The initial m.delta[0] also needs to be checked against zero.
In addition, also drop the redundant logic that errors out for
lcn == 0 / m.delta[0] == 1 case.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Robert reported an infinite loop observed by two crafted images.
The root cause is that `clusterofs` can be larger than `lclustersize`
for !NONHEAD `lclusters` in corrupted subpage compact indexes, e.g.:
blocksize = lclustersize = 512 lcn = 6 clusterofs = 515
Move the corresponding check for full compress indexes to
`z_erofs_load_lcluster_from_disk()` to also cover subpage compact
compress indexes.
It also fixes the position of `m->type >= Z_EROFS_LCLUSTER_TYPE_MAX`
check, since it should be placed right after
`z_erofs_load_{compact,full}_lcluster()`.
Fixes: 8d2517aaee ("erofs: fix up compacted indexes for block size < 4096")
Fixes: 1a5223c182 ("erofs: do sanity check on m->type in z_erofs_load_compact_lcluster()")
Reported-by: Robert Morris <rtm@csail.mit.edu>
Closes: https://lore.kernel.org/r/35167.1760645886@localhost
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Robert recently reported two corrupted images that can cause system
crashes, which are related to the new encoded extents introduced
in Linux 6.15:
- The first one [1] has plen != 0 (e.g. plen == 0x2000000) but
(plen & Z_EROFS_EXTENT_PLEN_MASK) == 0. It is used to represent
special extents such as sparse extents (!EROFS_MAP_MAPPED), but
previously only plen == 0 was handled;
- The second one [2] has pa 0xffffffffffdcffed and plen 0xb4000,
then "cur [0xfffffffffffff000] += bvec.bv_len [0x1000]" in
"} while ((cur += bvec.bv_len) < end);" wraps around, causing an
out-of-bound access of pcl->compressed_bvecs[] in
z_erofs_submit_queue(). EROFS only supports 48-bit physical block
addresses (up to 1EiB for 4k blocks), so add a sanity check to
enforce this.
Fixes: 1d191b4ca5 ("erofs: implement encoded extent metadata")
Reported-by: Robert Morris <rtm@csail.mit.edu>
Closes: https://lore.kernel.org/r/75022.1759355830@localhost [1]
Closes: https://lore.kernel.org/r/80524.1760131149@localhost [2]
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
It is already performed in z_erofs_map_blocks_fo().
Also align the error message with that used for the uncompressed
inline layout.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Since all real encoded extents (directly handled by the decompression
subsystem) have a sane, limited maximum decoded length
(Z_EROFS_PCLUSTER_MAX_DSIZE), and the read-more policy is only applied
if needed.
However, it makes no sense to read more for non-encoded maps, such as
fragment extents, since such extents can be huge (up to i_size) and
there is no benefit to reading more at this layer.
For normal images, it does not really matter, but for crafted images
generated by syzbot, excessively large fragment extents can cause
read-more to run for an overly long time.
Reported-and-tested-by: syzbot+1a9af3ef3c84c5e14dcc@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/68c8583d.050a0220.2ff435.03a3.GAE@google.com
Fixes: b44686c839 ("erofs: fix large fragment handling")
Fixes: b15b2e307c ("erofs: support on-disk compressed fragments data")
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Currently, xattr name prefixes are forcibly placed into the packed
inode if the fragments feature is enabled, and users have no option
to put them in plain form directly on disk.
This is inflexible. First, as mentioned above, users should be able
to store unwrapped long xattr name prefixes unconditionally
(COMPAT_PLAIN_XATTR_PFX). Second, since we now have the new metabox
inode to store metadata, it should be used when available instead
of the packed inode.
Fixes: 414091322c ("erofs: implement metadata compression")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Since EROFS handles decompression in non-atomic contexts due to
uncontrollable decompression latencies and vmap() usage, it tries
to detect atomic contexts and only kicks off a kworker on demand
in order to reduce unnecessary scheduling overhead.
However, the current approach is insufficient and can lead to
sleeping function calls in invalid contexts, causing kernel
warnings and potential system instability. See the stacktrace [1]
and previous discussion [2].
The current implementation only checks rcu_read_lock_any_held(),
which behaves inconsistently across different kernel configurations:
- When CONFIG_DEBUG_LOCK_ALLOC is enabled: correctly detects
RCU critical sections by checking rcu_lock_map
- When CONFIG_DEBUG_LOCK_ALLOC is disabled: compiles to
"!preemptible()", which only checks preempt_count and misses
RCU critical sections
This patch introduces z_erofs_in_atomic() to provide comprehensive
atomic context detection:
1. Check RCU preemption depth when CONFIG_PREEMPTION is enabled,
as RCU critical sections may not affect preempt_count but still
require atomic handling
2. Always use async processing when CONFIG_PREEMPT_COUNT is disabled,
as preemption state cannot be reliably determined
3. Fall back to standard preemptible() check for remaining cases
The function replaces the previous complex condition check and ensures
that z_erofs always uses (kthread_)work in atomic contexts to minimize
scheduling overhead and prevent sleeping in invalid contexts.
[1] Problem stacktrace
[ 61.266692] BUG: sleeping function called from invalid context at kernel/locking/rtmutex_api.c:510
[ 61.266702] in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 107, name: irq/54-ufshcd
[ 61.266704] preempt_count: 0, expected: 0
[ 61.266705] RCU nest depth: 2, expected: 0
[ 61.266710] CPU: 0 UID: 0 PID: 107 Comm: irq/54-ufshcd Tainted: G W O 6.12.17 #1
[ 61.266714] Tainted: [W]=WARN, [O]=OOT_MODULE
[ 61.266715] Hardware name: schumacher (DT)
[ 61.266717] Call trace:
[ 61.266718] dump_backtrace+0x9c/0x100
[ 61.266727] show_stack+0x20/0x38
[ 61.266728] dump_stack_lvl+0x78/0x90
[ 61.266734] dump_stack+0x18/0x28
[ 61.266736] __might_resched+0x11c/0x180
[ 61.266743] __might_sleep+0x64/0xc8
[ 61.266745] mutex_lock+0x2c/0xc0
[ 61.266748] z_erofs_decompress_queue+0xe8/0x978
[ 61.266753] z_erofs_decompress_kickoff+0xa8/0x190
[ 61.266756] z_erofs_endio+0x168/0x288
[ 61.266758] bio_endio+0x160/0x218
[ 61.266762] blk_update_request+0x244/0x458
[ 61.266766] scsi_end_request+0x38/0x278
[ 61.266770] scsi_io_completion+0x4c/0x600
[ 61.266772] scsi_finish_command+0xc8/0xe8
[ 61.266775] scsi_complete+0x88/0x148
[ 61.266777] blk_mq_complete_request+0x3c/0x58
[ 61.266780] scsi_done_internal+0xcc/0x158
[ 61.266782] scsi_done+0x1c/0x30
[ 61.266783] ufshcd_compl_one_cqe+0x12c/0x438
[ 61.266786] __ufshcd_transfer_req_compl+0x2c/0x78
[ 61.266788] ufshcd_poll+0xf4/0x210
[ 61.266789] ufshcd_transfer_req_compl+0x50/0x88
[ 61.266791] ufshcd_intr+0x21c/0x7c8
[ 61.266792] irq_forced_thread_fn+0x44/0xd8
[ 61.266796] irq_thread+0x1a4/0x358
[ 61.266799] kthread+0x12c/0x138
[ 61.266802] ret_from_fork+0x10/0x20
[2] https://lore.kernel.org/r/58b661d0-0ebb-4b45-a10d-c5927fb791cd@paulmck-laptop
Signed-off-by: Junli Liu <liujunli@lixiang.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250805011957.911186-1-liujunli@lixiang.com
[ Gao Xiang: Use the original trace in v1. ]
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
The EROFS filesystem has many configurable options, controlled through
boolean Kconfig symbols. When enabled, these options may need to enable
additional library functionality elsewhere. Currently this is done by
selecting the symbol for the additional functionality. However, if
EROFS_FS itself is modular, and the target symbol is a tristate symbol,
the additional functionality is always forced built-in.
Selecting tristate symbols from a tristate symbol does keep modular
transitivity. Hence fix this by moving selects of tristate symbols to
the main EROFS_FS symbol.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/da1b899e511145dd43fd2d398f64b2e03c6a39e7.1753879351.git.geert+renesas@glider.be
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Pull mmap_prepare updates from Christian Brauner:
"Last cycle we introduce f_op->mmap_prepare() in c84bf6dd2b ("mm:
introduce new .mmap_prepare() file callback").
This is preferred to the existing f_op->mmap() hook as it does require
a VMA to be established yet, thus allowing the mmap logic to invoke
this hook far, far earlier, prior to inserting a VMA into the virtual
address space, or performing any other heavy handed operations.
This allows for much simpler unwinding on error, and for there to be a
single attempt at merging a VMA rather than having to possibly
reattempt a merge based on potentially altered VMA state.
Far more importantly, it prevents inappropriate manipulation of
incompletely initialised VMA state, which is something that has been
the cause of bugs and complexity in the past.
The intent is to gradually deprecate f_op->mmap, and in that vein this
series coverts the majority of file systems to using f_op->mmap_prepare.
Prerequisite steps are taken - firstly ensuring all checks for mmap
capabilities use the file_has_valid_mmap_hooks() helper rather than
directly checking for f_op->mmap (which is now not a valid check) and
secondly updating daxdev_mapping_supported() to not require a VMA
parameter to allow ext4 and xfs to be converted.
Commit bb666b7c27 ("mm: add mmap_prepare() compatibility layer for
nested file systems") handles the nasty edge-case of nested file
systems like overlayfs, which introduces a compatibility shim to allow
f_op->mmap_prepare() to be invoked from an f_op->mmap() callback.
This allows for nested filesystems to continue to function correctly
with all file systems regardless of which callback is used. Once we
finally convert all file systems, this shim can be removed.
As a result, ecryptfs, fuse, and overlayfs remain unaltered so they
can nest all other file systems.
We additionally do not update resctl - as this requires an update to
remap_pfn_range() (or an alternative to it) which we defer to a later
series, equally we do not update cramfs which needs a mixed mapping
insertion with the same issue, nor do we update procfs, hugetlbfs,
syfs or kernfs all of which require VMAs for internal state and hooks.
We shall return to all of these later"
* tag 'vfs-6.17-rc1.mmap_prepare' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
doc: update porting, vfs documentation to describe mmap_prepare()
fs: replace mmap hook with .mmap_prepare for simple mappings
fs: convert most other generic_file_*mmap() users to .mmap_prepare()
fs: convert simple use of generic_file_*_mmap() to .mmap_prepare()
mm/filemap: introduce generic_file_*_mmap_prepare() helpers
fs/xfs: transition from deprecated .mmap hook to .mmap_prepare
fs/ext4: transition from deprecated .mmap hook to .mmap_prepare
fs/dax: make it possible to check dev dax support without a VMA
fs: consistently use can_mmap_file() helper
mm/nommu: use file_has_valid_mmap_hooks() helper
mm: rename call_mmap/mmap_prepare to vfs_mmap/mmap_prepare
This patch supports to readahead more blocks in erofs_readdir(), it can
enhance readdir performance in large direcotry.
readdir test in a large directory which contains 12000 sub-files.
files_per_second
Before: 926385.54
After: 2380435.562
Meanwhile, let's introduces a new sysfs entry to control readahead
bytes to provide more flexible policy for readahead of readdir().
- location: /sys/fs/erofs/<disk>/dir_ra_bytes
- default value: 16384
- disable readahead: set the value to 0
Signed-off-by: Chao Yu <chao@kernel.org>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250721021352.2495371-1-chao@kernel.org
[ Gao Xiang: minor styling adjustment. ]
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Filesystem metadata has a high degree of redundancy, so it should
compress well in the general case.
Although metadata compression can increase overall I/O latency, many
users care more about minimized image sizes than extreme runtime
performance. Let's implement metadata compression in response to user
requests [1].
Actually, it's quite simple to implement metadata compression: since
EROFS already supports per-inode compression, we can simply treat a
special inode (called `the metabox inode`) as a container for compressed
inode metadata. Since EROFS supports multiple algorithms, users can
even specify LZ4 for metadata and LZMA for data.
To better support incremental builds, the MSB of NIDs indicates where
the inode metadata is located: if bit 63 is set, the inode itself should
be read from `the metabox inode`.
Optionally, shared xattrs can also be kept in `the metabox inode` if
COMPAT_SHARED_EA_IN_METABOX is set.
[1] https://issues.redhat.com/browse/RHEL-75783
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Acked-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20250717070804.1446345-2-hsiangkao@linux.alibaba.com
Fragments aren't limited by Z_EROFS_PCLUSTER_MAX_DSIZE. However, if
a fragment's logical length is larger than Z_EROFS_PCLUSTER_MAX_DSIZE
but the fragment is not the whole inode, it currently returns
-EOPNOTSUPP because m_flags has the wrong EROFS_MAP_ENCODED flag set.
It is not intended by design but should be rare, as it can only be
reproduced by mkfs with `-Eall-fragments` in a specific case.
Let's normalize fragment m_flags using the new EROFS_MAP_FRAGMENT.
Reported-by: Axel Fontaine <axel@axelfontaine.com>
Closes: https://github.com/erofs/erofs-utils/issues/23
Fixes: 7c3ca1838a ("erofs: restrict pcluster size limitations")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250711195826.3601157-1-hsiangkao@linux.alibaba.com
Update nearly all generic_file_mmap() and generic_file_readonly_mmap()
callers to use generic_file_mmap_prepare() and
generic_file_readonly_mmap_prepare() respectively.
We update blkdev, 9p, afs, erofs, ext2, nfs, ntfs3, smb, ubifs and vboxsf
file systems this way.
Remaining users we cannot yet update are ecryptfs, fuse and cramfs. The
former two are nested file systems that must support any underlying file
ssytem, and cramfs inserts a mixed mapping which currently requires a VMA.
Once all file systems have been converted to mmap_prepare(), we can then
update nested file systems.
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/08db85970d89b17a995d2cffae96fb4cc462377f.1750099179.git.lorenzo.stoakes@oracle.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Previously, file operations on a file-backed mount used the current
process' credentials to access the backing FD. Attempting to do so on
Android lead to SELinux denials, as ACL rules on the backing file (e.g.
/system/apex/foo.apex) is restricted to a small set of process.
Arguably, this error is redundant and leaking implementation details, as
access to files on a mount is already ACL'ed by path.
Instead, override to use the opener's cred when accessing the backing
file. This makes the behavior similar to a loop-backed mount, which
uses kworker cred when accessing the backing file and does not cause
SELinux denials.
Signed-off-by: Tatsuyuki Ishi <ishitatsuyuki@google.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://lore.kernel.org/r/20250612-b4-erofs-impersonate-v1-1-8ea7d6f65171@google.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Pull netfs updates from Christian Brauner:
- The main API document has been extensively updated/rewritten
- Fix an oops in write-retry due to mis-resetting the I/O iterator
- Fix the recording of transferred bytes for short DIO reads
- Fix a request's work item to not require a reference, thereby
avoiding the need to get rid of it in BH/IRQ context
- Fix waiting and waking to be consistent about the waitqueue used
- Remove NETFS_SREQ_SEEK_DATA_READ, NETFS_INVALID_WRITE,
NETFS_ICTX_WRITETHROUGH, NETFS_READ_HOLE_CLEAR,
NETFS_RREQ_DONT_UNLOCK_FOLIOS, and NETFS_RREQ_BLOCKED
- Reorder structs to eliminate holes
- Remove netfs_io_request::ractl
- Only provide proc_link field if CONFIG_PROC_FS=y
- Remove folio_queue::marks3
- Fix undifferentiation of DIO reads from unbuffered reads
* tag 'vfs-6.16-rc1.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
netfs: Fix undifferentiation of DIO reads from unbuffered reads
netfs: Fix wait/wake to be consistent about the waitqueue used
netfs: Fix the request's work item to not require a ref
netfs: Fix setting of transferred bytes with short DIO reads
netfs: Fix oops in write-retry from mis-resetting the subreq iterator
fs/netfs: remove unused flag NETFS_RREQ_BLOCKED
fs/netfs: remove unused flag NETFS_RREQ_DONT_UNLOCK_FOLIOS
folio_queue: remove unused field `marks3`
fs/netfs: declare field `proc_link` only if CONFIG_PROC_FS=y
fs/netfs: remove `netfs_io_request.ractl`
fs/netfs: reorder struct fields to eliminate holes
fs/netfs: remove unused enum choice NETFS_READ_HOLE_CLEAR
fs/netfs: remove unused flag NETFS_ICTX_WRITETHROUGH
fs/netfs: remove unused source NETFS_INVALID_WRITE
fs/netfs: remove unused flag NETFS_SREQ_SEEK_DATA_READ
When attempting to use an archive file, such as APEX on android,
as a file-backed mount source, it fails because EROFS image within
the archive file does not start at offset 0. As a result, a loop
or a dm device is still needed to attach the image file at an
appropriate offset first. Similarly, if an EROFS image within a
block device does not start at offset 0, it cannot be mounted
directly either.
To address this issue, this patch adds a new mount option `fsoffset=x'
to accept a start offset for the primary device. The offset should be
aligned to the block size. EROFS will add this offset before performing
read requests.
Signed-off-by: Sheng Yong <shengyong1@xiaomi.com>
Signed-off-by: Wang Shuai <wangshuai12@xiaomi.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250517090544.2687651-1-shengyong1@xiaomi.com
[ Gao Xiang: minor update on documentation and the error message. ]
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
When the netfs_io_request struct's work item is queued, it must be supplied
with a ref to the work item struct to prevent it being deallocated whilst
on the queue or whilst it is being processed. This is tricky to manage as
we have to get a ref before we try and queue it and then we may find it's
already queued and is thus already holding a ref - in which case we have to
try and get rid of the ref again.
The problem comes if we're in BH or IRQ context and need to drop the ref:
if netfs_put_request() reduces the count to 0, we have to do the cleanup -
but the cleanup may need to wait.
Fix this by adding a new work item to the request, ->cleanup_work, and
dispatching that when the refcount hits zero. That can then synchronously
cancel any outstanding work on the main work item before doing the cleanup.
Adding a new work item also deals with another problem upstream where it's
sometimes changing the work func in the put function and requeuing it -
which has occasionally in the past caused the cleanup to happen
incorrectly.
As a bonus, this allows us to get rid of the 'was_async' parameter from a
bunch of functions. This indicated whether the put function might not be
permitted to sleep.
Fixes: 3d3c950467 ("netfs: Provide readahead and readpage netfs helpers")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250519090707.2848510-4-dhowells@redhat.com
cc: Paulo Alcantara <pc@manguebit.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Steve French <stfrench@microsoft.com>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Currently, when EROFS is built with per-CPU workers, the workers are
started and CPU hotplug hooks are registered during module initialization.
This leads to unnecessary worker start/stop cycles during CPU hotplug
events, particularly on Android devices that frequently suspend and resume.
This change defers the initialization of per-CPU workers and the
registration of CPU hotplug hooks until the first EROFS mount. This
ensures that these resources are only allocated and managed when EROFS is
actually in use.
The tear down of per-CPU workers and unregistration of CPU hotplug hooks
still occurs during z_erofs_exit_subsystem(), but only if they were
initialized.
Signed-off-by: Sandeep Dhavale <dhavale@google.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20250506225743.308517-1-dhavale@google.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
For multiple devices, both primary and extra devices should be the
same type. `erofs_init_device` has already guaranteed that if the
primary is a file-backed device, extra devices should also be
regular files.
However, if the primary is a block device while the extra device
is a file-backed device, `erofs_init_device` will get an ENOTBLK,
which is not treated as an error in `erofs_fc_get_tree`, and that
leads to an UAF:
erofs_fc_get_tree
get_tree_bdev_flags(erofs_fc_fill_super)
erofs_read_superblock
erofs_init_device // sbi->dif0 is not inited yet,
// return -ENOTBLK
deactivate_locked_super
free(sbi)
if (err is -ENOTBLK)
sbi->dif0.file = filp_open() // sbi UAF
So if -ENOTBLK is hitted in `erofs_init_device`, it means the
primary device must be a block device, and the extra device
is not a block device. The error can be converted to -EINVAL.
Fixes: fb17675026 ("erofs: add file-backed mount support")
Signed-off-by: Sheng Yong <shengyong1@xiaomi.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://lore.kernel.org/r/20250515014837.3315886-1-shengyong1@xiaomi.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
EROFS uses NID to indicate the on-disk inode offset, which can
exceed 32 bits. However, the default encode_fh uses the ino32,
thus it doesn't work if the image is larger than 128GiB.
Let's introduce our own helpers to encode file handles.
It's easy to reproduce:
1. prepare an erofs image with nid bigger than U32_MAX
2. mount -t erofs foo.img /mnt/erofs
3. set exportfs with configuration: /mnt/erofs *(rw,sync,
no_root_squash)
4. mount -t nfs $IP:/mnt/erofs /mnt/nfs
5. md5sum /mnt/nfs/foo # foo is the file which nid bigger
than U32_MAX. # you will get ESTALE error.
In the case of overlayfs, the underlying filesystem's file
handle is encoded in ovl_fb.fid, which is similar to NFS's
case. If the NID of file is larger than U32_MAX, the overlay
will get -ESTALE error when calls exportfs_decode_fh.
Fixes: 3e917cc305 ("erofs: make filesystem exportable")
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250507094015.14007-1-lihongbo22@huawei.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
When compressed data deduplication is enabled, multiple logical extents
may reference the same compressed physical cluster.
The previous commit 94c43de735 ("erofs: fix wrong primary bvec
selection on deduplicated extents") already avoids using shortened
bvecs. However, in such cases, the extra temporary buffers also
need to be preserved for later use in z_erofs_fill_other_copies() to
to prevent data corruption.
IOWs, extra temporary buffers have to be retained not only due to
varying start relative offsets (`pageofs_out`, as indicated by
`pcl->multibases`) but also because of shortened bvecs.
android.hardware.graphics.composer@2.1.so : 270696 bytes
0: 0.. 204185 | 204185 : 628019200.. 628084736 | 65536
-> 1: 204185.. 225536 | 21351 : 544063488.. 544129024 | 65536
2: 225536.. 270696 | 45160 : 0.. 0 | 0
com.android.vndk.v28.apex : 93814897 bytes
...
364: 53869896..54095257 | 225361 : 543997952.. 544063488 | 65536
-> 365: 54095257..54309344 | 214087 : 544063488.. 544129024 | 65536
366: 54309344..54514557 | 205213 : 544129024.. 544194560 | 65536
...
Both 204185 and 54095257 have the same start relative offset of 3481,
but the logical page 55 of `android.hardware.graphics.composer@2.1.so`
ranges from 225280 to 229632, forming a shortened bvec [225280, 225536)
that cannot be used for decompressing the range from 54095257 to
54309344 of `com.android.vndk.v28.apex`.
Since `pcl->multibases` is already meaningless, just mark `be->keepxcpy`
on demand for simplicity.
Again, this issue can only lead to data corruption if `-Ededupe` is on.
Fixes: 94c43de735 ("erofs: fix wrong primary bvec selection on deduplicated extents")
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250506101850.191506-1-hsiangkao@linux.alibaba.com
If bio_add_folio() fails (because it is full),
erofs_fileio_scan_folio() needs to submit the I/O request via
erofs_fileio_rq_submit() and allocate a new I/O request with an empty
`struct bio`. Then it retries the bio_add_folio() call.
However, at this point, erofs_onlinefolio_split() has already been
called which increments `folio->private`; the retry will call
erofs_onlinefolio_split() again, but there will never be a matching
erofs_onlinefolio_end() call. This leaves the folio locked forever
and all waiters will be stuck in folio_wait_bit_common().
This bug has been added by commit ce63cb62d7 ("erofs: support
unencoded inodes for fileio"), but was practically unreachable because
there was room for 256 folios in the `struct bio` - until commit
9f74ae8c9a ("erofs: shorten bvecs[] for file-backed mounts") which
reduced the array capacity to 16 folios.
It was now trivial to trigger the bug by manually invoking readahead
from userspace, e.g.:
posix_fadvise(fd, 0, st.st_size, POSIX_FADV_WILLNEED);
This should be fixed by invoking erofs_onlinefolio_split() only after
bio_add_folio() has succeeded. This is safe: asynchronous completions
invoking erofs_onlinefolio_end() will not unlock the folio because
erofs_fileio_scan_folio() is still holding a reference to be released
by erofs_onlinefolio_end() at the end.
Fixes: ce63cb62d7 ("erofs: support unencoded inodes for fileio")
Fixes: 9f74ae8c9a ("erofs: shorten bvecs[] for file-backed mounts")
Cc: stable@vger.kernel.org
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Reviewed-by: Gao Xiang <xiang@kernel.org>
Tested-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://lore.kernel.org/r/20250428230933.3422273-1-max.kellermann@ionos.com
Signed-off-by: Gao Xiang <xiang@kernel.org>
Pull erofs fixes from Gao Xiang:
- Properly handle errors when file-backed I/O fails
- Fix compilation issues on ARM platform (arm-linux-gnueabi)
- Fix parsing of encoded extents
- Minor cleanup
* tag 'erofs-for-6.15-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: remove duplicate code
erofs: fix encoded extents handling
erofs: add __packed annotation to union(__le16..)
erofs: set error to bio if file-backed IO fails
