Add mmio_remap bookkeeping to amdgpu_device and introduce
amdgpu_ttm_mmio_remap_bo_init()/fini() to manage a kernel-owned,
one-page (4K) BO in AMDGPU_GEM_DOMAIN_MMIO_REMAP.
Bookkeeping:
- adev->rmmio_remap.bo : kernel-owned singleton BO
The BO is allocated during TTM init when a remap bus address is available
(adev->rmmio_remap.bus_addr) and PAGE_SIZE <= AMDGPU_GPU_PAGE_SIZE (4K),
and freed during TTM fini.
v2:
- Check mmio_remap bus address (adev->rmmio_remap.bus_addr) instead of
rmmio_base. (Alex)
- Skip quietly if PAGE_SIZE > AMDGPU_GPU_PAGE_SIZE or no bus address
(no warn). (Alex)
- Use `amdgpu_bo_create()` (not *_kernel) - Only with this The object
is stored in adev->mmio_remap.bo and will later be exposed to
userspace via a GEM handle. (Christian)
v3:
- Remove obvious comment before amdgpu_ttm_mmio_remap_bo_fini() call.
(Alex)
v4:
- Squash bookkeeping into this patch (Christian)
Suggested-by: Christian König <christian.koenig@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a one-page TTM range manager for AMDGPU_PL_MMIO_REMAP via
amdgpu_ttm_init_on_chip(). This only registers the placement with TTM;
no BO is allocated in this patch.
The singleton 4K remap BO is created and freed in the following patch.
This split follows to separate heap bring-up from BO allocation.
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement TTM-level behavior for AMDGPU_PL_MMIO_REMAP so it behaves as a
CPU-visible IO page:
* amdgpu_evict_flags(): mark as unmovable
* amdgpu_res_cpu_visible(): consider CPU-visible
* amdgpu_bo_move(): use null move when src/dst is MMIO_REMAP
* amdgpu_ttm_io_mem_reserve(): program base/is_iomem/caching using
the device's mmio_remap_* metadata
* amdgpu_ttm_io_mem_pfn(): return PFN for the remapped HDP page
* amdgpu_ttm_tt_pde_flags(): set AMDGPU_PTE_SYSTEM for this mem type
v2:
- Drop HDP-specific comment; keep generic remap (Alex).
v3:
- Fix indentation in amdgpu_res_cpu_visible (Christian).
- Use adev->rmmio_remap.bus_addr for MMIO_REMAP bus/PFN calculations
(Alex).
v4:
- Drop unnecessary (resource_size_t) casts in MMIO_REMAP io-mem paths
(Alex)
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace kzalloc() followed by copy_from_user() with memdup_user() to
improve and simplify ta_if_load_debugfs_write() and
ta_if_invoke_debugfs_write().
No functional changes intended.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace kzalloc() followed by copy_from_user() with memdup_user() to
improve and simplify kfd_ioctl_set_cu_mask().
Return early if an error occurs and remove the obsolete 'out' label.
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace k(v)malloc_array() + copy_from_user() with (v)memdup_array_user().
This shrinks the source code and improves separation between the kernel
and userspace slabs.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace kmalloc_array() + copy_from_user() with memdup_array_user().
This shrinks the source code and improves separation between the kernel
and userspace slabs.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace kvmalloc_array() + copy_from_user() with vmemdup_array_user() on
the fast path.
This shrinks the source code and improves separation between the kernel
and userspace slabs.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
None of the pointer operations handled by the ring file requires
volatile, for this reason, this commit removes all occurrences of
volatile associated with rings.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The CSB buffer manipulation occurs in memory where the BO is mapped
during initialization, and some references to this buffer are handled
with volatile, which is incorrect in this scenario. There are a few
cases where the use of volatile is accepted, but none of them align with
CSB operations. Therefore, this commit removes all the volatile
variables associated with the CSB code.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Refactor: eliminate type casts by using proper u32
declarations.
v2:
- Address review comments. (Karthik)
v3:
- Use the proper u32 type and drop cast. (Lucas De Marchi)
- Modify variable when actually using u64 value.
- Change r value to reg_value with u32 type.
v4:
- Remove newline between trailer and Signed-off-by. (Lucas De Marchi)
- Change reg_val to val for more user-friendly logging.
- Use mul_u32_u32 function since both values are u32.
v5:
- mul_u32_u32 function with shift. (Lucas De Marchi)
Fixes: 7596d839f6 ("drm/xe/hwmon: Add support to manage power limits though mailbox")
Signed-off-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250912113458.2815172-1-mallesh.koujalagi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 4e1d3b5e64)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add a test for sending messages from every GuC to every other GuC to
test G2G communications.
Note that, being a debug only feature, the test interface only exists
in pre-production builds of the GuC firmware.
v2: Fix 'default' case to actually use the driver's registration code
as well as allocation. Add comments explaining the different test
types. Fix (C) date and an assert. Review feedback from Daniele.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://lore.kernel.org/r/20250910210237.603576-5-John.C.Harrison@Intel.com
If a bo is created via xe_managed_bo_create_pin_map() then it cannot be
freed by the driver using xe_bo_unpin_map_no_vm(), or indeed any other
existing function. The DRM layer will still have a pointer stashed
away for later freeing, causing a invalid memory access on driver
unload. So add a helper for releasing the DRM action as well.
v2: Drop 'xe' parameter (review feedbak from Michal W)
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://lore.kernel.org/r/20250910210237.603576-4-John.C.Harrison@Intel.com
Condition guards are found to be redundant, as the call flow is properly
managed now, as also observed in the Exynos5433 DECON driver. Since
state checking is no longer necessary, remove it.
This also fixes an issue which prevented decon_commit() from
decon_atomic_enable() due to an incorrect state change setting.
Fixes: 96976c3d9a ("drm/exynos: Add DECON driver")
Cc: stable@vger.kernel.org
Suggested-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Add support for Exynos7870's DSIM IP block in the bridge driver.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Presently, all devices refer to clock names from a single array. The
only controlling parameter is the number of clocks (num_clks field of
samsung_dsim_driver_data) which uses the first n clocks of that array.
As new devices are added, this approach turns out to be cumbersome.
Separate the clock names in individual arrays required by each variant,
in a struct clk_bulk_data. Add a pointer field to the driver data struct
which points to their respective clock names, and rework the clock usage
code to use the clk_bulk_* API instead.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Exynos7870's DSIM requires more time to stabilize its PLL. The current
timeout value, 1000, doesn't suffice. Increase the value to 3000, which
is just about enough as observed experimentally.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The PLL_STABLE bit of DSIM_DPHY_STATUS is hardcoded to BIT(31), but
Exynos7870's DSIM has it in BIT(24) as per downstream kernel sources.
In order to support both, move this bit value to the driver data struct
and define it for every driver compatible. Reference the value from
there instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Currently, PLL_P offset of DSIM_PLLCTRL is configurable in the driver
data, while PLL_M and PLL_S offsets are hardcoded as 4-bit and 1-bit
offsets respectively, but Exynos7870's DSIM have them at 3-bit and 0-bit
offsets as per downstream kernel sources.
In order to support both, move both offset values to the driver data
struct and define it for every driver compatible. Reference the values
from there instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The VIDEO_MODE bit of DSIM_CONFIG is hardcoded to BIT(25), but
Exynos7870's DSIM has it in BIT(18) as per downstream kernel sources.
In order to support both, move this bit value to the driver data struct
and define it for every driver compatible. Reference the value from
there instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The MAIN_VSA offset of DSIM_MSYNC is hardcoded to a 22-bit offset, but
Exynos7870's DSIM has it in a 16-bit offset as per the downstream kernel
sources.
In order to support both, move this offset value to the driver data
struct and define it for every driver compatible. Reference the value
from there instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
DSIM_CLKCTRL bit and offset values hardcoded in the driver:
name | bit/offset value
--------------------------+-----------------
DSIM_LANE_ESC_CLK_EN_CLK | 19
DSIM_LANE_ESC_CLK_EN_DATA | 20
DSIM_BYTE_CLKEN | 24
DSIM_ESC_CLKEN | 28
DSIM_TX_REQUEST_HSCLK | 31
DSIM_CLKCTRL bit and offset values in Exynos7870 DSIM as per downstream
kernel sources:
name | bit/offset value
--------------------------+-----------------
DSIM_LANE_ESC_CLK_EN_CLK | 8
DSIM_LANE_ESC_CLK_EN_DATA | 9
DSIM_BYTE_CLKEN | 17
DSIM_ESC_CLKEN | 16
DSIM_TX_REQUEST_HSCLK | 20
In order to support both, move all values to the driver data struct and
define it for every driver compatible. Reference the values from there
instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Exynos7870's DSIM device doesn't require waiting for the header FIFO
during a MIPI DSI transfer. Add a flag in the driver data in order to
control said behavior.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com
On Exynos7870 devices, enabling the display requires disabling
standby by writing to the SFRCTRL register. Add the register and related
bit values. Since this behavior isn't available on other SoCs, implement
a flag in the driver data struct indicating the availability of this
feature.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Exynos7870's DSIM has separate registers for LINK and DPHY status. This
is in contrast to older variants in the driver which use a single
register for both.
Add a driver data flag which indicates that the device variant supports
the legacy status register. Change the register read calls
appropriately.
Suggested-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
When building with -Wincompatible-function-pointer-types-strict, a
warning designed to catch kernel control flow integrity (kCFI) issues at
build time, there is an instance in the new tiny DRM pixpaper driver:
drivers/gpu/drm/tiny/pixpaper.c:982:16: error: incompatible function pointer types initializing 'enum drm_mode_status (*)(struct drm_crtc *, const struct drm_display_mode *)' with an expression of type 'int (struct drm_crtc *, const struct drm_display_mode *)' [-Werror,-Wincompatible-function-pointer-types-strict]
982 | .mode_valid = pixpaper_mode_valid,
| ^~~~~~~~~~~~~~~~~~~
While 'int' and 'enum drm_mode_status' are ABI compatible, hence no
regular warning from -Wincompatible-function-pointer-types, the mismatch
will trigger a kCFI violation when pixpaper_mode_valid() is called
indirectly.
Update the return type of pixpaper_mode_valid() to be
'enum drm_mode_status' to clear up the warning and kCFI violation.
Fixes: c9e70639f5 ("drm: tiny: Add support for Mayqueen Pixpaper e-ink panel")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250908-drm-pixpaper-fix-mode_valid-return-type-v1-1-705ceaf03757@kernel.org
Interacting with the GSP currently requires using definitions from C
header files. Rust definitions for the types needed for Nova core will
be generated using the Rust bindgen tool. This patch adds the base
module to allow inclusion of the generated bindings. The generated
bindings themselves are added by subsequent patches when they are first
used.
Currently we only intend to support a single firmware version, 570.144,
with these bindings. Longer term we intend to move to a more stable GSP
interface that isn't tied to specific firmware versions.
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
[acourbot@nvidia.com: adapt the bindings module comment a bit]
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250913-nova_firmware-v6-10-9007079548b0@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
570.144 is the latest available into linux-firmware as of this commit,
and the one we will use to start development of nova-core. It should
eventually be dropped for a newer version before the driver becomes able
to do anything useful. The newer firmware is expected to iron out some
of the inelegances of 570.144, notably related to packaging.
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250913-nova_firmware-v6-9-9007079548b0@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
The GSP bootloader is a small RISC-V firmware that is loaded by Booter
onto the GSP core and is in charge of loading, validating, and starting
the actual GSP firmware.
It is a regular binary firmware file containing a specific header.
Create a type holding the DMA-mapped firmware as well as useful
information extracted from the header, and hook it into our firmware
structure for later use.
The GSP bootloader is stored into the `GspFirmware` structure, since it
is part of the GSP firmware package. This makes the `Firmware` structure
empty, so remove it.
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250913-nova_firmware-v6-8-9007079548b0@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
The GSP firmware is a binary blob that is verified, loaded, and run by
the GSP bootloader. Its presentation is a bit peculiar as the GSP
bootloader expects to be given a DMA address to a 3-levels page table
mapping the GSP firmware at address 0 of its own address space.
Prepare such a structure containing the DMA-mapped firmware as well as
the DMA-mapped page tables, and a way to obtain the DMA handle of the
level 0 page table.
Then, move the GSP firmware instance from the `Firmware` struct to the
`start_gsp` method since it doesn't need to be kept after the GSP is
booted.
As we are performing the required ELF section parsing and radix3 page
table building, remove these items from the TODO file.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250913-nova_firmware-v6-7-9007079548b0@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
The Booter signed firmware is an essential part of bringing up the GSP
on Turing and Ampere. It is loaded on the sec2 falcon core and is
responsible for loading and running the RISC-V GSP bootloader into the
GSP core.
Add support for parsing the Booter firmware loaded from userspace, patch
its signatures, and store it into a form that is ready to be loaded and
executed on the sec2 falcon.
Then, move the Booter instance from the `Firmware` struct to the
`start_gsp` method since it doesn't need to be kept after the GSP is
booted.
We do not run Booter yet, as its own payload (the GSP bootloader and
firmware image) still need to be prepared.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250913-nova_firmware-v6-6-9007079548b0@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
