Updates for v6.9:
Core:
- Correct bindings for MSM8976 and SM8650 platforms
- Start migration of MDP5 platforms to DPU driver
- X1E80100 MDSS support
DPU:
- Improve DSC allocation, fixing several important corner cases
- Add support for SDM630/SDM660 platforms
- Simplify dpu_encoder_phys_ops
- Apply fixes targeting DSC support with a single DSC encoder
- Apply fixes for HCTL_EN timing configuration
- X1E80100 support
DP:
- Refactor parser and power submodules
DSI:
- Clean up obsolete set_split_display support
- Update DSC documentation
MDP5:
- Clean up obsolete set_split_display support
GPU:
- fix sc7180 UBWC config
- fix a7xx LLC config
- new gpu support: a305B, a750, a702
- machine support: SM7150 (different power levels than other a618)
- a7xx devcoredump support
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtCq=CObbqKNOswWZdPw5dL8jq8BxD_hxP7kOCePUwNrg@mail.gmail.com
Nouveau deallocates a few buffers post GPU init which are required for GPU suspend/resume to function correctly.
This is likely not as big an issue on systems where the NVGPU is the only GPU, but on multi-GPU set ups it leads to a regression where the kernel module errors and results in a system-wide rendering freeze.
This commit addresses that regression by moving the two buffers required for suspend and resume to be deallocated at driver unload instead of post init.
Fixes: 042b5f8384 ("drm/nouveau: fix several DMA buffer leaks")
Signed-off-by: Sid Pranjale <sidpranjale127@protonmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Turns out usage is always in bytes not shifted.
Fixes: 72fa02fdf8 ("nouveau: add an ioctl to report vram usage")
Signed-off-by: Dave Airlie <airlied@redhat.com>
UAPI Changes:
- A couple of tracepoint updates from Priyanka and Lucas.
- Make sure BINDs are completed before accepting UNBINDs on LR vms.
- Don't arbitrarily restrict max number of batched binds.
- Add uapi for dumpable bos (agreed on IRC).
- Remove unused uapi flags and a leftover comment.
Driver Changes:
- A couple of fixes related to the execlist backend.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZeCBg4MA2hd1oggN@fedora
A reset fix for host1x, a resource leak fix and a probe fix for aux-hpd,
a use-after-free fix and a boot fix for a pmic_glink qcom driver in
drivers/soc, a fix for the simpledrm/tegra transition, a kunit fix for
the TTM tests, a font handling fix for fbcon, two allocation fixes and a
kunit test to cover them for drm/buddy
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240229-angelic-adorable-teal-fbfabb@houat
After 4020c22802 ("drm/amdgpu: don't runtime suspend if there are
displays attached (v3)"), "ret" is unconditionally set later before being
used, so there's point in initializing it and the associated comment is no
longer meaningful.
Remove the comment and the unnecessary initialization.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's possible that mtk_crtc->event is NULL in
mtk_drm_crtc_finish_page_flip().
pending_needs_vblank value is set by mtk_crtc->event, but in
mtk_drm_crtc_atomic_flush(), it's is not guarded by the same
lock in mtk_drm_finish_page_flip(), thus a race condition happens.
Consider the following case:
CPU1 CPU2
step 1:
mtk_drm_crtc_atomic_begin()
mtk_crtc->event is not null,
step 1:
mtk_drm_crtc_atomic_flush:
mtk_drm_crtc_update_config(
!!mtk_crtc->event)
step 2:
mtk_crtc_ddp_irq ->
mtk_drm_finish_page_flip:
lock
mtk_crtc->event set to null,
pending_needs_vblank set to false
unlock
pending_needs_vblank set to true,
step 2:
mtk_crtc_ddp_irq ->
mtk_drm_finish_page_flip called again,
pending_needs_vblank is still true
//null pointer
Instead of guarding the entire mtk_drm_crtc_atomic_flush(), it's more
efficient to just check if mtk_crtc->event is null before use.
Fixes: 119f517362 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240223212404.3709690-1-hsinyi@chromium.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
clang complains about a nonsensical test on builds with a 32-bit phys_addr_t,
which means resizing will always fail:
drivers/gpu/drm/xe/xe_mmio.c:109:23: error: result of comparison of constant 4294967296 with expression of type 'resource_size_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
109 | root_res->start > 0x100000000ull)
| ~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~
Previously, BAR resize was always disallowed on 32-bit kernels, but
this apparently changed recently. Since 32-bit machines can in theory
support PAE/LPAE for large address spaces, this may end up useful,
so change the driver to shut up the warning but still work when
phys_addr_t/resource_size_t is 64 bit wide.
Fixes: 9a6e6c14bf ("drm/xe/mmio: Use non-atomic writeq/readq variant for 32b")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226124736.1272949-2-arnd@kernel.org
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit f5d3983366)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Mesa has been issuing a single bind operation per ioctl since xe.ko
changed to GPUVA due xe.ko bug #746. If I change Mesa to try again to
issue every single bind operation it can in the same ioctl, it hits
the MAX_BINDS assertion when running Vulkan conformance tests.
Test dEQP-VK.sparse_resources.transfer_queue.3d.rgba32i.1024_128_8
issues 960 bind operations in a single ioctl, it's the most I could
find in the conformance suite.
I don't see a reason to keep the MAX_BINDS restriction: it doesn't
seem to be preventing any specific issue. If the number is too big for
the memory allocations, then those will fail. Nothing related to
num_binds seems to be using the stack. Let's just get rid of it.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Testcase: dEQP-VK.sparse_resources.transfer_queue.3d.rgba32i.1024_128_8
References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/746
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240215005353.1295420-1-paulo.r.zanoni@intel.com
(cherry picked from commit ba6bbdc6ea)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Those cases missed in previous uAPI cleanups were mostly accidentally
brought in from i915 or created to exercise the possibilities of gpuvm
but they are not used by userspace yet, so let's remove them. They can
still be brought back later if needed.
v2:
- Fix XE_VM_FLAG_FAULT_MODE support in xe_lrc.c (Brian Welty)
- Leave DRM_XE_VM_BIND_OP_UNMAP_ALL (José Roberto de Souza)
- Ensure invalid flag values are rejected (Rodrigo Vivi)
v3: Rebase after removal of persistent exec_queues (Francois Dugast)
v4: Rodrigo: Rebase after the new dumpable flag.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222232356.175431-1-rodrigo.vivi@intel.com
(cherry picked from commit 84a1ed5e67)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The adev can be found from bo by amdgpu_ttm_adev(bo->tbo.bdev),
and adev is also not used in the function
amdgpu_amdkfd_map_gtt_bo_to_gart().
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix mask used for esm ctrl register to get pcie link
speed on smu_v11_0_3, smu_v13_0_2 & smu_v13_0_6
Fixes: 511a95552e ("drm/amd/pm: Add SMU 13.0.6 support")
Fixes: c05d1c4015 ("drm/amd/swsmu: add aldebaran smu13 ip support (v3)")
Fixes: f1c3785931 ("drm/amd/powerplay: add Arcturus support for gpu metrics export")
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1:
enabel pp_od_clk_voltage node for gfx 9.4.3 SRIOV and BM.
v2:
add onevf check for gfx 9.4.3
v3:
refine code check order to make function clearly.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If an eDP panel is not powered on then any attempts to talk to it over
the DP AUX channel will timeout. Unfortunately these attempts may be
quite slow. Userspace can initiate these attempts either via a
/dev/drm_dp_auxN device or via the created i2c device.
Making the DP AUX drivers timeout faster is a difficult proposition.
In theory we could just poll the panel's HPD line in the AUX transfer
function and immediately return an error there. However, this is
easier said than done. For one thing, there's no hard requirement to
hook the HPD line up for eDP panels and it's OK to just delay a fixed
amount. For another thing, the HPD line may not be fast to probe. On
parade-ps8640 we need to wait for the bridge chip's firmware to boot
before we can get the HPD line and this is a slow process.
The fact that the transfers are taking so long to timeout is causing
real problems. The open source fwupd daemon sometimes scans DP busses
looking for devices whose firmware need updating. If it happens to
scan while a panel is turned off this scan can take a long time. The
fwupd daemon could try to be smarter and only scan when eDP panels are
turned on, but we can also improve the behavior in the kernel.
Let's let eDP panels drivers specify that a panel is turned off and
then modify the common AUX transfer code not to attempt a transfer in
this case.
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Eizan Miyamoto <eizan@chromium.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202141109.1.I24277520ac754ea538c9b14578edc94e1df11b48@changeid
The drm_buddy_test's alloc_contiguous test used a u64 for the page size,
which was then updated to be an 'unsigned long' to avoid 64-bit
multiplication division helpers.
However, the variable is logged by some KUNIT_ASSERT_EQ_MSG() using the
'%d' or '%llu' format specifiers, the former of which is always wrong,
and the latter is no longer correct now that ps is no longer a u64. Fix
these to all use '%lu'.
Also, drm_mm_test calls KUNIT_FAIL() with an empty string as the
message. gcc and clang warns if a printf format string is empty, so
give these some more detailed error messages, which should be more
useful anyway.
Fixes: a64056bb5a ("drm/tests/drm_buddy: add alloc_contiguous test")
Fixes: fca7526b7d ("drm/tests/drm_buddy: fix build failure on 32-bit targets")
Fixes: fc8d29e298 ("drm: selftest: convert drm_mm selftest to KUnit")
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
