Pull sound fixes from Takashi Iwai:
"Here is a collection of fixes that have been gathered since the
previous pull request.
All about device-specific fixes and quirks, and most of them are
pretty small and trivial"
* tag 'sound-fix-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (25 commits)
ALSA: hda/realtek: Workaround for resume on Dell Venue 11 Pro 7130
ALSA: hda: Fix headset detection failure due to unstable sort
ALSA: pcm: use new array-copying-wrapper
ASoC: codec: es8316: "DAC Soft Ramp Rate" is just a 2 bit control
ASoC: amd: acp: Fix possible deadlock
firmware: cs_dsp: FW_CS_DSP_KUNIT_TEST should not select REGMAP
ALSA: usb-audio: Add delay quirk for iBasso DC07 Pro
ALSA: hda/realtek: Fix quirk matching for Legion Pro 7
ASoC: renesas: SND_SIU_MIGOR should depend on DMADEVICES
ASoC: Intel: bytcr_rt5640: Add DMI quirk for Vexia Edu Atla 10 tablet 5V
ASoC: da7213: Initialize the mutex
ASoC: use to_platform_device() instead of container_of()
ASoC: acp: Support microphone from Lenovo Go S
ASoC: SOF: imx8m: Add entry for new 8M Plus revision
ASoC: SOF: imx8: Add entries for new 8QM and 8QXP revisions
ASoC: SOF: imx: Add mach entry to select cs42888 topology
dt-bindings: arm: imx: Add board revisions for i.MX8MP, i.MX8QM and i.MX8QXP
ASoC: fsl_asrc_m2m: select CONFIG_DMA_SHARED_BUFFER
ASoC: audio-graph-card2: use correct endpoint when getting link parameters
ASoC: SOF: imx8m: add SAI2,5,6,7
...
ASoC: Fixes for v6.14
A bunch of fixes that came in during the merge window, plus a few new
device IDs. The i.MX changes are a little large since they add some new
quirk data as well as device IDs, and the audio graph card change for
picking the correct endpoint for links is large due to updating a number
of call sites.
Pull driver core and debugfs updates from Greg KH:
"Here is the big set of driver core and debugfs updates for 6.14-rc1.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at
least one user that does have a regression with these, but Al is
working on tracking down the fix for it. In my use (and everyone
else's linux-next use), it does not seem like a big issue at the
moment.
Here's a short list of the things in here:
- driver core rust bindings for PCI, platform, OF, and some i/o
functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing
things in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon""
* tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
rust: device: Use as_char_ptr() to avoid explicit cast
rust: device: Replace CString with CStr in property_present()
devcoredump: Constify 'struct bin_attribute'
devcoredump: Define 'struct bin_attribute' through macro
rust: device: Add property_present()
saner replacement for debugfs_rename()
orangefs-debugfs: don't mess with ->d_name
octeontx2: don't mess with ->d_parent or ->d_parent->d_name
arm_scmi: don't mess with ->d_parent->d_name
slub: don't mess with ->d_name
sof-client-ipc-flood-test: don't mess with ->d_name
qat: don't mess with ->d_name
xhci: don't mess with ->d_iname
mtu3: don't mess wiht ->d_iname
greybus/camera - stop messing with ->d_iname
mediatek: stop messing with ->d_iname
netdevsim: don't embed file_operations into your structs
b43legacy: make use of debugfs_get_aux()
b43: stop embedding struct file_operations into their objects
carl9170: stop embedding file_operations into their objects
...
This is found by our static analysis tool.
pcm_native.c utilizes memdup_user() to copy an array from userspace.
There is a new wrapper, specifically designed for copying arrays. Use
this one instead.
This is similar to the
commit 3e91a38de1 ("fbdev: viafb: use new array-copying-wrapper").
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Link: https://patch.msgid.link/20250127160655.3119470-1-cy1yang@outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull non-MM updates from Andrew Morton:
"Mainly individually changelogged singleton patches. The patch series
in this pull are:
- "lib min_heap: Improve min_heap safety, testing, and documentation"
from Kuan-Wei Chiu provides various tightenings to the min_heap
library code
- "xarray: extract __xa_cmpxchg_raw" from Tamir Duberstein preforms
some cleanup and Rust preparation in the xarray library code
- "Update reference to include/asm-<arch>" from Geert Uytterhoeven
fixes pathnames in some code comments
- "Converge on using secs_to_jiffies()" from Easwar Hariharan uses
the new secs_to_jiffies() in various places where that is
appropriate
- "ocfs2, dlmfs: convert to the new mount API" from Eric Sandeen
switches two filesystems to the new mount API
- "Convert ocfs2 to use folios" from Matthew Wilcox does that
- "Remove get_task_comm() and print task comm directly" from Yafang
Shao removes now-unneeded calls to get_task_comm() in various
places
- "squashfs: reduce memory usage and update docs" from Phillip
Lougher implements some memory savings in squashfs and performs
some maintainability work
- "lib: clarify comparison function requirements" from Kuan-Wei Chiu
tightens the sort code's behaviour and adds some maintenance work
- "nilfs2: protect busy buffer heads from being force-cleared" from
Ryusuke Konishi fixes an issues in nlifs when the fs is presented
with a corrupted image
- "nilfs2: fix kernel-doc comments for function return values" from
Ryusuke Konishi fixes some nilfs kerneldoc
- "nilfs2: fix issues with rename operations" from Ryusuke Konishi
addresses some nilfs BUG_ONs which syzbot was able to trigger
- "minmax.h: Cleanups and minor optimisations" from David Laight does
some maintenance work on the min/max library code
- "Fixes and cleanups to xarray" from Kemeng Shi does maintenance
work on the xarray library code"
* tag 'mm-nonmm-stable-2025-01-24-23-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (131 commits)
ocfs2: use str_yes_no() and str_no_yes() helper functions
include/linux/lz4.h: add some missing macros
Xarray: use xa_mark_t in xas_squash_marks() to keep code consistent
Xarray: remove repeat check in xas_squash_marks()
Xarray: distinguish large entries correctly in xas_split_alloc()
Xarray: move forward index correctly in xas_pause()
Xarray: do not return sibling entries from xas_find_marked()
ipc/util.c: complete the kernel-doc function descriptions
gcov: clang: use correct function param names
latencytop: use correct kernel-doc format for func params
minmax.h: remove some #defines that are only expanded once
minmax.h: simplify the variants of clamp()
minmax.h: move all the clamp() definitions after the min/max() ones
minmax.h: use BUILD_BUG_ON_MSG() for the lo < hi test in clamp()
minmax.h: reduce the #define expansion of min(), max() and clamp()
minmax.h: update some comments
minmax.h: add whitespace around operators and after commas
nilfs2: do not update mtime of renamed directory that is not moved
nilfs2: handle errors that nilfs_prepare_chunk() may return
CREDITS: fix spelling mistake
...
The recent cleanup of the quirk table entries with the codec ID
matching caused a regression on some Lenovo Legion 7 models with PCI
SSID 17aa:386f: it assumed wrongly as if the codec SSID on the machine
were also 17aa:386f, but in this case, it was 17aa:38a8. This made
the binding with a wrong sub-codec, instead of TAS2781, the Cirrus
codec was bound.
For addressing the regression, correct the quirk entry to the right
value 17aa:38a8.
Note that this makes the entry appearing in an unsorted position.
This exception is needed because the entry must match before the PCI
SSID 17aa:386f.
Also there is another entry for 17aa:38a8, but the latter is for PCI
SSID matching while the new entry is for the codec SSID matching.
Fixes: 504f052aa3 ("ALSA: hda/realtek: Use codec SSID matching for Lenovo devices")
Reported-and-tested-by: Samantha Glocker <iam@anislandsomewhere.com>
Closes: https://lore.kernel.org/CAGPQRHYd48U__UKYj2jJnT4+dnNNoWRBi+wj6zPRn=JpNMBUrg@mail.gmail.com
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250125120519.16420-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull sound updates from Takashi Iwai:
"This was a relatively calm cycle, and most of changes are rather small
device-specific fixes. Here are highlights:
Core:
- Further enhancements of ALSA rawmidi and sequencer APIs for MIDI
2.0
- compress-offload API extensions for ASRC support
ASoC:
- Allow clocking on each DAI in an audio graph card to be configured
separately
- Improved power management for Renesas RZ-SSI
- KUnit testing for the Cirrus DSP framework
- Memory to meory operation support for Freescale/NXP platforms
- Support for pause operations in SOF
- Support for Allwinner suinv F1C100s, Awinc AW88083, Realtek
ALC5682I-VE
HD- and USB-audio:
- Add support for Focusrite Scarlett 4th Gen 16i16, 18i16, and 18i20
interfaces via new FCP driver
- TAS2781 SPI HD-audio sub-codec support
- Various device-specific quirks as usual"
* tag 'sound-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (235 commits)
ALSA: hda: tas2781-spi: Fix bogus error handling in tas2781_hda_spi_probe()
ALSA: hda: tas2781-spi: Fix error code in tas2781_read_acpi()
ALSA: hda: tas2781-spi: Delete some dead code
ALSA: usb: fcp: Fix return code from poll ops
ALSA: usb: fcp: Fix incorrect resp->opcode retrieval
ALSA: usb: fcp: Fix meter_levels type to __le32
ALSA: hda/realtek: Enable Mute LED on HP Laptop 14s-fq1xxx
ALSA: hda: tas2781-spi: Fix -Wsometimes-uninitialized in tasdevice_spi_switch_book()
ALSA: ctxfi: Simplify dao_clear_{left,right}_input() functions
ALSA: hda: tas2781-spi: select CRC32 instead of CRC32_SARWATE
ALSA: usb: fcp: Fix hwdep read ops types
ALSA: scarlett2: Add device_setup option to use FCP driver
ALSA: FCP: Add Focusrite Control Protocol driver
ALSA: hda/tas2781: Add tas2781 hda SPI driver
ALSA: hda/realtek - Fixed headphone distorted sound on Acer Aspire A115-31 laptop
ASoC: xilinx: xlnx_spdif: Simpify using devm_clk_get_enabled()
ALSA: hda: Support for Ideapad hotkey mute LEDs
ASoC: Intel: sof_sdw: Fix DMI match for Lenovo 83JX, 83MC and 83NM
ASoC: Intel: sof_sdw: Fix DMI match for Lenovo 83LC
ASoC: dapm: add support for preparing streams
...
Merge series from Daniel Baluta <daniel.baluta@nxp.com>:
We introduce SOF support for new board revisions for i.MX8MP/QM/QXP
which wrt audio they replace wm8960 codec with wm8962.
Also add support for cs42888 codec on i.MX8QM/8QXP baseboard.
The Vexia EDU ATLA 10 tablet comes in 2 different versions with
significantly different mainboards. The only outward difference is that
the charging barrel on one is marked 5V and the other is marked 9V.
The 5V version mostly works with the BYTCR defaults, except that it is
missing a CHAN package in its ACPI tables and the default of using
SSP0-AIF2 is wrong, instead SSP0-AIF1 must be used. That and its jack
detect signal is not inverted as it usually is.
Add a DMI quirk for the 5V version to fix sound not working.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20250123132507.18434-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull i2c updates from Wolfram Sang:
"Core:
- list-based mechanisms for handling auto-detected and userspace
created clients are replaced with a flag-based approach. The
resulting code is much simpler as well as the locking.
- i2c clients now get a default debugfs dir managed by the I2C core.
Drivers don't have to maintain their own directory anymore.
Driver updates:
- xiic: atomic_transfer support
- imx-lpi2c: DMA and target mode support
- riic cleanups
- npcm: better timeout handling and more precise frequency setups
- davinci: remove unused platform_data
- at24: add new compatibles for variants from Giantec and Puya
Semiconductor (together with a new vendor prefix)"
* tag 'i2c-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits)
i2c: add kdoc for the new debugfs entry of clients
i2c: designware: Actually make use of the I2C_DW_COMMON and I2C_DW symbol namespaces
i2c: add core-managed per-client directory in debugfs
i2c: Force ELAN06FA touchpad I2C bus freq to 100KHz
i2c: riic: Add `riic_bus_barrier()` to check bus availability
i2c: riic: Use predefined macro and simplify clock tick calculation
i2c: riic: Mark riic_irqs array as const
i2c: riic: Make use of devres helper to request deasserted reset line
i2c: riic: Use GENMASK() macro for bitmask definitions
i2c: riic: Use BIT macro consistently
i2c: riic: Use local `dev` pointer in `dev_err_probe()`
i2c: riic: Use dev_err_probe in probe and riic_init_hw functions
i2c: riic: Introduce a separate variable for IRQ
i2c: amd756: Remove superfluous TODO
Revert "i2c: amd756: Fix endianness handling for word data"
i2c: i801: Add lis3lv02d for Dell Precision M6800
i2c: i801: Remove unnecessary PCI function call
i2c: core: Allocate temp client on the stack in i2c_detect
i2c: slave-eeprom: Constify 'struct bin_attribute'
i2c: imx-lpi2c: make controller available until the system enters suspend_noirq() and from resume_noirq().
...
Randconfig builds without dmabuf result in this link error from
the fasl-asrc driver:
ERROR: modpost: "dma_buf_put" [sound/core/snd-compress.ko] undefined!
ERROR: modpost: "dma_buf_export" [sound/soc/fsl/snd-soc-fsl-asrc.ko] undefined!
Add the missing 'select' statement.
Fixes: 24a01710f6 ("ASoC: fsl_asrc_m2m: Add memory to memory function")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20250122065330.1423248-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The error handling in tas2781_hda_spi_probe() has quite a few
problems, as reported by Dan Carpenter. The code jumps to err label
and calls tas2781_hda_remove(), but this call would rather crash.
In some places, no error code is set properly, and the runtime PM
setup is doubly done.
This patch tries to address those bogus error handling. Basically we
can return immediately at each error before adding the component.
Also, the error code should be set properly for the unmatched SPI
device name. And finally, component_add() should be added before
enabling the runtime PM.
Fixes: bb5f86ea50 ("ALSA: hda/tas2781: Add tas2781 hda SPI driver")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/ae5fcd48-58ac-49a8-a434-5f779bad0fb7@stanley.mountain
Link: https://patch.msgid.link/20250122084756.23876-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull drm updates from Dave Airlie:
"There are two external interactions of note, the msm tree pull in some
opp tree, hopefully the opp tree arrives from the same git tree
however it normally does.
There is also a new cgroup controller for device memory, that is used
by drm, so is merging through my tree. This will hopefully help open
up gpu cgroup usage a bit more and move us forward.
There is a new accelerator driver for the AMD XDNA Ryzen AI NPUs.
Then the usual xe/amdgpu/i915/msm leaders and lots of changes and
refactors across the board:
core:
- device memory cgroup controller added
- Remove driver date from drm_driver
- Add drm_printer based hex dumper
- drm memory stats docs update
- scheduler documentation improvements
new driver:
- amdxdna - Ryzen AI NPU support
connector:
- add a mutex to protect ELD
- make connector setup two-step
panels:
- Introduce backlight quirks infrastructure
- New panels: KDB KD116N2130B12, Tianma TM070JDHG34-00,
- Multi-Inno Technology MI1010Z1T-1CP11
bridge:
- ti-sn65dsi83: Add ti,lvds-vod-swing optional properties
- Provide default implementation of atomic_check for HDMI bridges
- it605: HDCP improvements, MCCS Support
xe:
- make OA buffer size configurable
- GuC capture fixes
- add ufence and g2h flushes
- restore system memory GGTT mappings
- ioctl fixes
- SRIOV PF scheduling priority
- allow fault injection
- lots of improvements/refactors
- Enable GuC's WA_DUAL_QUEUE for newer platforms
- IRQ related fixes and improvements
i915:
- More accurate engine busyness metrics with GuC submission
- Ensure partial BO segment offset never exceeds allowed max
- Flush GuC CT receive tasklet during reset preparation
- Some DG2 refactor to fix DG2 bugs when operating with certain CPUs
- Fix DG1 power gate sequence
- Enabling uncompressed 128b/132b UHBR SST
- Handle hdmi connector init failures, and no HDMI/DP cases
- More robust engine resets on Haswell and older
i915/xe display:
- HDCP fixes for Xe3Lpd
- New GSC FW ARL-H/ARL-U
- support 3 VDSC engines 12 slices
- MBUS joining sanitisation
- reconcile i915/xe display power mgmt
- Xe3Lpd fixes
- UHBR rates for Thunderbolt
amdgpu:
- DRM panic support
- track BO memory stats at runtime
- Fix max surface handling in DC
- Cleaner shader support for gfx10.3 dGPUs
- fix drm buddy trim handling
- SDMA engine reset updates
- Fix doorbell ttm cleanup
- RAS updates
- ISP updates
- SDMA queue reset support
- Rework DPM powergating interfaces
- Documentation updates and cleanups
- DCN 3.5 updates
- Use a pm notifier to more gracefully handle VRAM eviction on
suspend or hibernate
- Add debugfs interfaces for forcing scheduling to specific engine
instances
- GG 9.5 updates
- IH 4.4 updates
- Make missing optional firmware less noisy
- PSP 13.x updates
- SMU 13.x updates
- VCN 5.x updates
- JPEG 5.x updates
- GC 12.x updates
- DC FAMS updates
amdkfd:
- GG 9.5 updates
- Logging improvements
- Shader debugger fixes
- Trap handler cleanup
- Cleanup includes
- Eviction fence wq fix
msm:
- MDSS:
- properly described UBWC registers
- added SM6150 (aka QCS615) support
- DPU:
- added SM6150 (aka QCS615) support
- enabled wide planes if virtual planes are enabled (by using two
SSPPs for a single plane)
- added CWB hardware blocks support
- DSI:
- added SM6150 (aka QCS615) support
- GPU:
- Print GMU core fw version
- GMU bandwidth voting for a740 and a750
- Expose uche trap base via uapi
- UAPI error reporting
rcar-du:
- Add r8a779h0 Support
ivpu:
- Fix qemu crash when using passthrough
nouveau:
- expose GSP-RM logging buffers via debugfs
panfrost:
- Add MT8188 Mali-G57 MC3 support
rockchip:
- Gamma LUT support
hisilicon:
- new HIBMC support
virtio-gpu:
- convert to helpers
- add prime support for scanout buffers
v3d:
- Add DRM_IOCTL_V3D_PERFMON_SET_GLOBAL
vc4:
- Add support for BCM2712
vkms:
- line-per-line compositing algorithm to improve performance
zynqmp:
- Add DP audio support
mediatek:
- dp: Add sdp path reset
- dp: Support flexible length of DP calibration data
etnaviv:
- add fdinfo memory support
- add explicit reset handling"
* tag 'drm-next-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel: (1070 commits)
drm/bridge: fix documentation for the hdmi_audio_prepare() callback
doc/cgroup: Fix title underline length
drm/doc: Include new drm-compute documentation
cgroup/dmem: Fix parameters documentation
cgroup/dmem: Select PAGE_COUNTER
kernel/cgroup: Remove the unused variable climit
drm/display: hdmi: Do not read EDID on disconnected connectors
drm/tests: hdmi: Add connector disablement test
drm/connector: hdmi: Do atomic check when necessary
drm/amd/display: 3.2.316
drm/amd/display: avoid reset DTBCLK at clock init
drm/amd/display: improve dpia pre-train
drm/amd/display: Apply DML21 Patches
drm/amd/display: Use HW lock mgr for PSR1
drm/amd/display: Revised for Replay Pseudo vblank control
drm/amd/display: Add a new flag for replay low hz
drm/amd/display: Remove unused read_ono_state function from Hwss module
drm/amd/display: Do not elevate mem_type change to full update
drm/amd/display: Do not wait for PSR disable on vbl enable
drm/amd/display: Remove unnecessary eDP power down
...
In commit
9e2ab4b18e ("ASoC: rockchip: i2s-tdm: Fix inaccurate sampling rates"),
the set_sysclk callback was removed as considered unused as the mclk rate
can be set in the hw_params callback.
The difference between hw_params and set_sysclk is that the former is
called with the audio sampling rate set in the params (e.g.: 48000 Hz)
while the latter is called with a clock rate already computed with
sampling_rate * mclk-fs (e.g.: 48000 * 256)
For HDMI audio using the Rockchip I2S TDM driver, the mclk-fs value must
be set to 128 instead of the default 256, and that value is set in the
device tree at the machine driver level (like a simple-audio-card
compatible node).
Therefore, the i2s_tdm driver has no idea that another mclk-fs value can
be configured and simply computes the mclk rate in the hw_params callback
with DEFAULT_MCLK_FS * params_rate(params), which is wrong for HDMI
audio.
Re-add the set_sysclk callback so that the mclk rate is computed by the
machine driver which has the correct mclk-fs value set in its device tree
node.
Fixes: 9e2ab4b18e ("ASoC: rockchip: i2s-tdm: Fix inaccurate sampling rates")
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Link: https://patch.msgid.link/20250117163102.65807-1-detlev.casanova@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:
1. Fix the suspend failure for memory to peripheral function.
2. Return error value for processing function.
ASoC: Updates for v6.14
This was quite a quiet release for what I imagine are holiday related
reasons, the diffstat is dominated by some Cirrus Logic Kunit tests.
There's the usual mix of small improvements and fixes, plus a few new
drivers and features. The diffstat includes some DRM changes due to
work on HDMI audio.
- Allow clocking on each DAI in an audio graph card to be configured
separately.
- Improved power management for Renesas RZ-SSI.
- KUnit testing for the Cirrus DSP framework.
- Memory to meory operation support for Freescale/NXP platforms.
- Support for pause operations in SOF.
- Support for Allwinner suinv F1C100s, Awinc AW88083, Realtek
ALC5682I-VE
ASRC memory to memory cases and memory to peripheral cases are
sharing the same pair pools, the pairs got for m2m suspend
function may be used for memory to peripheral, which is handled
memory to peripheral driver and can't be handled in
memory to memory suspend function.
Use the "pair->dma_buffer" as a flag for memory to memory case,
when it is allocated, handle the suspend operation for the related
pairs.
Fixes: 24a01710f6 ("ASoC: fsl_asrc_m2m: Add memory to memory function")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20250120081938.2501554-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clang warns (or errors with CONFIG_WERROR=y):
sound/pci/hda/tas2781_hda_spi.c:110:6: error: variable 'ret' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
110 | if (tas_priv->cur_book != TASDEVICE_BOOK_ID(reg)) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/pci/hda/tas2781_hda_spi.c:119:9: note: uninitialized use occurs here
119 | return ret;
| ^~~
sound/pci/hda/tas2781_hda_spi.c:110:2: note: remove the 'if' if its condition is always true
110 | if (tas_priv->cur_book != TASDEVICE_BOOK_ID(reg)) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/pci/hda/tas2781_hda_spi.c:108:9: note: initialize the variable 'ret' to silence this warning
108 | int ret;
| ^
| = 0
Sink the declaration of ret into the if block and just return 0 at the
end of the function, as there is nothing to do if cur_book has already
been changed.
Fixes: bb5f86ea50 ("ALSA: hda/tas2781: Add tas2781 hda SPI driver")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501192006.Hm9GmKiV-lkp@intel.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20250120-tas2781_hda_spi-fix-wsometimes-uninitialized-v1-1-d7fd104aa63e@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a new device_setup option (SCARLETT2_USE_FCP_DRIVER = 0x08) that
allows users to opt in to using the new FCP driver instead of the
existing scarlett2 driver for their device. This provides a way to
test the new FCP driver on existing supported hardware while keeping
the Scarlett2 driver as the default.
When the SCARLETT2_USE_FCP_DRIVER bit is set in device_setup, the
scarlett2 driver initialisation will hand off to the FCP driver
instead of proceeding with its own initialisation. The FCP driver then
provides access to the device via its hwdep interface.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://patch.msgid.link/94ffd7971d73cb0cbea6933b28f7528ce5b9edde.1737048528.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a new kernel driver for the Focusrite Control Protocol (FCP),
which is used by Focusrite Scarlett 2nd Gen, 3rd Gen, 4th Gen, Clarett
USB, Clarett+, and Vocaster series audio interfaces. This driver
provides a user-space control interface via ALSA's hwdep subsystem.
Unlike the existing Scarlett2 driver which implements all ALSA
controls in kernel space, this new FCP driver takes a different
approach by providing a minimal kernel interface that allows a
user-space driver to send FCP commands and receive notifications. The
only control implemented in kernel space is the Level Meter, since it
requires frequent polling of volatile data.
While this driver supports all interfaces that the Scarlett2 driver
works with, it is initially enabled only for 4th Gen 16i16, 18i16,
and 18i20 interfaces that are not supported by the Scarlett2 driver.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://patch.msgid.link/597741a9b1198b965561547511d3d345f91cba20.1737048528.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch was used to add TAS2781 devices on SPI support in sound/pci/hda.
It use ACPI node descript about parameters of TAS2781 on SPI, it like:
Scope (_SB.PC00.SPI0)
{
Device (GSPK)
{
Name (_HID, "TXNW2781") // _HID: Hardware ID
Method (_CRS, 0, NotSerialized)
{
Name (RBUF, ResourceTemplate ()
{
SpiSerialBusV2 (...)
SpiSerialBusV2 (...)
}
}
}
}
And in platform/x86/serial-multi-instantiate.c, those spi devices will be
added into system as a single SPI device, so TAS2781 SPI driver will
probe twice for every single SPI device. And driver will also parser
mono DSP firmware binary and RCA binary for itself.
The code support Realtek as the primary codec.
In patch version-10, add multi devices firmware binary support,
to compatble with windows driver, they can share same firmware binary.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20241216122008.15425-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
