Check in snd_intel_dsp_check_soundwire() that the pointer returned by
ACPI_HANDLE() is not NULL, before passing it on to other functions.
The original code assumed a non-NULL return, but if it was unexpectedly
NULL it would end up passed to acpi_walk_namespace() as the start
point, and would result in
[ 3.219028] BUG: kernel NULL pointer dereference, address:
0000000000000018
[ 3.219029] #PF: supervisor read access in kernel mode
[ 3.219030] #PF: error_code(0x0000) - not-present page
[ 3.219031] PGD 0 P4D 0
[ 3.219032] Oops: Oops: 0000 [#1] SMP NOPTI
[ 3.219035] CPU: 2 UID: 0 PID: 476 Comm: (udev-worker) Tainted: G S
AW E 6.17.0-rc5-test #1 PREEMPT(voluntary)
[ 3.219038] Tainted: [S]=CPU_OUT_OF_SPEC, [A]=OVERRIDDEN_ACPI_TABLE,
[W]=WARN, [E]=UNSIGNED_MODULE
[ 3.219040] RIP: 0010:acpi_ns_walk_namespace+0xb5/0x480
This problem was triggered by a bugged DSDT that the kernel couldn't parse.
But it shouldn't be possible to SEGFAULT the kernel just because of some
bugs in ACPI.
Fixes: 0650857570 ("ALSA: hda: add autodetection for SoundWire")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For Intel SKL and KBL platforms, it may be bound with one of three
HD-audio drivers (AVS, SOF and legacy). AVS is the preferred one when
DMIC is detected, and that's how it's defined in the snd-intel-dspcfg
config table.
But, when AVS driver is disabled (CONFIG_SND_SOC_INTEL_AVS=n), the
device may be bound freely with either SOF or legacy driver.
Before 6.17, the legacy driver took it primarily, but on 6.17, likely
due to the recent code shuffling, SOF driver seems taking it at first,
and fails to probe. For avoiding the regression, we should enforce to
bind those with the legacy HD-audio drvier when AVS is disabled.
This patch adds the extra two entries in intel-dspcfg table that are
applied only when CONFIG_SND_SOC_INTEL_AVS=n, for binding with the
legacy driver.
Note that there are entries for APL in that config table block, but
APL may be supported by SOF for certain setups, so the choice can't be
exclusive. Hence this patch includes only SKL and KBL.
Link: https://bugzilla.suse.com/show_bug.cgi?id=1248121
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250828141101.16294-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Allow built-in drivers, not just modular drivers, to use async
initial probing (Lukas Wunner)
- Support Immediate Readiness even on devices with no PM Capability
(Sean Christopherson)
- Consolidate definition of PCIE_RESET_CONFIG_WAIT_MS (100ms), the
required delay between a reset and sending config requests to a
device (Niklas Cassel)
- Add pci_is_display() to check for "Display" base class and use it
in ALSA hda, vfio, vga_switcheroo, vt-d (Mario Limonciello)
- Allow 'isolated PCI functions' (multi-function devices without a
function 0) for LoongArch, similar to s390 and jailhouse (Huacai
Chen)
Power control:
- Add ability to enable optional slot clock for cases where the PCIe
host controller and the slot are supplied by different clocks
(Marek Vasut)
PCIe native device hotplug:
- Fix runtime PM ref imbalance on Hot-Plug Capable ports caused by
misinterpreting a config read failure after a device has been
removed (Lukas Wunner)
- Avoid creating a useless PCIe port service device for pciehp if the
slot is handled by the ACPI hotplug driver (Lukas Wunner)
- Ignore ACPI hotplug slots when calculating depth of pciehp hotplug
ports (Lukas Wunner)
Virtualization:
- Save VF resizable BAR state and restore it after reset (Michał
Winiarski)
- Allow IOV resources (VF BARs) to be resized (Michał Winiarski)
- Add pci_iov_vf_bar_set_size() so drivers can control VF BAR size
(Michał Winiarski)
Endpoint framework:
- Add RC-to-EP doorbell support using platform MSI controller,
including a test case (Frank Li)
- Allow BAR assignment via configfs so platforms have flexibility in
determining BAR usage (Jerome Brunet)
Native PCIe controller drivers:
- Convert amazon,al-alpine-v[23]-pcie, apm,xgene-pcie,
axis,artpec6-pcie, marvell,armada-3700-pcie, st,spear1340-pcie to
DT schema format (Rob Herring)
- Use dev_fwnode() instead of of_fwnode_handle() to remove OF
dependency in altera (fixes an unused variable), designware-host,
mediatek, mediatek-gen3, mobiveil, plda, xilinx, xilinx-dma,
xilinx-nwl (Jiri Slaby, Arnd Bergmann)
- Convert aardvark, altera, brcmstb, designware-host, iproc,
mediatek, mediatek-gen3, mobiveil, plda, rcar-host, vmd, xilinx,
xilinx-dma, xilinx-nwl from using pci_msi_create_irq_domain() to
using msi_create_parent_irq_domain() instead; this makes the
interrupt controller per-PCI device, allows dynamic allocation of
vectors after initialization, and allows support of IMS (Nam Cao)
APM X-Gene PCIe controller driver:
- Rewrite MSI handling to MSI CPU affinity, drop useless CPU hotplug
bits, use device-managed memory allocations, and clean things up
(Marc Zyngier)
- Probe xgene-msi as a standard platform driver rather than a
subsys_initcall (Marc Zyngier)
Broadcom STB PCIe controller driver:
- Add optional DT 'num-lanes' property and if present, use it to
override the Maximum Link Width advertised in Link Capabilities
(Jim Quinlan)
Cadence PCIe controller driver:
- Use PCIe Message routing types from the PCI core rather than
defining private ones (Hans Zhang)
Freescale i.MX6 PCIe controller driver:
- Add IMX8MQ_EP third 64-bit BAR in epc_features (Richard Zhu)
- Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features
(Richard Zhu)
- Configure LUT for MSI/IOMMU in Endpoint mode so Root Complex can
trigger doorbel on Endpoint (Frank Li)
- Remove apps_reset (LTSSM_EN) from
imx_pcie_{assert,deassert}_core_reset(), which fixes a hotplug
regression on i.MX8MM (Richard Zhu)
- Delay Endpoint link start until configfs 'start' written (Richard
Zhu)
Intel VMD host bridge driver:
- Add Intel Panther Lake (PTL)-H/P/U Vendor ID (George D Sworo)
Qualcomm PCIe controller driver:
- Add DT binding and driver support for SA8255p, which supports ECAM
for Configuration Space access (Mayank Rana)
- Update DT binding and driver to describe PHYs and per-Root Port
resets in a Root Port stanza and deprecate describing them in the
host bridge; this makes it possible to support multiple Root Ports
in the future (Krishna Chaitanya Chundru)
- Add Qualcomm QCS615 to SM8150 DT binding (Ziyue Zhang)
- Add Qualcomm QCS8300 to SA8775p DT binding (Ziyue Zhang)
- Drop TBU and ref clocks from Qualcomm SM8150 and SC8180x DT
bindings (Konrad Dybcio)
- Document 'link_down' reset in Qualcomm SA8775P DT binding (Ziyue
Zhang)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Rockchip PCIe controller driver:
- Drop unused PCIe Message routing and code definitions (Hans Zhang)
- Remove several unused header includes (Hans Zhang)
- Use standard PCIe config register definitions instead of
rockchip-specific redefinitions (Geraldo Nascimento)
- Set Target Link Speed to 5.0 GT/s before retraining so we have a
chance to train at a higher speed (Geraldo Nascimento)
Rockchip DesignWare PCIe controller driver:
- Prevent race between link training and register update via DBI by
inhibiting link training after hot reset and link down (Wilfred
Mallawa)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Sophgo PCIe controller driver:
- Add DT binding and driver for Sophgo SG2044 PCIe controller driver
in Root Complex mode (Inochi Amaoto)
Synopsys DesignWare PCIe controller driver:
- Add required PCIE_RESET_CONFIG_WAIT_MS after waiting for Link up on
Ports that support > 5.0 GT/s. Slower Ports still rely on the
not-quite-correct PCIE_LINK_WAIT_SLEEP_MS 90ms default delay while
waiting for the Link (Niklas Cassel)"
* tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
dt-bindings: PCI: qcom,pcie-sa8775p: Document 'link_down' reset
dt-bindings: PCI: Remove 83xx-512x-pci.txt
dt-bindings: PCI: Convert amazon,al-alpine-v[23]-pcie to DT schema
dt-bindings: PCI: Convert marvell,armada-3700-pcie to DT schema
dt-bindings: PCI: Convert apm,xgene-pcie to DT schema
dt-bindings: PCI: Convert axis,artpec6-pcie to DT schema
dt-bindings: PCI: Convert st,spear1340-pcie to DT schema
PCI: Move is_pciehp check out of pciehp_is_native()
PCI: pciehp: Use is_pciehp instead of is_hotplug_bridge
PCI/portdrv: Use is_pciehp instead of is_hotplug_bridge
PCI/ACPI: Fix runtime PM ref imbalance on Hot-Plug Capable ports
selftests: pci_endpoint: Add doorbell test case
misc: pci_endpoint_test: Add doorbell test case
PCI: endpoint: pci-epf-test: Add doorbell test support
PCI: endpoint: Add pci_epf_align_inbound_addr() helper for inbound address alignment
PCI: endpoint: pci-ep-msi: Add checks for MSI parent and mutability
PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
PCI: dwc: Add Sophgo SG2044 PCIe controller driver in Root Complex mode
PCI: vmd: Switch to msi_create_parent_irq_domain()
PCI: vmd: Convert to lock guards
...
Pull timer cleanups from Thomas Gleixner:
"A treewide cleanup of struct cycle_counter const annotations.
The initial idea of making them const was correct as they were
seperate instances. When they got embedded into larger data
structures, which are even modified by the callback this got moot. The
only reason why this went unnoticed is that the required
container_of() casts the const attribute forcefully away.
Stop pretending that it is const"
* tag 'timers-cleanups-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time/timecounter: Fix the lie that struct cyclecounter is const
CONFIG_SND_HDA_PREALLOC_SIZE is used only by controller.c in
sound/hda/common, hence it depends on CONFIG_SND_HDA.
Move the definition to the right place inside SND_HDA if/endif block
in sound/hda/common/Kconfig.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250709160434.1859-5-tiwai@suse.de
This is a part of HD-audio code restructuring.
Simply move the current code of sound/hda/* into the subdirectory
sound/hda/core, so that more stuff can be moved into sound/hda cleanly
later.
Most of file names with hdac_ and hdac_ext_ prefix are renamed without
the prefix, since they can be identified well in the directory name
and superfluous.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250709160434.1859-3-tiwai@suse.de
