Pull watchdog updates from Wim Van Sebroeck:
- renesas,wdt: Add support for RZ/T2H and RZ/N2H
- Add SMARC-sAM67 support
- Several small fixes and improvements
* tag 'linux-watchdog-6.18-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog/hpwdt New maintianer
dt-bindings: watchdog: add SMARC-sAM67 support
watchdog: mpc8xxx_wdt: Reload the watchdog timer when enabling the watchdog
watchdog: visconti: don't print superfluous errors
watchdog: rzv2h_wdt: don't print superfluous errors
watchdog: rzg2l_wdt: don't print superfluous errors
watchdog: s3c2410_wdt: exynosautov9: Enable supported features
watchdog: s3c2410_wdt: exynosautov920: Enable QUIRK_HAS_32BIT_CNT
watchdog: s3c2410_wdt: Increase max timeout value of watchdog
watchdog: s3c2410_wdt: Fix max_timeout being calculated larger
watchdog: s3c2410_wdt: Replace hardcoded values with macro definitions
watchdog: rzv2h: Improve error strings and add newlines
watchdog: rzv2h: Add support for RZ/T2H
watchdog: rzv2h: Add support for configurable count clock source
watchdog: rzv2h: Make "oscclk" and reset controller optional
watchdog: rzv2h: Obtain clock-divider and timeout values from OF match data
dt-bindings: watchdog: renesas,wdt: Add support for RZ/T2H and RZ/N2H
watchdog: intel_oc_wdt: Do not try to write into const memory
When the watchdog gets enabled with this driver, it leaves enough time
for the core watchdog subsystem to start pinging it. But when the
watchdog is already started by hardware or by the boot loader, little
time remains before it fires and it happens that the core watchdog
subsystem doesn't have time to start pinging it.
Until commit 19ce9490aa ("watchdog: mpc8xxx: use the core worker
function") pinging was managed by the driver itself and the watchdog
was immediately pinged by setting the timer expiry to 0.
So restore similar behaviour by pinging it when enabling it so that
if it was already enabled the watchdog timer counter is reloaded.
Fixes: 19ce9490aa ("watchdog: mpc8xxx: use the core worker function")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Increase max_timeout value from 55s to 3665038s (1018h 3min 58s) with
38400000 frequency system if the system has 32-bit WTCNT register.
cat /sys/class/watchdog/watchdog0/max_timeout
3665038
[ 0.330082] s3c2410-wdt 10060000.watchdog_cl0: Heartbeat: count=1099511400000, timeout=3665038, freq=300000
[ 0.330087] s3c2410-wdt 10060000.watchdog_cl0: Heartbeat: timeout=3665038, divisor=256, count=1099511400000 (fffffc87)
[ 0.330127] s3c2410-wdt 10060000.watchdog_cl0: starting watchdog timer
[ 0.330134] s3c2410-wdt 10060000.watchdog_cl0: Starting watchdog: count=0xfffffc87, wtcon=0001ff39
[ 0.330319] s3c2410-wdt 10060000.watchdog_cl0: watchdog active, reset enabled, irq disabled
If the system has a 32-bit WTCNT, add QUIRK_HAS_32BIT_CNT to its quirk flags,
and it will operate with a 32-bit counter. If not, it will operate with a 16-bit
counter like in the previous version.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Fix the issue of max_timeout being calculated larger than actual value.
The calculation result of freq / (S3C2410_WTCON_PRESCALE_MAX + 1) /
S3C2410_WTCON_MAXDIV is smaller than the actual value because the remainder
is discarded during the calculation process. This leads to a larger
calculated value for max_timeout compared to the actual settable value.
To resolve this issue, the order of calculations in the computation process
has been adjusted.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Modify the code to utilize macro-defined values instead of hardcoded
values. The value 0x100 in the s3c2410wdt_set_heartbeat function represents
S3C2410_WTCON_PRESCALE_MAX + 1, but it is hardcoded, making its meaning
difficult to understand and reducing code readability.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Add support for the RZ/T2H watchdog timer. The RZ/T2H requires control of
the watchdog counter using the WDT Debug Control Register (WDTDCR), which
allows explicitly stopping and starting the counter. This behavior differs
from RZ/V2H, which doesn't have WDTDCR, so the driver is extended to handle
this requirement.
To support this, a new `wdtdcr` flag is introduced in the `rzv2h_of_data`
structure. When set, the driver maps the WDTDCR register and uses it to
control the watchdog counter in the start, stop, and restart callbacks.
Additionally, the clock divisor and count source for RZ/T2H are defined
to match its hardware configuration.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Add support for selecting the count clock source used by the watchdog
timer. The RZ/V2H(P) SoC uses the LOCO as the count source, whereas on
RZ/T2H and RZ/N2H SoCs, the count source is the peripheral clock (PCLKL).
Introduce a `count_source` field in the SoC-specific data structure and
refactor the clock rate selection logic accordingly. This prepares the
driver for supporting the RZ/T2H and RZ/N2H SoCs, which differ in their
watchdog clocking architecture from RZ/V2H(P).
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Update the rzv2h_wdt driver to make the "oscclk" clock and reset
controller optional.
Use devm_clk_get_optional_prepared() to obtain the "oscclk" clock,
allowing the driver to work on platforms that do not provide this clock,
such as the RZ/T2H SoC.
Similarly, use devm_reset_control_get_optional_exclusive() to allow the
driver to function on platforms that lack a reset controller.
These changes are preparatory steps for supporting the RZ/T2H SoC, which
does not provide an "oscclk" clock or a reset controller.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Update the rzv2h_wdt driver to fetch clock configuration and timeout
parameters from device tree match data rather than relying on hardcoded
constants. Introduce a new structure rzv2h_of_data that encapsulates
minimum and maximum clock select values (cks_min and cks_max), clock
divider (cks_div), timeout cycle count (timeout_cycles), and the
timeout period select bits (tops). These values are provided through
the OF match table and retrieved via of_device_get_match_data() during
probe.
This change allows dynamic configuration of the watchdog timer for
different SoCs, such as the RZ/T2H, which require different settings.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The MediaTek implementation of the sbsa_gwdt watchdog has a race
condition where a write to SBSA_GWDT_WRR is ignored if it occurs while
the hardware is processing a timeout refresh that asserts WS0.
Detect this based on the hardware implementer and adjust
wdd->min_hw_heartbeat_ms to avoid the race by forcing the keepalive ping
to be one second later.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250721230640.2244915-1-aplattner@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The driver probes with the invalid timeout value when
'iTCO_wdt_set_timeout()' fails, as its return value is not checked. In
this case, when executing "wdctl", we may get:
Device: /dev/watchdog0
Timeout: 30 seconds
Timeleft: 613 seconds
The timeout value is the value of "heartbeat" or "WATCHDOG_TIMEOUT", and
the timeleft value is calculated from the register value we actually read
(0xffff) by masking with 0x3ff and converting ticks to seconds (* 6 / 10).
Add error handling to return the failure code if 'iTCO_wdt_set_timeout()'
fails, ensuring the driver probe fails and prevents invalid operation.
Signed-off-by: Ziyan Fu <fuzy5@lenovo.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250704073518.7838-1-13281011316@163.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Use the newly added of_reserved_mem_region_to_resource() function to
handle "memory-region" properties.
The error handling is a bit different. "memory-region" is optional, so
failed lookup is not an error. But then an error in
of_address_to_resource() is treated as an error. However, that
distinction is not really important. Either the region is available
and usable or it is not. So now, it is just
of_reserved_mem_region_to_resource() which is checked for an error.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250703183518.2075108-1-robh@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Pull watchdog updates from Wim Van Sebroeck:
- Add watchdog timer for the NXP S32 platform
- Add driver for Intel OC WDT
- Add exynos990-wdt
- Various other fixes and improvements
* tag 'linux-watchdog-6.16-rc1' of git://www.linux-watchdog.org/linux-watchdog: (22 commits)
watchdog: iTCO_wdt: Update the heartbeat value after clamping timeout
watchdog: Add driver for Intel OC WDT
watchdog: arm_smc_wdt: get wdt status through SMCWD_GET_TIMELEFT
watchdog: iTCO: Drop driver-internal locking
watchdog: apple: set max_hw_heartbeat_ms instead of max_timeout
watchdog: qcom: introduce the device data for IPQ5424 watchdog device
dt-bindings: watchdog: renesas,wdt: Document RZ/V2N (R9A09G056) support
watchdog: lenovo_se30_wdt: Fix possible devm_ioremap() NULL pointer dereference in lenovo_se30_wdt_probe()
watchdog: s3c2410_wdt: Add exynos990-wdt compatible data
dt-bindings: watchdog: samsung-wdt: Add exynos990-wdt compatible
dt-bindings: watchdog: Add rk3562 compatible
dt-bindings: watchdog: fsl,scu-wdt: Document imx8qm
watchdog: Add the Watchdog Timer for the NXP S32 platform
dt-bindings: watchdog: Add NXP Software Watchdog Timer
watchdog: Correct kerneldoc warnings
watchdog: stm32: Fix wakeup source leaks on device unbind
watchdog: Do not enable by default during compile testing
watchdog: cros-ec: Avoid -Wflex-array-member-not-at-end warning
watchdog: da9052_wdt: respect TWDMIN
watchdog: da9052_wdt: do not disable wdt during probe
...
When executing "modprobe iTCO_wdt heartbeat=700", the user-specified
'heartbeat' parameter exceeds the valid range, the driver clamps the
timeout to default 30s but fails to update the logged 'heartbeat' value,
resulting in misleading log output:
iTCO_wdt iTCO_wdt: timeout value out of range, using 30
iTCO_wdt iTCO_wdt: initialized. heartbeat=700 sec (nowayout=0)
After validating the range, update the 'heartbeat' value with the clamped
timeout value to ensure that log messages accurately reflect the actual
runtime parameters.
Signed-off-by: Ziyan Fu <fuzy5@lenovo.com>
Reviewed-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Link: https://lore.kernel.org/r/20250429102533.11886-1-13281011316@163.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The hardware only supports timeouts slightly below 3mins, but by using
max_hw_heartbeat_ms we can let the kernel take care of supporting larger
timeouts than that requested from userspace.
Switching to max_hw_heartbeat_ms also means our set_timeout function now
needs to configure the hardware to the minimum of either the requested
timeout (in seconds) or the maximum supported by the user (in seconds).
Signed-off-by: Florian Klink <flokli@flokli.de>
Reviewed-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Link: https://lore.kernel.org/r/20250506142621.11428-2-flokli@flokli.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Pull hardening updates from Kees Cook:
- Update overflow helpers to ease refactoring of on-stack flex array
instances (Gustavo A. R. Silva, Kees Cook)
- lkdtm: Use SLAB_NO_MERGE instead of constructors (Harry Yoo)
- Simplify CONFIG_CC_HAS_COUNTED_BY (Jan Hendrik Farr)
- Disable u64 usercopy KUnit test on 32-bit SPARC (Thomas Weißschuh)
- Add missed designated initializers now exposed by fixed randstruct
(Nathan Chancellor, Kees Cook)
- Document compilers versions for __builtin_dynamic_object_size
- Remove ARM_SSP_PER_TASK GCC plugin
- Fix GCC plugin randstruct, add selftests, and restore COMPILE_TEST
builds
- Kbuild: induce full rebuilds when dependencies change with GCC
plugins, the Clang sanitizer .scl file, or the randstruct seed.
- Kbuild: Switch from -Wvla to -Wvla-larger-than=1
- Correct several __nonstring uses for -Wunterminated-string-initialization
* tag 'hardening-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (23 commits)
Revert "hardening: Disable GCC randstruct for COMPILE_TEST"
lib/tests: randstruct: Add deep function pointer layout test
lib/tests: Add randstruct KUnit test
randstruct: gcc-plugin: Remove bogus void member
net: qede: Initialize qede_ll_ops with designated initializer
scsi: qedf: Use designated initializer for struct qed_fcoe_cb_ops
md/bcache: Mark __nonstring look-up table
integer-wrap: Force full rebuild when .scl file changes
randstruct: Force full rebuild when seed changes
gcc-plugins: Force full rebuild when plugins change
kbuild: Switch from -Wvla to -Wvla-larger-than=1
hardening: simplify CONFIG_CC_HAS_COUNTED_BY
overflow: Fix direct struct member initialization in _DEFINE_FLEX()
kunit/overflow: Add tests for STACK_FLEX_ARRAY_SIZE() helper
overflow: Add STACK_FLEX_ARRAY_SIZE() helper
input/joystick: magellan: Mark __nonstring look-up table const
watchdog: exar: Shorten identity name to fit correctly
mod_devicetable: Enlarge the maximum platform_device_id name length
overflow: Clarify expectations for getting DEFINE_FLEX variable sizes
compiler_types: Identify compiler versions for __builtin_dynamic_object_size
...
The S32 platform has several Watchdog Timer available and tied with a
CPU. The SWT0 is the only one which directly asserts the reset line,
other SWT require an external setup to configure the reset behavior
which is not part of this change.
As a side note, in the NXP documentation, the s32g2 and s32g3
reference manuals refer the watchdog as the 'Software Timer Watchdog'
where the name can be misleading as it is actually a hardware
watchdog.
The maximum watchdog timeout value depends on the clock feeding the
SWT counter which is 32bits wide. On the s32g274-rb2, the clock has a
rate of 51MHz which result on 83 seconds maximum timeout.
The timeout can be specified via the device tree with the usual
existing bindings 'timeout-sec' or via the module param timeout.
The watchdog can be loaded with the 'nowayout' option, preventing the
watchdog to be stopped.
The watchdog can be started at boot time with the 'early-enable'
option, thus letting the watchdog framework to service the watchdog
counter.
The watchdog support the magic character to stop when the userspace
releases the device.
Cc: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Cc: Thomas Fossati <thomas.fossati@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Alexandru-Catalin Ionita <alexandru-catalin.ionita@nxp.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250410082616.1855860-3-daniel.lezcano@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the `DEFINE_RAW_FLEX()` helper for on-stack definitions of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
So, with these changes, fix the following warning:
drivers/watchdog/cros_ec_wdt.c:29:40: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/Z-WG6_uhWsy_FCq3@kspp
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The static initializer for struct watchdog_info::identity is too long
and gets initialized without a trailing NUL byte. Since the length
of "identity" is part of UAPI and tied to ioctls, just shorten
the name of the device. Avoids the warning seen with GCC 15's
-Wunterminated-string-initialization option:
drivers/watchdog/exar_wdt.c:224:27: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
224 | .identity = "Exar/MaxLinear XR28V38x Watchdog",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 81126222bd ("watchdog: Exar/MaxLinear XR28V38x driver")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250415225246.work.458-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
The s390 specific diag288_wdt watchdog driver makes use of the virtual
watchdog timer, which is available in most machine configurations.
If executing the diagnose instruction with subcode 0x288 results in an
exception the watchdog timer is not available, otherwise it is available.
In order to allow module autoload of the diag288_wdt module, move the
detection of the virtual watchdog timer to early boot code, and provide
its availability as a cpu feature.
This allows to make use of module_cpu_feature_match() to automatically load
the module iff the virtual watchdog timer is available.
Suggested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Tested-by: Mete Durlu <meted@linux.ibm.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250410095036.1525057-1-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull watchdog updates from Wim Van Sebroeck:
- Add watchdog driver for Lenovo SE30 platform
- Add support for Allwinner A523
- Add i.MX94 support
- watchdog framework: Convert to use device property
- renesas,wdt: Document RZ/G3E support
- Various other fixes and improvemenents
* tag 'linux-watchdog-6.15-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: sunxi_wdt: Add support for Allwinner A523
dt-bindings: watchdog: sunxi: add Allwinner A523 compatible string
watchdog: aspeed: fix 64-bit division
watchdog: npcm: Remove unnecessary NULL check before clk_prepare_enable/clk_disable_unprepare
dt-bindings: watchdog: renesas,wdt: Document RZ/G3E support
watchdog: Convert to use device property
watchdog: lenovo_se30_wdt: include io.h for devm_ioremap()
dt-bindings: watchdog: fsl-imx7ulp-wdt: Add i.MX94 support
watchdog: nic7018_wdt: tidy up ACPI ID table
watchdog: s3c2410_wdt: Fix PMU register bits for ExynosAutoV920 SoC
watchdog: lenovo_se30_wdt: Watchdog driver for Lenovo SE30 platform
watchdog: Enable RZV2HWDT driver depend on ARCH_RENESAS
watchdog: cros-ec: Add newlines to printks
watchdog: aspeed: Update bootstatus handling
Pull s390 updates from Vasily Gorbik:
- Add sorting of mcount locations at build time
- Rework uaccess functions with C exception handling to shorten inline
assembly size and enable full inlining. This yields near-optimal code
for small constant copies with a ~40kb kernel size increase
- Add support for a configurable STRICT_MM_TYPECHECKS which allows to
generate better code, but also allows to have type checking for debug
builds
- Optimize get_lowcore() for common callers with alternatives that
nearly revert to the pre-relocated lowcore code, while also slightly
reducing syscall entry and exit time
- Convert MACHINE_HAS_* checks for single facility tests into cpu_has_*
style macros that call test_facility(), and for features with
additional conditions, add a new ALT_TYPE_FEATURE alternative to
provide a static branch via alternative patching. Also, move machine
feature detection to the decompressor for early patching and add
debugging functionality to easily show which alternatives are patched
- Add exception table support to early boot / startup code to get rid
of the open coded exception handling
- Use asm_inline for all inline assemblies with EX_TABLE or ALTERNATIVE
to ensure correct inlining and unrolling decisions
- Remove 2k page table leftovers now that s390 has been switched to
always allocate 4k page tables
- Split kfence pool into 4k mappings in arch_kfence_init_pool() and
remove the architecture-specific kfence_split_mapping()
- Use READ_ONCE_NOCHECK() in regs_get_kernel_stack_nth() to silence
spurious KASAN warnings from opportunistic ftrace argument tracing
- Force __atomic_add_const() variants on s390 to always return void,
ensuring compile errors for improper usage
- Remove s390's ioremap_wt() and pgprot_writethrough() due to
mismatched semantics and lack of known users, relying on asm-generic
fallbacks
- Signal eventfd in vfio-ap to notify userspace when the guest AP
configuration changes, including during mdev removal
- Convert mdev_types from an array to a pointer in vfio-ccw and vfio-ap
drivers to avoid fake flex array confusion
- Cleanup trap code
- Remove references to the outdated linux390@de.ibm.com address
- Other various small fixes and improvements all over the code
* tag 's390-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (78 commits)
s390: Use inline qualifier for all EX_TABLE and ALTERNATIVE inline assemblies
s390/kfence: Split kfence pool into 4k mappings in arch_kfence_init_pool()
s390/ptrace: Avoid KASAN false positives in regs_get_kernel_stack_nth()
s390/boot: Ignore vmlinux.map
s390/sysctl: Remove "vm/allocate_pgste" sysctl
s390: Remove 2k vs 4k page table leftovers
s390/tlb: Use mm_has_pgste() instead of mm_alloc_pgste()
s390/lowcore: Use lghi instead llilh to clear register
s390/syscall: Merge __do_syscall() and do_syscall()
s390/spinlock: Implement SPINLOCK_LOCKVAL with inline assembly
s390/smp: Implement raw_smp_processor_id() with inline assembly
s390/current: Implement current with inline assembly
s390/lowcore: Use inline qualifier for get_lowcore() inline assembly
s390: Move s390 sysctls into their own file under arch/s390
s390/syscall: Simplify syscall_get_arguments()
s390/vfio-ap: Notify userspace that guest's AP config changed when mdev removed
s390: Remove ioremap_wt() and pgprot_writethrough()
s390/mm: Add configurable STRICT_MM_TYPECHECKS
s390/mm: Convert pgste_val() into function
s390/mm: Convert pgprot_val() into function
...
