mlxsw selftests often invoke a bail_on_lldpad() helper to make sure LLDPAD
is not running, to prevent conflicts between the QoS configuration applied
through TC or DCB command line tool, and the DCB configuration that LLDPAD
might apply. This helper might be useful to others. Move the function to
lib.sh, and parameterize to make reusable in other contexts.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver-specific wrappers of these selftests invoke bail_on_lldpad to
make sure that LLDPAD doesn't trample the configuration. The function
bail_on_lldpad is going to move to lib.sh in the next patch. With that, it
won't be visible for the wrappers before sourcing the framework script. And
after sourcing it, it is too late: the selftest will have run by then.
One option might be to source NUM_NETIFS=0 lib.sh from the wrapper, but
even if that worked (it might, it might not), that seems cumbersome. lib.sh
is doing fair amount of stuff, and even if it works today, it does not look
particularly solid as a solution.
Instead, introduce a hook, sch_tbf_pre_hook(), that when available, gets
invoked. Move the bail to the hook.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Two test cases:
- "valid read map access into a read-only array 1" and
- "valid read map access into a read-only array 2"
Expect that map_array_ro map is filled with mock data. This logic was
not taken into acount during initial test conversion.
This commit modifies prog_tests/verifier.c entry point for this test
to fill the map.
Fixes: a3c830ae02 ("selftests/bpf: verifier/array_access.c converted to inline assembly")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230420232317.2181776-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When a test case is annotated with __retval tag the test_loader engine
would use libbpf's bpf_prog_test_run_opts() to do a test run of the
program and compare retvals.
This commit allows to perform arbitrary actions on bpf object right
before test loader invokes bpf_prog_test_run_opts(). This could be
used to setup some state for program execution, e.g. fill some maps.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230420232317.2181776-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Florian Westphal found a bug in and suggested a fix for test_loader.c
processing of __retval tag. Because of this bug the function
test_loader.c:do_prog_test_run() never executed and all __retval test
tags were ignored.
If this bug is fixed a number of test cases from
progs/verifier_array_access.c fail with retval not matching the
expected value. This test was recently converted to use test_loader.c
and inline assembly in [1]. When doing the conversion I missed the
important detail of test_verifier.c operation: when it creates
fixup_map_array_ro, fixup_map_array_wo and fixup_map_array_small it
populates these maps with a dummy record.
Disabling the __retval checks for the affected verifier_array_access
in this commit to avoid false-postivies in any potential bisects.
The issue is addressed in the next patch.
I verified that the __retval tags are now respected by changing
expected return values for all tests annotated with __retval, and
checking that these tests started to fail.
[1] https://lore.kernel.org/bpf/20230325025524.144043-1-eddyz87@gmail.com/
Fixes: 19a8e06f5f ("selftests/bpf: Tests execution support for test_loader.c")
Reported-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/bpf/f4c4aee644425842ee6aa8edf1da68f0a8260e7c.camel@gmail.com/T/
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230420232317.2181776-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Florian Westphal found a bug in test_loader.c processing of __retval
tag. Because of this bug the function test_loader.c:do_prog_test_run()
never executed and all __retval test tags were ignored. This hid an
issue with progs/refcounted_kptr.c tests.
When __retval tag bug is fixed and refcounted_kptr.c tests are run
kernel reports various issues and eventually hangs. Shortest reproducer
is the following command run a few times:
$ for i in $(seq 1 4); do (./test_progs --allow=refcounted_kptr &); done
Commenting out __retval tags for these tests until this issue is resolved.
Reported-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/bpf/f4c4aee644425842ee6aa8edf1da68f0a8260e7c.camel@gmail.com/T/
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230420232317.2181776-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This test case is extremely slow, taking around a minute compared to
most of the other DSCR tests taking a second at most. Perf shows most
time is spent by the kernel switching to each CPU it reads in
/sys/devices/system/cpu. This switching is an unavoidable consequnce
of reading all the .../cpuN/dscr values.
Remove the outer iteration loop from this test case, reducing the reads
from 1600 to 16. This still updates the DSCR 16 times and verifies on
every CPU each time, so I do not expect the lower coverage to be
meaningful. The speedup is significant: back down to ~1 second like the
other tests.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230406043320.125138-7-bgray@linux.ibm.com
The tests currently have a single writer thread updating the system
DSCR with a 1/1000 chance looped only 100 times. So only around one in
10 runs actually do anything.
* Add multiple threads to the dscr_explicit_random_test case.
* Use a barrier to make all the threads start work as simultaneously as
possible.
* Use a rwlock and make all threads have a reasonable chance to write to
the DSCR on each iteration.
PTHREAD_RWLOCK_PREFER_WRITER_NONRECURSIVE_NP is used to prevent
writers from starving while all the other threads keep reading.
Logging the reads/writes shows a decent mix across the whole test.
* Allow all threads a chance to write.
* Make the chance of writing more likely.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230406043320.125138-6-bgray@linux.ibm.com
Add new cases to the relevant tests that use explicitly synchronized
threads to test the behaviour across context switches with less
randomness. By locking the participants to the same CPU we guarantee a
context switch occurs each time they make progress, which is a likely
failure point if the kernel is not tracking the thread local DSCR
correctly.
The random case is left in to keep exercising potential edge cases.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230406043320.125138-5-bgray@linux.ibm.com
All current users of bind_to_cpu() don't care _which_ CPU they get, just
that they are bound to a single free one. So alter the interface to
1. Accept a BIND_CPU_ANY value that tells it to automatically
pick a CPU
2. Return the picked CPU
And convert all these users to bind_to_cpu(BIND_CPU_ANY).
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230406043320.125138-4-bgray@linux.ibm.com
This macro is to be used in assembly where C functions are called.
pcrel addressing mode requires branches to functions with a
localentry value of 1 to have either a trailing nop or @notoc.
This macro permits the latter without changing callers.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Add dummy definitions to fix selftests build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408021752.862660-5-npiggin@gmail.com
Fix the unmapping of hugepage allocated umems so that they are
properly unmapped. The new test referred to in the fixes label,
introduced a test that allocated a umem that is not a multiple of a 2M
hugepage size. This is fine for mmap() that rounds the size up the
nearest multiple of 2M. But munmap() requires the size to be a
multiple of the hugepage size in order for it to unmap the region. The
current behaviour of not properly unmapping the umem, was discovered
when further additions of tests that require hugepages (unaligned mode
tests only) started failing as the system was running out of
hugepages.
Fixes: c0801598e5 ("selftests: xsk: Add test UNALIGNED_INV_DESC_4K1_FRAME_SIZE")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230418143617.27762-1-magnus.karlsson@gmail.com
The va_high_addr_switch selftest is used to test mmap across 128TB
boundary. It divides the selftest cases into two main categories on the
basis of size. One set is used to create mappings that are multiples of
PAGE_SIZE while the other creates mappings that are multiples of
HUGETLB_SIZE.
In order to run the hugetlb testcases the binary must be appended with
"--run-hugetlb" but the file that used to run the test only invokes the
binary, thereby completely skipping the hugetlb testcases. Hence, the
required statement has been added.
Link: https://lkml.kernel.org/r/20230323105243.2807166-6-chaitanyas.prakash@arm.com
Signed-off-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests/mm: Implement support for arm64 on va".
The va_128TBswitch selftest is designed and implemented for PowerPC and
x86 architectures which support a 128TB switch, up to 256TB of virtual
address space and hugepage sizes of 16MB and 2MB respectively. Arm64
platforms on the other hand support a 256Tb switch, up to 4PB of virtual
address space and a default hugepage size of 512MB when 64k pagesize is
enabled.
These architectural differences require introducing support for arm64
platforms, after which a more generic naming convention is suggested. The
in code comments are amended to provide a more platform independent
explanation of the working of the code and nr_hugepages are configured as
required. Finally, the file running the testcase is modified in order to
prevent skipping of hugetlb testcases of va_high_addr_switch.
This patch (of 5):
Arm64 platforms have the ability to support 64kb pagesize, 512MB default
hugepage size and up to 4PB of virtual address space. The address switch
occurs at 256TB as opposed to 128TB. Hence, the necessary support has
been added.
Link: https://lkml.kernel.org/r/20230323105243.2807166-1-chaitanyas.prakash@arm.com
Link: https://lkml.kernel.org/r/20230323105243.2807166-2-chaitanyas.prakash@arm.com
Signed-off-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The userfaultfd stress test never tested private shmem, which I think was
overlooked long due. Add it so it matches with uffd unit test and it'll
cover all memory supported with the three memory types.
Meanwhile, rename the memory types a bit. Considering shared mem is the
major use case for both shmem / hugetlbfs, changing from:
anon, hugetlb, hugetlb_shared, shmem
To (with shmem-private added):
anon, hugetlb, hugetlb-private, shmem, shmem-private
Add the shmem-private to run_vmtests.sh too.
Link: https://lkml.kernel.org/r/20230412164546.329355-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With the new uffd unit test covering the /dev/userfaultfd path and syscall
path of uffd initializations, we can safely drop the devnode test in the
old stress test.
One thing is to avoid duplication of running the stress test twice which is
an overkill to only test the /dev/ interface in run_vmtests.sh.
The other benefit is now all uffd tests (that uses userfaultfd_open) can
run automatically as long as any type of interface is enabled (either
syscall or dev), so it's more likely to succeed rather than fail due to
unprivilege.
With this patch lands, we can drop all the "mem_type:XXX" handlings too.
Link: https://lkml.kernel.org/r/20230412164525.329176-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Move the two tests into the unit test, and convert it into 20 standalone
tests:
- events test on all 5 mem types, with wp on/off
- signal test on all 5 mem types, with wp on/off
Testing sigbus on anon... done
Testing sigbus on shmem... done
Testing sigbus on shmem-private... done
Testing sigbus on hugetlb... done
Testing sigbus on hugetlb-private... done
Testing sigbus-wp on anon... done
Testing sigbus-wp on shmem... done
Testing sigbus-wp on shmem-private... done
Testing sigbus-wp on hugetlb... done
Testing sigbus-wp on hugetlb-private... done
Testing events on anon... done
Testing events on shmem... done
Testing events on shmem-private... done
Testing events on hugetlb... done
Testing events on hugetlb-private... done
Testing events-wp on anon... done
Testing events-wp on shmem... done
Testing events-wp on shmem-private... done
Testing events-wp on hugetlb... done
Testing events-wp on hugetlb-private... done
It'll also remove a lot of global references along the way,
e.g. test_uffdio_wp will be replaced with the wp value passed over.
Link: https://lkml.kernel.org/r/20230412164400.328798-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This moves the minor test to the new unit test.
Rewrite the content check with char* opeartions to avoid fiddling with
my_bcmp().
Drop global vars test_uffdio_minor and test_collapse, just assume test them
always in common code for now.
OTOH make this single test into five tests:
- minor test on [shmem, hugetlb] with wp=false
- minor test on [shmem, hugetlb] with wp=true
- minor test + collapse on shmem only
One thing to mention that we used to test COLLAPSE+WP but that doesn't
sound right at all. It's possible it's silently broken but unnoticed
because COLLAPSE is not part of the default test suite.
Make the MADV_COLLAPSE test fail-able (by skip it when failing), because
it's not guaranteed to success anyway.
Drop a bunch of useless code after the move, because the unit test always
use aligned num of pages and has nothing to do with n_cpus.
Link: https://lkml.kernel.org/r/20230412164357.328779-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add two helpers to register/unregister to an uffd. Use them to drop
duplicate codes.
This patch also drops assert_expected_ioctls_present() and
get_expected_ioctls(). Reasons:
- It'll need a lot of effort to pass test_type==HUGETLB into it from
the upper, so it's the simplest way to get rid of another global var
- The ioctls returned in UFFDIO_REGISTER is hardly useful at all,
because any app can already detect kernel support on any ioctl via its
corresponding UFFD_FEATURE_*. The check here is for sanity mostly but
it's probably destined no user app will even use it.
- It's not friendly to one future goal of uffd to run on old
kernels, the problem is get_expected_ioctls() compiles against
UFFD_API_RANGE_IOCTLS, which is a value that can change depending on
where the test is compiled, rather than reflecting what the kernel
underneath has. It means it'll report false negatives on old kernels
so it's against our will.
So let's make our lives easier.
[peterx@redhat.com; tools/testing/selftests/mm/hugepage-mremap.c: add headers]
Link: https://lkml.kernel.org/r/ZDxrvZh/cw357D8P@x1n
Link: https://lkml.kernel.org/r/20230412164247.328293-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In many ways it's weird and unwanted to keep all the tests in the same
userfaultfd.c at least when still in the current way.
For example, it doesn't make much sense to run the stress test for each
method we can create an userfaultfd handle (either via syscall or /dev/
node). It's a waste of time running this twice for the whole stress as
the stress paths are the same, only the open path is different.
It's also just weird to need to manually specify different types of memory
to run all unit tests for the userfaultfd interface. We should be able to
just run a single program and that should go through all functional uffd
tests without running the stress test at all. The stress test was more
for torturing and finding race conditions. We don't want to wait for
stress to finish just to regress test a functional test.
When we start to pile up more things on top of the same file and same
functions, things start to go a bit chaos and the code is just harder to
maintain too with tons of global variables.
This patch creates a new test uffd-unit-tests to keep userfaultfd unit
tests in the future, currently empty.
Meanwhile rename the old userfaultfd.c test to uffd-stress.c.
Link: https://lkml.kernel.org/r/20230412164244.328270-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The idea was trying to flip this var in the alarm handler from time to
time to test -EEXIST of UFFDIO_ZEROPAGE, but firstly it's only used in the
zeropage test so probably only used once, meanwhile we passed
"retry==false" so it'll never got tested anyway.
Drop both sides so we always test UFFDIO_ZEROPAGE retries if has_zeropage
is set (!hugetlb).
One more thing to do is doing UFFDIO_REGISTER for the alias buffer too,
because otherwise the test won't even pass! We were just lucky that this
test never really got ran at all.
Link: https://lkml.kernel.org/r/20230412164238.328238-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
