udp_tunnel_nic.c:833 [inline]
udp_tunnel_nic_netdevice_event+0x804/0xab0 net/ipv4/udp_tunnel_nic.c:931
notifier_call_chain+0x59/0x160 kernel/notifier.c:85
call_netdevice_notifiers_info+0x7d/0xb0 net/core/dev.c:2250
register_netdevice+0xc10/0xeb0 net/core/dev.c:11478
Fixes: cc4e3835ef ("udp_tunnel: add central NIC RX port offload infrastructure")
Reported-by: syzbot+eca845fb8c18dd6b44c1@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a632b15.dde6c935.cf6c8.0011.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260724091137.1792543-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
bpf_lwt_xmit_reroute() obtains a referenced dst from the route
lookup. When skb_cow_head() fails before that dst is installed on the
skb, the error path only frees the skb. The skb still owns its previous
dst, so the newly looked up dst reference is leaked.
Release the new dst reference before freeing the skb on this error
path.
Fixes: 3bd0b15281 ("bpf: add handling of BPF_LWT_REROUTE to lwt_bpf.c")
Cc: stable@vger.kernel.org
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Link: https://patch.msgid.link/20260723060445.21926-1-xuanqiang.luo@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
__smc_lgr_terminate() drops conns_lock after finding a connection in
lgr->conns_all, but before taking a reference on its socket. The connection
is embedded in the socket, and its registration reference protects it only
while the connection remains in the tree.
A concurrent close can unregister the connection and drop that reference,
freeing the socket before the termination worker reaches sock_hold().
The race is reachable when close overlaps link group termination.
Local stress testing reproduced the use-after-free and KASAN reported:
BUG: KASAN: slab-use-after-free in __smc_lgr_terminate.part.0 [smc]
Write of size 4 by task kworker/3:3
Workqueue: events smc_lgr_terminate_work [smc]
__smc_lgr_terminate.part.0 [smc]
The socket was allocated by smc_create(), freed through
slab_free_after_rcu_debug(), and was followed by:
refcount_t: addition on 0; use-after-free.
__smc_lgr_terminate.part.0 [smc]
Take the socket reference while conns_lock still protects the tree entry.
The unregister path then cannot drop the last reference until termination
has finished using the socket.
Fixes: 69318b5215 ("net/smc: improve abnormal termination locking")
Cc: stable@vger.kernel.org
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Reviewed-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Link: https://patch.msgid.link/20260723105454.87016-1-xuanqiang.luo@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
u32_change() copies the user-provided tc_u32_sel.offshift (unsigned char,
0-255) into the kernel knode object without bounds validation. When a
packet later hits u32_classify() with TC_U32_VAROFFSET set, it evaluates
`ntohs(offmask & *data) >> offshift` where the left operand is a 16-bit
value promoted to a 32-bit int. Any offshift >= 32 is undefined behavior
per C11 6.5.7p3, triggerable by an unprivileged user via user/network
namespaces.
UBSAN: shift-out-of-bounds in net/sched/cls_u32.c:236:43
shift exponent 32 is too large for 32-bit type int
Fix this by rejecting offshift >= 16 during filter creation in
u32_change().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: AutonomousCodeSecurity@microsoft.com
Link: https://lore.kernel.org/all/20260720034514.23053-1-blbllhy@gmail.com
Signed-off-by: Cen Zhang (Microsoft) <blbllhy@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Tested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260723044955.89471-1-blbllhy@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
mpls_getroute() builds the RTM_NEWROUTE reply to an RTM_GETROUTE
request by filling a struct rtmsg allocated from an skb whose data
area is not zeroed (alloc_skb(NLMSG_GOODSIZE, ...)). It sets every
field of the header except rtm_tos:
r = nlmsg_data(nlh);
r->rtm_family = AF_MPLS;
r->rtm_dst_len = 20;
r->rtm_src_len = 0;
r->rtm_table = RT_TABLE_MAIN;
r->rtm_type = RTN_UNICAST;
r->rtm_scope = RT_SCOPE_UNIVERSE;
r->rtm_protocol = rt->rt_protocol;
r->rtm_flags = 0;
struct rtmsg has no padding, so the one uninitialised byte rtm_tos
(offset 3) is copied straight to user space on recvmsg(), leaking a
byte of uninitialised heap memory. This is in contrast to
mpls_dump_route(), which fills the very same header and does set
rtm_tos = 0.
Initialize rtm_tos to 0, matching mpls_dump_route().
Reproduced with KMSAN by adding an MPLS route and issuing a
non-RTM_F_FIB_MATCH RTM_GETROUTE for its label:
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x36c/0x33f0
_copy_to_iter+0x36c/0x33f0
__skb_datagram_iter+0x196/0x12c0
skb_copy_datagram_iter+0x5b/0x210
netlink_recvmsg+0x37b/0xef0
...
Uninit was created at:
__alloc_skb+0x8ca/0x10e0
mpls_getroute+0x1280/0x3a40
rtnetlink_rcv_msg+0x1138/0x15a0
...
Byte 19 of 64 is uninitialized
(byte 19 = nlmsghdr(16) + rtmsg offset 3 = rtm_tos)
Fixes: 397fc9e5ce ("mpls: route get support")
Signed-off-by: Yehyeong Lee <yhlee@isslab.korea.ac.kr>
Link: https://patch.msgid.link/20260723010830.289917-1-yhlee@isslab.korea.ac.kr
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
fou_create() publishes struct fou through sk_user_data before adding the
new FOU port to the per-netns list. If fou_add_to_port_list() fails,
the error path frees fou while it is still reachable through
sk_user_data. A concurrent receive can then dereference the freed
object in fou_from_sock().
This ordering issue was previously noted in the linked discussion.
The failure is reachable when local port 0 is requested. Each socket
binds to a different ephemeral port, but fou_cfg_cmp() compares the
requested port 0 and reports -EALREADY once an entry already exists.
Release the tunnel socket before freeing fou so sk_user_data is cleared
first, and defer reclamation with kfree_rcu() to protect concurrent RCU
readers. This matches the lifetime handling in fou_release().
Fixes: 23461551c0 ("fou: Support for foo-over-udp RX path")
Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://lore.kernel.org/netdev/20260502031401.3557229-12-kuniyu@google.com/
Cc: stable@vger.kernel.org
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Link: https://patch.msgid.link/20260722083858.182506-1-xuanqiang.luo@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
I2C controllers may have child devices with GpioInt resources that
depend on GPIO controllers being fully initialized. If the I2C
controller probes and enumerates children before the referenced GPIO
controller has completed probe, GPIO interrupts may not be properly
configured, leading to device failures.
On Lenovo Yoga 7 14AGP11, the WACF2200 touchscreen (child of
AMDI0010:02) has a GpioInt resource pointing to GPIO 157 on the
pinctrl-amd controller (AMDI0030:00). When i2c-designware probes
AMDI0010:02 before pinctrl-amd finishes initializing, I2C transactions
fail with lost arbitration errors:
0.285952 amd_gpio_probe: registering gpiochip <- GPIO chip visible
0.287121 amd_gpio_probe: requesting parent IRQ <- probe still running
0.301454 AMDI0010:02 dw_i2c_plat_probe: start <- races here
2.348157 lost arbitration
Add a dependency check that walks ACPI child devices and defers probe
until any referenced GPIO controller is bound.
Fixes: 3812a9e842 ("pinctrl-amd: enable IRQ for WACF2200 touchscreen on Lenovo Yoga 7 14AGP11")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221494
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Hardik Prakash <hardikprakash.official@gmail.com>
Assisted-by: Claude:claude-sonnet-5
Assisted-by: DeepSeek:deepseek-v4-pro
Cc: <stable@vger.kernel.org> # v7.1+
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260718054330.8975-2-hardikprakash.official@gmail.com
In afs_make_call(), there's a race with async call reception and
destruction. If a call is dispatched that doesn't have call->write_iter
set (used to specify the data content for FS.StoreData), then the first
rxrpc_kernel_send_data() will not set MSG_MORE in the msghdr.
Once rxrpc_send_data() queues the last request packet, the response could
come in at any time and cause the call to be completed and put. However,
afs_make_call() will look at the call again to see it ->write_iter should
be handled - something it's only allowed to do if it has its own ref on the
call. Whilst this is the case for synchronous calls, it isn't true for
async calls such as FS.FetchData.
There's also a potential UAF in afs_make_call() in the event that an
asynchronous call is being sent, but the call fails in some way (e.g. it
gets aborted from the server). The problem there is that afs_make_call()
tries to abort a call if the rxrpc send fails, but the asynchronous
notification from rxrpc may have caused the afs_call to be torn down.
generic/650 plays games with randomly taking CPUs offline, and can
interject a significant delay such that the call is deallocated before
afs_make_call() gets to check call->write_iter - and a UAF ensues (caught
by KASAN).
BUG: KASAN: slab-use-after-free in afs_make_call+0x1c90/0x2210 [kafs]
Read of size 8 at addr ffff888035e050e8 by task fsstress/1409
Fix this by making afs_make_op_call() give the op->call its own ref rather
than transferring the caller's ref to it and then dropping the ref when
afs_make_call() returns.
This also means that the afs_make_call() func never loses its ref on the
call now.
Fixes: eddf51f2bb ("afs: Make {Y,}FS.FetchData an asynchronous operation")
Fixes: e49c7b2f6d ("afs: Build an abstraction around an "operation" concept")
Link: https://sashiko.dev/#/patchset/20260702144919.172295-1-dhowells%40redhat.com
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/20260723113452.566619-4-dhowells@redhat.com
cc: Jeffrey Altman <jaltman@auristor.com>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Commit d7a6797e0b ("powerpc: add exit_flags field in pt_regs") added
the exit_flags field to struct pt_regs to pass internal exit control
flags (e.g. _TIF_RESTOREALL) from syscall_exit_prepare() to the
low-level assembly exit path.
However, the field was placed in a way that was visible to userspace
tools such as strace via PTRACE_GETREGS, or caused a struct layout or
size regression observable through ptrace. The field is purely
kernel-internal and must not be exposed beyond the user_pt_regs
boundary.
Move exit_flags into struct thread_info where it is only accessible to
the kernel, and keep it out of the ptrace-visible register window
entirely.
Fixes: d7a6797e0b ("powerpc: add exit_flags field in pt_regs")
Reported-by: Dmitry V. Levin <ldv@strace.io>
Closes: https://lore.kernel.org/all/20260722070155.GA11808@strace.io/
Signed-off-by: Mukesh Kumar Chaurasiya (IBM) <mkchauras@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260723194809.4046600-1-mkchauras@gmail.com
On PowerMac G5 (PPC970, CONFIG_PPC_970_NAP) the system panics shortly
after boot with symptoms including instruction fetch faults, kernel data
access faults, and stack corruption, predominantly on SMP and always
somewhere inside softirq processing.
The PPC970 idle path works by setting _TLF_NAPPING in the current
thread's local flags before entering the MSR_POW nap loop. When any
async interrupt wakes the CPU, nap_adjust_return() is expected to detect
_TLF_NAPPING, clear it, and rewrite regs->NIP to power4_idle_nap_return
so that the interrupt returns cleanly to the caller of power4_idle_nap()
rather than back into the nap spin loop.
DEFINE_INTERRUPT_HANDLER_ASYNC generates the following sequence:
irq_enter_rcu();
____func(regs); /* timer_interrupt / do_IRQ body */
irq_exit_rcu(); /* softirqs run here, irqs re-enabled */
arch_interrupt_async_exit_prepare(regs); /* nap_adjust_return was here */
irqentry_exit(regs, state);
irq_exit_rcu() calls invoke_softirq() -> do_softirq_own_stack(), which
runs softirqs with hardware interrupts re-enabled. A nested async
interrupt can therefore arrive while _TLF_NAPPING is still set. That
nested interrupt reaches nap_adjust_return() in its own
arch_interrupt_async_exit_prepare() call, finds _TLF_NAPPING set, and
redirects *its own* regs->NIP to power4_idle_nap_return. Returning via
that blr with an unrelated LR on the softirq stack jumps to a garbage
address, causing the observed crashes.
The comment that previously lived in arch_interrupt_async_exit_prepare()
even described this exact hazard ("must come before irq_exit()"), but
nap_adjust_return() was placed after irq_exit_rcu() in the macro, so
the protection was never effective.
Fix this by calling nap_adjust_return() inside DEFINE_INTERRUPT_HANDLER_ASYNC
immediately before irq_exit_rcu(), ensuring _TLF_NAPPING is cleared and
regs->NIP is adjusted before any code that can re-enable interrupts or
invoke softirqs runs. Move the explanatory comment into
nap_adjust_return() itself and remove it from arch_interrupt_async_exit_prepare().
Fixes: bee25f97ad ("powerpc: Enable GENERIC_ENTRY feature")
Closes: https://lore.kernel.org/all/87wlvazrdy.fsf@igel.home/
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Mukesh Kumar Chaurasiya (IBM) <mkchauras@gmail.com>
Tested-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260707172430.790040-1-mkchauras@gmail.com
During pSeries_setup_arch(), VPA for boot-cpu is first to be
initialized. However later in the boot, smp_setup_cpu() is called for
setting up VPA on boot and secondary cpus that were brought online. This
results in vpa_init() being called twice for boot-cpu and three redundant
H_REGISTER_VPA hcalls being made to the hypervisor.
Fix this by adding an extra condition in smp_set_cpu() to call vpa_init()
only on non boot-cpus.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260708015842.274690-1-vaibhav@linux.ibm.com
Currently pseries_kexec_cpu_down() skips unregistering vpa, slb_shadow and
dtl areas during a crash and kexec shutdown path. It was done to avoid
doing an HCALL while crashing. However recently Anushree reported that
during kernel crash while the kdump kernel was coming up, Hypervisor
reported invalid values for 'vpa.yield_count' while it dispatching L2-KVM
Guest vcpus. The error manifested as debug build Hypervisor assert
triggering to indicate possible VPA corruption.
Looking at the kexec cpu offline path it was discovered that during crash
kernel doesn't unregister the VPA/SLB-Shadow/DTL area with
Hypervisor. Instead it re-allocates and re-registers these areas
for cpus during boot. During kexec boot the previously allocated areas
can get overwritten with new content without hypervisor knowledge. This
creates a small window where while kexec kernel boots and the L2-VCPUs are
being dispatched, Hypervisor may try to read/write to a wrong memory area
which previously belonged to older VPA.
Fix this possible race and memory corruption by updating
pseries_kexec_cpu_down() to also unregister vpa,slb_shadow & dtl areas
during a kernel crash.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Tested-by: Anushree Mathur <anushree.mathur@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260708015802.274271-1-vaibhav@linux.ibm.com
Correct a previous change (see Fixes) which reduced the standby timeout
from 30 to 5 seconds. Increase it to 15 seconds.
I was troubleshooting an error spotted during system suspend:
[ 1217.152867] ata1.00: Entering standby power mode
[ 1222.322948] ata1.00: qc timeout after 5000 msecs (cmd 0xe0)
[ 1222.324010] ata1.00: STANDBY IMMEDIATE failed (err_mask=0x4)
This drive is a Samsung 870 EVO SSD in good SMART standing, and I wasn't
aware of any reason it should be taking so long to standby. The issue is
intermittent, but I observed it sometimes taking 7 seconds to manually
standby. I assume this was interruption of background maintenance after
a power outage.
As a desktop user, I would prefer to wait the extra 2 seconds at suspend
to let the drive finish its business rather than drop the rails from
under it.
The change from 30 to 5 seconds was implicit when switching suspend
from START STOP UNIT to an internal command with no timeout table entry.
No reason was stated for the change.
Fixes: aa3998dbeb ("ata: libata-scsi: Disable scsi device manage_system_start_stop")
Cc: stable@vger.kernel.org
Signed-off-by: Matt Vollrath <tactii@gmail.com>
Assisted-by: Claude:claude-5-fable
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Modify comments to prevent kernel-doc warnings:
- use "/*" for a non-kernel-doc comment
- add a Returns: section for ata_id_major_version()
Warning: include/linux/ata.h:770 Cannot find identifier on line:
*
Warning: include/linux/ata.h:782 function parameter 'id' not described in 'ata_id_sct_data_tables'
Warning: include/linux/ata.h:782 expecting prototype for Word(). Prototype was for ata_id_sct_data_tables() instead
Warning: include/linux/ata.h:820 No description found for return value of 'ata_id_major_version'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Several code paths update the VFS inode size by calling
netfs_resize_file() and cifs_setsize(), but omit the corresponding
fscache_resize_cookie() call, leaving the fscache cookie out of sync
with the actual file size:
- cifs_file_set_size() in inode.c: server-side truncation via setattr
- cifs_do_truncate() in file.c: truncates to zero on O_TRUNC open
- smb2_duplicate_extents() in smb2ops.c: file clone extending EOF
- smb3_simple_falloc() in smb2ops.c: two branches that extend EOF
via write-range and SMB2_set_eof respectively
Since every caller of cifs_setsize() must resize the fscache cookie,
add the call to cifs_setsize() itself, consistent with how
truncate_pagecache() is already consolidated there.
Fixes: 70431bfd82 ("cifs: Support fscache indexing rewrite")
Fixes: 93a4315512 ("cifs: Fix missing set of remote_i_size")
Fixes: 110fee6b9b ("smb: client: fix missing timestamp updates with O_TRUNC")
Fixes: 7a06d3b816 ("smb/client: emulate small EOF-extending mode 0 fallocate ranges")
Cc: stable@vger.kernel.org
Cc: David Howells <dhowells@redhat.com>
Cc: Paulo Alcantara <pc@manguebit.org>
Cc: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Reviewed-by: Paulo Alcantara <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
