Assert that the GPA for a memslot backed by a hugepage is aligned to
the hugepage size and fix perf_test_util accordingly. Lack of GPA
alignment prevents KVM from backing the guest with hugepages, e.g. x86's
write-protection of hugepages when dirty logging is activated is
otherwise not exercised.
Add a comment explaining that guest_page_size is for non-huge pages to
try and avoid confusion about what it actually tracks.
Cc: Ben Gardon <bgardon@google.com>
Cc: Yanan Wang <wangyanan55@huawei.com>
Cc: Andrew Jones <drjones@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Aaron Lewis <aaronlewis@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
[Used get_backing_src_pagesz() to determine alignment dynamically.]
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20211111000310.1435032-5-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Manually padding and aligning the mmap region is only needed when using
THP. When using HugeTLB, mmap will always return an address aligned to
the HugeTLB page size. Add a comment to clarify this and assert the mmap
behavior for HugeTLB.
[Removed requirement that HugeTLB mmaps must be padded per Yanan's
feedback and added assertion that mmap returns aligned addresses
when using HugeTLB.]
Cc: Ben Gardon <bgardon@google.com>
Cc: Yanan Wang <wangyanan55@huawei.com>
Cc: Andrew Jones <drjones@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Aaron Lewis <aaronlewis@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20211111000310.1435032-4-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Refactor align() to work with non-pointers and split into separate
helpers for aligning up vs. down. Add align_ptr_up() for use with
pointers. Expose all helpers so that they can be used by tests and/or
other utilities. The align_down() helper in particular will be used to
ensure gpa alignment for hugepages.
No functional change intended.
[Added sepearate up/down helpers and replaced open-coded alignment
bit math throughout the KVM selftests.]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20211111000310.1435032-3-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When I first looked at this, there was no support for guest exception
handling in the KVM selftests. In fact it was merged into 5.10 before
the Xen support got merged in 5.11, and I could have used it from the
start.
Hook it up now, to exercise the Xen upcall delivery. I'm about to make
things a bit more interesting by handling the full 2level event channel
stuff in-kernel on top of the basic vector injection that we already
have, and I'll want to build more tests on top.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211115165030.7422-3-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM/arm64 updates for Linux 5.16
- More progress on the protected VM front, now with the full
fixed feature set as well as the limitation of some hypercalls
after initialisation.
- Cleanup of the RAZ/WI sysreg handling, which was pointlessly
complicated
- Fixes for the vgic placement in the IPA space, together with a
bunch of selftests
- More memcg accounting of the memory allocated on behalf of a guest
- Timer and vgic selftests
- Workarounds for the Apple M1 broken vgic implementation
- KConfig cleanups
- New kvmarm.mode=none option, for those who really dislike us
Though gcc conveniently compiles a simple memset to "rep stos," clang
prefers to call the libc version of memset. If a test is dynamically
linked, the libc memset isn't available in L1 (nor is the PLT or the
GOT, for that matter). Even if the test is statically linked, the libc
memset may choose to use some CPU features, like AVX, which may not be
enabled in L1. Note that __builtin_memset doesn't solve the problem,
because (a) the compiler is free to call memset anyway, and (b)
__builtin_memset may also choose to use features like AVX, which may
not be available in L1.
To avoid a myriad of problems, use an explicit "rep stos" to clear the
VMCB in generic_svm_setup(), which is called both from L0 and L1.
Reported-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Fixes: 20ba262f86 ("selftests: KVM: AMD Nested test infrastructure")
Message-Id: <20210930003649.4026553-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Recent kernels have checks to ensure the GPA values in special-purpose
registers like CR3 are within the maximum physical address range and
don't overlap with anything in the upper/reserved range. In the case of
SEV kselftest guests booting directly into 64-bit mode, CR3 needs to be
initialized to the GPA of the page table root, with the encryption bit
set. The kernel accounts for this encryption bit by removing it from
reserved bit range when the guest advertises the bit position via
KVM_SET_CPUID*, but kselftests currently call KVM_SET_SREGS as part of
vm_vcpu_add_default(), before KVM_SET_CPUID*.
As a result, KVM_SET_SREGS will return an error in these cases.
Address this by moving vcpu_set_cpuid() (which calls KVM_SET_CPUID*)
ahead of vcpu_setup() (which calls KVM_SET_SREGS).
While there, address a typo in the assertion that triggers when
KVM_SET_SREGS fails.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-Id: <20211006203617.13045-1-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Nathan Tempelman <natet@google.com>
* kvm/selftests/memslot:
: .
: Enable KVM memslot selftests on arm64, making them less
: x86 specific.
: .
KVM: selftests: Build the memslot tests for arm64
KVM: selftests: Make memslot_perf_test arch independent
Signed-off-by: Marc Zyngier <maz@kernel.org>
memslot_perf_test uses ucalls for synchronization between guest and
host. Ucalls API is architecture independent: tests do not need to know
details like what kind of exit they generate on a specific arch. More
specifically, there is no need to check whether an exit is KVM_EXIT_IO
in x86 for the host to know that the exit is ucall related, as
get_ucall() already makes that check.
Change memslot_perf_test to not require specifying what exit does a
ucall generate. Also add a missing ucall_init.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210907180957.609966-2-ricarkol@google.com
vCPU file descriptors are abstracted away from test code in KVM
selftests, meaning that tests cannot directly access a vCPU's device
attributes. Add helpers that tests can use to get at vCPU device
attributes.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20210916181555.973085-5-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The KVM_CREATE_DEVICE and KVM_{GET,SET}_DEVICE_ATTR ioctls are defined
to return a value of zero on success. As such, tighten the assertions in
the helper functions to only pass if the return code is zero.
Suggested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20210916181555.973085-4-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a selftest for the new KVM clock UAPI that was introduced. Ensure
that the KVM clock is consistent between userspace and the guest, and
that the difference in realtime will only ever cause the KVM clock to
advance forward.
Cc: Andrew Jones <drjones@redhat.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20210916181555.973085-3-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* kvm-arm64/selftest/timer:
: .
: Add a set of selftests for the KVM/arm64 timer emulation.
: Comes with a minimal GICv3 infrastructure.
: .
KVM: arm64: selftests: arch_timer: Support vCPU migration
KVM: arm64: selftests: Add arch_timer test
KVM: arm64: selftests: Add host support for vGIC
KVM: arm64: selftests: Add basic GICv3 support
KVM: arm64: selftests: Add light-weight spinlock support
KVM: arm64: selftests: Add guest support to get the vcpuid
KVM: arm64: selftests: Maintain consistency for vcpuid type
KVM: arm64: selftests: Add support to disable and enable local IRQs
KVM: arm64: selftests: Add basic support to generate delays
KVM: arm64: selftests: Add basic support for arch_timers
KVM: arm64: selftests: Add support for cpu_relax
KVM: arm64: selftests: Introduce ARM64_SYS_KVM_REG
tools: arm64: Import sysreg.h
KVM: arm64: selftests: Add MMIO readl/writel support
Signed-off-by: Marc Zyngier <maz@kernel.org>
Since the timer stack (hardware and KVM) is per-CPU, there
are potential chances for races to occur when the scheduler
decides to migrate a vCPU thread to a different physical CPU.
Hence, include an option to stress-test this part as well by
forcing the vCPUs to migrate across physical CPUs in the
system at a particular rate.
Originally, the bug for the fix with commit 3134cc8beb
("KVM: arm64: vgic: Resample HW pending state on deactivation")
was discovered using arch_timer test with vCPU migrations and
can be easily reproduced.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211007233439.1826892-16-rananta@google.com
Add a KVM selftest to validate the arch_timer functionality.
Primarily, the test sets up periodic timer interrupts and
validates the basic architectural expectations upon its receipt.
The test provides command-line options to configure the period
of the timer, number of iterations, and number of vCPUs.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211007233439.1826892-15-rananta@google.com
Implement a simple library to perform vGIC-v3 setup
from a host point of view. This includes creating a
vGIC device, setting up distributor and redistributor
attributes, and mapping the guest physical addresses.
The definition of REDIST_REGION_ATTR_ADDR is taken from
aarch64/vgic_init test. Hence, replace the definition
by including vgic.h in the test file.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211007233439.1826892-14-rananta@google.com
With the inclusion of sysreg.h, that brings in system register
encodings, it would be redundant to re-define register encodings
again in processor.h to use it with ARM64_SYS_REG for the KVM
functions such as set_reg() or get_reg(). Hence, add helper macro,
ARM64_SYS_KVM_REG, that converts SYS_* definitions in sysreg.h
into ARM64_SYS_REG definitions.
Also replace all the users of ARM64_SYS_REG, relying on
the encodings created in processor.h, with ARM64_SYS_KVM_REG and
remove the definitions.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211007233439.1826892-5-rananta@google.com
Add a new test into vgic_init which checks that the first vcpu fails to
run if there is not sufficient REDIST space below the addressable IPA
range. This only applies to the KVM_VGIC_V3_ADDR_TYPE_REDIST legacy API
as the required REDIST space is not know when setting the DIST region.
Note that using the REDIST_REGION API results in a different check at
first vcpu run: that the number of redist regions is enough for all
vcpus. And there is already a test for that case in, the first step of
test_v3_new_redist_regions.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211005011921.437353-11-ricarkol@google.com
Add tests for checking that KVM returns the right error when trying to
set GICv2 CPU interfaces or GICv3 Redistributors partially above the
addressable IPA range. Also tighten the IPA range by replacing
KVM_CAP_ARM_VM_IPA_SIZE with the IPA range currently configured for the
guest (i.e., the default).
The check for the GICv3 redistributor created using the REDIST legacy
API is not sufficient as this new test only checks the check done using
vcpus already created when setting the base. The next commit will add
the missing test which verifies that the KVM check is done at first vcpu
run.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211005011921.437353-10-ricarkol@google.com
As a preparation for the next commits which will add some tests for
GICv2, make aarch64/vgic_init GIC version agnostic. Add a new generic
run_tests function(gic_dev_type) that starts all applicable tests using
GICv3 or GICv2. GICv2 tests are attempted if GICv3 is not available in
the system. There are currently no GICv2 tests, but the test passes now
in GICv2 systems.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211005011921.437353-7-ricarkol@google.com
The objtool warning that the kvm instruction emulation code triggered
wasn't very useful:
arch/x86/kvm/emulate.o: warning: objtool: __ex_table+0x4: don't know how to handle reloc symbol type: kvm_fastop_exception
in that it helpfully tells you which symbol name it had trouble figuring
out the relocation for, but it doesn't actually say what the unknown
symbol type was that triggered it all.
In this case it was because of missing type information (type 0, aka
STT_NOTYPE), but on the whole it really should just have printed that
out as part of the message.
Because if this warning triggers, that's very much the first thing you
want to know - why did reloc2sec_off() return failure for that symbol?
So rather than just saying you can't handle some type of symbol without
saying what the type _was_, just print out the type number too.
Fixes: 24ff652573 ("objtool: Teach get_alt_entry() about more relocation types")
Link: https://lore.kernel.org/lkml/CAHk-=wiZwq-0LknKhXN4M+T8jbxn_2i9mcKpO+OaBSSq_Eh7tg@mail.gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull objtool fix from Borislav Petkov:
- Handle symbol relocations properly due to changes in the toolchains
which remove section symbols now
* tag 'objtool_urgent_for_v5.15_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Teach get_alt_entry() about more relocation types
Pull more kvm fixes from Paolo Bonzini:
"Small x86 fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: Ensure all migrations are performed when test is affined
KVM: x86: Swap order of CPUID entry "index" vs. "significant flag" checks
ptp: Fix ptp_kvm_getcrosststamp issue for x86 ptp_kvm
x86/kvmclock: Move this_cpu_pvti into kvmclock.h
selftests: KVM: Don't clobber XMM register when read
KVM: VMX: Fix a TSX_CTRL_CPUID_CLEAR field mask issue
Occasionally objtool encounters symbol (as opposed to section)
relocations in .altinstructions. Typically they are the alternatives
written by elf_add_alternative() as encountered on a noinstr
validation run on vmlinux after having already ran objtool on the
individual .o files.
Basically this is the counterpart of commit 44f6a7c075 ("objtool:
Fix seg fault with Clang non-section symbols"), because when these new
assemblers (binutils now also does this) strip the section symbols,
elf_add_reloc_to_insn() is forced to emit symbol based relocations.
As such, teach get_alt_entry() about different relocation types.
Fixes: 9bc0bb5072 ("objtool/x86: Rewrite retpoline thunk calls")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/YVWUvknIEVNkPvnP@hirez.programming.kicks-ass.net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from mac80211, netfilter and bpf.
Current release - regressions:
- bpf, cgroup: assign cgroup in cgroup_sk_alloc when called from
interrupt
- mdio: revert mechanical patches which broke handling of optional
resources
- dev_addr_list: prevent address duplication
Previous releases - regressions:
- sctp: break out if skb_header_pointer returns NULL in sctp_rcv_ootb
(NULL deref)
- Revert "mac80211: do not use low data rates for data frames with no
ack flag", fixing broadcast transmissions
- mac80211: fix use-after-free in CCMP/GCMP RX
- netfilter: include zone id in tuple hash again, minimize collisions
- netfilter: nf_tables: unlink table before deleting it (race -> UAF)
- netfilter: log: work around missing softdep backend module
- mptcp: don't return sockets in foreign netns
- sched: flower: protect fl_walk() with rcu (race -> UAF)
- ixgbe: fix NULL pointer dereference in ixgbe_xdp_setup
- smsc95xx: fix stalled rx after link change
- enetc: fix the incorrect clearing of IF_MODE bits
- ipv4: fix rtnexthop len when RTA_FLOW is present
- dsa: mv88e6xxx: 6161: use correct MAX MTU config method for this
SKU
- e100: fix length calculation & buffer overrun in ethtool::get_regs
Previous releases - always broken:
- mac80211: fix using stale frag_tail skb pointer in A-MSDU tx
- mac80211: drop frames from invalid MAC address in ad-hoc mode
- af_unix: fix races in sk_peer_pid and sk_peer_cred accesses (race
-> UAF)
- bpf, x86: Fix bpf mapping of atomic fetch implementation
- bpf: handle return value of BPF_PROG_TYPE_STRUCT_OPS prog
- netfilter: ip6_tables: zero-initialize fragment offset
- mhi: fix error path in mhi_net_newlink
- af_unix: return errno instead of NULL in unix_create1() when over
the fs.file-max limit
Misc:
- bpf: exempt CAP_BPF from checks against bpf_jit_limit
- netfilter: conntrack: make max chain length random, prevent
guessing buckets by attackers
- netfilter: nf_nat_masquerade: make async masq_inet6_event handling
generic, defer conntrack walk to work queue (prevent hogging RTNL
lock)"
* tag 'net-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
af_unix: fix races in sk_peer_pid and sk_peer_cred accesses
net: stmmac: fix EEE init issue when paired with EEE capable PHYs
net: dev_addr_list: handle first address in __hw_addr_add_ex
net: sched: flower: protect fl_walk() with rcu
net: introduce and use lock_sock_fast_nested()
net: phy: bcm7xxx: Fixed indirect MMD operations
net: hns3: disable firmware compatible features when uninstall PF
net: hns3: fix always enable rx vlan filter problem after selftest
net: hns3: PF enable promisc for VF when mac table is overflow
net: hns3: fix show wrong state when add existing uc mac address
net: hns3: fix mixed flag HCLGE_FLAG_MQPRIO_ENABLE and HCLGE_FLAG_DCB_ENABLE
net: hns3: don't rollback when destroy mqprio fail
net: hns3: remove tc enable checking
net: hns3: do not allow call hns3_nic_net_open repeatedly
ixgbe: Fix NULL pointer dereference in ixgbe_xdp_setup
net: bridge: mcast: Associate the seqcount with its protecting lock.
net: mdio-ipq4019: Fix the error for an optional regs resource
net: hns3: fix hclge_dbg_dump_tm_pg() stack usage
net: mdio: mscc-miim: Fix the mdio controller
af_unix: Return errno instead of NULL in unix_create1().
...
The kvm_vm_free() statement here is currently dead code, since the loop
in front of it can only be left with the "goto done" that jumps right
after the kvm_vm_free(). Fix it by swapping the locations of the "done"
label and the kvm_vm_free().
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210826074928.240942-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_MAX_VCPU_ID is not specifying the highest allowed vcpu-id, but the
number of allowed vcpu-ids. This has already led to confusion, so
rename KVM_MAX_VCPU_ID to KVM_MAX_VCPU_IDS to make its semantics more
clear
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210913135745.13944-3-jgross@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rework the CPU selection in the migration worker to ensure the specified
number of migrations are performed when the test iteslf is affined to a
subset of CPUs. The existing logic skips iterations if the target CPU is
not in the original set of possible CPUs, which causes the test to fail
if too many iterations are skipped.
==== Test Assertion Failure ====
rseq_test.c:228: i > (NR_TASK_MIGRATIONS / 2)
pid=10127 tid=10127 errno=4 - Interrupted system call
1 0x00000000004018e5: main at rseq_test.c:227
2 0x00007fcc8fc66bf6: ?? ??:0
3 0x0000000000401959: _start at ??:?
Only performed 4 KVM_RUNs, task stalled too much?
Calculate the min/max possible CPUs as a cheap "best effort" to avoid
high runtimes when the test is affined to a small percentage of CPUs.
Alternatively, a list or xarray of the possible CPUs could be used, but
even in a horrendously inefficient setup, such optimizations are not
needed because the runtime is completely dominated by the cost of
migrating the task, and the absolute runtime is well under a minute in
even truly absurd setups, e.g. running on a subset of vCPUs in a VM that
is heavily overcommited (16 vCPUs per pCPU).
Fixes: 61e52f1630 ("KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs")
Reported-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210929234112.1862848-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Daniel Borkmann says:
====================
pull-request: bpf 2021-09-28
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 14 day(s) which contain
a total of 11 files changed, 139 insertions(+), 53 deletions(-).
The main changes are:
1) Fix MIPS JIT jump code emission for too large offsets, from Piotr Krysiuk.
2) Fix x86 JIT atomic/fetch emission when dst reg maps to rax, from Johan Almbladh.
3) Fix cgroup_sk_alloc corner case when called from interrupt, from Daniel Borkmann.
4) Fix segfault in libbpf's linker for objects without BTF, from Kumar Kartikeya Dwivedi.
5) Fix bpf_jit_charge_modmem for applications with CAP_BPF, from Lorenz Bauer.
6) Fix return value handling for struct_ops BPF programs, from Hou Tao.
7) Various fixes to BPF selftests, from Jiri Benc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
,
When building bpf selftest with make -j, I'm randomly getting build failures
such as this one:
In file included from progs/bpf_flow.c:19:
[...]/tools/testing/selftests/bpf/tools/include/bpf/bpf_helpers.h:11:10: fatal error: 'bpf_helper_defs.h' file not found
#include "bpf_helper_defs.h"
^~~~~~~~~~~~~~~~~~~
The file that fails the build varies between runs but it's always in the
progs/ subdir.
The reason is a missing make dependency on libbpf for the .o files in
progs/. There was a dependency before commit 3ac2e20fba but that commit
removed it to prevent unneeded rebuilds. However, that only works if libbpf
has been built already; the 'wildcard' prerequisite does not trigger when
there's no bpf_helper_defs.h generated yet.
Keep the libbpf as an order-only prerequisite to satisfy both goals. It is
always built before the progs/ objects but it does not trigger unnecessary
rebuilds by itself.
Fixes: 3ac2e20fba ("selftests/bpf: BPF object files should depend only on libbpf headers")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/ee84ab66436fba05a197f952af23c98d90eb6243.1632758415.git.jbenc@redhat.com
