Export blk_crypto_derive_sw_secret(), blk_crypto_import_key(),
blk_crypto_generate_key(), and blk_crypto_prepare_key() so that they can
be used by device-mapper when passing through wrapped key support.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
In case of a ZONE APPEND write, regardless of native ZONE APPEND or the
emulation layer in the zone write plugging code, the sector the data got
written to by the device needs to be updated in the bio.
At the moment, this is done for every native ZONE APPEND write and every
request that is flagged with 'BIO_ZONE_WRITE_PLUGGING'. But thus
superfluously updates the sector for regular writes to a zoned block
device.
Check if a bio is a native ZONE APPEND write or if the bio is flagged as
'BIO_EMULATES_ZONE_APPEND', meaning the block layer's zone write plugging
code handles the ZONE APPEND and translates it into a regular write and
back. Only if one of these two criterion is met, update the sector in the
bio upon completion.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/dea089581cb6b777c1cd1500b38ac0b61df4b2d1.1746530748.git.jth@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In case of a ZONE APPEND write, regardless of native ZONE APPEND or the
emulation layer in the zone write plugging code, the sector the data got
written to by the device needs to be updated in the bio.
At the moment, this is done for every native ZONE APPEND write and every
request that is flagged with 'BIO_ZONE_WRITE_PLUGGING'. But thus
superfluously updates the sector for regular writes to a zoned block
device.
Check if a bio is a native ZONE APPEND write or if the bio is flagged as
'BIO_EMULATES_ZONE_APPEND', meaning the block layer's zone write plugging
code handles the ZONE APPEND and translates it into a regular write and
back. Only if one of these two criterion is met, update the sector in the
bio upon completion.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/dea089581cb6b777c1cd1500b38ac0b61df4b2d1.1746530748.git.jth@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
scheduler's ->exit() is called with queue frozen and elevator lock is held, and
wbt_enable_default() can't be called with queue frozen, otherwise the
following lockdep warning is triggered:
#6 (&q->rq_qos_mutex){+.+.}-{4:4}:
#5 (&eq->sysfs_lock){+.+.}-{4:4}:
#4 (&q->elevator_lock){+.+.}-{4:4}:
#3 (&q->q_usage_counter(io)#3){++++}-{0:0}:
#2 (fs_reclaim){+.+.}-{0:0}:
#1 (&sb->s_type->i_mutex_key#3){+.+.}-{4:4}:
#0 (&q->debugfs_mutex){+.+.}-{4:4}:
Fix the issue by moving wbt_enable_default() out of bfq's exit(), and
call it from elevator_change_done().
Meantime add disk->rqos_state_mutex for covering wbt state change, which
matches the purpose more than ->elevator_lock.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250505141805.2751237-26-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move hctx cpuhp add/del out of queue freezing for not connecting freeze
lock with cpuhp locks, then lockdep warning can be avoided.
This way is safe because both needn't queue to be frozen and scheduler
switch isn't allowed, with same reason for moving hctx debugfs/sysfs
register out of queue freeze.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250505141805.2751237-25-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Both blk_mq_map_swqueue() and blk_mq_realloc_hw_ctxs() are called before
the request queue is added to tagset list, so the two won't run concurrently
with blk_mq_update_nr_hw_queues().
When the two functions are only called from queue initialization or
blk_mq_update_nr_hw_queues(), elevator switch can't happen.
So remove ->elevator_lock uses from the two functions.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250505141805.2751237-24-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move hctx debugfs/sysfs register out of freezing queue in
__blk_mq_update_nr_hw_queues(), so that the following lockdep dependency
can be killed:
#2 (&q->q_usage_counter(io)#16){++++}-{0:0}:
#1 (fs_reclaim){+.+.}-{0:0}:
#0 (&sb->s_type->i_mutex_key#3){+.+.}-{4:4}: //debugfs
And registering/un-registering hctx debugfs/sysfs does not require queue to
be frozen:
- hctx sysfs attributes show() are drained when removing kobject, and
there isn't store() implementation for hctx sysfs attributes
- debugfs entry read() is drained too when removing debugfs directory,
and there isn't write() implementation for hctx debugfs too
- so it is safe to register/unregister hctx sysfs/debugfs without
freezing queue because the cod paths changes nothing, and we just
need to keep hctx live
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-23-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move elv_register[unregister]_queue out of ->elevator_lock & queue freezing,
so we can kill many lockdep warnings.
elv_register[unregister]_queue() is serialized, and just dealing with sysfs/
debugfs things, no need to be done with queue frozen:
- when it is called from adding disk, elevator switch isn't possible
because ->queue_kobj isn't added yet
- when it is called from deleting disk, disable_elv_switch() is
responsible for preventing new elevator switch and draining old
elevator switch.
- when it is called from blk_mq_update_nr_hw_queues(), adding/removing
disk and elevator switch can't be allowed or in-progress
With this change, elevator's ->exit() is called before calling
elv_unregister_queue, then user may call into ->show()/store() of elevator's
sysfs attributes, and we have covered this issue by adding `ELEVATOR_FLAG_DYNG`.
For blk-mq debugfs, hctx->sched_tags is always checked with ->elevator_lock by
debugfs code, meantime hctx->sched_tags is updated with ->elevator_lock, so
there isn't such issue.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250505141805.2751237-22-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add new helper disable_elv_switch() and new flag QUEUE_FLAG_NO_ELV_SWITCH
for disabling elevator switch before deleting disk:
- originally flag QUEUE_FLAG_REGISTERED is added for preventing elevator
switch during removing disk, but this flag has been used widely for
other purposes, so add one new flag for disabling elevator switch only
- for avoiding deadlock risk, we have to move elevator queue
register/unregister out of elevator lock and queue freeze, which will be
done in next patch. However, this way adds small race window between elevator
switch and deleting ->queue_kobj, in which elevator queue register/unregister
could be run concurrently. The added helper will be used for avoiding the race
in the following patch.
- drain in-progress elevator switch before deleting disk
Suggested-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-21-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Prepare for moving elv_register[unregister]_queue out of elevator_lock
& queue freezing, so we may have to call elv_unregister_queue() after
elevator ->exit() is called, then there is small window for user to
call into ->show()/store(), and user-after-free can be caused.
Fail to show/store elevator sysfs attribute if elevator is dying by
adding one new flag of ELEVATOR_FLAG_DYNG, which is protected by
elevator ->sysfs_lock.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20250505141805.2751237-20-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass elevator_queue reference to elv_register_queue() & elv_unregister_queue().
No functional change, and prepare for moving the two out of elevator
lock & freezing queue, when we need to store the old & new elevator
queue in `struct elv_change_ctx` instance, then both two can co-exist
for short while, so we have to pass the exact elevator_queue instance
to elv_register_queue & unregister_queue.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-18-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Elevator change is one well-define behavior:
- tear down current elevator if it exists
- setup new elevator
It is supposed to cover any case for changing elevator by single
internal API, typically the following cases:
- setup default elevator in add_disk()
- switch to none in del_disk()
- reset elevator in blk_mq_update_nr_hw_queues()
- switch elevator in sysfs `store` elevator attribute
This patch uses elevator_change() to cover all above cases:
- every elevator switch is serialized with each other: add_disk/del_disk/
store elevator is serialized already, blk_mq_update_nr_hw_queues() uses
srcu for syncing with the other three cases
- for both add_disk()/del_disk(), queue freeze works at atomic mode
or has been froze, so the freeze in elevator_change() won't add extra
delay
- `struct elev_change_ctx` instance holds any info for changing elevator
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-17-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add `struct elv_change_ctx` and prepare for unifying elevator change by
elevator_change(). With this way, any input & output parameter can
be provided & observed in top helper.
This way helps to move kobject add/delete & debugfs register/unregister
out of ->elevator_lock & freezing queue.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250505141805.2751237-16-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In blk_mq_update_nr_hw_queues(), nr_hw_queues changes and elevator data
depends on it, and elevator has to be reattached, so call elevator_switch()
to force attachment.
Add elv_update_nr_hw_queues() simply for blk_mq_update_nr_hw_queues() to
reattach elevator, since elevator switch isn't likely when running
blk_mq_update_nr_hw_queues(). This way removes the current switch
none and switch back code.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-14-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ELEVATOR_FLAG_DISABLE_WBT is only used by BFQ to disallow wbt when BFQ is
in use. The flag is set in BFQ's init(), and cleared in BFQ's exit().
Making it as request queue flag, so that we can avoid to deal with elevator
switch race. Also it isn't graceful to checking one scheduler flag in
wbt_enable_default().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now the tg->[bytes/io]_disp type is signed, and calculate_bytes/io_allowed
return type is unsigned. Even if the bps/iops limit is not set to max, the
return value of the function may still exceed INT_MAX or LLONG_MAX, which
can cause overflow in outer variables. In such cases, we can add additional
checks accordingly.
And in throtl_trim_slice(), if the BPS/IOPS limit is set to max, there's
no need to call calculate_bytes/io_allowed(). Introduces the helper
functions throtl_trim_bps/iops to simplifies the process. For cases when
the calculated trim value exceeds INT_MAX (causing an overflow), we reset
tg->[bytes/io]_disp to zero, so return original tg->[bytes/io]_disp because
it is the size that is actually trimmed.
Signed-off-by: Zizhi Wo <wozizhi@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250417132054.2866409-4-wozizhi@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In commit 6cc477c368 ("blk-throttle: carry over directly"), the carryover
bytes/ios was be carried to [bytes/io]_disp. However, its update mechanism
has some issues.
In __tg_update_carryover(), we calculate "bytes" and "ios" to represent the
carryover, but the computation when updating [bytes/io]_disp is incorrect.
And if the sq->nr_queued is empty, we may not update tg->[bytes/io]_disp to
0 in tg_update_carryover(). We should set it to 0 in non carryover case.
This patch fixes the issue.
Fixes: 6cc477c368 ("blk-throttle: carry over directly")
Signed-off-by: Zizhi Wo <wozizhi@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250417132054.2866409-2-wozizhi@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_flush_plug_list() has a fast path if all requests in the plug
are destined for the same request_queue. It calls ->queue_rqs() with the
whole batch of requests, falling back on ->queue_rq() for any requests
not handled by ->queue_rqs(). However, if the requests are destined for
multiple queues, blk_mq_flush_plug_list() has a slow path that calls
blk_mq_dispatch_list() repeatedly to filter the requests by ctx/hctx.
Each queue's requests are inserted into the hctx's dispatch list under a
spinlock, then __blk_mq_sched_dispatch_requests() takes them out of the
dispatch list (taking the spinlock again), and finally
blk_mq_dispatch_rq_list() calls ->queue_rq() on each request.
Acquiring the hctx spinlock twice and calling ->queue_rq() instead of
->queue_rqs() makes the slow path significantly more expensive. Thus,
batching more requests into a single plug (e.g. io_uring_enter syscall)
can counterintuitively hurt performance by causing the plug to span
multiple queues. We have observed 2-3% of CPU time spent acquiring the
hctx spinlock alone on workloads issuing requests to multiple NVMe
devices in the same io_uring SQE batches.
Add a medium path in blk_mq_flush_plug_list() for plugs that don't have
elevators or come from a schedule, but do span multiple queues. Filter
the requests by queue and call ->queue_rqs()/->queue_rq() on the list of
requests destined to each request_queue.
With this change, we no longer see any CPU time spent in _raw_spin_lock
from blk_mq_flush_plug_list and throughput increases accordingly.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250426011728.4189119-4-csander@purestorage.com
[axboe: fix whitespace damage]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_plug_issue_direct(), __blk_mq_flush_plug_list(), and
blk_mq_dispatch_plug_list() take a struct blk_plug * but only use its
mq_list. Pass the struct rq_list * instead in preparation for calling
them with other lists of requests.
Drop "plug" from the function names as they are no longer plug-specific.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250426011728.4189119-2-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We need two patches inside linux-block tree as dependencies of the patch
which will follow this merge.
Specifically, we need:
block: fix race between set_blocksize and read paths
block: hoist block size validation code to a separate function
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Pull block fixes from Jens Axboe:
- Fix autoloading of drivers from stat*(2)
- Fix losing read-ahead setting one suspend/resume, when a device is
re-probed.
- Fix race between setting the block size and page cache updates.
Includes a helper that a coming XFS fix will use as well.
- ublk cancelation fixes.
- ublk selftest additions and fixes.
- NVMe pull via Christoph:
- fix an out-of-bounds access in nvmet_enable_port (Richard
Weinberger)
* tag 'block-6.15-20250424' of git://git.kernel.dk/linux:
ublk: fix race between io_uring_cmd_complete_in_task and ublk_cancel_cmd
ublk: call ublk_dispatch_req() for handling UBLK_U_IO_NEED_GET_DATA
block: don't autoload drivers on blk-cgroup configuration
block: don't autoload drivers on stat
block: remove the backing_inode variable in bdev_statx
block: move blkdev_{get,put} _no_open prototypes out of blkdev.h
block: never reduce ra_pages in blk_apply_bdi_limits
selftests: ublk: common: fix _get_disk_dev_t for pre-9.0 coreutils
selftests: ublk: remove useless 'delay_us' from 'struct dev_ctx'
selftests: ublk: fix recover test
block: hoist block size validation code to a separate function
block: fix race between set_blocksize and read paths
nvmet: fix out-of-bounds access in nvmet_enable_port
Merge 6.15 block fixes - both to get the fixes causing issues with
XFS testing, but also to make it easier for 6.16 ublk patches to avoid
conflicts.
* block-6.15:
ublk: fix race between io_uring_cmd_complete_in_task and ublk_cancel_cmd
ublk: call ublk_dispatch_req() for handling UBLK_U_IO_NEED_GET_DATA
block: don't autoload drivers on blk-cgroup configuration
block: don't autoload drivers on stat
block: remove the backing_inode variable in bdev_statx
block: move blkdev_{get,put} _no_open prototypes out of blkdev.h
block: never reduce ra_pages in blk_apply_bdi_limits
selftests: ublk: common: fix _get_disk_dev_t for pre-9.0 coreutils
selftests: ublk: remove useless 'delay_us' from 'struct dev_ctx'
selftests: ublk: fix recover test
block: hoist block size validation code to a separate function
block: fix race between set_blocksize and read paths
nvmet: fix out-of-bounds access in nvmet_enable_port
