The blamed commit and others in that patch set started the trend
of reusing existing DSA driver API for a new purpose: calling
ds->ops->port_fdb_add() on the CPU port.
The lantiq_gswip driver was not prepared to handle that, as can be seen
from the many errors that Daniel presents in the logs:
[ 174.050000] gswip 1e108000.switch: port 2 failed to add fa:aa:72:f4:8b:1e vid 1 to fdb: -22
[ 174.060000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 174.070000] gswip 1e108000.switch: port 2 failed to add 00:01:02:03:04:02 vid 0 to fdb: -22
[ 174.090000] gswip 1e108000.switch: port 2 failed to add 00:01:02:03:04:02 vid 1 to fdb: -22
[ 174.090000] gswip 1e108000.switch: port 2 failed to delete fa:aa:72:f4:8b:1e vid 1 from fdb: -2
The errors are because gswip_port_fdb() wants to get a handle to the
bridge that originated these FDB events, to associate it with a FID.
Absolutely honourable purpose, however this only works for user ports.
To get the bridge that generated an FDB entry for the CPU port, one
would need to look at the db.bridge.dev argument. But this was
introduced in commit c26933639b ("net: dsa: request drivers to perform
FDB isolation"), first appeared in v5.18, and when the blamed commit was
introduced in v5.14, no such API existed.
So the core DSA feature was introduced way too soon for lantiq_gswip.
Not acting on these host FDB entries and suppressing any errors has no
other negative effect, and practically returns us to not supporting the
host filtering feature at all - peacefully, this time.
Fixes: 10fae4ac89 ("net: dsa: include bridge addresses which are local in the host fdb list")
Reported-by: Daniel Golle <daniel@makrotopia.org>
Closes: https://lore.kernel.org/netdev/aJfNMLNoi1VOsPrN@pidgin.makrotopia.org/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250918072142.894692-3-vladimir.oltean@nxp.com
Tested-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A port added to a "single port bridge" operates as standalone, and this
is mutually exclusive to being part of a Linux bridge. In fact,
gswip_port_bridge_join() calls gswip_add_single_port_br() with
add=false, i.e. removes the port from the "single port bridge" to enable
autonomous forwarding.
The blamed commit seems to have incorrectly thought that ds->ops->port_enable()
is called one time per port, during the setup phase of the switch.
However, it is actually called during the ndo_open() implementation of
DSA user ports, which is to say that this sequence of events:
1. ip link set swp0 down
2. ip link add br0 type bridge
3. ip link set swp0 master br0
4. ip link set swp0 up
would cause swp0 to join back the "single port bridge" which step 3 had
just removed it from.
The correct DSA hook for one-time actions per port at switch init time
is ds->ops->port_setup(). This is what seems to match the coder's
intention; also see the comment at the beginning of the file:
* At the initialization the driver allocates one bridge table entry for
~~~~~~~~~~~~~~~~~~~~~
* each switch port which is used when the port is used without an
* explicit bridge.
Fixes: 8206e0ce96 ("net: dsa: lantiq: Add VLAN unaware bridge offloading")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250918072142.894692-2-vladimir.oltean@nxp.com
Tested-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If we fail to attach a PHY, there is no point trying to configure WoL
settings. Exit the function after printing the "cannot attach to PHY"
error, and remove the now unnecessary code indentation for configuring
the LPI timer in phylink. Since we know that "ret" must be zero at this
point, change the final return to use a constant rather than "ret".
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1v11A8-0000000774M-3pmH@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the PHY attachment/detachment from the network driver out of
__stmmac_open() and __stmmac_release() into stmmac_open() and
stmmac_release() where these actions will only happen when the
interface is administratively brought up or down. It does not make
sense to detach and re-attach the PHY during a change of MTU.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1v11A3-0000000774G-3PKY@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The LIBIE_AQ_STR macro() introduced by commit 5feaa7a07b ("libie: add
adminq helper for converting err to str") is used in order to generate
strings for printing human readable error codes. Its definition is missing
the separating underscore ('_') character which makes the resulting strings
difficult to read. Additionally, the string won't match the source code,
preventing search tools from working properly.
Add the missing underscore character, fixing the error string names.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Fixes: 5feaa7a07b ("libie: add adminq helper for converting err to str")
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250923205657.846759-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement the XSk transmit path using the libeth (libeth_xdp)
XSk infra.
When the NAPI poll is called, XSk Tx queues are polled first,
before regular Tx and Rx. They're generally faster to serve
and have higher priority comparing to regular traffic.
Co-developed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Ramu R <ramu.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add functionality to setup an XSk buffer pool, including ability to
stop, reconfig and start only selected queues, not the whole device.
Pool DMA mapping is managed by libeth_xdp.
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Ramu R <ramu.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Implement VC functions dedicated to enabling, disabling and configuring
not all but only selected queues.
Also, refactor the existing implementation to make the code more
modular. Introduce new generic functions for sending VC messages
consisting of chunks, in order to isolate the sending algorithm
and its implementation for specific VC messages.
Finally, rewrite the function for mapping queues to q_vectors using the
new modular approach to avoid copying the code that implements the VC
message sending algorithm.
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Co-developed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Ramu R <ramu.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In an effort to give more human readable messages when errors occur
because of conflicting options, it can be useful to convert the CAN
control mode flags into text.
Add a function which converts the first set CAN control mode into a
human readable string. The reason to only convert the first one is to
simplify edge cases: imagine that there are several invalid control
modes, we would just return the first invalid one to the user, thus
not having to handle complex string concatenation. The user can then
solve the first problem, call the netlink interface again and see the
next issue.
People who wish to enumerate all the control modes can still do so by,
for example, using this new function in a for_each_set_bit() loop.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250923-canxl-netlink-prep-v4-19-e720d28f66fe@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
can_calc_tdco() uses the CAN_CTRLMODE_FD_TDC_MASK and
CAN_CTRLMODE_TDC_AUTO macros making it specific to CAN FD. Add the tdc
mask to the function parameter list. The value of the tdc auto flag
can then be derived from that mask and stored in a local variable.
This way, the function becomes CAN FD agnostic and can be reused later
on for the CAN XL TDC.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250923-canxl-netlink-prep-v4-18-e720d28f66fe@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
can_tdc_get_size() needs to access can_priv->fd making it specific to
CAN FD. Change the function parameter from struct can_priv to struct
data_bittiming_params.
can_tdc_get_size() also uses the CAN_CTRLMODE_TDC_MANUAL macro making
it specific to CAN FD. Add the tdc mask to the function parameter
list. The value of the tdc manual flag can then be derived from that
mask and stored in a local variable.
This way, the function becomes CAN FD agnostic and can be reused later
on for the CAN XL TDC.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250923-canxl-netlink-prep-v4-12-e720d28f66fe@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
can_tdc_changelink() return -EOPNOTSUPP under this condition:
!tdc_const || !can_fd_tdc_is_enabled(priv)
But this function is only called if the data[IFLA_CAN_TDC] parameters
are provided. At this point, can_validate_tdc() already checked that
either of the tdc auto or tdc manual control modes were provided, that
is to say, can_fd_tdc_is_enabled(priv) must be true.
Because the right hand operand of this condition is always true,
remove it.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250923-canxl-netlink-prep-v4-8-e720d28f66fe@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
CAN_CTRLMODE_TDC_AUTO and CAN_CTRLMODE_TDC_MANUAL are mutually
exclusive. This means that whenever the user switches from auto to
manual mode (or vice versa), the other flag which was set previously
needs to be cleared.
Currently, this is handled with a masking operation. It can be done in
a simpler manner by clearing any of the previous TDC flags before
copying netlink attributes. The code becomes easier to understand and
will make it easier to add the new upcoming CAN XL flags which will
have a similar reset logic as the current TDC flags.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250923-canxl-netlink-prep-v4-7-e720d28f66fe@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Factorise the databittiming validation out of can_validate() and move
it in the new add can_validate_databittiming() function. Also move
can_validate()'s comment because it is specific to CAN FD. This is a
preparation patch for the introduction of CAN XL as this databittiming
validation will be reused later on.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250923-canxl-netlink-prep-v4-6-e720d28f66fe@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Whenever can_validate_bittiming() is called, it is always preceded by
some boilerplate code which was copy pasted all over the place. Move
that repeated code directly inside can_validate_bittiming().
Finally, the mempcy() is not needed: the nla attributes are four bytes
aligned which is just enough for struct can_bittiming. Add a
static_assert() to document that the alignment is correct and just use
the pointer returned by nla_data() as-is.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250923-canxl-netlink-prep-v4-4-e720d28f66fe@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In commit 97edec3a11 ("can: enable CAN FD for virtual CAN devices by
default"), vcan and vxcan default MTU was set to CANFD_MTU by default.
The reason was that users were confused on how to activate CAN FD on
virtual interfaces.
Following the introduction of CAN XL, the same logic should be
applied. Set the MTU to CANXL_MTU by default.
The users who really wish to use a Classical CAN only or a CAN FD
virtual device can do respectively:
$ ip link set vcan0 mtu 16
or
$ ip link set vcan0 mtu 72
to force the old behaviour.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250923-can-fix-mtu-v3-4-581bde113f52@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
By populating:
net_device->min_mtu
and
net_device->max_mtu
the net core infrastructure will automatically:
1. validate that the user's inputs are in range.
2. report those min and max MTU values through the netlink
interface.
Add can_set_default_mtu() which sets the default mtu value as well as
the minimum and maximum values. The logic for the default mtu value
remains unchanged:
- CANFD_MTU if the device has a static CAN_CTRLMODE_FD.
- CAN_MTU otherwise.
Call can_set_default_mtu() each time the CAN_CTRLMODE_FD is modified.
This will guarantee that the MTU value is always consistent with the
control mode flags.
With this, the checks done in can_change_mtu() become fully redundant
and will be removed in an upcoming change and it is now possible to
confirm the minimum and maximum MTU values on a physical CAN interface
by doing:
$ ip --details link show can0
The virtual interfaces (vcan and vxcan) are not impacted by this
change.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250923-can-fix-mtu-v3-3-581bde113f52@kernel.org
[mkl: squashed https://patch.msgid.link/20250924143644.17622-2-mailhol@kernel.org]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() uses
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
Explicitly add the WQ_UNBOUND flag to alloc_workqueue() users, marking
the workqueue unbound.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20250923145905.327269-2-marco.crivellari@suse.com
[use imperative voice in subject, fix typos]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This reverts commit 1e06a13751 ("wifi: libertas: WQ_PERCPU added
to alloc_workqueue users") since there's really no reason to use
per-CPU here.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When HWS creates multi-dest FW table and adds rules to
forward to other tables, ignore the flow level enforcement
in FW, because HWS is responsible for table levels.
This fixes the following error:
mlx5_core 0000:08:00.0: mlx5_cmd_out_err:818:(pid 192306):
SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed,
status bad parameter(0x3), syndrome (0x6ae84c), err(-22)
Fixes: 504e536d90 ("net/mlx5: HWS, added actions handling")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1758525094-816583-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix a kernel trace [1] caused by releasing an HWS action of a local flow
counter in mlx5_cmd_hws_delete_fte(), where the HWS action refcount and
mutex were not initialized and the counter struct could already be freed
when deleting the rule.
Fix it by adding the missing initializations and adding refcount for the
local flow counter struct.
[1] Kernel log:
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x48
mlx5_fs_put_hws_action.part.0.cold+0x21/0x94 [mlx5_core]
mlx5_fc_put_hws_action+0x96/0xad [mlx5_core]
mlx5_fs_destroy_fs_actions+0x8b/0x152 [mlx5_core]
mlx5_cmd_hws_delete_fte+0x5a/0xa0 [mlx5_core]
del_hw_fte+0x1ce/0x260 [mlx5_core]
mlx5_del_flow_rules+0x12d/0x240 [mlx5_core]
? ttwu_queue_wakelist+0xf4/0x110
mlx5_ib_destroy_flow+0x103/0x1b0 [mlx5_ib]
uverbs_free_flow+0x20/0x50 [ib_uverbs]
destroy_hw_idr_uobject+0x1b/0x50 [ib_uverbs]
uverbs_destroy_uobject+0x34/0x1a0 [ib_uverbs]
uobj_destroy+0x3c/0x80 [ib_uverbs]
ib_uverbs_run_method+0x23e/0x360 [ib_uverbs]
? uverbs_finalize_object+0x60/0x60 [ib_uverbs]
ib_uverbs_cmd_verbs+0x14f/0x2c0 [ib_uverbs]
? do_tty_write+0x1a9/0x270
? file_tty_write.constprop.0+0x98/0xc0
? new_sync_write+0xfc/0x190
ib_uverbs_ioctl+0xd7/0x160 [ib_uverbs]
__x64_sys_ioctl+0x87/0xc0
do_syscall_64+0x59/0x90
Fixes: b581f42669 ("net/mlx5: fs, manage flow counters HWS action sharing by refcount")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1758525094-816583-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Once the last user of a clock has been removed, the clock should be
removed. So far orphaned clocks are cleaned up in dp83640_free_clocks()
only. Add the logic to remove orphaned clocks in dp83640_remove().
This allows to simplify the code, and use standard macro
module_phy_driver(). dp83640 was the last external user of
phy_driver_register(), so we can stop exporting this function afterwards.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/6d4e80e7-c684-4d95-abbd-ea62b79a9a8a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Move the conflicting declaration to the end of the corresponding
structure. Notice that `struct airoha_foe_entry` is a flexible
structure, this is a structure that contains a flexible-array
member.
Fix the following warning:
drivers/net/ethernet/airoha/airoha_eth.h:474:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/aNFYVYLXQDqm4yxb@kspp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marc Kleine-Budde says:
====================
pull-request: can 2025-09-23
The 1st patch is by Chen Yufeng and fixes a potential NULL pointer
deref in the hi311x driver.
Duy Nguyen contributes a patch for the rcar_canfd driver to fix the
controller mode setting.
The next 4 patches are by Vincent Mailhol and populate the
ndo_change_mtu(( callback in the etas_es58x, hi311x, sun4i_can and
mcba_usb driver to prevent buffer overflows.
Stéphane Grosjean's patch for the peak_usb driver fixes a
shift-out-of-bounds issue.
* tag 'linux-can-fixes-for-6.17-20250923' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: peak_usb: fix shift-out-of-bounds issue
can: mcba_usb: populate ndo_change_mtu() to prevent buffer overflow
can: sun4i_can: populate ndo_change_mtu() to prevent buffer overflow
can: hi311x: populate ndo_change_mtu() to prevent buffer overflow
can: etas_es58x: populate ndo_change_mtu() to prevent buffer overflow
can: rcar_canfd: Fix controller mode setting
can: hi311x: fix null pointer dereference when resuming from sleep before interface was enabled
====================
Link: https://patch.msgid.link/20250923073427.493034-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
can_set_static_ctrlmode() is declared as a static inline. But it is
only called in the probe function of the devices and so does not
really benefit from any kind of optimization.
Transform it into a "normal" function by moving it to
drivers/net/can/dev/dev.c
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250923-can-fix-mtu-v3-2-581bde113f52@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This change add a new WQ_PERCPU flag, to explicitly request the use of
the per-CPU behavior. Both flags coexist for one release cycle to allow
callers to transition their calls.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
All existing users have been updated accordingly.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20250922102407.186660-2-marco.crivellari@suse.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Jeff Johnson says:
==================
ath.git patches for v6.18
Highlights for some specific drivers include:
ath10k:
Fix connection after GTK rekeying
ath12k:
Fix Issues in REO RX Queue Updates
Handle inactivity STA kickout event
And of course there is the usual set of cleanups and bug fixes across
the entire family of "ath" drivers.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In bnxt_tc_parse_pedit(), the code incorrectly writes IPv6
destination values to the source address field (saddr) when
processing pedit offsets within the destination address range.
This patch corrects the assignment to use daddr instead of saddr,
ensuring that pedit operations on IPv6 destination addresses are
applied correctly.
Fixes: 9b9eb518e3 ("bnxt_en: Add support for NAT(L3/L4 rewrite)")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Link: https://patch.msgid.link/20250920121157.351921-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
