The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Pull MFD updates from Lee Jones:
"New Support & Features:
- Add extensive support for the Analog Devices ADP5589 I/O expander,
including core MFD, GPIO, PWM, and a new keypad matrix input
driver. This also adds support for handling various events
including GPI, keypad, reset and unlock ev ents
- Add support for the TI TPS652G1 PMIC, a stripped-down version of
the TPS65224, including core MFD, PFSM, pinctrl, and GPIO support
- Add support for the Apple Silicon System Management Controller
(SMC), including the core MFD driver which handles the RTKit-based
protocol, a new GPIO driver for PMU GPIOs, and a new
reboot/power-off driver.
Improvements & Fixes:
- Dynamically add ADP5585 sub-devices based on device tree properties
- Move ADP5585 oscillator control from the child PWM driver to the
main MFD driver to better handle shared resources
- Add support for a hardware reset pin and VDD regulator to the
ADP5585 driver
- Update the TPS65219 MFD cell's GPIO compatible string for the
TPS65214 to reflect hardware capabilities correctly
- Separate the ChromeOS EC charge-control probing from the USB-PD
subsystem, allowing it to probe independently based on the
dedicated EC_FEATURE_CHARGER
- Fix an interrupt naming typo in the MT6370 driver
- Fix RK806 PMIC reset behavior by allowing the reset mode to be
customized via a new device tree property
- Fix AXP20X regulator cell ID conflicts for secondary PMICs on
boards without an IRQ line connected
- Fix MT6397 keypad sub-device creation to use specific names instead
of a generic one, ensuring correct driver binding
- Fix a build warning in the stm32-timers driver by adding a missing
include for export.h.
Cleanups & Refactoring:
- Refactor the ADP5585 driver to simplify how regmap defaults are
handled, making it easier to add new chip variants
- Introduce per-chip register map structures for the ADP5585/ADP5589
family to handle differences between the devices
- Convert several drivers to use dev_fwnode() instead of
of_fwnode_handle()
- Make various static structures const in the cs40l50, rohm-bd71828,
tps65219, and twl6040 drivers
- Remove redundant pm_runtime_mark_last_busy() calls from several
drivers
- Alphabetize Kconfig entries for Cirrus Logic and Maxim drivers
- Remove unused fields from the 'tps65219' struct
- Update several MFD-related headers to follow the 'Include What You
Use' (IWYU) principle.
Removals:
- Remove the old, platform-data-based adp5589-keys input driver,
which is now superseded by the new MFD-based adp5585-keys driver
- Remove the unused twl6030_mmc_card_detect() functions and
associated header declarations
- Remove the now unused pcf50633/core.h header file
- Remove the fsl,imx8qxp-csr device tree binding, which was being
used incorrectly.
Device Tree Bindings Updates:
- Add support for the Analog Devices ADP5589 I/O expander to the
adi,adp5585.yaml binding
- Add new properties to the adi,adp5585.yaml binding for input
events, including keypad pins, unlock events, and reset events
- Add a reset-gpios property to the adi,adp5585.yaml binding
- Add the TI TPS652G1 PMIC to the ti,tps6594.yaml binding
- Add new bindings for the Apple Mac System Management Controller
(SMC) and its sub-devices: apple,smc.yaml, apple,smc-gpio.yaml, and
apple,smc-reboot.yaml
- Convert the Freescale MXS LRADC binding (mxs-lradc) to YAML schema
format
- Convert and combine the NXP LPC1850 CREG, DMAMUX, and USB OTG PHY
bindings into a single YAML schema file
- Convert the TI TPS65910 binding to YAML schema format
- Add a comment to the samsung,s2mps11.yaml binding to clarify the
use of 'oneOf' for interrupt properties
- Add the rockchip,reset-mode property to the rockchip,rk806.yaml
binding to allow customization of the PMIC's reset behavior"
* tag 'mfd-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (28 commits)
mfd: dt-bindings: Convert TPS65910 to DT schema
mfd: Minor Cirrus/Maxim Kconfig order fixes
mfd: Remove redundant pm_runtime_mark_last_busy() calls
mfd: mt6397: Do not use generic name for keypad sub-devices
mfd: axp20x: Set explicit ID for regulator cell if no IRQ line is present
mfd: mt6370: Fix the interrupt naming typo
mfd: rk8xx-core: Allow to customize RK806 reset mode
dt-bindings: mfd: rk806: Allow to customize PMIC reset mode
mfd: syscon: atmel-smc: Don't use "proxy" headers
mfd: madera: Don't use "proxy" headers
mfd: wm8350-core: Don't use "proxy" headers
dt-bindings: mfd: samsung,s2mps11: Add comment about interrupts properties
mfd: davinci_voicecodec: Don't use "proxy" headers
mfd: pcf50633: Remove the header file core.h
mfd: tps65219: Remove another unused field from 'struct tps65219'
mfd: tps65219: Remove an unused field from 'struct tps65219'
mfd: tps65219: Constify struct regmap_irq_sub_irq_map and tps65219_chip_data
mfd: rohm-bd71828: Constify some structures
dt-bindings: mfd: fsl,imx8qxp-csr: Remove binding documentation
mfd: axp20x: Set explicit ID for AXP313 regulator
...
Pull regulator updates from Mark Brown:
"The big change in this release is the addition of Rust bindings from
Daniel Almeida, allowing fairly basic consumer use with support for
enable and voltage setting operations. This should be good for the
vast majority of consumers.
Otherwise it's been quite quiet, a few new devices supported, plus
some cleanups and fixes.
Summary:
- Basic Rust bindings
- A fix for making large voltage changes on regulators where we limit
the size of voltage change we will do in one step, previously we
just got as close as we could in one step
- Cleanups of our usage of the PM autosuspend functions, this pulls
in some PM core changes on a shared tag
- Mode setting support for PCA9450
- Support for Mediatek MT6893 and MT8196 DVFSRC, Qualcomm PM7550 and
PMR735B, Raspberry Pi displays and TI TPS652G1
The TI driver pulls in the MFD portion of the support for the device
and the pinctrl driver which was in the same tag"
* tag 'regulator-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (40 commits)
regulator: mt6370: Fix spelling mistake in mt6370_regualtor_register
regulator: Kconfig: Fix spelling mistake "regualtor" -> "regulator"
regulator: core: repeat voltage setting request for stepped regulators
regulator: rt6160: Add rt6166 vout min_uV setting for compatible
MAINTAINERS: add regulator.rs to the regulator API entry
rust: regulator: add a bare minimum regulator abstraction
regulator: tps6286x-regulator: Fix a copy & paste error
regulator: qcom-rpmh: add support for pm7550 regulators
regulator: qcom-rpmh: add support for pmr735b regulators
regulator: dt-bindings: qcom,rpmh: Add PMR735B compatible
regulator: dt-bindings: qcom,rpmh: Add PM7550 compatible
regulator: tps6594-regulator: Add TI TPS652G1 PMIC regulators
regulator: tps6594-regulator: refactor variant descriptions
regulator: tps6594-regulator: remove hardcoded buck config
regulator: tps6594-regulator: remove interrupt_count
dt-bindings: mfd: ti,tps6594: Add TI TPS652G1 PMIC
pinctrl: pinctrl-tps6594: Add TPS652G1 PMIC pinctrl and GPIO
misc: tps6594-pfsm: Add TI TPS652G1 PMIC PFSM
mfd: tps6594: Add TI TPS652G1 support
regulator: sy8827n: make enable gpio NONEXCLUSIVE
...
Pull gpio updates from Bartosz Golaszewski:
"There's one new driver (Apple SMC) and extensions to existing drivers
for supporting new HW models. A lot of different impovements across
drivers and in core GPIO code. Details on that are in the signed tag
as usual.
We managed to remove some of the legacy APIs. Arnd Bergmann started to
work on making the legacy bits optional so that we may compile them
only for older platforms that still really need them.
Rob Herring has done a lot of work to convert legacy .txt dt-bindings
for GPIO controllers to YAML. There are only a few left now in the
GPIO tree.
A big part of the commits in this PR concern the conversion of GPIO
drivers to using the new line value setter callbacks. This conversion
is now complete treewide (unless I've missed something) and once all
the changes from different trees land in mainline, I'll send you
another PR containing a commit dropping the legacy callbacks from the
tree.
As the quest to pay back technical dept never really ends, we're
starting another set of interface conversions, this time it's about
moving fields specific to only a handful of drivers using the
gpio-mmio helper out of the core gpio_chip structure that every
controller implements and uses. This cycle we introduce a new set of
APIs and convert a few drivers under drivers/gpio/, next cycle we'll
convert remaining modules treewide (in gpio, pinctrl and mfd trees)
and finally remove the old interfaces and move the gpio-mmio fields
into their own structure wrapping gpio_chip.
One last change I should mention here is the rework of the sysfs
interface. In 2016, we introduced the GPIO character device as the
preferred alternative to the sysfs class under /sys/class/gpio. While
it has seen a wide adoption with the help of its user-space
counterpart - libgpiod - there are still users who prefer the
simplicity of sysfs.
As far as the GPIO subsystem is concerned, the problem is not the
existince of the GPIO class as such but rather the fact that it
exposes the global GPIO numbers to the user-space, stopping us from
ever being able to remove the numberspace from the kernel. To that
end, this release we introduced a parallel, limited sysfs interface
that doesn't expose these numbers and only implements a subset of
features that are relevant to the existing users. This is a result of
several discussions over the course of last year and should allow us
to remove the legacy part some time in the future.
Summary:
GPIOLIB core:
- introduce a parallel, limited sysfs user ABI that doesn't expose
the global GPIO numbers to user-space while maintaining backward
compatibility with the end goal of it completely replacing the
existing interface, allowing us to remove it
- remove the legacy devm_gpio_request() routine which has no more
users
- start the process of allowing to compile-out the legacy parts of
the GPIO core for users who don't need it by introducing a new
Kconfig option: GPIOLIB_LEGACY
- don't use global GPIO numbers in debugfs output from the core code
(drivers still do it, the work is ongoing)
- start the process of moving the fields specific to the gpio-mmio
helper out of the core struct gpio_chip into their own structure
that wraps it: create a new header with modern interfaces and
convert several drivers to using it
- remove the platform data structure associated with the gpio-mmio
helper from the kernel after having converted all remaining users
to generic device properties
- remove legacy struct gpio definition as it has no more users
New drivers:
- add the GPIO driver for the Apple System Management Controller
Driver improvements:
- add support for new models to gpio-adp5585, gpio-tps65219 and
gpio-pca953x
- extend the interrupt support in gpio-loongson-64bit
- allow to mark the simulated GPIO lines as invalid in gpio-sim
- convert all remaining GPIO drivers to using the new GPIO value
setter callbacks
- convert gpio-rcar to using simple device power management ops
callbacks
- don't check if current direction of a line is output before setting
the value in gpio-pisosr and ti-fpc202: the GPIO core already
handles that
- also drop unneeded GPIO range checks in drivers, the core already
makes sure we're within bounds when calling driver callbacks
- use dev_fwnode() where applicable across GPIO drivers
- set line value in gpio-zynqmp-modepin and gpio-twl6040 when the
user wants to change direction of the pin to output even though
these drivers don't need to do anything else to actually set the
direction, otherwise a call like gpiod_direction_output(d, 1) will
not result in the line driver high
- remove the reduntant call to pm_runtime_mark_last_busy() from
gpio-arizona
- use lock guards in gpio-cadence and gpio-mxc
- check the return values of regmap functions in gpio-wcd934x and
gpio-tps65912
- use better regmap interfaces in gpio-wcove and gpio-pca953x
- remove dummy GPIO chip callbacks from several drivers in cases
where the GPIO core can already handle their absence
- allow building gpio-palmas as a module
Fixes:
- use correct bit widths (according to the documentation) in
gpio-virtio
Device-tree bindings:
- convert several of the legacy .txt documents for many different
devices to YAML, improving automatic validation
- create a "trivial" GPIO DT schema that covers a wide range of
simple hardware that share a set of basic GPIO properties
- document new HW: Apple MAC SMC GPIO block and adp5589 I/O expander
- document a new model for pca95xx
- add and/or remove properties in YAML documents for gpio-rockchip,
fsl,qoriq-gpio, arm,pl061 and gpio-xilinx
Misc:
- some minor refactoring in several places, adding/removing forward
declarations, moving defines to better places, constify the
arguments in some functions, remove duplicate includes, etc.
- documentation updates"
* tag 'gpio-updates-for-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (202 commits)
MIPS: alchemy: gpio: use new GPIO line value setter callbacks for the remaining chips
gpiolib: enable CONFIG_GPIOLIB_LEGACY even for !GPIOLIB
gpio: virtio: Fix config space reading.
gpiolib: make legacy interfaces optional
dt-bindings: gpio: rockchip: Allow use of a power-domain
gpiolib: of: add forward declaration for struct device_node
power: reset: macsmc-reboot: Add driver for rebooting via Apple SMC
gpio: Add new gpio-macsmc driver for Apple Macs
mfd: Add Apple Silicon System Management Controller
soc: apple: rtkit: Make shmem_destroy optional
dt-bindings: mfd: Add Apple Mac System Management Controller
dt-bindings: power: reboot: Add Apple Mac SMC Reboot Controller
dt-bindings: gpio: Add Apple Mac SMC GPIO block
gpio: cadence: Remove duplicated include in gpio-cadence.c
gpio: tps65219: Add support for TI TPS65214 PMIC
gpio: tps65219: Update _IDX & _OFFSET macro prefix
gpio: sysfs: Fix an end of loop test in gpiod_unexport()
dt-bindings: gpio: Convert qca,ar7100-gpio to DT schema
dt-bindings: gpio: Convert maxim,max3191x to DT schema
dt-bindings: gpio: fsl,qoriq-gpio: Add missing mpc8xxx compatibles
...
I am switching my address to a personal domain, so some files in the
SGI IP30 and IOC3 files need to be updated. I will send updates for
the MAINTAINERS file and rtc-ds1685 separately to linux-rtc.
Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Originally an explicit ID for the AXP313/AXP323 regulator was set to
avoid a conflict with the primary AXP717 PMIC on Allwinner A523 family
boards.
This didn't entirely work since on some or all of these boards, the
interrupt line on this secondary PMIC was left unconnected, and thus
the driver would fall back to the generic "no interrupt; only regulators"
case, which didn't have the explicit ID set, thus undoing the intended
fix.
Also set an explicit ID for the regulator cell in the no IRQ generic
fall back case. This fixes the conflict for the AXP717 + AXP313/AXP323
case. For the actual single PMIC with no IRQ connected case, the ID does
not affect functionality, only the device naming of the regulator cell,
and by extension the name and path under sysfs.
Fixes: 249abf9b1e25 ("mfd: axp20x: Set explicit ID for AXP313 regulator")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20250701163652.252010-1-wens@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
The RK806 PMIC has a bitfield for configuring the restart/reset behavior
(which I assume Rockchip calls "function") whenever the PMIC is reset
either programmatically (c.f. DEV_RST in the datasheet) or via PWRCTRL
or RESETB pins.
For RK806, the following values are possible for RST_FUN:
0b00 means "Restart PMU"
0b01 means "Reset all the power off reset registers, forcing
the state to switch to ACTIVE mode"
0b10 means "Reset all the power off reset registers, forcing
the state to switch to ACTIVE mode, and simultaneously
pull down the RESETB PIN for 5mS before releasing"
0b11 means the same as for 0b10 just above.
This adds the appropriate logic in the driver to parse the new
rockchip,reset-mode DT property to pass this information. It just
happens that the values in the binding match the values to write in the
bitfield so no mapping is necessary.
If it is missing, the register is left untouched and relies either on
the silicon default or on whatever was set earlier in the boot stages
(e.g. the bootloader).
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250627-rk8xx-rst-fun-v4-2-ce05d041b45f@cherry.de
Signed-off-by: Lee Jones <lee@kernel.org>
'struct regmap_irq_sub_irq_map' and 'struct tps65219_chip_data' are not
modified in this driver.
Constifying these structures moves some data to a read-only section, so
increases overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
27804 10016 256 38076 94bc drivers/mfd/tps65219.o
After:
=====
text data bss dec hex filename
27893 9792 256 37941 9435 drivers/mfd/tps65219.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/117946696551de41b706ea9b973a7ccaacea5178.1750530460.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Lee Jones <lee@kernel.org>
Several structures are not modified in this driver. Constifying them moves
some data to a read-only section, so increases overall security, especially
when the structure holds some function pointers. This is the case for
'gpio_keys_platform_data' and 'mfd_cell'.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
18321 13952 192 32465 7ed1 drivers/mfd/rohm-bd71828.o
After:
=====
text data bss dec hex filename
22897 9376 192 32465 7ed1 drivers/mfd/rohm-bd71828.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/037e28e587ae899da9acdb45c606d75ec61f858b.1750501700.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Lee Jones <lee@kernel.org>
On newer boards featuring the A523 SoC, the AXP323 (related to the
AXP313) is paired with the AXP717 and serves as a secondary PMIC
providing additional regulator outputs. However the MFD cells are all
registered with PLATFORM_DEVID_NONE, which causes the regulator cells
to conflict with each other.
Commit e37ec32188 ("mfd: axp20x: Allow multiple regulators") attempted
to fix this by switching to PLATFORM_DEVID_AUTO so that the device names
would all be different, however that broke IIO channel mapping, which is
also tied to the device names. As a result the change was later reverted.
Instead, here we attempt to make sure the AXP313/AXP323 regulator cell
does not conflict by explicitly giving it an ID number. This was
previously done for the AXP809+AXP806 pair used with the A80 SoC.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20250619173207.3367126-1-wens@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
The charge-control subsystem in the ChromeOS EC is not strictly tied to
its USB-PD subsystem.
Since commit 7613bc0d11 ("mfd: cros_ec: Don't load charger with UCSI")
the presence of EC_FEATURE_UCSI_PPM would inhibit the probing of the
charge-control driver.
Furthermore recent versions of the EC firmware in Framework laptops
hard-disable EC_FEATURE_USB_PD to avoid probing cros-usbpd-charger,
which then also breaks cros-charge-control.
Instead use the dedicated EC_FEATURE_CHARGER.
Cc: stable@vger.kernel.org
Link: 1d7bcf1d50
Fixes: 555b5fcdb8 ("mfd: cros_ec: Register charge control subdevice")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Tested-by: Tom Vincent <linux@tlvince.com>
Link: https://lore.kernel.org/r/20250521-cros-ec-mfd-chctl-probe-v1-1-6ebfe3a6efa7@weissschuh.net
Signed-off-by: Lee Jones <lee@kernel.org>
The System Management Controller (SMC) on Apple Silicon machines is a
piece of hardware that exposes various functionalities such as
temperature sensors, voltage/power meters, shutdown/reboot handling,
GPIOs and more.
Communication happens via a shared mailbox using the RTKit protocol
which is also used for other co-processors. The SMC protocol then allows
reading and writing many different keys which implement the various
features. The MFD core device handles this protocol and exposes it
to the sub-devices.
Some of the sub-devices are potentially also useful on pre-M1 Apple
machines and support for SMCs on these machines can be added at a later
time.
Co-developed-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250610-smc-6-15-v7-5-556cafd771d3@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Merge series from Luca Weiss <luca.weiss@fairphone.com>:
Document and add support for the regulators on PM7550 and PMR735B, which
can be paired with the Milos SoC.
The ADP558x family supports a built in keypad matrix decoder which can
be added as an Input device. In order to both support the Input and the
GPIO device, we need to create a bitmap of the supported pins and track
their usage since they can either be used as GPIOs (GPIs) or as part of
the keymap.
We also need to mark special pins busy in case some features are being
used (ex: pwm or reset events).
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-14-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
The ADP558x family of devices can be programmed to respond to some
especial events, In case of the unlock events, one can lock the keypad
and use KEYS or GPIs events to unlock it. For the reset events, one can
again use a combinations of GPIs/KEYs in order to generate an event that
will trigger the device to generate an output reset pulse.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-13-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
There are some differences in the register map between the devices.
Hence, add a register structure per device. This will be needed in
following patches.
On top of that adp5585_fill_regmap_config() is renamed and reworked so
that the current struct adp5585_info act as template (they indeed
contain all the different data between variants) which can then be
complemented depending on the device (as identified by the id register).
This is done like this since a lot of the data is pretty much the same
between variants of the same device.
Reviewed-by: Lee Jones <lee@kernel.org>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-8-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
The only thing changing between variants is the regmap default
registers. Hence, instead of having a regmap configuration for every
variant (duplicating lots of fields), add a chip info type of structure
with a regmap ID to identify which defaults to use and populate
regmap_config at runtime given a template plus the id. Also note that
between variants, the defaults can be the same which means the chip info
structure can be used in more than one compatible.
This will also make it simpler adding new chips with more variants.
Also note that the chip info structures are deliberately not const as
they will also contain lots of members that are the same between the
different devices variants and so we will fill those at runtime.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-6-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
