Cross-merge networking fixes after downstream PR (net-6.18-rc6).
No conflicts, adjacent changes in:
drivers/net/phy/micrel.c
96a9178a29 ("net: phy: micrel: lan8814 fix reset of the QSGMII interface")
61b7ade9ba ("net: phy: micrel: Add support for non PTP SKUs for lan8814")
and a trivial one in tools/testing/selftests/drivers/net/Makefile.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When smb_direct_disconnect_rdma_connection() turns SMBDIRECT_SOCKET_CREATED
into SMBDIRECT_SOCKET_ERROR, we'll have the situation that
smb_direct_disconnect_rdma_work() will set SMBDIRECT_SOCKET_DISCONNECTING
and call rdma_disconnect(), which likely fails as we never reached
the RDMA_CM_EVENT_ESTABLISHED. it means that
wait_event(sc->status_wait, sc->status == SMBDIRECT_SOCKET_DISCONNECTED)
in free_transport() will hang forever in SMBDIRECT_SOCKET_DISCONNECTING
never reaching SMBDIRECT_SOCKET_DISCONNECTED.
So we directly go from SMBDIRECT_SOCKET_CREATED to
SMBDIRECT_SOCKET_DISCONNECTED.
Fixes: b3fd52a0d8 ("smb: server: let smb_direct_disconnect_rdma_connection() set SMBDIRECT_SOCKET_ERROR...")
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When the per-IP connection limit is exceeded in ksmbd_kthread_fn(),
the code sets ret = -EAGAIN and continues the accept loop without
closing the just-accepted socket. That leaks one socket per rejected
attempt from a single IP and enables a trivial remote DoS.
Release client_sk before continuing.
This bug was found with ZeroPath.
Cc: stable@vger.kernel.org
Signed-off-by: Joshua Rogers <linux@joshua.hu>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
smb_direct_prepare_negotiation() posts a recv and then, if
smb_direct_accept_client() fails, calls put_recvmsg() on the same
buffer. That unmaps and recycles a buffer that is still posted on
the QP., which can lead to device DMA into unmapped or reused memory.
Track whether the recv was posted and only return it if it was never
posted. If accept fails after a post, leave it for teardown to drain
and complete safely.
Signed-off-by: Joshua Rogers <linux@joshua.hu>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Update all struct proto_ops bind() callback function prototypes from
"struct sockaddr *" to "struct sockaddr_unsized *" to avoid lying to the
compiler about object sizes. Calls into struct proto handlers gain casts
that will be removed in the struct proto conversion patch.
No binary changes expected.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20251104002617.2752303-2-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current ksmbd_rdma_capable_netdev fails to mark certain RDMA-capable
inerfaces such as IPoIB as RDMA capable after reverting GUID matching code
due to layer violation.
This patch check the ARPHRD_INFINIBAND type safely identifies an IPoIB
interface without introducing a layer violation, ensuring RDMA
functionality is correctly enabled for these interfaces.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If user set bridge interface as actual RDMA-capable NICs are lower devices,
ksmbd can not detect as RDMA capable. This patch can detect the RDMA
capable lower devices from bridge master or VLAN. With this change, ksmbd
can accept both TCP and RDMA connections through the same bridge IP
address, allowing mixed transport operation without requiring separate
interfaces.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
All handlers triggered by ib_drain_qp() should already see the
broken connection.
smb_direct_cm_handler() is called under a mutex of the rdma_cm,
we should make sure ib_drain_qp() and all rdma layer logic completes
and unlocks the mutex.
It means free_transport() will also already see the connection
as SMBDIRECT_SOCKET_DISCONNECTED, so we need to call
crdma_[un]lock_handler(sc->rdma.cm_id) around
ib_drain_qp(), rdma_destroy_qp(), ib_free_cq() and ib_dealloc_pd().
Otherwise we free resources while the ib_drain_qp() within
smb_direct_cm_handler() is still running.
We have to unlock before rdma_destroy_id() as it locks again.
Fixes: 141fa9824c ("ksmbd: call ib_drain_qp when disconnected")
Fixes: 4c564f03e2 ("smb: server: make use of common smbdirect_socket")
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
We now activate sc->recv_io.posted.refill_work and sc->idle.immediate_work
only after a successful negotiation, before sending the negotiation
response.
It means the queue_work(sc->workqueue, &sc->recv_io.posted.refill_work)
in put_recvmsg() of the negotiate request, is a no-op now.
It also means our explicit smb_direct_post_recv_credits() will
have queue_work(sc->workqueue, &sc->idle.immediate_work) as no-op.
This should make sure we don't have races and post any immediate
data_transfer message that tries to grant credits to the peer,
before we send the negotiation response, as that will grant
the initial credits to the peer.
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Fixes: 1cde0a74a7 ("smb: server: don't use delayed_work for post_recv_credits_work")
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
handle_response() dereferences the payload as a 4-byte handle without
verifying that the declared payload size is at least 4 bytes. A malformed
or truncated message from ksmbd.mountd can lead to a 4-byte read past the
declared payload size. Validate the size before dereferencing.
This is a minimal fix to guard the initial handle read.
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Cc: stable@vger.kernel.org
Reported-by: Qianchang Zhao <pioooooooooip@gmail.com>
Signed-off-by: Qianchang Zhao <pioooooooooip@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
We should wait for the rdma_cm to become SMBDIRECT_SOCKET_DISCONNECTED!
At least on the client side (with similar code)
wait_event_interruptible() often returns with -ERESTARTSYS instead of
waiting for SMBDIRECT_SOCKET_DISCONNECTED.
We should use wait_event() here too, which makes the code be identical
in client and server, which will help when moving to common functions.
Fixes: b31606097d ("smb: server: move smb_direct_disconnect_rdma_work() into free_transport()")
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This introduces logic to prevent on overflow of
the send submission queue with ib_post_send() easier.
As we first get a local credit and then a remote credit
before we mark us as pending.
From reading the git history of the linux smbdirect
implementations in client and server) it was seen
that a peer granted more credits than we requested.
I guess that only happened because of bugs in our
implementation which was active as client and server.
I guess Windows won't do that.
So the local credits make sure we only use the amount
of credits we asked for.
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
We have a list handling that is much easier to understand:
1. Before smb_direct_flush_send_list() is called all
struct smbdirect_send_io messages are part of
send_ctx->msg_list
2. Before smb_direct_flush_send_list() calls
smb_direct_post_send() we remove the last
element in send_ctx->msg_list and move all
others into last->sibling_list. As only
last has IB_SEND_SIGNALED and gets a completion
vis send_done().
3. send_done() has an easy way to free all others
in sendmsg->sibling_list (if there are any).
And use list_for_each_entry_safe() instead of
a complex custom logic.
This will help us to share send_done() in common
code soon, as it will work fine for the client too,
where last->sibling_list is currently always an empty list.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Make use of rdma_rw_mr_factor() to calculate the number of rw
credits and the number of pages per RDMA RW operation.
We get the same numbers for iWarp connections, tested
with siw.ko and irdma.ko (in iWarp mode).
siw:
CIFS: max_qp_rd_atom=128, max_fast_reg_page_list_len = 256
CIFS: max_sgl_rd=0, max_sge_rd=1
CIFS: responder_resources=32 max_frmr_depth=256 mr_io.type=0
CIFS: max_send_wr 384, device reporting max_cqe 3276800 max_qp_wr 32768
ksmbd: max_fast_reg_page_list_len = 256, max_sgl_rd=0, max_sge_rd=1
ksmbd: device reporting max_cqe 3276800 max_qp_wr 32768
ksmbd: Old sc->rw_io.credits: max = 9, num_pages = 256
ksmbd: New sc->rw_io.credits: max = 9, num_pages = 256, maxpages=2048
ksmbd: Info: rdma_send_wr 27 + max_send_wr 256 = 283
irdma (in iWarp mode):
CIFS: max_qp_rd_atom=127, max_fast_reg_page_list_len = 262144
CIFS: max_sgl_rd=0, max_sge_rd=13
CIFS: responder_resources=32 max_frmr_depth=2048 mr_io.type=0
CIFS: max_send_wr 384, device reporting max_cqe 1048574 max_qp_wr 4063
ksmbd: max_fast_reg_page_list_len = 262144, max_sgl_rd=0, max_sge_rd=13
ksmbd: device reporting max_cqe 1048574 max_qp_wr 4063
ksmbd: Old sc->rw_io.credits: max = 9, num_pages = 256
ksmbd: New sc->rw_io.credits: max = 9, num_pages = 256, maxpages=2048
ksmbd: rdma_send_wr 27 + max_send_wr 256 = 283
This means that we get the different correct numbers for ROCE,
tested with rdma_rxe.ko and irdma.ko (in RoCEv2 mode).
rxe:
CIFS: max_qp_rd_atom=128, max_fast_reg_page_list_len = 512
CIFS: max_sgl_rd=0, max_sge_rd=32
CIFS: responder_resources=32 max_frmr_depth=512 mr_io.type=0
CIFS: max_send_wr 384, device reporting max_cqe 32767 max_qp_wr 1048576
ksmbd: max_fast_reg_page_list_len = 512, max_sgl_rd=0, max_sge_rd=32
ksmbd: device reporting max_cqe 32767 max_qp_wr 1048576
ksmbd: Old sc->rw_io.credits: max = 9, num_pages = 256
ksmbd: New sc->rw_io.credits: max = 65, num_pages = 32, maxpages=2048
ksmbd: rdma_send_wr 65 + max_send_wr 256 = 321
irdma (in RoCEv2 mode):
CIFS: max_qp_rd_atom=127, max_fast_reg_page_list_len = 262144,
CIFS: max_sgl_rd=0, max_sge_rd=13
CIFS: responder_resources=32 max_frmr_depth=2048 mr_io.type=0
CIFS: max_send_wr 384, device reporting max_cqe 1048574 max_qp_wr 4063
ksmbd: max_fast_reg_page_list_len = 262144, max_sgl_rd=0, max_sge_rd=13
ksmbd: device reporting max_cqe 1048574 max_qp_wr 4063
ksmbd: Old sc->rw_io.credits: max = 9, num_pages = 256,
ksmbd: New sc->rw_io.credits: max = 159, num_pages = 13, maxpages=2048
ksmbd: rdma_send_wr 159 + max_send_wr 256 = 415
And rely on rdma_rw_init_qp() to setup ib_mr_pool_init() for
RW MRs. ib_mr_pool_destroy() will be called by rdma_rw_cleanup_mrs().
It seems the code was implemented before the rdma_rw_* layer
was fully established in the kernel.
While there also add additional space for ib_drain_qp().
This should make sure ib_post_send() will never fail
because the submission queue is full.
Fixes: ddbdc861e3 ("ksmbd: smbd: introduce read/write credits for RDMA read/write")
Fixes: 4c564f03e2 ("smb: server: make use of common smbdirect_socket")
Fixes: 177368b992 ("smb: server: make use of common smbdirect_socket_parameters")
Fixes: 95475d8886 ("smb: server: make use smbdirect_socket.rw_io.credits")
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull smb client fixes from Steve French:
"smb client fixes, security and smbdirect improvements, and some minor cleanup:
- Important OOB DFS fix
- Fix various potential tcon refcount leaks
- smbdirect (RDMA) fixes (following up from test event a few weeks
ago):
- Fixes to improve and simplify handling of memory lifetime of
smbdirect_mr_io structures, when a connection gets disconnected
- Make sure we really wait to reach SMBDIRECT_SOCKET_DISCONNECTED
before destroying resources
- Make sure the send/recv submission/completion queues are large
enough to avoid ib_post_send() from failing under pressure
- convert cifs.ko to use the recommended crypto libraries (instead of
crypto_shash), this also can improve performance
- Three small cleanup patches"
* tag '6.18-rc1-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: (24 commits)
smb: client: Consolidate cmac(aes) shash allocation
smb: client: Remove obsolete crypto_shash allocations
smb: client: Use HMAC-MD5 library for NTLMv2
smb: client: Use MD5 library for SMB1 signature calculation
smb: client: Use MD5 library for M-F symlink hashing
smb: client: Use HMAC-SHA256 library for SMB2 signature calculation
smb: client: Use HMAC-SHA256 library for key generation
smb: client: Use SHA-512 library for SMB3.1.1 preauth hash
cifs: parse_dfs_referrals: prevent oob on malformed input
smb: client: Fix refcount leak for cifs_sb_tlink
smb: client: let smbd_destroy() wait for SMBDIRECT_SOCKET_DISCONNECTED
smb: move some duplicate definitions to common/cifsglob.h
smb: client: let destroy_mr_list() keep smbdirect_mr_io memory if registered
smb: client: let destroy_mr_list() call ib_dereg_mr() before ib_dma_unmap_sg()
smb: client: call ib_dma_unmap_sg if mr->sgt.nents is not 0
smb: client: improve logic in smbd_deregister_mr()
smb: client: improve logic in smbd_register_mr()
smb: client: improve logic in allocate_mr_list()
smb: client: let destroy_mr_list() remove locked from the list
smb: client: let destroy_mr_list() call list_del(&mr->list)
...
Since commit 305853cce3 ("ksmbd: Fix race condition in RPC handle list
access"), ksmbd_session_rpc_method() attempts to lock sess->rpc_lock.
This causes hung connections / tasks when a client attempts to open
a named pipe. Using Samba's rpcclient tool:
$ rpcclient //192.168.1.254 -U user%password
$ rpcclient $> srvinfo
<connection hung here>
Kernel side:
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/0:0 state:D stack:0 pid:5021 tgid:5021 ppid:2 flags:0x00200000
Workqueue: ksmbd-io handle_ksmbd_work
Call trace:
__schedule from schedule+0x3c/0x58
schedule from schedule_preempt_disabled+0xc/0x10
schedule_preempt_disabled from rwsem_down_read_slowpath+0x1b0/0x1d8
rwsem_down_read_slowpath from down_read+0x28/0x30
down_read from ksmbd_session_rpc_method+0x18/0x3c
ksmbd_session_rpc_method from ksmbd_rpc_open+0x34/0x68
ksmbd_rpc_open from ksmbd_session_rpc_open+0x194/0x228
ksmbd_session_rpc_open from create_smb2_pipe+0x8c/0x2c8
create_smb2_pipe from smb2_open+0x10c/0x27ac
smb2_open from handle_ksmbd_work+0x238/0x3dc
handle_ksmbd_work from process_scheduled_works+0x160/0x25c
process_scheduled_works from worker_thread+0x16c/0x1e8
worker_thread from kthread+0xa8/0xb8
kthread from ret_from_fork+0x14/0x38
Exception stack(0x8529ffb0 to 0x8529fff8)
The task deadlocks because the lock is already held:
ksmbd_session_rpc_open
down_write(&sess->rpc_lock)
ksmbd_rpc_open
ksmbd_session_rpc_method
down_read(&sess->rpc_lock) <-- deadlock
Adjust ksmbd_session_rpc_method() callers to take the lock when necessary.
Fixes: 305853cce3 ("ksmbd: Fix race condition in RPC handle list access")
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull file->f_path constification from Al Viro:
"Only one thing was modifying ->f_path of an opened file - acct(2).
Massaging that away and constifying a bunch of struct path * arguments
in functions that might be given &file->f_path ends up with the
situation where we can turn ->f_path into an anon union of const
struct path f_path and struct path __f_path, the latter modified only
in a few places in fs/{file_table,open,namei}.c, all for struct file
instances that are yet to be opened"
* tag 'pull-f_path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (23 commits)
Have cc(1) catch attempts to modify ->f_path
kernel/acct.c: saner struct file treatment
configfs:get_target() - release path as soon as we grab configfs_item reference
apparmor/af_unix: constify struct path * arguments
ovl_is_real_file: constify realpath argument
ovl_sync_file(): constify path argument
ovl_lower_dir(): constify path argument
ovl_get_verity_digest(): constify path argument
ovl_validate_verity(): constify {meta,data}path arguments
ovl_ensure_verity_loaded(): constify datapath argument
ksmbd_vfs_set_init_posix_acl(): constify path argument
ksmbd_vfs_inherit_posix_acl(): constify path argument
ksmbd_vfs_kern_path_unlock(): constify path argument
ksmbd_vfs_path_lookup_locked(): root_share_path can be const struct path *
check_export(): constify path argument
export_operations->open(): constify path argument
rqst_exp_get_by_name(): constify path argument
nfs: constify path argument of __vfs_getattr()
bpf...d_path(): constify path argument
done_path_create(): constify path argument
...
Pull smb client updates from Steve French:
- Fix oops in crypt message
- Remove duplicate arc4 code
- Fix potential io_uring reconnect
- Two important directory leases fixes and three perf improvements
- Three minor cleanups
- Four debug improvements (e.g. for showing more information on leases,
and one for adding more helpful information on reconnect)
* tag '6.18-rc-part1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: client: force multichannel=off when max_channels=1
smb client: fix bug with newly created file in cached dir
smb: client: short-circuit negative lookups when parent dir is fully cached
smb: client: short-circuit in open_cached_dir_by_dentry() if !dentry
smb: client: remove pointless cfid->has_lease check
smb: client: transport: minor indentation style fix
smb: client: transport: avoid reconnects triggered by pending task work
smb: client: remove unused fid_lock
smb: client: update cfid->last_access_time in open_cached_dir_by_dentry()
smb: client: ensure open_cached_dir_by_dentry() only returns valid cfid
smb: client: account smb directory cache usage and per-tcon totals
smb: client: add drop_dir_cache module parameter to invalidate cached dirents
smb: client: show lease state as R/H/W (or NONE) in open_files
smb: client: fix crypto buffers in non-linear memory
smb: Use arc4 library instead of duplicate arc4 code
smb: client: add tcon information to smb2_reconnect() debug messages
Increases the number of bits for the hash table from 3 to 12.
The thousands of sessions and shares can be connected.
So the current 3-bit size can lead to frequent hash collisions.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Replace connection list with hash table to improve lookup performance.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This change introduces an error print using pr_info_ratelimited()
to prevent excessive logging. This message will inform the user that
the limit for maximum IP connections has been hit and what that
current count is, which can be useful for debugging and monitoring
connection limits.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This parameter set the maximum number of connections per ip address.
The default is 8.
Cc: stable@vger.kernel.org
Fixes: c0d41112f1 ("ksmbd: extend the connection limiting mechanism to support IPv6")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If client doesn't negotiate with SMB3.1.1 POSIX Extensions,
then proper error code won't be returned due to overwriting.
Return error immediately.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: Matvey Kovalev <matvey.kovalev@ispras.ru>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
cifs.ko request to copy overlapped range within the same file.
ksmbd is using vfs_copy_file_range for this, vfs_copy_file_range() does not
allow overlapped copying within the same file.
This patch use do_splice_direct() if offset and length are overlapped.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
we should use sock_create_kern() if the socket resides in kernel space.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This patch makes ksmbd thread names distinct by client IP address.
100943 ? S 0:00 [ksmbd:::ffff:10.177.110.57]
or
101752 ? S 0:00 [ksmbd:10.177.110.57]
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The 'sess->rpc_handle_list' XArray manages RPC handles within a ksmbd
session. Access to this list is intended to be protected by
'sess->rpc_lock' (an rw_semaphore). However, the locking implementation was
flawed, leading to potential race conditions.
In ksmbd_session_rpc_open(), the code incorrectly acquired only a read lock
before calling xa_store() and xa_erase(). Since these operations modify
the XArray structure, a write lock is required to ensure exclusive access
and prevent data corruption from concurrent modifications.
Furthermore, ksmbd_session_rpc_method() accessed the list using xa_load()
without holding any lock at all. This could lead to reading inconsistent
data or a potential use-after-free if an entry is concurrently removed and
the pointer is dereferenced.
Fix these issues by:
1. Using down_write() and up_write() in ksmbd_session_rpc_open()
to ensure exclusive access during XArray modification, and ensuring
the lock is correctly released on error paths.
2. Adding down_read() and up_read() in ksmbd_session_rpc_method()
to safely protect the lookup.
Fixes: a1f46c99d9 ("ksmbd: fix use-after-free in ksmbd_session_rpc_open")
Fixes: b685757c7b ("ksmbd: Implements sess->rpc_handle_list as xarray")
Cc: stable@vger.kernel.org
Signed-off-by: Yunseong Kim <ysk@kzalloc.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
fs/smb/common/cifs_arc4.c has an implementation of ARC4, but a copy of
this same code is also present in lib/crypto/arc4.c to serve the other
users of this legacy algorithm in the kernel. Remove the duplicate
implementation in fs/smb/, which seems to have been added because of a
misunderstanding, and just use the lib/crypto/ one.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull smb restructuring updates from Steve French:
"Large set of small restructuring smbdirect related patches for cifs.ko
and ksmbd.ko.
This is the next step in order to use common structures for smbdirect
handling across both modules. And also includes improved handling of
broken connections, as well as fixed negotiation as rdma resources.
Moving to common functions is planned for 6.19, as well as also
providing smbdirect via sockets to userspace (e.g. for samba to also
be able to use smbdirect for userspace server and userspace client
tools).
This was heavily reviewed and tested at the recent SMB3.1.1 test event
at SDC"
* tag 'v6.18-rc-part1-smb3-common' of git://git.samba.org/ksmbd: (159 commits)
smb: server: let smb_direct_flush_send_list() invalidate a remote key first
smb: server: make use of ib_alloc_cq_any() instead of ib_alloc_cq()
smb: server: make consitent use of spin_lock_irq{save,restore}() in transport_rdma.c
smb: server: let {free_transport,smb_direct_disconnect_rdma_{work,connection}}() wake up all wait queues
smb: server: let smb_direct_disconnect_rdma_connection() disable all work but disconnect_work
smb: server: fill in smbdirect_socket.first_error on error
smb: server: let smb_direct_disconnect_rdma_connection() set SMBDIRECT_SOCKET_ERROR...
smb: server: pass struct smbdirect_socket to smb_direct_send_negotiate_response()
smb: server: pass struct smbdirect_socket to {enqueue,get_first}_reassembly()
smb: server: pass struct smbdirect_socket to smb_direct_post_send_data()
smb: server: pass struct smbdirect_socket to post_sendmsg()
smb: server: pass struct smbdirect_socket to smb_direct_create_header()
smb: server: pass struct smbdirect_socket to manage_keep_alive_before_sending()
smb: server: pass struct smbdirect_socket to manage_credits_prior_sending()
smb: server: pass struct smbdirect_socket to calc_rw_credits()
smb: server: pass struct smbdirect_socket to wait_for_rw_credits()
smb: server: pass struct smbdirect_socket to wait_for_send_credits()
smb: server: pass struct smbdirect_socket to wait_for_credits()
smb: server: pass struct smbdirect_socket to smb_direct_flush_send_list()
smb: server: pass struct smbdirect_socket to smb_direct_post_send()
...
Pull vfs async directory updates from Christian Brauner:
"This contains further preparatory changes for the asynchronous directory
locking scheme:
- Add lookup_one_positive_killable() which allows overlayfs to
perform lookup that won't block on a fatal signal
- Unify the mount idmap handling in struct renamedata as a rename can
only happen within a single mount
- Introduce kern_path_parent() for audit which sets the path to the
parent and returns a dentry for the target without holding any
locks on return
- Rename kern_path_locked() as it is only used to prepare for the
removal of an object from the filesystem:
kern_path_locked() => start_removing_path()
kern_path_create() => start_creating_path()
user_path_create() => start_creating_user_path()
user_path_locked_at() => start_removing_user_path_at()
done_path_create() => end_creating_path()
NA => end_removing_path()"
* tag 'vfs-6.18-rc1.async' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
debugfs: rename start_creating() to debugfs_start_creating()
VFS: rename kern_path_locked() and related functions.
VFS/audit: introduce kern_path_parent() for audit
VFS: unify old_mnt_idmap and new_mnt_idmap in renamedata
VFS: discard err2 in filename_create()
VFS/ovl: add lookup_one_positive_killable()
Pull vfs workqueue updates from Christian Brauner:
"This contains various workqueue changes affecting the filesystem
layer.
Currently if a user enqueue a work item using schedule_delayed_work()
the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies
to schedule_work() that is using system_wq and queue_work(), that
makes use again of WORK_CPU_UNBOUND.
This replaces the use of system_wq and system_unbound_wq. system_wq is
a per-CPU workqueue which isn't very obvious from the name and
system_unbound_wq is to be used when locality is not required.
So this renames system_wq to system_percpu_wq, and system_unbound_wq
to system_dfl_wq.
This also adds a new WQ_PERCPU flag to allow the fs subsystem users to
explicitly request the use of per-CPU behavior. Both WQ_UNBOUND and
WQ_PERCPU flags coexist for one release cycle to allow callers to
transition their calls. WQ_UNBOUND will be removed in a next release
cycle"
* tag 'vfs-6.18-rc1.workqueue' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: WQ_PERCPU added to alloc_workqueue users
fs: replace use of system_wq with system_percpu_wq
fs: replace use of system_unbound_wq with system_dfl_wq
There is a mix of using spin_lock() and spin_lock_irq(), which
is confusing as IB_POLL_WORKQUEUE is used and no code would
be called from any interrupt. So using spin_lock() or even
mutexes would be ok.
But we'll soon share common code with the client, which uses
IB_POLL_SOFTIRQ.
And Documentation/kernel-hacking/locking.rst section
"Cheat Sheet For Locking" says:
- Otherwise (== data can be touched in an interrupt), use
spin_lock_irqsave() and
spin_unlock_irqrestore().
So in order to keep it simple and safe we use that version
now. It will help merging functions into common code and
have consistent locking in all cases.
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
