'input-disable' is already used and supported by common pinctrl
bindings, so add it also here to fix warnings like:
arch/arm64/boot/dts/qcom/qrb5165-rb5.dtb: gpio@c000: lt9611-rst-state: 'oneOf' conditional failed, one must be fixed:
'input-disable' does not match any of the regexes: 'pinctrl-[0-9]+'
'function', 'input-disable', 'output-high', 'pins', 'power-source' do not match any of the regexes: '(pinconf|-pins)$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220507194913.261121-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Matching PMIC GPIOs config nodes within a '-state' node by '.*' pattern
does not work as expected because of linux,phandle in the DTB:
arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dtb: gpios@c000: divclk4-state: 'oneOf' conditional failed, one must be fixed:
'pins' is a required property
'function' is a required property
'pinconf' does not match any of the regexes: 'pinctrl-[0-9]+'
[[2]] is not of type 'object'
Make the schema stricter and expect such nodes to be either named
'pinconfig' or followed with '-pins' prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220507194913.261121-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
SeongJae is currently listed as a contact point for some blk{back,front}
features, but he will not work for XEN for a while. This commit
therefore updates the contact point to his colleague, Maximilian, who is
understanding the context and actively working with the features now.
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20220420072734.1692-1-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Add VTM bindings documentation. In the Voltage Thermal
Management Module(VTM), K3 J72XX supplies a voltage
reference and a temperature sensor feature that are gathered in the band
gap voltage and temperature sensor (VBGAPTS) module. The band
gap provides current and voltage reference for its internal
circuits and other analog IP blocks. The analog-to-digital
converter (ADC) produces an output value that is proportional
to the silicon temperature.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220517172920.10857-2-j-keerthy@ti.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The ADIN1300 supports generating certain clocks on its GP_CLK pin, as
well as providing the reference clock on CLK25_REF.
Add DT properties to configure both pins.
Technically the phy also supports a recovered 125MHz clock for
synchronous ethernet. However SyncE should be configured dynamically at
runtime, so it is explicitly omitted in this binding.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull ARM SoC fixes from Arnd Bergmann:
"The SoC bug fixes have calmed down sufficiently, there is one minor
update for the MAINTAINERS file, and few bug fixes for dts
descriptions:
- Updates to the BananaPi R2-Pro (rk3568) dts to match production
hardware rather than the prototype version.
- Qualcomm sm8250 soundwire gets disabled on some machines to avoid
crashes
- A number of aspeed SoC specific fixes, addressing incorrect pin
cotrol settings, some values in the romed8hm board, and a revert
for an accidental removal of a DT node"
* 'arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: omap: remove me as a maintainer
ARM: dts: aspeed: Add video engine to g6
ARM: dts: aspeed: romed8hm3: Fix GPIOB0 name
ARM: dts: aspeed: romed8hm3: Add lm25066 sense resistor values
ARM: dts: aspeed-g6: fix SPI1/SPI2 quad pin group
ARM: dts: aspeed-g6: add FWQSPI group in pinctrl dtsi
dt-bindings: pinctrl: aspeed-g6: add FWQSPI function/group
pinctrl: pinctrl-aspeed-g6: add FWQSPI function-group
dt-bindings: pinctrl: aspeed-g6: remove FWQSPID group
pinctrl: pinctrl-aspeed-g6: remove FWQSPID group in pinctrl
ARM: dts: aspeed-g6: remove FWQSPID group in pinctrl dtsi
arm64: dts: qcom: sm8250: don't enable rx/tx macro by default
arm64: dts: rockchip: Add gmac1 and change network settings of bpi-r2-pro
arm64: dts: rockchip: Change io-domains of bpi-r2-pro
Pull devfreq changes for 5.19-rc1 from Chanwoo Choi:
"1. Update devfreq core
- Add cpu based scaling support to passive governor. Some device like
cache might require the dynamic frequency scaling. But, it has very
tightly to cpu frequency. So that use passive governor to scale
the frequency according to current cpu frequency.
To decide the frequency of the device, the governor does one of the following:
: Derives the optimal devfreq device opp from required-opps property of
the parent cpu opp_table.
: Scales the device frequency in proportion to the CPU frequency. So, if
the CPUs are running at their max frequency, the device runs at its
max frequency. If the CPUs are running at their min frequency, the
device runs at its min frequency. It is interpolated for frequencies
in between.
2. Update devfreq drivers
- Update rk3399_dmc.c as following:
: Convert dt-binding document to YAML and deprecate unused properties.
: Use Hz units for the device-tree properties of rk3399_dmc.
: rk3399_dmc is able to set the idle time before changing the dmc clock.
Specify idle time parameters by using nano-second unit on dt bidning.
: Add new disable-freq properties to optimize the power-saving feature
of rk3399_dmc.
: Disable devfreq-event device on remove() to fix unbalanced
enable-disable count.
: Use devm_pm_opp_of_add_table()
: Block PMU (Power-Management Unit) transitions when scaling frequency
by ARM Trust Firmware in order to fix the conflict between PMU and DMC
(Dynamic Memory Controller)."
* tag 'devfreq-next-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux:
PM / devfreq: passive: Keep cpufreq_policy for possible cpus
PM / devfreq: passive: Reduce duplicate code when passive_devfreq case
PM / devfreq: Add cpu based scaling support to passive governor
PM / devfreq: Export devfreq_get_freq_range symbol within devfreq
PM / devfreq: rk3399_dmc: Block PMU during transitions
soc: rockchip: power-domain: Manage resource conflicts with firmware
PM / devfreq: rk3399_dmc: Avoid static (reused) profile
PM / devfreq: rk3399_dmc: Use devm_pm_opp_of_add_table()
PM / devfreq: rk3399_dmc: Disable edev on remove()
PM / devfreq: rk3399_dmc: Support new *-ns properties
PM / devfreq: rk3399_dmc: Support new disable-freq properties
PM / devfreq: rk3399_dmc: Use bitfield macro definitions for ODT_PD
PM / devfreq: rk3399_dmc: Drop excess timing properties
PM / devfreq: rk3399_dmc: Drop undocumented ondemand DT props
dt-bindings: devfreq: rk3399_dmc: Add more disable-freq properties
dt-bindings: devfreq: rk3399_dmc: Specify idle params in nanoseconds
dt-bindings: devfreq: rk3399_dmc: Fix Hz units
dt-bindings: devfreq: rk3399_dmc: Deprecate unused/redundant properties
dt-bindings: devfreq: rk3399_dmc: Convert to YAML
Add support for the HPE GXP Timer and Watchdog. There are multiple
timers on the SoC but only one is enabled at this time.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
When the binding was converted it appeared necessary to set
'unevaluatedProperties: true' because of the switch devices on the
turris-mox board. Actually the error was because of the reg property
being incorrect causing the rest of the properties to be unevaluated.
After the reg properties are fixed for turris-mox we can set
'unevaluatedProperties: false' as is generally expected.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This contains a few fixes for the sc8180x interconnect provider driver to make
it functional.
* icc-sc8180x
dt-bindings: interconnect: Add SC8180X QUP0 virt provider
interconnect: qcom: sc8180x: Modernize sc8180x probe
interconnect: qcom: sc8180x: Fix QUP0 nodes
interconnect: qcom: sc8180x: Mark some BCMs keepalive
Link: https://lore.kernel.org/r/20220503211925.1022169-1-bjorn.andersson@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
It turns out that networking.pdf has exceeded 100 chapters and
titles of chapters >= 100 collide with their counts in its table
of contents (TOC).
Increase relevant params by 0.6em in the preamble to avoid such
ugly collisions.
While at it, fix a typo in comment (subsection).
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/bdb60ba3-7813-47d0-74f9-7c31dd912d95@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
To enable NFSv4 to work correctly, NFSv4 client identifiers have
to be globally unique and persistent over client reboots. We
believe that in many cases, a good default identifier can be
chosen and set when a client system is imaged.
Because there are many different ways a system can be imaged,
provide an explanation of how NFSv4 client identifiers and
principals can be set by install scripts and imaging tools.
Additional cases, such as NFSv4 clients running in containers, also
need unique and persistent identifiers. The Linux NFS community
sets forth this explanation to aid those who create and manage
container environments.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The documentation for nfs4_unique_id is out-of-date. In particular it
claim that when nfs4_unique_id is set, the host name is not used. since
Commit 55b592933b ("NFSv4: Fix nfs4_init_uniform_client_string for net
namespaces") both the unique_id AND the host name are used.
Update the documentation to match the code.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the ChromeOS board is a detachable, this cros-ec-keyb device won't
have a matrix keyboard but it may have some button switches, e.g. volume
buttons and power buttons. The driver still registers a keyboard though
and that leads to userspace confusion around where the keyboard is.
We tried to work around this by only registering the keyboard device when
rows/columns properties were specified for the device, but that led to
another problem where removing the rows/columns properties breaks the
existing binding. Technically before that commit the rows/columns
properties were required, otherwise the driver would fail to probe.
Removing the properties from devicetrees makes the driver fail to probe
unless the corresponding driver patch is present. Furthermore, this makes
requiring matrix keyboard properties for devices that really have a
keyboard impossible because the compatible drives the schema and now the
properties are optional.
Add a more specific compatible for this type of device that indicates to
the OS that there are only switches and no matrix keyboard present.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220516183452.942008-2-swboyd@chromium.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
