This will be used to implement a logic in order to make sure
we don't overflow the send submission queue for ib_post_send().
We will initialize the local credits with the
fixed sp->send_credit_target value, which matches
the reserved slots in the submission queue for ib_post_send().
We will be a local credit first and then wait for a remote credit,
if we managed to get both we are allowed to post an
IB_WR_SEND[_WITH_INV]. The local credit is given back to
the pool when we get the local ib_post_send() completion,
while remote credits are granted by the peer.
From reading the git history of the linux smbdirect
implementations in client and server) it was seen
that a peer granted more credits than we requested.
I guess that only happened because of bugs in our
implementation which was active as client and server.
I guess Windows won't do that.
So the local credits make sure we only use the amount
of credits we asked for.
The client already has some logic for this based on
smbdirect_socket.send_io.pending.count, but that
counts in the order direction and makes it complex it
share common logic for various credits classes.
That logic will be replaced soon.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
fs/smb/common/cifs_arc4.c has an implementation of ARC4, but a copy of
this same code is also present in lib/crypto/arc4.c to serve the other
users of this legacy algorithm in the kernel. Remove the duplicate
implementation in fs/smb/, which seems to have been added because of a
misunderstanding, and just use the lib/crypto/ one.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This safer to start with and allows common code not care about if the
caller uses these or not. E.g. sc->mr_io.recovery_work is only used
on the client...
Note disable_[delayed_]work_sync() requires a valid function pointer
in INIT_[DELAYED_]WORK(). The non _sync() version don't require it,
but as we need to use the _sync() version on cleanup we better use
it here too, it won't block anyway here...
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
MS-FSCC in section 2.1.2.7 LX SYMLINK REPARSE_DATA_BUFFER now contains
documentation about WSL symlink reparse point buffers.
https://learn.microsoft.com/en-us/openspecs/windows_protocols/ms-fscc/68337353-9153-4ee1-ac6b-419839c3b7ad
Fix the struct reparse_wsl_symlink_data_buffer to reflect buffer fields
according to the MS-FSCC documentation.
Fix the Linux SMB client to correctly fill the WSL symlink reparse point
buffer when creaing new WSL-style symlink. There was a mistake during
filling the data part of the reparse point buffer. It should starts with
bytes "\x02\x00\x00\x00" (which represents version 2) but this constant was
written as number 0x02000000 encoded in little endian, which resulted bytes
"\x00\x00\x00\x02". This change is fixing this mistake.
Fixes: 4e2043be5c ("cifs: Add support for creating WSL-style symlinks")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
During mount option processing and negotiation with the server, the
original user-specified rsize/wsize values were being modified directly.
This makes it impossible to recover these values after a connection
reset, leading to potential degraded performance after reconnection.
The other problem is that When negotiating read and write sizes, there are
cases where the negotiated values might calculate to zero, especially
during reconnection when server->max_read or server->max_write might be
reset. In general, these values come from the negotiation response.
According to MS-SMB2 specification, these values should be at least 65536
bytes.
This patch improves IO parameter handling:
1. Adds vol_rsize and vol_wsize fields to store the original user-specified
values separately from the negotiated values
2. Uses got_rsize/got_wsize flags to determine if values were
user-specified rather than checking for non-zero values, which is more
reliable
3. Adds a prevent_zero_iosize() helper function to ensure IO sizes are
never negotiated down to zero, which could happen in edge cases like
when server->max_read/write is zero
The changes make the CIFS client more resilient to unusual server
responses and reconnection scenarios, preventing potential failures
when IO sizes are calculated to be zero.
Signed-off-by: Wang Zhaolong <wangzhaolong1@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2.4.5 in [MS-DTYP].pdf describe the data type of num_aces as le16.
AceCount (2 bytes): An unsigned 16-bit integer that specifies the count
of the number of ACE records in the ACL.
Change it to le16 and add reserved field to smb_acl struct.
Reported-by: Igor Leite Ladessa <igor-ladessa@hotmail.com>
Tested-by: Igor Leite Ladessa <igor-ladessa@hotmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If the reparse point was not handled (indicated by the -EOPNOTSUPP from
ops->parse_reparse_point() call) but reparse tag is of type name surrogate
directory type, then treat is as a new mount point.
Name surrogate reparse point represents another named entity in the system.
From SMB client point of view, this another entity is resolved on the SMB
server, and server serves its content automatically. Therefore from Linux
client point of view, this name surrogate reparse point of directory type
crosses mount point.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
So, in order to avoid ending up with flexible-array members in the
middle of other structs, we use the `__struct_group()` helper to
separate the flexible arrays from the rest of the members in the
flexible structures. We then use the newly created tagged `struct
smb2_file_link_info_hdr` and `struct smb2_file_rename_info_hdr`
to replace the type of the objects causing trouble: `rename_info`
and `link_info` in `struct smb2_compound_vars`.
We also want to ensure that when new members need to be added to the
flexible structures, they are always included within the newly created
tagged structs. For this, we use `static_assert()`. This ensures that the
memory layout for both the flexible structure and the new tagged struct
is the same after any changes.
So, with these changes, fix 86 of the following warnings:
fs/smb/client/cifsglob.h:2335:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
fs/smb/client/cifsglob.h:2334:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Function parse_reparse_posix() parses NFS-style reparse points, which are
used only by Windows NFS server since Windows Server 2012 version. This
style is not understood by Microsoft POSIX/Interix/SFU/SUA subsystems.
So make it clear that parse_reparse_posix() function and reparse_posix_data
structure are not POSIX general, but rather NFS specific.
All reparse buffer structures are defined in common/smb2pdu.h and have
_buffer suffix. So move struct reparse_posix_data from client/cifspdu.h to
common/smb2pdu.h and rename it to reparse_nfs_data_buffer for consistency.
Note that also SMB specification in [MS-FSCC] document, section 2.1.2.6
defines it under name "Network File System (NFS) Reparse Data Buffer".
So use this name for consistency.
Having this structure in common/smb2pdu.h can be useful for ksmbd server
code as NFS-style reparse points is the preferred way for implementing
support for special files.
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Linux CIFS client currently does not implement readlink() for WSL-style
symlinks. It is only able to detect that file is of WSL-style symlink, but
is not able to read target symlink location.
Add this missing functionality and implement support for parsing content of
WSL-style symlink.
The important note is that symlink target location stored for WSL symlink
reparse point (IO_REPARSE_TAG_LX_SYMLINK) is in UTF-8 encoding instead of
UTF-16 (which is used in whole SMB protocol and also in all other symlink
styles). So for proper locale/cp support it is needed to do conversion from
UTF-8 to local_nls.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
There are only 4 different definitions between the client and server:
- STATUS_SERVER_UNAVAILABLE: from client/smb2status.h
- STATUS_FILE_NOT_AVAILABLE: from client/smb2status.h
- STATUS_NO_PREAUTH_INTEGRITY_HASH_OVERLAP: from server/smbstatus.h
- STATUS_INVALID_LOCK_RANGE: from server/smbstatus.h
Rename client/smb2status.h to common/smb2status.h, and merge the
2 different definitions of server to common header file.
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
