Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- FC target fixes (Daniel)
- Authentication fixes and updates (Martin, Chris)
- Admin controller handling (Kamaljit)
- Target lockdep assertions (Max)
- Keep-alive updates for discovery (Alastair)
- Suspend quirk (Georg)
- MD pull request via Yu:
- Add support for a lockless bitmap.
A key feature for the new bitmap are that the IO fastpath is
lockless. If a user issues lots of write IO to the same bitmap
bit in a short time, only the first write has additional overhead
to update bitmap bit, no additional overhead for the following
writes.
By supporting only resync or recover written data, means in the
case creating new array or replacing with a new disk, there is no
need to do a full disk resync/recovery.
- Switch ->getgeo() and ->bios_param() to using struct gendisk rather
than struct block_device.
- Rust block changes via Andreas. This series adds configuration via
configfs and remote completion to the rnull driver. The series also
includes a set of changes to the rust block device driver API: a few
cleanup patches, and a few features supporting the rnull changes.
The series removes the raw buffer formatting logic from
`kernel::block` and improves the logic available in `kernel::string`
to support the same use as the removed logic.
- floppy arch cleanups
- Reduce the number of dereferencing needed for ublk commands
- Restrict supported sockets for nbd. Mostly done to eliminate a class
of issues perpetually reported by syzbot, by using nonsensical socket
setups.
- A few s390 dasd block fixes
- Fix a few issues around atomic writes
- Improve DMA interation for integrity requests
- Improve how iovecs are treated with regards to O_DIRECT aligment
constraints.
We used to require each segment to adhere to the constraints, now
only the request as a whole needs to.
- Clean up and improve p2p support, enabling use of p2p for metadata
payloads
- Improve locking of request lookup, using SRCU where appropriate
- Use page references properly for brd, avoiding very long RCU sections
- Fix ordering of recursively submitted IOs
- Clean up and improve updating nr_requests for a live device
- Various fixes and cleanups
* tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (164 commits)
s390/dasd: enforce dma_alignment to ensure proper buffer validation
s390/dasd: Return BLK_STS_INVAL for EINVAL from do_dasd_request
ublk: remove redundant zone op check in ublk_setup_iod()
nvme: Use non zero KATO for persistent discovery connections
nvmet: add safety check for subsys lock
nvme-core: use nvme_is_io_ctrl() for I/O controller check
nvme-core: do ioccsz/iorcsz validation only for I/O controllers
nvme-core: add method to check for an I/O controller
blk-cgroup: fix possible deadlock while configuring policy
blk-mq: fix null-ptr-deref in blk_mq_free_tags() from error path
blk-mq: Fix more tag iteration function documentation
selftests: ublk: fix behavior when fio is not installed
ublk: don't access ublk_queue in ublk_unmap_io()
ublk: pass ublk_io to __ublk_complete_rq()
ublk: don't access ublk_queue in ublk_need_complete_req()
ublk: don't access ublk_queue in ublk_check_commit_and_fetch()
ublk: don't pass ublk_queue to ublk_fetch()
ublk: don't access ublk_queue in ublk_config_io_buf()
ublk: don't access ublk_queue in ublk_check_fetch_buf()
ublk: pass q_id and tag to __ublk_check_and_get_req()
...
Rename the inner 'frm' variable to 'resp_frm' in the write path of
mmc_route_rpmb_frames() to avoid shadowing the outer 'frm' variable.
The function declares 'frm' at function scope pointing to the request
frame, but then redeclares another 'frm' variable inside the write
block pointing to the response frame. This shadowing makes the code
confusing and error-prone.
Using 'resp_frm' for the response frame makes the distinction clear
and improves code readability.
Fixes: 7852028a35 ("mmc: block: register RPMB partition with the RPMB subsystem")
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Introduce a new device tree flag to cap the maximum High-Speed (HS)
mode frequency for SD cards, accommodating board-specific
electrical limitations which cannot support the default 50Mhz HS
frequency and others.
Signed-off-by: Sarthak Garg <quic_sartgarg@quicinc.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Starting with commit f99508074e ("PM: domains: Detach on
device_unbind_cleanup()"), there is no longer a need to call
dev_pm_domain_detach() in the bus remove function. The
device_unbind_cleanup() function now handles this to avoid
invoking devres cleanup handlers while the PM domain is
powered off, which could otherwise lead to failures as
described in the above-mentioned commit.
Drop the explicit dev_pm_domain_detach() call and rely instead
on the flags passed to dev_pm_domain_attach() to power off the
domain.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250827101236.927313-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add infrastructure to handle regulator undervoltage events for MMC/eMMC
cards. When an undervoltage is detected, the new handler performs a
controlled emergency suspend using a short power-off notification,
skipping the cache flush to maximize the chance of a safe shutdown.
After the operation, the card is marked as removed to prevent further
I/O and possible data corruption.
This is implemented by introducing MMC_POWEROFF_UNDERVOLTAGE to the
mmc_poweroff_type enum and refactoring the suspend logic into an
internal __mmc_suspend() helper that allows the caller to skip the cache
flush if required. The undervoltage handler is registered as a bus
operation and invoked from the core undervoltage path.
If power-off notification is not supported by the card, the handler
falls back to sleep or deselecting the card.
Additionally, update the shutdown path to avoid redundant shutdown
steps if the card is already removed
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20250821130751.2089587-3-o.rempel@pengutronix.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Implement the core infrastructure to allow MMC bus types to handle
REGULATOR_EVENT_UNDER_VOLTAGE events from power regulators. This is
primarily aimed at allowing devices like eMMC to perform an emergency
shutdown to prevent data corruption when a power failure is imminent.
This patch introduces:
- A new 'handle_undervoltage' function pointer to 'struct mmc_bus_ops'.
Bus drivers (e.g., for eMMC) can implement this to define their
emergency procedures.
- A workqueue ('uv_work') in 'struct mmc_supply' to handle the event
asynchronously in a high-priority context.
- A new function 'mmc_handle_undervoltage()' which is called from the
workqueue. It stops the host queue to prevent races with card removal,
checks for the bus op, and invokes the handler.
- Functions to register and unregister the regulator notifier, intended
to be called by bus drivers like 'mmc_attach_mmc' when a compatible
card is detected.
The notifier is only registered for the main vmmc supply, as
undervoltage handling for vqmmc or vqmmc2 is not required at this
time.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20250821130751.2089587-2-o.rempel@pengutronix.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Instances are happier that way and it makes more sense anyway -
the only part of the result that is related to partition we are given
is the start sector, and that has been filled in by the caller.
Everything else is a function of the disk. Only one instance
(DASD) is ever looking at anything other than bdev->bd_disk and
that one is trivial to adjust.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Merge miscellaneous power management updates and cpupower utility
updates for 6.17-rc1:
- Update contact information in the PM ABI docs and maintainer
information in the power domains DT binding (Rafael Wysocki)
- Update PM header inclusions to follow the IWYU (Include What You Use)
principle (Andy Shevchenko)
- Add flags to specify power on attach/detach for PM domains, make the
driver core detach PM domains in device_unbind_cleanup(), and drop
the dev_pm_domain_detach() call from the platform bus type (Claudiu
Beznea)
- Improve Python binding's Makefile for cpupower (John B. Wyatt IV)
- Fix printing of CORE, CPU fields in cpupower-monitor (Gautham Shenoy)
* pm-misc:
PM: docs: Use my kernel.org address in ABI docs and DT bindings
driver core: platform: Drop dev_pm_domain_detach() call
PM: domains: Detach on device_unbind_cleanup()
PM: domains: Add flags to specify power on attach/detach
PM: Don't use "proxy" headers
* pm-tools:
cpupower: Improve Python binding's Makefile
pm: cpupower: Fix printing of CORE, CPU fields in cpupower-monitor
pm: cpupower: Fix the snapshot-order of tsc,mperf, clock in mperf_stop()
Calling dev_pm_domain_attach()/dev_pm_domain_detach() in bus driver
probe/remove functions can affect system behavior when the drivers
attached to the bus use devres-managed resources. Since devres actions
may need to access device registers, calling dev_pm_domain_detach() too
early, i.e., before these actions complete, can cause failures on some
systems. One such example is Renesas RZ/G3S SoC-based platforms.
If the device clocks are managed via PM domains, invoking
dev_pm_domain_detach() in the bus driver's remove function removes the
device's clocks from the PM domain, preventing any subsequent
pm_runtime_resume*() calls from enabling those clocks.
The second argument of dev_pm_domain_attach() specifies whether the PM
domain should be powered on during attachment. Likewise, the second
argument of dev_pm_domain_detach() indicates whether the domain should be
powered off during detachment.
Upcoming changes address the issue described above (initially for the
platform bus only) by deferring the call to dev_pm_domain_detach() until
after devres_release_all() in device_unbind_cleanup(). The detach_power_off
field in struct dev_pm_info stores the detach power off info from the
second argument of dev_pm_domain_attach().
Because there are cases where the device's PM domain power-on/off behavior
must be conditional (e.g., in i2c_device_probe()), the patch introduces
PD_FLAG_ATTACH_POWER_ON and PD_FLAG_DETACH_POWER_OFF flags to be passed
to dev_pm_domain_attach().
Finally, dev_pm_domain_attach() and its users are updated to use the newly
introduced PD_FLAG_ATTACH_POWER_ON and PD_FLAG_DETACH_POWER_OFF macros.
This change is preparatory.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # I2C
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/20250703112708.1621607-2-claudiu.beznea.uj@bp.renesas.com
[ rjw: Changelog adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It appears that some vendors provision the boot areas with valid part
tables (GPT) in order to have identifiable partitions for device and
firmware specific data, such has the qualcomm CDT (Qualcomm Config
Data Table). Additionally, these boot areas can be utilized to host
device-specific IDs, calibration data, and other critical information.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250507134538.575912-1-loic.poulain@oss.qualcomm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
An mmc host driver may allow to unbind from its corresponding host device.
If an eMMC card is attached to the host, the mmc core will just try to cut
the power for it, without obeying to the eMMC spec.
Potentially this may damage the card and it may also prevent us from
successfully doing a re-initialization of it, which would typically happen
if/when we try to re-bind the mmc host driver.
To fix these problems, let's implement a graceful power-down of the card at
host removal.
Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250407152759.25160-5-ulf.hansson@linaro.org
To manage a graceful power-off of the eMMC card during platform shutdown,
the prioritized option is to use the poweroff-notification command, if the
eMMC card supports it.
During a suspend request we may decide to fall back to use the sleep
command, instead of the poweroff-notification, unless the mmc host supports
a complete power-cycle of the eMMC. For this reason, we may need to restore
power and re-initialize the card, if it remains suspended when a shutdown
request is received.
However, the current condition to restore power and re-initialize the card
doesn't take into account MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND properly. This
may lead to doing a re-initialization when it really isn't needed, as the
eMMC may already have been powered-off using the poweroff-notification
command. Let's fix the condition to avoid this.
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250407152759.25160-3-ulf.hansson@linaro.org
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull block updates from Jens Axboe:
- Fixes for integrity handling
- NVMe pull request via Keith:
- Secure concatenation for TCP transport (Hannes)
- Multipath sysfs visibility (Nilay)
- Various cleanups (Qasim, Baruch, Wang, Chen, Mike, Damien, Li)
- Correct use of 64-bit BARs for pci-epf target (Niklas)
- Socket fix for selinux when used in containers (Peijie)
- MD pull request via Yu:
- fix recovery can preempt resync (Li Nan)
- fix md-bitmap IO limit (Su Yue)
- fix raid10 discard with REQ_NOWAIT (Xiao Ni)
- fix raid1 memory leak (Zheng Qixing)
- fix mddev uaf (Yu Kuai)
- fix raid1,raid10 IO flags (Yu Kuai)
- some refactor and cleanup (Yu Kuai)
- Series cleaning up and fixing bugs in the bad block handling code
- Improve support for write failure simulation in null_blk
- Various lock ordering fixes
- Fixes for locking for debugfs attributes
- Various ublk related fixes and improvements
- Cleanups for blk-rq-qos wait handling
- blk-throttle fixes
- Fixes for loop dio and sync handling
- Fixes and cleanups for the auto-PI code
- Block side support for hardware encryption keys in blk-crypto
- Various cleanups and fixes
* tag 'for-6.15/block-20250322' of git://git.kernel.dk/linux: (105 commits)
nvmet: replace max(a, min(b, c)) by clamp(val, lo, hi)
nvme-tcp: fix selinux denied when calling sock_sendmsg
nvmet: pci-epf: Always configure BAR0 as 64-bit
nvmet: Remove duplicate uuid_copy
nvme: zns: Simplify nvme_zone_parse_entry()
nvmet: pci-epf: Remove redundant 'flush_workqueue()' calls
nvmet-fc: Remove unused functions
nvme-pci: remove stale comment
nvme-fc: Utilise min3() to simplify queue count calculation
nvme-multipath: Add visibility for queue-depth io-policy
nvme-multipath: Add visibility for numa io-policy
nvme-multipath: Add visibility for round-robin io-policy
nvmet: add tls_concat and tls_key debugfs entries
nvmet-tcp: support secure channel concatenation
nvmet: Add 'sq' argument to alloc_ctrl_args
nvme-fabrics: reset admin connection for secure concatenation
nvme-tcp: request secure channel concatenation
nvme-keyring: add nvme_tls_psk_refresh()
nvme: add nvme_auth_derive_tls_psk()
nvme: add nvme_auth_generate_digest()
...
Pull MMC updates from Ulf Hansson:
"MMC host:
- atmel-mci: Convert DT bindings to json schema
- dw_mmc: Add support for the Exynos7870 variant
- dw_mmc-rockchip: Add support for the RK3562/3528 variants
- omap: Fix potential memory leak in the probe error path
- renesas_sdhi: Add support for RZ/G3E variants
- sdhci: Disable SD card clock before changing parameters
- sdhci-esdhc-imx: Add support for the i.MX94 variant
- sdhci-of-dwcmshc: Add support for the RK3562/RK3528 variants
- sdhci-omap: Disable aggressive PM for eMMC/SD-cards
- sdhci-pci-core: Wait for VDD to settle on card power off
- sdhci-pxav3: Fix busy-signalling by using MMC_CAP_NEED_RSP_BUSY
- sunxi-mmc: Add support for the A523 variant
MEMSTICK:
- rtsx_usb_ms: Fix potential use-after-free during remove"
* tag 'mmc-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (27 commits)
mmc: core: Remove redundant null check
mmc: host: Wait for Vdd to settle on card power off
mmc: omap: Fix memory leak in mmc_omap_new_slot
memstick: rtsx_usb_ms: Fix slab-use-after-free in rtsx_usb_ms_drv_remove
mmc: renesas_sdhi: fix error code in renesas_sdhi_probe()
mmc: sdhci-pxav3: set NEED_RSP_BUSY capability
mmc: sdhci-omap: Disable MMC_CAP_AGGRESSIVE_PM for eMMC/SD
tty: mmc: sdio: use bool for cts and remove parentheses
dt-bindings: mmc: sunxi: add compatible strings for Allwinner A523
dt-bindings: mmc: sunxi: Simplify compatible string listing
dt-bindings: mmc: sdhci-of-dwcmhsc: Add compatible string for RK3528
dt-bindings: mmc: rockchip-dw-mshc: Add compatible string for RK3528
mmc: renesas_sdhi: Add support for RZ/G3E SoC
dt-bindings: mmc: renesas,sdhi: Document RZ/G3E support
dt-bindings: mmc: rockchip-dw-mshc: Add support for rk3562
dt-bindings: mmc: Add support for rk3562 eMMC
mmc: core: Trim trailing whitespace from card product names
dt-bindings: mmc: atmel,hsmci: Convert to json schema
dt-bindings: mmc: mmc-slot: Make compatible property optional
dt-bindings: mmc: fsl-imx-esdhc: Add i.MX94 support
...
