If CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, memblock_free_pages()
only releases pages to the buddy allocator if they are not in the
deferred range. This is correct for free pages (as defined by
for_each_free_mem_pfn_range_in_zone()) because free pages in the
deferred range will be initialized and released as part of the deferred
init process. memblock_free_pages() is called by memblock_free_late(),
which is used to free reserved ranges after memblock_free_all() has
run. All pages in reserved ranges have been initialized at that point,
and accordingly, those pages are not touched by the deferred init
process. This means that currently, if the pages that
memblock_free_late() intends to release are in the deferred range, they
will never be released to the buddy allocator. They will forever be
reserved.
In addition, memblock_free_pages() calls kmsan_memblock_free_pages(),
which is also correct for free pages but is not correct for reserved
pages. KMSAN metadata for reserved pages is initialized by
kmsan_init_shadow(), which runs shortly before memblock_free_all().
For both of these reasons, memblock_free_pages() should only be called
for free pages, and memblock_free_late() should call __free_pages_core()
directly instead.
One case where this issue can occur in the wild is EFI boot on
x86_64. The x86 EFI code reserves all EFI boot services memory ranges
via memblock_reserve() and frees them later via memblock_free_late()
(efi_reserve_boot_services() and efi_free_boot_services(),
respectively). If any of those ranges happens to fall within the
deferred init range, the pages will not be released and that memory will
be unavailable.
For example, on an Amazon EC2 t3.micro VM (1 GB) booting via EFI:
v6.2-rc2:
# grep -E 'Node|spanned|present|managed' /proc/zoneinfo
Node 0, zone DMA
spanned 4095
present 3999
managed 3840
Node 0, zone DMA32
spanned 246652
present 245868
managed 178867
v6.2-rc2 + patch:
# grep -E 'Node|spanned|present|managed' /proc/zoneinfo
Node 0, zone DMA
spanned 4095
present 3999
managed 3840
Node 0, zone DMA32
spanned 246652
present 245868
managed 222816 # +43,949 pages
Fixes: 3a80a7fa79 ("mm: meminit: initialise a subset of struct pages if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Link: https://lore.kernel.org/r/01010185892de53e-e379acfb-7044-4b24-b30a-e2657c1ba989-000000@us-west-2.amazonses.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Pull memblock fixes from Mike Rapoport:
"Small fixes in kernel-doc and tests:
- Fix kernel-doc for memblock_phys_free() to use correct names for
the counterpart allocation methods
- Fix compilation error in memblock tests"
* tag 'fixes-2023-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: Fix doc for memblock_phys_free
memblock tests: Fix compilation error.
The cxl_test machinery builds modified versions of the modules in
drivers/cxl/ and intercepts some of their calls to allow cxl_test to
inject mock CXL topologies for test.
However, if cxl_test attempts the same with production modules,
fireworks ensue as Luis discovered [1]. Prevent that scenario by
arranging for cxl_test to check for a "watermark" symbol in each of the
modules it expects to be modified before the test can run. This turns
undefined runtime behavior or crashes into a safer failure to load the
cxl_test module.
Link: http://lore.kernel.org/r/20221209062919.1096779-1-mcgrof@kernel.org [1]
Reported-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, wifi, and netfilter.
Current release - regressions:
- bpf: fix nullness propagation for reg to reg comparisons, avoid
null-deref
- inet: control sockets should not use current thread task_frag
- bpf: always use maximal size for copy_array()
- eth: bnxt_en: don't link netdev to a devlink port for VFs
Current release - new code bugs:
- rxrpc: fix a couple of potential use-after-frees
- netfilter: conntrack: fix IPv6 exthdr error check
- wifi: iwlwifi: fw: skip PPAG for JF, avoid FW crashes
- eth: dsa: qca8k: various fixes for the in-band register access
- eth: nfp: fix schedule in atomic context when sync mc address
- eth: renesas: rswitch: fix getting mac address from device tree
- mobile: ipa: use proper endpoint mask for suspend
Previous releases - regressions:
- tcp: add TIME_WAIT sockets in bhash2, fix regression caught by
Jiri / python tests
- net: tc: don't intepret cls results when asked to drop, fix
oob-access
- vrf: determine the dst using the original ifindex for multicast
- eth: bnxt_en:
- fix XDP RX path if BPF adjusted packet length
- fix HDS (header placement) and jumbo thresholds for RX packets
- eth: ice: xsk: do not use xdp_return_frame() on tx_buf->raw_buf,
avoid memory corruptions
Previous releases - always broken:
- ulp: prevent ULP without clone op from entering the LISTEN status
- veth: fix race with AF_XDP exposing old or uninitialized
descriptors
- bpf:
- pull before calling skb_postpull_rcsum() (fix checksum support
and avoid a WARN())
- fix panic due to wrong pageattr of im->image (when livepatch and
kretfunc coexist)
- keep a reference to the mm, in case the task is dead
- mptcp: fix deadlock in fastopen error path
- netfilter:
- nf_tables: perform type checking for existing sets
- nf_tables: honor set timeout and garbage collection updates
- ipset: fix hash:net,port,net hang with /0 subnet
- ipset: avoid hung task warning when adding/deleting entries
- selftests: net:
- fix cmsg_so_mark.sh test hang on non-x86 systems
- fix the arp_ndisc_evict_nocarrier test for IPv6
- usb: rndis_host: secure rndis_query check against int overflow
- eth: r8169: fix dmar pte write access during suspend/resume with
WOL
- eth: lan966x: fix configuration of the PCS
- eth: sparx5: fix reading of the MAC address
- eth: qed: allow sleep in qed_mcp_trace_dump()
- eth: hns3:
- fix interrupts re-initialization after VF FLR
- fix handling of promisc when MAC addr table gets full
- refine the handling for VF heartbeat
- eth: mlx5:
- properly handle ingress QinQ-tagged packets on VST
- fix io_eq_size and event_eq_size params validation on big endian
- fix RoCE setting at HCA level if not supported at all
- don't turn CQE compression on by default for IPoIB
- eth: ena:
- fix toeplitz initial hash key value
- account for the number of XDP-processed bytes in interface stats
- fix rx_copybreak value update
Misc:
- ethtool: harden phy stat handling against buggy drivers
- docs: netdev: convert maintainer's doc from FAQ to a normal
document"
* tag 'net-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits)
caif: fix memory leak in cfctrl_linkup_request()
inet: control sockets should not use current thread task_frag
net/ulp: prevent ULP without clone op from entering the LISTEN status
qed: allow sleep in qed_mcp_trace_dump()
MAINTAINERS: Update maintainers for ptp_vmw driver
usb: rndis_host: Secure rndis_query check against int overflow
net: dpaa: Fix dtsec check for PCS availability
octeontx2-pf: Fix lmtst ID used in aura free
drivers/net/bonding/bond_3ad: return when there's no aggregator
netfilter: ipset: Rework long task execution when adding/deleting entries
netfilter: ipset: fix hash:net,port,net hang with /0 subnet
net: sparx5: Fix reading of the MAC address
vxlan: Fix memory leaks in error path
net: sched: htb: fix htb_classify() kernel-doc
net: sched: cbq: dont intepret cls results when asked to drop
net: sched: atm: dont intepret cls results when asked to drop
dt-bindings: net: marvell,orion-mdio: Fix examples
dt-bindings: net: sun8i-emac: Add phy-supply property
net: ipa: use proper endpoint mask for suspend
selftests: net: return non-zero for failures reported in arp_ndisc_evict_nocarrier
...
Daniel Borkmann says:
====================
bpf-next 2023-01-04
We've added 45 non-merge commits during the last 21 day(s) which contain
a total of 50 files changed, 1454 insertions(+), 375 deletions(-).
The main changes are:
1) Fixes, improvements and refactoring of parts of BPF verifier's
state equivalence checks, from Andrii Nakryiko.
2) Fix a few corner cases in libbpf's BTF-to-C converter in particular
around padding handling and enums, also from Andrii Nakryiko.
3) Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better
support decap on GRE tunnel devices not operating in collect metadata,
from Christian Ehrig.
4) Improve x86 JIT's codegen for PROBE_MEM runtime error checks,
from Dave Marchevsky.
5) Remove the need for trace_printk_lock for bpf_trace_printk
and bpf_trace_vprintk helpers, from Jiri Olsa.
6) Add proper documentation for BPF_MAP_TYPE_SOCK{MAP,HASH} maps,
from Maryam Tahhan.
7) Improvements in libbpf's btf_parse_elf error handling, from Changbin Du.
8) Bigger batch of improvements to BPF tracing code samples,
from Daniel T. Lee.
9) Add LoongArch support to libbpf's bpf_tracing helper header,
from Hengqi Chen.
10) Fix a libbpf compiler warning in perf_event_open_probe on arm32,
from Khem Raj.
11) Optimize bpf_local_storage_elem by removing 56 bytes of padding,
from Martin KaFai Lau.
12) Use pkg-config to locate libelf for resolve_btfids build,
from Shen Jiamin.
13) Various libbpf improvements around API documentation and errno
handling, from Xin Liu.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (45 commits)
libbpf: Return -ENODATA for missing btf section
libbpf: Add LoongArch support to bpf_tracing.h
libbpf: Restore errno after pr_warn.
libbpf: Added the description of some API functions
libbpf: Fix invalid return address register in s390
samples/bpf: Use BPF_KSYSCALL macro in syscall tracing programs
samples/bpf: Fix tracex2 by using BPF_KSYSCALL macro
samples/bpf: Change _kern suffix to .bpf with syscall tracing program
samples/bpf: Use vmlinux.h instead of implicit headers in syscall tracing program
samples/bpf: Use kyscall instead of kprobe in syscall tracing program
bpf: rename list_head -> graph_root in field info types
libbpf: fix errno is overwritten after being closed.
bpf: fix regs_exact() logic in regsafe() to remap IDs correctly
bpf: perform byte-by-byte comparison only when necessary in regsafe()
bpf: reject non-exact register type matches in regsafe()
bpf: generalize MAYBE_NULL vs non-MAYBE_NULL rule
bpf: reorganize struct bpf_reg_state fields
bpf: teach refsafe() to take into account ID remapping
bpf: Remove unused field initialization in bpf's ctl_table
selftests/bpf: Add jit probe_mem corner case tests to s390x denylist
...
====================
Link: https://lore.kernel.org/r/20230105000926.31350-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexei Starovoitov says:
====================
bpf 2023-01-04
We've added 5 non-merge commits during the last 8 day(s) which contain
a total of 5 files changed, 112 insertions(+), 18 deletions(-).
The main changes are:
1) Always use maximal size for copy_array in the verifier to fix
KASAN tracking, from Kees.
2) Fix bpf task iterator walking through dead tasks, from Kui-Feng.
3) Make sure livepatch and bpf fexit can coexist, from Chuang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Always use maximal size for copy_array()
selftests/bpf: add a test for iter/task_vma for short-lived processes
bpf: keep a reference to the mm, in case the task is dead.
selftests/bpf: Temporarily disable part of btf_dump:var_data test.
bpf: Fix panic due to wrong pageattr of im->image
====================
Link: https://lore.kernel.org/r/20230104215500.79435-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
CXL is using tracepoints for reporting RAS capability register payloads
for AER events, and has plans to use tracepoints for the output payload
of Get Poison List and Get Event Records commands. For organization
purposes it would be nice to keep those all under a single + local CXL
trace system. This also organization also potentially helps in the
future when CXL drivers expand beyond generic memory expanders, however
that would also entail a move away from the expander-specific
cxl_dev_state context, save that for later.
Note that the powerpc-specific drivers/misc/cxl/ also defines a 'cxl'
trace system, however, it is unlikely that a single platform will ever
load both drivers simultaneously.
Cc: Steven Rostedt <rostedt@goodmis.org>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/167051869176.436579.9728373544811641087.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Commit cf4694be2b ("tools: Add atomic_test_and_set_bit()") changed
tools/arch/x86/include/asm/atomic.h to include <asm/asm.h>, which causes
'make -C tools/testing/memblock' to fail with:
In file included from ../../include/asm/atomic.h:6,
from ../../include/linux/atomic.h:5,
from ./linux/mmzone.h:5,
from ../../include/linux/mm.h:5,
from ../../include/linux/pfn.h:5,
from ./linux/memory_hotplug.h:6,
from ./linux/init.h:7,
from ./linux/memblock.h:11,
from tests/common.h:8,
from tests/basic_api.h:5,
from main.c:2:
../../include/asm/../../arch/x86/include/asm/atomic.h:11:10: fatal error: asm/asm.h: No such file or directory
11 | #include <asm/asm.h>
| ^~~~~~~~~~~
Create a symlink to asm/asm.h in the same manner as the existing one to
asm/cmpxchg.h.
Signed-off-by: Aaron Thompson <dev@aaront.org>
Link: https://lore.kernel.org/r/010101857c402765-96e2dbc6-b82b-47e2-a437-4834dbe0b96b-000000@us-west-2.amazonses.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
This commit upgrades the kvm.sh script's --kconfig parameter to accept
string-valued Kconfig options with double-quoted string values.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, the presence of any quoted-string Kconfig option in the
scenario files or the CFcommon file (aside from the special-cased
CONFIG_INITRAMFS_SOURCE option) will result in an "improperly set"
diagnostic. This commit updates configcheck.sh to strip double quotes
in order to permit string-valued Kconfig options to be handled correctly.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The latest version of grep is deprecating the egrep command, so that
its output contains warnings as follows:
egrep: warning: egrep is obsolescent; using grep -E
Fix this using "grep -E" instead.
sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/testing/selftests/rcutorture`
Here are the steps to install the latest grep:
wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz
tar xf grep-3.8.tar.gz
cd grep-3.8 && ./configure && make
sudo make install
export PATH=/usr/local/bin:$PATH
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Under some conditions, a given run's vmlinux file will be compressed,
so that it is named vmlinux.xz rather than vmlinux. in such cases,
kvm-find-errors.sh will complain about the nonexistence of vmlinux.
This commit therefore causes kvm-find-errors.sh to check for vmlinux.xz
as well as for vmlinux.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Add more coverage to our standard test cases:
- 8kHz mono and stereo to verify that the most common mono format is
clocked correctly.
- 44.1kHz stereo to verify that this different clock base is generated
accurately.
- 48kHz 6 channel to verify that 6 channel is clocked correctly.
- 96kHz stereo since that is a common audiophile rate.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221208-alsa-pcm-test-hacks-v4-7-5a152e65b1e1@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In order to help with the comprehensibility of tests it is useful for us to
document what the test is attempting to cover. We could just do this through
comments in the configuration files but in order to aid people looking at
the output of the program in logs let's provide support for an optional
'description' directive which we log prior to running each of the tests.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221208-alsa-pcm-test-hacks-v4-5-5a152e65b1e1@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since we don't know what the capabilities of an unknown card is any of our
standard tests may fail due to not being supported by the system. Set a
flag once we've configured the stream, just before we start data, to say
that the system accepted our stream configuration.
Since there shouldn't be a use case for tests that are specified for the
individual system failing for those tests we also add a new test which
fails if we are unable to configure the settings specified in the system
specific configuration file.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221208-alsa-pcm-test-hacks-v4-4-5a152e65b1e1@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Rather than allowing the system specific tests to replace the default set
of tests instead run them in addition to the standard set of tests. In
order to avoid name collisions in the reported tests we add an additional
test class element to the reported tests. Doing this means we always get a
consistent baseline of coverage no matter what card we run on but retain
the ability to specify specific coverage for a given system.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221208-alsa-pcm-test-hacks-v4-3-5a152e65b1e1@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Obtain all test parameters from the configuration files. The defaults
are defined in the pcm-test.conf file. The test count and parameters
may be variable per specific hardware.
Also, handle alt_formats field now (with the fixes in the format loop).
It replaces the original "automatic" logic which is not so universal.
The code may be further extended to skip various tests based
on the configuration hints, if the exact PCM hardware parameters
are not available for the given hardware.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221208-alsa-pcm-test-hacks-v4-2-5a152e65b1e1@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In preparation to adopting a better, more comprehensive approach to
adding the coverage that was just added using some changes from Jaroslav
which were sent at the same time the recently added improvements were
being applied drop what was applied. This reverts:
7d721baea1 "kselftest/alsa: Add more coverage of sample rates and channel counts"
ee12040dd5 "kselftest/alsa: Provide more meaningful names for tests"
ae95efd975 "kselftest/alsa: Don't any configuration in the sample config"
8370d9b00c Revert "kselftest/alsa: Report failures to set the requested channels as skips"
f944f8b539 "kselftest/alsa: Report failures to set the requested sample rate as skips"
22eeb8f531 "kselftest/alsa: Refactor pcm-test to list the tests to run in a struct"
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221208-alsa-pcm-test-hacks-v4-1-5a152e65b1e1@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Return non-zero return value if there is any failure reported in this
script during the test. Otherwise it can only reflect the status of
the last command.
Fixes: f86ca07eb5 ("selftests: net: add arp_ndisc_evict_nocarrier")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The cleanup_v6() will cause the arp_ndisc_evict_nocarrier script exit
with 255 (No such file or directory), even the tests are good:
# selftests: net: arp_ndisc_evict_nocarrier.sh
# run arp_evict_nocarrier=1 test
# RTNETLINK answers: File exists
# ok
# run arp_evict_nocarrier=0 test
# RTNETLINK answers: File exists
# ok
# run all.arp_evict_nocarrier=0 test
# RTNETLINK answers: File exists
# ok
# run ndisc_evict_nocarrier=1 test
# ok
# run ndisc_evict_nocarrier=0 test
# ok
# run all.ndisc_evict_nocarrier=0 test
# ok
not ok 1 selftests: net: arp_ndisc_evict_nocarrier.sh # exit=255
This is because it's trying to modify the parameter for ipv4 instead.
Also, tests for ipv6 (run_ndisc_evict_nocarrier_enabled() and
run_ndisc_evict_nocarrier_disabled() are working on veth1, reflect
this fact in cleanup_v6().
Fixes: f86ca07eb5 ("selftests: net: add arp_ndisc_evict_nocarrier")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bhash2 split the bind() validation logic into wildcard and non-wildcard
cases. Let's add a test to catch future regression.
Before the previous patch:
# ./bind_timewait
TAP version 13
1..2
# Starting 2 tests from 3 test cases.
# RUN bind_timewait.localhost.1 ...
# bind_timewait.c:87:1:Expected ret (0) == -1 (-1)
# 1: Test terminated by assertion
# FAIL bind_timewait.localhost.1
not ok 1 bind_timewait.localhost.1
# RUN bind_timewait.addrany.1 ...
# OK bind_timewait.addrany.1
ok 2 bind_timewait.addrany.1
# FAILED: 1 / 2 tests passed.
# Totals: pass:1 fail:1 xfail:0 xpass:0 skip:0 error:0
After:
# ./bind_timewait
TAP version 13
1..2
# Starting 2 tests from 3 test cases.
# RUN bind_timewait.localhost.1 ...
# OK bind_timewait.localhost.1
ok 1 bind_timewait.localhost.1
# RUN bind_timewait.addrany.1 ...
# OK bind_timewait.addrany.1
ok 2 bind_timewait.addrany.1
# PASSED: 2 / 2 tests passed.
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
x86:
* Change tdp_mmu to a read-only parameter
* Separate TDP and shadow MMU page fault paths
* Enable Hyper-V invariant TSC control
selftests:
* Use TAP interface for kvm_binary_stats_test and tsc_msrs_test
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a test for the newly introduced Hyper-V invariant TSC control feature:
- HV_X64_MSR_TSC_INVARIANT_CONTROL is not available without
HV_ACCESS_TSC_INVARIANT CPUID bit set and available with it.
- BIT(0) of HV_X64_MSR_TSC_INVARIANT_CONTROL controls the filtering of
architectural invariant TSC (CPUID.80000007H:EDX[8]) bit.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221013095849.705943-8-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enhance 'hyperv_features' selftest by adding a check that KVM
preserves values written to PV MSRs. Two MSRs are, however, 'special':
- HV_X64_MSR_EOI as it is a 'write-only' MSR,
- HV_X64_MSR_RESET as it always reads as '0'.
The later doesn't require any special handling right now because the
test never writes anything besides '0' to the MSR, leave a TODO node
about the fact.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221013095849.705943-7-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It may not be clear what 'msr->available' means. The test actually
checks that accessing the particular MSR doesn't cause #GP, rename
the variable accordingly.
While on it, use 'true'/'false' instead of '1'/'0' for 'write'/
'fault_expected' as these are boolean.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221013095849.705943-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The kvm_binary_stats_test test currently does not have any output (unless
one of the TEST_ASSERT statement fails), so it's hard to say for a user
how far it did proceed already. Thus let's make this a little bit more
user-friendly and include some TAP output via the kselftest.h interface.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Message-Id: <20221004093131.40392-2-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a task iterator traverses vma(s), it is possible task->mm might
become invalid in the middle of traversal and this may cause kernel
misbehave (e.g., crash)
This test case creates iterators repeatedly and forks short-lived
processes in the background to detect this bug. The test will last
for 3 seconds to get the chance to trigger the issue.
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221216221855.4122288-3-kuifeng@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit 7443b296e6 ("x86/percpu: Move cpu_number next to current_task")
moved global per_cpu variable 'cpu_number' into pcpu_hot structure.
Therefore this part of var_data test is no longer valid.
Disable it until better solution is found.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
x86:
* several fixes to nested VMX execution controls
* fixes and clarification to the documentation for Xen emulation
* do not unnecessarily release a pmu event with zero period
* MMU fixes
* fix Coverity warning in kvm_hv_flush_tlb()
selftests:
* fixes for the ucall mechanism in selftests
* other fixes mostly related to compilation with clang
Commit 8fda37cf3d ("KVM: selftests: Stuff RAX/RCX with 'safe' values
in vmmcall()/vmcall()", 2022-11-21) broke the svm_nested_soft_inject_test
because it placed a "pop rbp" instruction after vmmcall. While this is
correct and mimics what is done in the VMX case, this particular test
expects a ud2 instruction right after the vmmcall, so that it can skip
over it in the L1 part of the test.
Inline a suitably-modified version of vmmcall() to restore the
functionality of the test.
Fixes: 8fda37cf3d ("KVM: selftests: Stuff RAX/RCX with 'safe' values in vmmcall()/vmcall()"
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221130181147.9911-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While KVM_XEN_EVTCHN_RESET is usually called with no vCPUs running,
if that happened it could cause a deadlock. This is due to
kvm_xen_eventfd_reset() doing a synchronize_srcu() inside
a kvm->lock critical section.
To avoid this, first collect all the evtchnfd objects in an
array and free all of them once the kvm->lock critical section
is over and th SRCU grace period has expired.
Reported-by: Michal Luczaj <mhal@rbox.co>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a rseq-x86-bits.h template header which is internally included
to generate the static inline functions covering:
- relaxed and release memory ordering,
- per-cpu-id and per-mm-cid per-cpu data access.
This introduces changes to the rseq.h selftests API which require to
update the rseq selftest programs. Similar API/templating changes need
to be done for other architectures.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-12-mathieu.desnoyers@efficios.com
