Johan writes:
USB serial device ids for 6.18-rc3
Here are some new modem device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.18-rc3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Telit FN920C04 ECM compositions
USB: serial: option: add Quectel RG255C
USB: serial: option: add UNISOC UIS7720
When there is no port entry in the tcpci entry itself, the driver will
trigger an error message "OF: graph: no port node found in /...../typec" .
It is documented that the dts node should contain an connector entry
with ports and several port pointing to devices with usb-role-switch
property set. Only when those connector entry is missing, it should
check for port entries in the main node.
We switch the search order for looking after ports, which will avoid the
failure message while there are explicit connector entries.
Fixes: d56de8c9a1 ("usb: typec: tcpm: try to get role switch from tcpc fwnode")
Cc: stable <stable@kernel.org>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://patch.msgid.link/20251013-b4-ml-topic-tcpm-v2-1-63c9b2ab8a0b@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drop the check on the maximum transfer length in Raw Gadget for both
control and non-control transfers.
Limiting the transfer length causes a problem with emulating USB devices
whose full configuration descriptor exceeds PAGE_SIZE in length.
Overall, there does not appear to be any reason to enforce any kind of
transfer length limit on the Raw Gadget side for either control or
non-control transfers, so let's just drop the related check.
Cc: stable <stable@kernel.org>
Fixes: f2c2e71764 ("usb: gadget: add raw-gadget interface")
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://patch.msgid.link/a6024e8eab679043e9b8a5defdb41c4bda62f02b.1761085528.git.andreyknvl@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DbC is currently only enabled back if it's in configured state during
suspend.
If system is suspended after DbC is enabled, but before the device is
properly enumerated by the host, then DbC would not be enabled back in
resume.
Always enable DbC back in resume if it's suspended in enabled,
connected, or configured state
Cc: stable <stable@kernel.org>
Fixes: dfba2174dc ("usb: xhci: Add DbC support in xHCI driver")
Tested-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DbC may add 1024 bogus bytes to the beginneing of the receiving endpoint
if DbC hw triggers a STALL event before any Transfer Blocks (TRBs) for
incoming data are queued, but driver handles the event after it queued
the TRBs.
This is possible as xHCI DbC hardware may trigger spurious STALL transfer
events even if endpoint is empty. The STALL event contains a pointer
to the stalled TRB, and "remaining" untransferred data length.
As there are no TRBs queued yet the STALL event will just point to first
TRB position of the empty ring, with '0' bytes remaining untransferred.
DbC driver is polling for events, and may not handle the STALL event
before /dev/ttyDBC0 is opened and incoming data TRBs are queued.
The DbC event handler will now assume the first queued TRB (length 1024)
has stalled with '0' bytes remaining untransferred, and copies the data
This race situation can be practically mitigated by making sure the event
handler handles all pending transfer events when DbC reaches configured
state, and only then create dev/ttyDbC0, and start queueing transfers.
The event handler can this way detect the STALL events on empty rings
and discard them before any transfers are queued.
This does in practice solve the issue, but still leaves a small possible
gap for the race to trigger.
We still need a way to distinguish spurious STALLs on empty rings with '0'
bytes remaing, from actual STALL events with all bytes transmitted.
Cc: stable <stable@kernel.org>
Fixes: dfba2174dc ("usb: xhci: Add DbC support in xHCI driver")
Tested-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Intel USBIO driver is x86 only, other architectures have ACPI
so add an appropriate depenecy plus compile test.
Fixes: 121a0f839d ("usb: misc: Add Intel USBIO bridge driver")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
devm_clk_bulk_get_all_enabled() is used in the probe, so
clk_bulk_disable_unprepare() should not be called explicitly in the remove
function.
Fixes: e0b6dc00c7 ("usb: dwc3: add generic driver to support flattened")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and thunderbolt drivers for 6.18-rc1. It
was another normal development cycle, with lots of the usual drivers
getting updates:
- Thunderbolt driver cleanups and additions
- dwc3 driver updates
- dwc2 driver updates
- typec driver updates
- xhci driver updates and additions
- offload USB engine updates for better power management
- unused tracepoint removals
- usb gadget fixes and updates as more users start to rely on these
drivers instead of the "old" function gadget drivers
- new USB device ids
- other minor driver USB driver updates
- new USB I/O driver framework and driver additions"
The last item, the usb i/o driver, has an i2c and gpio driver added
through this tree. Those drivers were acked by the respective
subsystem maintainers.
All of these have been in linux-next for a while"
* tag 'usb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (132 commits)
usb: vhci-hcd: Prevent suspending virtually attached devices
USB: serial: option: add SIMCom 8230C compositions
thunderbolt: Fix use-after-free in tb_dp_dprx_work
usb: xhci: align PORTSC trace with one-based port numbering
usb: xhci: correct indentation for PORTSC tracing function
usb: xhci: improve TR Dequeue Pointer mask
usb: xhci-pci: add support for hosts with zero USB3 ports
usb: xhci: Update a comment about Stop Endpoint retries
Revert "usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running"
usb: gadget: f_rndis: Refactor bind path to use __free()
usb: gadget: f_ecm: Refactor bind path to use __free()
usb: gadget: f_acm: Refactor bind path to use __free()
usb: gadget: f_ncm: Refactor bind path to use __free()
usb: gadget: Introduce free_usb_request helper
usb: gadget: Store endpoint pointer in usb_request
usb: host: xhci-rcar: Add Renesas RZ/G3E USB3 Host driver support
usb: host: xhci-plat: Add .post_resume_quirk for struct xhci_plat_priv
usb: host: xhci-rcar: Move R-Car reg definitions
dt-bindings: usb: Document Renesas RZ/G3E USB3HOST
usb: gadget: f_fs: Fix epfile null pointer access after ep enable.
...
Pull media updates from Mauro Carvalho Chehab:
- Added a new V4L2 clock helper
- New camera sensor drivers
- iris: Enable H.264/H.265 encoder support and fixes in iris driver
common code
- camss: add support for new SoC flavors
- venus: add new SoC support
- tc358743: support more infoframe types
- Various fixes, driver improvements and cleanups
* tag 'media/v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (439 commits)
media: venus: pm_helpers: add fallback for the opp-table
media: qcom: camss: vfe: Fix BPL alignment for QCM2290
media: tuner: xc5000: Fix use-after-free in xc5000_release
media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe
media: b2c2: Fix use-after-free causing by irq_check_work in flexcop_pci_remove
media: vsp1: Export missing vsp1_isp_free_buffer symbol
media: renesas: vsp1: Convert to SYSTEM_SLEEP/RUNTIME_PM_OPS()
media: renesas: ceu: Convert to RUNTIME_PM_OPS()
media: renesas: fdp1: Convert to RUNTIME_PM_OPS()
media: renesas: rcar-vin: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
media: renesas: rcar_drif: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
media: uvcvideo: Mark invalid entities with id UVC_INVALID_ENTITY_ID
media: uvcvideo: Support UVC_CROSXU_CONTROL_IQ_PROFILE
media: uvcvideo: Run uvc_ctrl_init_ctrl for all controls
media: uvcvideo: Shorten the transfer size non compliance message
media: uvcvideo: Do not re-reference dev->udev
media: uvcvideo: Use intf instead of udev for printks
media: uvcvideo: Move video_device under video_queue
media: uvcvideo: Drop stream->mutex
media: uvcvideo: Move MSXU_CONTROL_METADATA definition to header
...
Pull misc vfs updates from Christian Brauner:
"This contains the usual selections of misc updates for this cycle.
Features:
- Add "initramfs_options" parameter to set initramfs mount options.
This allows to add specific mount options to the rootfs to e.g.,
limit the memory size
- Add RWF_NOSIGNAL flag for pwritev2()
Add RWF_NOSIGNAL flag for pwritev2. This flag prevents the SIGPIPE
signal from being raised when writing on disconnected pipes or
sockets. The flag is handled directly by the pipe filesystem and
converted to the existing MSG_NOSIGNAL flag for sockets
- Allow to pass pid namespace as procfs mount option
Ever since the introduction of pid namespaces, procfs has had very
implicit behaviour surrounding them (the pidns used by a procfs
mount is auto-selected based on the mounting process's active
pidns, and the pidns itself is basically hidden once the mount has
been constructed)
This implicit behaviour has historically meant that userspace was
required to do some special dances in order to configure the pidns
of a procfs mount as desired. Examples include:
* In order to bypass the mnt_too_revealing() check, Kubernetes
creates a procfs mount from an empty pidns so that user
namespaced containers can be nested (without this, the nested
containers would fail to mount procfs)
But this requires forking off a helper process because you cannot
just one-shot this using mount(2)
* Container runtimes in general need to fork into a container
before configuring its mounts, which can lead to security issues
in the case of shared-pidns containers (a privileged process in
the pidns can interact with your container runtime process)
While SUID_DUMP_DISABLE and user namespaces make this less of an
issue, the strict need for this due to a minor uAPI wart is kind
of unfortunate
Things would be much easier if there was a way for userspace to
just specify the pidns they want. So this pull request contains
changes to implement a new "pidns" argument which can be set
using fsconfig(2):
fsconfig(procfd, FSCONFIG_SET_FD, "pidns", NULL, nsfd);
fsconfig(procfd, FSCONFIG_SET_STRING, "pidns", "/proc/self/ns/pid", 0);
or classic mount(2) / mount(8):
// mount -t proc -o pidns=/proc/self/ns/pid proc /tmp/proc
mount("proc", "/tmp/proc", "proc", MS_..., "pidns=/proc/self/ns/pid");
Cleanups:
- Remove the last references to EXPORT_OP_ASYNC_LOCK
- Make file_remove_privs_flags() static
- Remove redundant __GFP_NOWARN when GFP_NOWAIT is used
- Use try_cmpxchg() in start_dir_add()
- Use try_cmpxchg() in sb_init_done_wq()
- Replace offsetof() with struct_size() in ioctl_file_dedupe_range()
- Remove vfs_ioctl() export
- Replace rwlock() with spinlock in epoll code as rwlock causes
priority inversion on preempt rt kernels
- Make ns_entries in fs/proc/namespaces const
- Use a switch() statement() in init_special_inode() just like we do
in may_open()
- Use struct_size() in dir_add() in the initramfs code
- Use str_plural() in rd_load_image()
- Replace strcpy() with strscpy() in find_link()
- Rename generic_delete_inode() to inode_just_drop() and
generic_drop_inode() to inode_generic_drop()
- Remove unused arguments from fcntl_{g,s}et_rw_hint()
Fixes:
- Document @name parameter for name_contains_dotdot() helper
- Fix spelling mistake
- Always return zero from replace_fd() instead of the file descriptor
number
- Limit the size for copy_file_range() in compat mode to prevent a
signed overflow
- Fix debugfs mount options not being applied
- Verify the inode mode when loading it from disk in minixfs
- Verify the inode mode when loading it from disk in cramfs
- Don't trigger automounts with RESOLVE_NO_XDEV
If openat2() was called with RESOLVE_NO_XDEV it didn't traverse
through automounts, but could still trigger them
- Add FL_RECLAIM flag to show_fl_flags() macro so it appears in
tracepoints
- Fix unused variable warning in rd_load_image() on s390
- Make INITRAMFS_PRESERVE_MTIME depend on BLK_DEV_INITRD
- Use ns_capable_noaudit() when determining net sysctl permissions
- Don't call path_put() under namespace semaphore in listmount() and
statmount()"
* tag 'vfs-6.18-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (38 commits)
fcntl: trim arguments
listmount: don't call path_put() under namespace semaphore
statmount: don't call path_put() under namespace semaphore
pid: use ns_capable_noaudit() when determining net sysctl permissions
fs: rename generic_delete_inode() and generic_drop_inode()
init: INITRAMFS_PRESERVE_MTIME should depend on BLK_DEV_INITRD
initramfs: Replace strcpy() with strscpy() in find_link()
initrd: Use str_plural() in rd_load_image()
initramfs: Use struct_size() helper to improve dir_add()
initrd: Fix unused variable warning in rd_load_image() on s390
fs: use the switch statement in init_special_inode()
fs/proc/namespaces: make ns_entries const
filelock: add FL_RECLAIM to show_fl_flags() macro
eventpoll: Replace rwlock with spinlock
selftests/proc: add tests for new pidns APIs
procfs: add "pidns" mount option
pidns: move is-ancestor logic to helper
openat2: don't trigger automounts with RESOLVE_NO_XDEV
namei: move cross-device check to __traverse_mounts
namei: remove LOOKUP_NO_XDEV check from handle_mounts
...
The VHCI platform driver aims to forbid entering system suspend when at
least one of the virtual USB ports are bound to an active USB/IP
connection.
However, in some cases, the detection logic doesn't work reliably, i.e.
when all devices attached to the virtual root hub have been already
suspended, leading to a broken suspend state, with unrecoverable resume.
Ensure the virtually attached devices do not enter suspend by setting
the syscore PM flag. Note this is currently limited to the client side
only, since the server side doesn't implement system suspend prevention.
Fixes: 04679b3489 ("Staging: USB/IP: add client driver")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250902-vhci-hcd-suspend-fix-v3-1-864e4e833559@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan writes:
USB serial updates for 6.18-rc1
Here are the USB serial updates for 6.18-rc1 consisting of some new
modem device ids and a trivial cleanup.
Everything has been in linux-next with no reported issues.
* tag 'usb-serial-6.18-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add SIMCom 8230C compositions
USB: serial: oti6858: remove extranenous ; after comment
Address the naming and usage of the TR Dequeue Pointer mask in the xhci
driver. The Endpoint Context Field at offset 0x08 is defined as follows:
Bit 0 Dequeue Cycle State (DCS)
Bits 3:1 RsvdZ (Reserved and Zero)
Bits 63:4 TR Dequeue Pointer
When extracting the TR Dequeue Pointer for an Endpoint without Streams,
in xhci_handle_cmd_set_deq(), the inverted Dequeue Cycle State mask
(~EP_CTX_CYCLE_MASK) is used, inadvertently including the Reserved bits.
Although bits 3:1 are typically zero, using the incorrect mask could cause
issues.
The existing mask, named "SCTX_DEQ_MASK," is misleading because "SCTX"
implies exclusivity to Stream Contexts, whereas the TR Dequeue Pointer is
applicable to both Stream and non-Stream Contexts.
Rename the mask to "TR_DEQ_PTR_MASK", utilize GENMASK_ULL() macro and use
the mask when handling the TR Dequeue Pointer field.
Function xhci_get_hw_deq() returns the Endpoint Context Field 0x08, either
directly from the Endpoint context or a Stream.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250917210726.97100-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 28a76fcc4c.
No actual HW bugs are known where Endpoint Context shows Running state
but Stop Endpoint fails repeatedly with Context State Error and leaves
the endpoint state unchanged. Stop Endpoint retries on Running EPs have
been performed since early 2021 with no such issues reported so far.
Trying to handle this hypothetical case brings a more realistic danger:
if Stop Endpoint fails on an endpoint which hasn't yet started after a
doorbell ring and enough latency occurs before this completion event is
handled, the driver may time out and begin removing cancelled TDs from
a running endpoint, even though one more retry would stop it reliably.
Such high latency is rare but not impossible, and removing TDs from a
running endpoint can cause more damage than not giving back a cancelled
URB (which wasn't happening anyway). So err on the side of caution and
revert to the old policy of always retrying if the EP appears running.
[Remove stable tag as we are dealing with theoretical cases -Mathias]
Fixes: 28a76fcc4c ("usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running")
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250917210726.97100-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kuen-Han Tsai <khtsai@google.com> says:
This patch series refactors the error-handling paths in the bind()
function for f_ncm, f_acm, f_ecm, and f_rndis drivers.
The current, unified goto logic in these drivers is vulnerable to a null
pointer dereference. This is caused by the cleanup logic incorrectly
handling the stale usb_request pointer after a bind/unbind cycle. This
series fixes this issue by converting the drivers to use the modern
__free() scope-based cleanup mechanism.
Patches 1-2 are preparatory, adding the endpoint pointer to struct
usb_request and defining helpers for the __free() cleanup. The remaining
four patches use this new plumbing to refactor each driver.
Future work
-----------
1. Refactor usb_ep_free_request(), usb_ep_queue(), and usb_ep_dequeue()
functions as the ep parameter becomes redudant.
2. Convert the remaining gadget function drivers to use the new __free()
cleanup mechanism.
Link: https://lore.kernel.org/r/20250916-ready-v1-0-4997bf277548@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After an bind/unbind cycle, the acm->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
Call trace:
usb_ep_free_request+0x2c/0xec
gs_free_req+0x30/0x44
acm_bind+0x1b8/0x1f4
usb_add_function+0xcc/0x1f0
configfs_composite_bind+0x468/0x588
gadget_bind_driver+0x104/0x270
really_probe+0x190/0x374
__driver_probe_device+0xa0/0x12c
driver_probe_device+0x3c/0x218
__device_attach_driver+0x14c/0x188
bus_for_each_drv+0x10c/0x168
__device_attach+0xfc/0x198
device_initial_probe+0x14/0x24
bus_probe_device+0x94/0x11c
device_add+0x268/0x48c
usb_add_gadget+0x198/0x28c
dwc3_gadget_init+0x700/0x858
__dwc3_set_mode+0x3cc/0x664
process_scheduled_works+0x1d8/0x488
worker_thread+0x244/0x334
kthread+0x114/0x1bc
ret_from_fork+0x10/0x20
Fixes: 1f1ba11b64 ("usb gadget: issue notifications from ACM function")
Cc: stable@kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://lore.kernel.org/r/20250916-ready-v1-4-4997bf277548@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250916-ready-v1-4-4997bf277548@google.com
After an bind/unbind cycle, the ncm->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
Call trace:
usb_ep_free_request+0x2c/0xec
ncm_bind+0x39c/0x3dc
usb_add_function+0xcc/0x1f0
configfs_composite_bind+0x468/0x588
gadget_bind_driver+0x104/0x270
really_probe+0x190/0x374
__driver_probe_device+0xa0/0x12c
driver_probe_device+0x3c/0x218
__device_attach_driver+0x14c/0x188
bus_for_each_drv+0x10c/0x168
__device_attach+0xfc/0x198
device_initial_probe+0x14/0x24
bus_probe_device+0x94/0x11c
device_add+0x268/0x48c
usb_add_gadget+0x198/0x28c
dwc3_gadget_init+0x700/0x858
__dwc3_set_mode+0x3cc/0x664
process_scheduled_works+0x1d8/0x488
worker_thread+0x244/0x334
kthread+0x114/0x1bc
ret_from_fork+0x10/0x20
Fixes: 9f6ce4240a ("usb: gadget: f_ncm.c added")
Cc: stable@kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://lore.kernel.org/r/20250916-ready-v1-3-4997bf277548@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250916-ready-v1-3-4997bf277548@google.com
Gadget function drivers often have goto-based error handling in their
bind paths, which can be bug-prone. Refactoring these paths to use
__free() scope-based cleanup is desirable, but currently blocked.
The blocker is that usb_ep_free_request(ep, req) requires two
parameters, while the __free() mechanism can only pass a pointer to the
request itself.
Store an endpoint pointer in the struct usb_request. The pointer is
populated centrally in usb_ep_alloc_request() on every successful
allocation, making the request object self-contained.
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://lore.kernel.org/r/20250916-ready-v1-1-4997bf277548@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250916-ready-v1-1-4997bf277548@google.com
A race condition occurs when ffs_func_eps_enable() runs concurrently
with ffs_data_reset(). The ffs_data_clear() called in ffs_data_reset()
sets ffs->epfiles to NULL before resetting ffs->eps_count to 0, leading
to a NULL pointer dereference when accessing epfile->ep in
ffs_func_eps_enable() after successful usb_ep_enable().
The ffs->epfiles pointer is set to NULL in both ffs_data_clear() and
ffs_data_close() functions, and its modification is protected by the
spinlock ffs->eps_lock. And the whole ffs_func_eps_enable() function
is also protected by ffs->eps_lock.
Thus, add NULL pointer handling for ffs->epfiles in the
ffs_func_eps_enable() function to fix issues
Signed-off-by: Owen Gu <guhuinan@xiaomi.com>
Link: https://lore.kernel.org/r/20250915092907.17802-1-guhuinan@xiaomi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usbmon binary interface currently truncates captures of large
transfers from higher-speed USB devices. Because a single event capture
is limited to one-fifth of the total buffer size, the current maximum
size of a captured URB is around 240 KiB. This is insufficient when
capturing traffic from modern devices that use transfers of several
hundred kilobytes or more, as truncated URBs can make it impossible for
user-space USB analysis tools like Wireshark to properly defragment and
reassemble higher-level protocol packets in the captured data.
The root cause of this issue is the 1200 KiB BUFF_MAX limit, which has
not been changed since the binary interface was introduced in 2006.
To resolve this issue, this patch increases BUFF_MAX to 64 MiB. The
original comment for BUFF_MAX based the limit's calculation on a
saturated 480 Mbit/s bus. Applying the same logic to a modern USB 3.2
Gen 2×2 20 Gbit/s bus (~2500 MB/s over a 20ms window) indicates the
buffer should be at least 50 MB. The new limit of 64 MiB covers that,
plus a little extra for any overhead.
With this change, both users and developers should now be able to debug
and reverse engineer modern USB devices even when running unmodified
distro kernels.
Please note that this change does not affect the default buffer size. A
larger buffer is only allocated when a user explicitly requests it via
the MON_IOCT_RING_SIZE ioctl, so the change to the maximum buffer size
should not unduly increase memory usage for users that don't
deliberately request a larger buffer.
Link: https://lore.kernel.org/CAO3ALPzdUkmMr0YMrODLeDSLZqNCkWcAP8NumuPHLjNJ8wC1kQ@mail.gmail.com
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/CAO3ALPxU5RzcoueC454L=WZ1qGMfAcnxm+T+p+9D8O9mcrUbCQ@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow autosuspend to be used by xhci plat device. For Qualcomm SoCs,
when in host mode, it is intended that the controller goes to suspend
state to save power and wait for interrupts from connected peripheral
to wake it up. This is particularly used in cases where a HID or Audio
device is connected. In such scenarios, the usb controller can enter
auto suspend and resume action after getting interrupts from the
connected device.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250916120436.3617598-1-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ze Huang <huang.ze@linux.dev> says:
The USB 3.0 controller found in the SpacemiT K1 SoC[1] supports both
USB3.0 Host and USB2.0 Dual-Role Device (DRD).
This controller is compatible with DesignWare Core USB 3 (DWC3) driver.
However, constraints in the `snps,dwc3` bindings limit the ability to
describe hardware-specific features in a clean and maintainable way.
While `dwc3-of-simple` still serves as a glue layer for many platforms,
it requires a split device tree node structure, which is less desirable
in newer platforms.
To promote a transition toward a flattened `dwc` node structure, this
series introduces `dwc3-generic-plat`, building upon prior efforts that
exposed the DWC3 core driver [2].
The device tree support for SpacemiT K1 will be submitted separately
when the associated PHY driver is ready.
Link: https://developer.spacemit.com/documentation?token=AjHDwrW78igAAEkiHracBI9HnTb [1]
Link: https://lore.kernel.org/all/20250414-dwc3-refactor-v7-3-f015b358722d@oss.qualcomm.com [2]
Link: https://lore.kernel.org/r/20250913-dwc3_generic-v8-0-b50f81f05f95@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generic_delete_inode() is rather misleading for what the routine is
doing. inode_just_drop() should be much clearer.
The new naming is inconsistent with generic_drop_inode(), so rename that
one as well with inode_ as the suffix.
No functional changes.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
On Apple Silicon machines there is no control over which alt mode is
chosen. The CD321x' firmware negotiates the target mode on its own and
only lets the main CPU know after the mode has already been chosen.
Especially after plugging a new cable in this can result to quick mode
changes from e.g. power only -> USB3 only -> USB3+DisplayPort in a short
time. It is not possile to influence this in any way and we also do not
get direct access to the PDOs or VDOs exchanged via USB PD.
Additionally, mode changes must be tightly synchronized between DWC3 and
the Type C PHY and most mode changes require a full reset of DWC3 to
make the port work correctly.
This is all done synchronously from the role switch handler inside the
DWC3 glue driver on these machines to avoid tripping any failsafes or
watchdogs inside the Type-C PHY that may, in the worst case, reset the
entire SoC.
To be able to control all this we trigger the entire process in the
correct order directly from the TIPD driver and de-bounce any mode
changes to avoid tearing down and re-setting DWC3 back up multiple times
any time a new connection is made.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Co-developed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Sven Peter <sven@kernel.org>
Reviewed-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-11-4e99c8649024@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
