This change adds another type-based self-test that specifically aims to
test some more characteristics of the TYPE_MATCH logic. Specifically, it
covers a few more potential differences between types, such as different
orders, enum variant values, and integer signedness.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220628160127.607834-9-deso@posteo.net
Now that we have type-match logic in both libbpf and the kernel, this
change adjusts the existing BPF self tests to check this functionality.
Specifically, we extend the existing type-based tests to check the
previously introduced bpf_core_type_matches macro.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220628160127.607834-8-deso@posteo.net
When packets are not received, they aren't received on $host1_if, so the
message talking about the second host not receiving them is incorrect.
Fix it.
Fixes: d4deb01467 ("selftests: forwarding: Add a test for FDB learning")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The first host interface has by default no interest in receiving packets
MAC DA de:ad:be:ef:13:37, so it might drop them before they hit the tc
filter and this might confuse the selftest.
Enable promiscuous mode such that the filter properly counts received
packets.
Fixes: d4deb01467 ("selftests: forwarding: Add a test for FDB learning")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As mentioned in the blamed commit, flood_unicast_test() works by
checking the match count on a tc filter placed on the receiving
interface.
But the second host interface (host2_if) has no interest in receiving a
packet with MAC DA de:ad:be:ef:13:37, so its RX filter drops it even
before the ingress tc filter gets to be executed. So we will incorrectly
get the message "Packet was not flooded when should", when in fact, the
packet was flooded as expected but dropped due to an unrelated reason,
at some other layer on the receiving side.
Force h2 to accept this packet by temporarily placing it in promiscuous
mode. Alternatively we could either deliver to its MAC address or use
tcpdump_start, but this has the fewest complications.
This fixes the "flooding" test from bridge_vlan_aware.sh and
bridge_vlan_unaware.sh, which calls flood_test from the lib.
Fixes: 236dd50bf6 ("selftests: forwarding: Add a test for flooded traffic")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch add a test that checks connect()ivity between two sockets:
unnamed socket -> bound socket
* SOCK_STREAM or SOCK_DGRAM
* pathname or abstract
* same or different netns
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add and use functions and macros for printing verbose testing output.
If the Memblock simulator was compiled with VERBOSE=1:
- prefix_push(): appends the given string to a prefix string that will be
printed in test_fail() and test_pass*().
- prefix_pop(): removes the last prefix from the prefix string.
- prefix_reset(): clears the prefix string.
- test_fail(): prints a message after a test fails containing the test
number of the failing test and the prefix.
- test_pass(): prints a message after a test passes containing its test
number and the prefix.
- test_print(): prints the given formatted output string.
- test_pass_pop(): runs test_pass() followed by prefix_pop().
- PREFIX_PUSH(): runs prefix_push(__func__).
If the Memblock simulator was not compiled with VERBOSE=1, these
functions/macros do nothing.
Add the assert wrapper macros ASSERT_EQ(), ASSERT_NE(), and ASSERT_LT().
If the assert condition fails, these macros call test_fail() before
executing assert().
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Shaoqin Huang <shaoqin.huang@intel.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/f234d443fe154d5ae8d8aa07284aff69edfb6f61.1656907314.git.remckee0@gmail.com
Add VERBOSE and MEMBLOCK_DEBUG user-provided arguments. VERBOSE will
enable verbose output from Memblock simulator. MEMBLOCK_DEBUG will enable
memblock_dbg() messages.
Update the help message to include VERBOSE and MEMBLOCK_DEBUG. Update
the README to include VERBOSE. The README does not include all available
options and refers to the help message for the remaining options.
Therefore, omit MEMBLOCK_DEBUG from README.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/5503f3efe82ecef5c99961a1d53003c8ad06cf27.1656907314.git.remckee0@gmail.com
Tests that permanent mdb entries can be added/deleted on ports with state down.
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test va_128TBswitch.c expects to be able to pass mmap an address hint
and length that cross the address 1<<47. On x86_64, this is not possible
without 5-level page tables, so the test fails.
The test is already only run on 64-bit powerpc and x86_64 archs, but this
patch adds an additional check on x86_64 that skips the test if
PG_TABLE_LEVELS < 5. There is precedent for checking /proc/config.gz in
selftests, e.g. in selftests/firmware.
Running the tests produces the desired output:
sudo make -C tools/testing/selftests TARGETS=vm run_tests
---------------------------
running ./va_128TBswitch.sh
---------------------------
./va_128TBswitch.sh: PG_TABLE_LEVELS=4, must be >= 5 to run this test
[SKIP]
-------------------------------
[adam@wowsignal.io: restrict the check to x86_64]
Link: https://lkml.kernel.org/r/20220628163654.337600-1-adam@wowsignal.io
[adam@wowsignal.io: fix formatting issues, rename "die" to "fail"]
Link: https://lkml.kernel.org/r/20220701163030.415735-1-adam@wowsignal.io
Link: https://lkml.kernel.org/r/20220627163912.5581-1-adam@wowsignal.io
Signed-off-by: Adam Sindelar <adam@wowsignal.io>
Cc: Adam Sindelar <ats@fb.com>
Cc: David Vernet <void@manifault.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
On Android this test is getting stuck in an infinite loop due to
indeterminate behavior:
The local variables steps and signalled were being reset to 1 and 0
respectively after every jump back to sigsetjmp by siglongjmp in the
signal handler. The test was incrementing them and expecting them to
retain their incremented values. The documentation for siglongjmp says:
All accessible objects have values as of the time sigsetjmp() was called,
except that the values of objects of automatic storage duration which are
local to the function containing the invocation of the corresponding
sigsetjmp() which do not have volatile-qualified type and which are
changed between the sigsetjmp() invocation and siglongjmp() call are
indeterminate.
Tagging steps and signalled with volatile enabled the test to pass.
Link: https://lkml.kernel.org/r/20220613233321.431282-1-edliaw@google.com
Signed-off-by: Edward Liaw <edliaw@google.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Global variables do not need to be initialized to 0 and checkpatch
flags this error in tools/testing/selftests/timers/alarmtimer-suspend.c:
ERROR: do not initialise globals to 0
+int final_ret = 0;
Fix this checkpatch error.
Signed-off-by: Zan Aziz <zanaziz313@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Daniel Borkmann says:
====================
pull-request: bpf 2022-07-02
We've added 7 non-merge commits during the last 14 day(s) which contain
a total of 6 files changed, 193 insertions(+), 86 deletions(-).
The main changes are:
1) Fix clearing of page contiguity when unmapping XSK pool, from Ivan Malov.
2) Two verifier fixes around bounds data propagation, from Daniel Borkmann.
3) Fix fprobe sample module's parameter descriptions, from Masami Hiramatsu.
4) General BPF maintainer entry revamp to better scale patch reviews.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, selftests: Add verifier test case for jmp32's jeq/jne
bpf, selftests: Add verifier test case for imm=0,umin=0,umax=1 scalar
bpf: Fix insufficient bounds propagation from adjust_scalar_min_max_vals
bpf: Fix incorrect verifier simulation around jmp32's jeq/jne
xsk: Clear page contiguity bit when unmapping pool
bpf, docs: Better scale maintenance of BPF subsystem
fprobe, samples: Add module parameter descriptions
====================
Link: https://lore.kernel.org/r/20220701230121.10354-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test case to trigger the verifier's incorrect conclusion in the
case of jmp32's jeq/jne. Also here, make use of dead code elimination,
so that we can see the verifier bailing out on unfixed kernels.
Before:
# ./test_verifier 724
#724/p jeq32/jne32: bounds checking FAIL
Failed to load prog 'Permission denied'!
R4 !read_ok
verification time 8 usec
stack depth 0
processed 8 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 0
Summary: 0 PASSED, 0 SKIPPED, 1 FAILED
After:
# ./test_verifier 724
#724/p jeq32/jne32: bounds checking OK
Summary: 1 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220701124727.11153-4-daniel@iogearbox.net
Add a test case to trigger the constant scalar issue which leaves the
register in scalar(imm=0,umin=0,umax=1,var_off=(0x0; 0x0)) state. Make
use of dead code elimination, so that we can see the verifier bailing
out on unfixed kernels. For the condition, we use jle given it checks
on umax bound.
Before:
# ./test_verifier 743
#743/p jump & dead code elimination FAIL
Failed to load prog 'Permission denied'!
R4 !read_ok
verification time 11 usec
stack depth 0
processed 13 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 1
Summary: 0 PASSED, 0 SKIPPED, 1 FAILED
After:
# ./test_verifier 743
#743/p jump & dead code elimination OK
Summary: 1 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220701124727.11153-3-daniel@iogearbox.net
parsing and usage of -t got missed in the previous patch.
this patch fixes it
Fixes: 816cda9ae5 ("selftests: net: fib_rule_tests: add support to select a test to run")
Signed-off-by: Alaa Mohamed <eng.alaamohamedsoliman.am@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/microchip/sparx5/sparx5_switchdev.c
9c5de246c1 ("net: sparx5: mdb add/del handle non-sparx5 devices")
fbb89d02e3 ("net: sparx5: Allow mdb entries to both CPU and ports")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Current release - new code bugs:
- clear msg_get_inq in __sys_recvfrom() and __copy_msghdr_from_user()
- mptcp:
- invoke MP_FAIL response only when needed
- fix shutdown vs fallback race
- consistent map handling on failure
- octeon_ep: use bitwise AND
Previous releases - regressions:
- tipc: move bc link creation back to tipc_node_create, fix NPD
Previous releases - always broken:
- tcp: add a missing nf_reset_ct() in 3WHS handling to prevent socket
buffered skbs from keeping refcount on the conntrack module
- ipv6: take care of disable_policy when restoring routes
- tun: make sure to always disable and unlink NAPI instances
- phy: don't trigger state machine while in suspend
- netfilter: nf_tables: avoid skb access on nf_stolen
- asix: fix "can't send until first packet is send" issue
- usb: asix: do not force pause frames support
- nxp-nci: don't issue a zero length i2c_master_read()
Misc:
- ncsi: allow use of proper "mellanox" DT vendor prefix
- act_api: add a message for user space if any actions were already
flushed before the error was hit"
* tag 'net-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits)
net: dsa: felix: fix race between reading PSFP stats and port stats
selftest: tun: add test for NAPI dismantle
net: tun: avoid disabling NAPI twice
net: sparx5: mdb add/del handle non-sparx5 devices
net: sfp: fix memory leak in sfp_probe()
mlxsw: spectrum_router: Fix rollback in tunnel next hop init
net: rose: fix UAF bugs caused by timer handler
net: usb: ax88179_178a: Fix packet receiving
net: bonding: fix use-after-free after 802.3ad slave unbind
ipv6: fix lockdep splat in in6_dump_addrs()
net: phy: ax88772a: fix lost pause advertisement configuration
net: phy: Don't trigger state machine while in suspend
usbnet: fix memory allocation in helpers
selftests net: fix kselftest net fatal error
NFC: nxp-nci: don't print header length mismatch on i2c error
NFC: nxp-nci: Don't issue a zero length i2c_master_read()
net: tipc: fix possible refcount leak in tipc_sk_create()
nfc: nfcmrvl: Fix irq_of_parse_and_map() return value
net: ipv6: unexport __init-annotated seg6_hmac_net_init()
ipv6/sit: fix ipip6_tunnel_get_prl return value
...
Currently, xsk_socket__delete frees BPF resources regardless of ctx
refcount. Xdpxceiver has a test to verify whether underlying BPF
resources would not be wiped out after closing XSK socket that was
bound to interface with other active sockets. From library's xsk part
perspective it also means that the internal xsk context is shared and
its refcount is bumped accordingly.
After a switch to loading XDP prog based on previously opened XSK
socket, mentioned xdpxceiver test fails with:
not ok 16 [xdpxceiver.c:swap_xsk_resources:1334]: ERROR: 9/"Bad file descriptor
which means that in swap_xsk_resources(), xsk_socket__delete() released
xskmap which in turn caused a failure of xsk_socket__update_xskmap().
To fix this, when deleting socket, decrement ctx refcount before
releasing BPF resources and do so only when refcount dropped to 0 which
means there are no more active sockets for this ctx so BPF resources can
be freed safely.
Fixes: 2f6324a393 ("libbpf: Support shared umems between queues and devices")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220629143458.934337-5-maciej.fijalkowski@intel.com
Currently, xsk_setup_xdp_prog() uses anonymous xsk_socket struct which
means that during xsk_create_bpf_link() call, xsk->config.xdp_flags is
always 0. This in turn means that from xdpxceiver it is impossible to
use xdpgeneric attachment, so since commit 3b22523bca ("selftests,
xsk: Fix bpf_res cleanup test") we were not testing SKB mode at all.
To fix this, introduce a function, called xsk_setup_xdp_prog_xsk(), that
will load XDP prog based on the existing xsk_socket, so that xsk
context's refcount is correctly bumped and flags from application side
are respected. Use this from xdpxceiver side so we get coverage of
generic and native XDP program attach points.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220629143458.934337-3-maciej.fijalkowski@intel.com
Currently bpf_link probe is done for each call of xsk_socket__create().
For cases where xsk context was previously created and current socket
creation uses it, has_bpf_link will be overwritten, where it has already
been initialized.
Optimize this by moving the query to the xsk_create_ctx() so that when
xsk_get_ctx() finds a ctx then no further bpf_link probes are needed.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220629143458.934337-2-maciej.fijalkowski@intel.com
Now that bpftool is able to produce a list of known program, map, attach
types, let's use as much of this as we can in the bash completion file,
so that we don't have to expand the list each time a new type is added
to the kernel.
Also update the relevant test script to remove some checks that are no
longer needed.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Müller <deso@posteo.net>
Link: https://lore.kernel.org/bpf/20220629203637.138944-3-quentin@isovalent.com
The incorrect path is causing the following error when trying to run net
kselftests:
In file included from bpf/nat6to4.c:43:
../../../lib/bpf/bpf_helpers.h:11:10: fatal error: 'bpf_helper_defs.h' file not found
^~~~~~~~~~~~~~~~~~~
1 error generated.
Fixes: cf67838c44 ("selftests net: fix bpf build error")
Signed-off-by: Coleman Dietsch <dietschc@csp.edu>
Link: https://lore.kernel.org/r/20220628174744.7908-1-dietschc@csp.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, this script sets up the test scenario, which is supposed to end
in an inability of the system to negotiate a link. It then waits for a bit,
and verifies that the system can diagnose why the link was not established.
The wait time for the scenario where different link speeds are forced on
the two ends of a loopback cable, was set to 4 seconds, which exactly
covered it. As of a recent mlxsw firmware update, this time gets longer,
and this test starts failing.
The time that selftests currently wait for links to be established is
currently $WAIT_TIMEOUT, or 20 seconds. It seems reasonable that if this is
the time necessary to establish and bring up a link, it should also be
enough to determine that a link cannot be established and why.
Therefore in this patch, convert the sleeps to busywaits, so that if a
failure is established sooner (as is expected), the test runs quicker. And
use $WAIT_TIMEOUT as the time to wait.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This failing signature:
[ 8.392669] cxl_bus_probe: cxl_port endpoint2: probe: 970997760
[ 8.392670] cxl_port: probe of endpoint2 failed with error 970997760
[ 8.392719] create_endpoint: cxl_mem mem0: add: endpoint2
[ 8.392721] cxl_mem mem0: endpoint2 failed probe
[ 8.392725] cxl_bus_probe: cxl_mem mem0: probe: -6
...shows cxl_hdm_decode_init() resulting in a return code ("970997760")
that looks like stack corruption. The problem goes away if
cxl_hdm_decode_init() is not mocked via __wrap_cxl_hdm_decode_init().
The corruption results from the mismatch that the calling convention for
cxl_hdm_decode_init() is:
int cxl_hdm_decode_init(struct cxl_dev_state *cxlds, struct cxl_hdm *cxlhdm)
...and __wrap_cxl_hdm_decode_init() is:
bool __wrap_cxl_hdm_decode_init(struct cxl_dev_state *cxlds, struct cxl_hdm *cxlhdm)
...i.e. an int is expected but __wrap_hdm_decode_init() returns bool.
Fix the convention and cleanup the organization to match
__wrap_cxl_await_media_ready() as the difference was a red herring that
distracted from finding the bug.
Fixes: 92804edb11 ("cxl/pci: Drop @info argument to cxl_hdm_decode_init()")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Link: https://lore.kernel.org/r/165603870776.551046.8709990108936497723.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In a few MPTCP selftest tools, gcc 12 complains that the 'sock' variable
might be used uninitialized. This is a false positive because the only
code path that could lead to uninitialized access is where getaddrinfo()
fails, but the local xgetaddrinfo() wrapper exits if such a failure
occurs.
Initialize the 'sock' variable anyway to allow the tools to build with
gcc 12.
Fixes: 048d19d444 ("mptcp: add basic kselftest for mptcp")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mentioned test-case still use an hard-coded-len sleep to
wait for a relative large number of connection to be established.
On very slow VM and with debug build such timeout could be exceeded,
causing failures in our CI.
Address the issue polling for the expected condition several times,
up to an unreasonable high amount of time. On reasonably fast system
the self-tests will be faster then before, on very slow one we will
still catch the correct condition.
Fixes: df62f2ec3d ("selftests/mptcp: add diag interface tests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The testcase checks if the transalation of a generic hardware cache
event is done properly via perf interface. The hardware cache events has
type as PERF_TYPE_HW_CACHE and each event points to raw event code id.
Testcase checks different combination of cache level, cache event
operation type and cache event result type and verify for a given event
code, whether transalation matches with the current cache event mappings
via perf interface.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-36-atrajeev@linux.vnet.ibm.com
Thresh select bits in the event code is used to program thresh_sel field
in Monitor Mode Control Register A (MMCRA: 45-47). When scheduling
events as a group, all events in that group should match value in these
bits. Otherwise event open for the sibling events will fail.
Testcase uses event code PM_MRK_INST_CMPL (0x401e0) as leader and
another event PM_THRESH_MET (0x101ec) as sibling event, and checks if
group constraint checks for thresh_sel field added correctly via perf
interface.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-35-atrajeev@linux.vnet.ibm.com
Thresh control bits in the event code is used to program thresh_ctl
field in Monitor Mode Control Register A (MMCRA: 48-55). When scheduling
events as a group, all events in that group should match value in these
bits. Otherwise event open for the sibling events will fail.
Testcase uses event code PM_MRK_INST_CMPL (0x401e0) as leader and
another event PM_THRESH_MET (101ec) as sibling event, and checks if
group constraint checks for thresh_ctl field added correctly via perf
interface.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-34-atrajeev@linux.vnet.ibm.com
Unit and pmu bits in the event code is used to program unit and pmc
fields in Monitor Mode Control Register 1 (MMCR1). For power9 platform,
incase unit field value is within 6 to 9, one of the event in the group
should use PMC4. Otherwise event_open should fail for that group.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-33-atrajeev@linux.vnet.ibm.com
Thresh compare bits for a event is used to program thresh compare field
in Monitor Mode Control Register A (MMCRA: 9-18 bits for power9 and
MMCRA: 8-18 bits for power10). When scheduling events as a group, all
events in that group should match value in thresh compare bits.
Otherwise event open for the sibling events will fail.
Testcase uses event code "0x401e0" as leader and another event "0x101ec"
as sibling event, and checks for thresh compare constraint via perf
interface.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-32-atrajeev@linux.vnet.ibm.com
Data and instruction cache qualifier bits in the event code is used to
program cache select field in Monitor Mode Control Register 1 (MMCR1:
16-17). When scheduling events as a group, all events in that group
should match value in these bits. Otherwise event open for the sibling
events will fail.
Testcase uses event code "0x1100fc" as leader and other events like
"0x23e054" and "0x13e054" as sibling events to checks for l1 cache
select field constraints via perf interface.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-31-atrajeev@linux.vnet.ibm.com
In power10, L2L3 select bits in the event code is used to program
l2l3_sel field in Monitor Mode Control Register 0 (MMCR0: 56-60). When
scheduling events as a group, all events in that group should match
value in these bits. Otherwise event open for the sibling events will
fail.
Testcase uses event code "0x010000046080" as leader and another events
"0x26880" and "0x010000026880" as sibling events, and checks for
l2l3_sel constraints via perf interface for ISA v3.1 platform.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-30-atrajeev@linux.vnet.ibm.com
Testcase to ensure that using invalid event in generic event for
PERF_TYPE_HARDWARE will fail. Invalid generic events in power10 are:
- PERF_COUNT_HW_BUS_CYCLES
- PERF_COUNT_HW_STALLED_CYCLES_FRONTEND
- PERF_COUNT_HW_STALLED_CYCLES_BACKEND
- PERF_COUNT_HW_REF_CPU_CYCLES
Invalid generic events in power9 are:
- PERF_COUNT_HW_BUS_CYCLES
- PERF_COUNT_HW_REF_CPU_CYCLES
Testcase does event open for valid and invalid generic events to ensure
event open works for all valid events and fails for invalid events.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-29-atrajeev@linux.vnet.ibm.com
Platform specific PMU supports alternative event for some of the event
codes. During perf_event_open, it any event group doesn't match
constraint check criteria, further lookup is done to find alternative
event. Code checks to see if it is possible to schedule event as group
using alternative events.
Testcase exercises the alternative event find code for power10. Example,
Using PMC1 to PMC4 in a group and again trying to schedule
PM_CYC_ALT (0x0001e) will fail since this exceeds number of programmable
events in group. But since 0x600f4 is an alternative event for 0x0001e,
it is possible to use 0x0001e in the group. Testcase uses such
combination all events in power10 which has alternative event.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-28-atrajeev@linux.vnet.ibm.com
Platform specific PMU supports alternative event for some of the event
codes. During perf_event_open, it any event group doesn't match
constraint check criteria, further lookup is done to find alternative
event. Code checks to see if it is possible to schedule event as group
using alternative events.
Testcase exercises the alternative event find code for power9. Example,
since events in same PMC can't go in as a group, ideally using
PM_RUN_CYC_ALT (0x200f4) and PM_BR_TAKEN_CMPL (0x200fa) will fail. But
since RUN_CYC (0x600f4) is alternative event for 0x200f4, it is possible
to use 0x600f4 and 0x200fa as group. Testcase uses such combination for
all events in power9 which has an alternative event.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-27-atrajeev@linux.vnet.ibm.com
Some of the events are blacklisted in power9. The list of blacklisted
events are noted in power9-events-list.h When trying to do event open
for any of these blacklisted event will cause a failure. Testcase
ensures that using blacklisted events will cause event_open to fail in
power9. This test is only applicable on power9 DD2.1 and DD2.2 and hence
test adds checks to skip on other platforms.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-26-atrajeev@linux.vnet.ibm.com
