Currently, if find_and_map_user_pages() takes a DMA xfer request from the
user with a length field set to 0, or in a rare case, the host receives
QAIC_TRANS_DMA_XFER_CONT from the device where resources->xferred_dma_size
is equal to the requested transaction size, the function will return 0
before allocating an sgt or setting the fields of the dma_xfer struct.
In that case, encode_addr_size_pairs() will try to access the sgt which
will lead to a general protection fault.
Return an EINVAL in case the user provides a zero-sized ALP, or the device
requests continuation after all of the bytes have been transferred.
Fixes: 96d3c1cade ("accel/qaic: Clean up integer overflow checking in map_user_pages()")
Signed-off-by: Youssef Samir <quic_yabdulra@quicinc.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251007122320.339654-1-youssef.abdulrahman@oss.qualcomm.com
On HL338 ASICs, the Infineon first‑stage firmware is not present and
the reported version is 0. In this case printing a version number is
misleading, as it suggests valid firmware when it does not exist.
Fix this by printing the first‑stage Infineon firmware version only
if the reported value is non‑zero. This avoids confusing or incorrect
log messages on devices where the first stage is not applicable.
Signed-off-by: Pavan S <pavan.sreenivas@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
Dirty state can occur when the host VM undergoes a reset while the
device does not. In such a case, the driver must reset the device before
it can be used again. As part of this reset, the device capabilities
are zeroed. Therefore, the driver must read the Preboot status again to
learn the Preboot state, capabilities, and security configuration.
Signed-off-by: Konstantin Sinyuk <konstantin.sinyuk@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
Add a new passthrough type HL_GET_P_STATE to the cpucp generic ioctl
to allow userspace to read the device performance state via firmware.
Signed-off-by: Ariel Aviad <ariel.aviad@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
Introduce NVMe Direct I/O (HLDIO) infrastructure to support
peer‑to‑peer DMA in the habanalabs driver. This adds internal helpers
and data structures to enable direct transfers between NVMe storage
and device memory.
The feature is built only when CONFIG_HL_HLDIO is enabled. A debugfs
interface is also provided for functional validation.
Signed-off-by: Konstantin Sinyuk <konstantin.sinyuk@intel.com>
Reviewed-by: Farah Kassabri <farah.kassabri@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
When IOMMU is enabled, dma_alloc_coherent() with GFP_USER may return
addresses from the vmalloc range. If such an address is mapped without
VM_MIXEDMAP, vm_insert_page() will trigger a BUG_ON due to the
VM_PFNMAP restriction.
Fix this by checking for vmalloc addresses and setting VM_MIXEDMAP
in the VMA before mapping. This ensures safe mapping and avoids kernel
crashes. The memory is still driver-allocated and cannot be accessed
directly by userspace.
Signed-off-by: Moti Haimovski <moti.haimovski@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
The access_ok() API no longer requires the VERIFY_WRITE argument,
and the use of the old interface with VERIFY_WRITE is deprecated.
Clean up the habanalabs memory manager to use the modern access_ok()
interface consistently. This removes old #ifdef guards and aligns the
driver with current upstream kernel APIs.
Signed-off-by: Ilia Levi <ilia.levi@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
After CPLD shutdown event the device is not usable anymore. The common
CPLD_SHUTDOWN event handler disables any subsequent device access.
Signed-off-by: Konstantin Sinyuk <konstantin.sinyuk@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
After a CPLD shutdown event the device becomes unusable. Prevent further
device access once this event is received.
Signed-off-by: Konstantin Sinyuk <konstantin.sinyuk@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
In hl_release_dmabuf(), ctx is dereferenced after calling hl_ctx_put()
to obtain the compute device file.
This is safe because the dma-buf object holds a file reference taken in
export_dmabuf(), and the file release (which drops another ctx reference)
can only happen after we drop that file reference via fput(). Thus, this
hl_ctx_put() call cannot be the last one at this point.
Add a comment explaining this to avoid confusion.
Signed-off-by: Tomer Tayar <tomer.tayar@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
Add infrastructure for logging the last configuration register accesses
that occur via debugfs read/write operations. At interrupt time, these
log entries can be dumped to dmesg, which helps in diagnosing the cause
of RAZWI and ADDR_DEC interrupts.
The logging is implemented as a ring buffer of access entries, with each
entry recording timestamp and access details. To ensure correctness
under concurrent access, operations are now protected using spinlocks.
Entries are copied under lock and then printed after releasing it, which
minimizes time spent in the critical section.
Signed-off-by: Sharley Calzolari <sharley.calzolari@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
Change the BMON_CR register value back to its original state before
enabling, so that BMON does not continue to collect information
after being disabled.
Signed-off-by: Vered Yavniely <vered.yavniely@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
EFAULT is currently returned if less than requested user pages are
pinned. This value means a "bad address" which might be confusing to
the user, as the address of the given user memory is not necessarily
"bad".
Modify the return value to ENOMEM, as "out of memory" is more suitable
in this case.
Signed-off-by: Tomer Tayar <tomer.tayar@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
Use disable_work_sync() instead of cancel_work_sync() in ivpu_dev_fini()
to ensure that no new recovery work items can be queued after device
removal has started. Previously, recovery work could be scheduled even
after canceling existing work, potentially leading to use-after-free
bugs if recovery accessed freed resources.
Rename ivpu_pm_cancel_recovery() to ivpu_pm_disable_recovery() to better
reflect its new behavior.
Fixes: 58cde80f45 ("accel/ivpu: Use dedicated work for job timeout detection")
Cc: stable@vger.kernel.org # v6.8+
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250808110939.328366-1-jacek.lawrynowicz@linux.intel.com
The problem is that pm_runtime_get_sync() can return 1 on success so
checking for zero doesn't work. Use the pm_runtime_resume_and_get()
function instead. The pm_runtime_resume_and_get() function does
additional cleanup as well so that's a bonus as well.
Fixes: 0810d5ad88 ("accel/rocket: Add job submission IOCTL")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Link: https://lore.kernel.org/r/aKcRW6fsRP_o5C_y@stanley.mountain
With the current dependency on only DRM, a config of
CONFIG_DRM_ACCEL_ROCKET=y
is possible, but of course wrong, because without DRM_ACCEL the build-
system will never even enter drivers/accel/* .
So depend on DRM_ACCEL instead of just DRM.
Fixes: ed98261b41 ("accel/rocket: Add a new driver for Rockchip's NPU")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Link: https://lore.kernel.org/r/20250814113519.1551855-3-heiko@sntech.de
Change the 'ret' variable from u32 to int to store -EINVAL. Storing the
negative error codes in unsigned type, doesn't cause an issue at runtime
but it's ugly as pants.
Additionally, assigning -EINVAL to u32 ret (i.e., u32 ret = -EINVAL) may
trigger a GCC warning when the -Wsign-conversion flag is enabled.
Fixes: aac243092b ("accel/amdxdna: Add command execution")
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250828033917.113364-1-rongqianfeng@vivo.com
drm-misc-next for v6.18:
UAPI Changes:
- Add DRM_IOCTL_GEM_CHANGE_HANDLE for reassigning GEM handles
- Document DRM_MODE_PAGE_FLIP_EVENT
Cross-subsystem Changes:
fbcon:
- Add missing declarations in fbcon.h
Core Changes:
bridge:
- Fix ref counting
panel:
- Replace and remove mipi_dsi_generic_write_{seq/_chatty}()
sched:
- Fixes
Rust:
- Drop Opaque<> from ioctl arguments
Driver Changes:
amdxdma:
- Support buffers allocated by user space
- Streamline PM interfaces
- Fixes
bridge:
- cdns-dsi: Various improvements to mode setting
- Support Solomon SSD2825 plus DT bindings
- Support Waveshare DSI2DPI plus DT bindings
gud:
- Fixes
ivpu:
- Fixes
nouveau:
- Use GSP firmware by default
- Fixes
panel:
- panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
Support SHP LQ134Z1; Fixes
- panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
- Support Samsung AMS561RA01
- Support Hydis HV101HD1 plus DT bindings
panthor:
- Print task/pid on errors
- Fixes
renesas:
- convert to RUNTIME_PM_OPS
repaper:
- Use shadow-plane helpers
rocket:
- Add driver for Rockchip NPU plus DT bindings
sharp-memory:
- Use shadow-plane helpers
simpledrm:
- Use of_reserved_mem_region_to_resource() helper
tidss:
- Use crtc_ fields for programming display mode
- Remove other drivers from aperture
v3d:
- Support querying nubmer of GPU resets for KHR_robustness
vmwgfx:
- Fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250814072454.GA18104@linux.fritz.box
Pull habanalabs fix from Al Viro:
"Yet another use-after-free fix due to dma_buf_fd() misuse"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
habanalabs: fix UAF in export_dmabuf()
Pull drm updates from Dave Airlie:
"Highlights:
- Intel xe enable Panthor Lake, started adding WildCat Lake
- amdgpu has a bunch of reset improvments along with the usual IP
updates
- msm got VM_BIND support which is important for vulkan sparse memory
- more drm_panic users
- gpusvm common code to handle a bunch of core SVM work outside
drivers.
Detail summary:
Changes outside drm subdirectory:
- 'shrink_shmem_memory()' for better shmem/hibernate interaction
- Rust support infrastructure:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
- mtd driver for Intel GPU non-volatile storage
- i2c designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support"
* tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits)
drm/tidss: oldi: convert to devm_drm_bridge_alloc() API
drm/tidss: encoder: convert to devm_drm_bridge_alloc()
drm/amdgpu: move reset support type checks into the caller
drm/amdgpu/sdma7: re-emit unprocessed state on ring reset
drm/amdgpu/sdma6: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5: re-emit unprocessed state on ring reset
drm/amdgpu/gfx12: re-emit unprocessed state on ring reset
drm/amdgpu/gfx11: re-emit unprocessed state on ring reset
drm/amdgpu/gfx10: re-emit unprocessed state on ring reset
drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset
drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset
drm/amdgpu: Add WARN_ON to the resource clear function
drm/amd/pm: Use cached metrics data on SMUv13.0.6
drm/amd/pm: Use cached data for min/max clocks
gpu: nova-core: fix bounds check in PmuLookupTableEntry::new
drm/amdgpu: Replace HQD terminology with slots naming
drm/amdgpu: Add user queue instance count in HW IP info
drm/amd/amdgpu: Add helper functions for isp buffers
drm/amd/amdgpu: Initialize swnode for ISP MFD device
...
The NPU cores have their own access to the memory bus, and this isn't
cache coherent with the CPUs.
Add IOCTLs so userspace can mark when the caches need to be flushed, and
also when a writer job needs to be waited for before the buffer can be
accessed from the CPU.
Initially based on the same IOCTLs from the Etnaviv driver.
v2:
- Don't break UABI by reordering the IOCTL IDs (Jeff Hugo)
v3:
- Check that padding fields in IOCTLs are zero (Jeff Hugo)
v6:
- Fix conversion logic to make sure we use DMA_BIDIRECTIONAL when needed
(Lucas Stach)
v8:
- Always sync BOs in both directions (Robin Murphy)
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250721-6-10-rocket-v9-5-77ebd484941e@tomeuvizoso.net
Using the DRM GPU scheduler infrastructure, with a scheduler for each
core.
Userspace can decide for a series of tasks to be executed sequentially
in the same core, so SRAM locality can be taken advantage of.
The job submission code was initially based on Panfrost.
v2:
- Remove hardcoded number of cores
- Misc. style fixes (Jeffrey Hugo)
- Repack IOCTL struct (Jeffrey Hugo)
v3:
- Adapt to a split of the register block in the DT bindings (Nicolas
Frattaroli)
- Make use of GPL-2.0-only for the copyright notice (Jeff Hugo)
- Use drm_* logging functions (Thomas Zimmermann)
- Rename reg i/o macros (Thomas Zimmermann)
- Add padding to ioctls and check for zero (Jeff Hugo)
- Improve error handling (Nicolas Frattaroli)
v6:
- Use mutexes guard (Markus Elfring)
- Use u64_to_user_ptr (Jeff Hugo)
- Drop rocket_fence (Rob Herring)
v7:
- Assign its own IOMMU domain to each client, for isolation (Daniel
Stone and Robin Murphy)
v8:
- Use reset lines to reset the cores (Robin Murphy)
- Use the macros to compute the values for the bitfields (Robin Murphy)
- More descriptive name for the IRQ (Robin Murphy)
- Simplify job interrupt handing (Robin Murphy)
- Correctly acquire a reference to the IOMMU (Robin Murphy)
- Specify the size of the embedded structs in the IOCTLs for future
extensibility (Rob Herring)
- Expose only 32 bits for the address of the regcmd BO (Robin Murphy)
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250721-6-10-rocket-v9-4-77ebd484941e@tomeuvizoso.net
This uses the SHMEM DRM helpers and we map right away to the CPU and NPU
sides, as all buffers are expected to be accessed from both.
v2:
- Sync the IOMMUs for the other cores when mapping and unmapping.
v3:
- Make use of GPL-2.0-only for the copyright notice (Jeff Hugo)
v6:
- Use mutexes guard (Markus Elfring)
v7:
- Assign its own IOMMU domain to each client, for isolation (Daniel
Stone and Robin Murphy)
v8:
- Correctly acquire a reference to the IOMMU (Robin Murphy)
- Allocate DMA address ourselves with drm_mm (Robin Murphy)
- Use refcount_read (Heiko Stuebner)
- Remove superfluous dma_sync_sgtable_for_device (Robin Murphy)
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250721-6-10-rocket-v9-3-77ebd484941e@tomeuvizoso.net
This initial version supports the NPU as shipped in the RK3588 SoC and
described in the first part of its TRM, in Chapter 36.
This NPU contains 3 independent cores that the driver can submit jobs
to.
This commit adds just hardware initialization and power management.
v2:
- Split cores and IOMMUs as independent devices (Sebastian Reichel)
- Add some documentation (Jeffrey Hugo)
- Be more explicit in the Kconfig documentation (Jeffrey Hugo)
- Remove resets, as these haven't been found useful so far (Zenghui Yu)
- Repack structs (Jeffrey Hugo)
- Use DEFINE_DRM_ACCEL_FOPS (Jeffrey Hugo)
- Use devm_drm_dev_alloc (Jeffrey Hugo)
- Use probe log helper (Jeffrey Hugo)
- Introduce UABI header in a later patch (Jeffrey Hugo)
v3:
- Adapt to a split of the register block in the DT bindings (Nicolas
Frattaroli)
- Move registers header to its own commit (Thomas Zimmermann)
- Misc. cleanups (Thomas Zimmermann and Jeff Hugo)
- Make use of GPL-2.0-only for the copyright notice (Jeff Hugo)
- PM improvements (Nicolas Frattaroli)
v4:
- Use bulk clk API (Krzysztof Kozlowski)
v6:
- Remove mention to NVDLA, as the hardware is only incidentally related
(Kever Yang)
- Use calloc instead of GFP_ZERO (Jeff Hugo)
- Explicitly include linux/container_of.h (Jeff Hugo)
- pclk and npu clocks are now needed by all cores (Rob Herring)
v7:
- Assign its own IOMMU domain to each client, for isolation (Daniel
Stone and Robin Murphy)
v8:
- Kconfig: fix depends to be more explicit about Rockchip, and remove
superfluous selects (Robin Murphy)
- Use reset lines to reset the cores (Robin Murphy)
- Reference count the module
- Set dma_set_max_seg_size
- Correctly acquire a reference to the IOMMU (Robin Murphy)
- Remove notion of top core (Robin Murphy)
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250721-6-10-rocket-v9-2-77ebd484941e@tomeuvizoso.net
Among the scheduler's statuses, the only one that indicates an error is
DRM_GPU_SCHED_STAT_ENODEV. Any status other than DRM_GPU_SCHED_STAT_ENODEV
signifies that the operation succeeded and the GPU is in a nominal state.
However, to provide more information about the GPU's status, it is needed
to convey more information than just "OK".
Therefore, rename DRM_GPU_SCHED_STAT_NOMINAL to
DRM_GPU_SCHED_STAT_RESET, which better communicates the meaning of this
status. The status DRM_GPU_SCHED_STAT_RESET indicates that the GPU has
hung, but it has been successfully reset and is now in a nominal state
again.
Reviewed-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250714-sched-skip-reset-v6-1-5c5ba4f55039@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
