Think SMC_WR_BUF_CNT_SEND := SMC_WR_BUF_CNT used in send context and
SMC_WR_BUF_CNT_RECV := 3 * SMC_WR_BUF_CNT used in recv context. Those
get replaced with lgr->max_send_wr and lgr->max_recv_wr respective.
Please note that although with the default sysctl values
qp_attr.cap.max_send_wr == qp_attr.cap.max_recv_wr is maintained but
can not be assumed to be generally true any more. I see no downside to
that, but my confidence level is rather modest.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Sidraya Jayagond <sidraya@linux.ibm.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Tested-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Link: https://patch.msgid.link/20251027224856.2970019-2-pasic@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add the ability to append the incoming IP interface information to
ICMPv6 error messages in accordance with RFC 5837 and RFC 4884. This is
required for more meaningful traceroute results in unnumbered networks.
The feature is disabled by default and controlled via a new sysctl
("net.ipv6.icmp.errors_extension_mask") which accepts a bitmask of ICMP
extensions to append to ICMP error messages. Currently, only a single
value is supported, but the interface and the implementation should be
able to support more extensions, if needed.
Clone the skb and copy the relevant data portions before modifying the
skb as the caller of icmp6_send() still owns the skb after the function
returns. This should be fine since by default ICMP error messages are
rate limited to 1000 per second and no more than 1 per second per
specific host.
Trim or pad the packet to 128 bytes before appending the ICMP extension
structure in order to be compatible with legacy applications that assume
that the ICMP extension structure always starts at this offset (the
minimum length specified by RFC 4884).
Since commit 20e1954fe2 ("ipv6: RFC 4884 partial support for SIT/GRE
tunnels") it is possible for icmp6_send() to be called with an skb that
already contains ICMP extensions. This can happen when we receive an
ICMPv4 message with extensions from a tunnel and translate it to an
ICMPv6 message towards an IPv6 host in the overlay network. I could not
find an RFC that supports this behavior, but it makes sense to not
overwrite the original extensions that were appended to the packet.
Therefore, avoid appending extensions if the length field in the
provided ICMPv6 header is already filled.
Export netdev_copy_name() using EXPORT_IPV6_MOD_GPL() to make it
available to IPv6 when it is built as a module.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251027082232.232571-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the ability to append the incoming IP interface information to
ICMPv4 error messages in accordance with RFC 5837 and RFC 4884. This is
required for more meaningful traceroute results in unnumbered networks.
The feature is disabled by default and controlled via a new sysctl
("net.ipv4.icmp_errors_extension_mask") which accepts a bitmask of ICMP
extensions to append to ICMP error messages. Currently, only a single
value is supported, but the interface and the implementation should be
able to support more extensions, if needed.
Clone the skb and copy the relevant data portions before modifying the
skb as the caller of __icmp_send() still owns the skb after the function
returns. This should be fine since by default ICMP error messages are
rate limited to 1000 per second and no more than 1 per second per
specific host.
Trim or pad the packet to 128 bytes before appending the ICMP extension
structure in order to be compatible with legacy applications that assume
that the ICMP extension structure always starts at this offset (the
minimum length specified by RFC 4884).
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251027082232.232571-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The DWMAC1000 supports 2 timestamping configurations to configure how
frequency adjustments are made to the ptp_clock, as well as the reported
timestamp values.
There was a previous attempt at upstreaming support for configuring this
mode by Olivier Dautricourt and Julien Beraud a few years back [1]
In a nutshell, the timestamping can be either set in fine mode or in
coarse mode.
In fine mode, which is the default, we use the overflow of an accumulator to
trigger frequency adjustments, but by doing so we lose precision on the
timetamps that are produced by the timestamping unit. The main drawback
is that the sub-second increment value, used to generate timestamps, can't be
set to lower than (2 / ptp_clock_freq).
The "fine" qualification comes from the frequent frequency adjustments we are
able to do, which is perfect for a PTP follower usecase.
In Coarse mode, we don't do frequency adjustments based on an
accumulator overflow. We can therefore have very fine subsecond
increment values, allowing for better timestamping precision. However
this mode works best when the ptp clock frequency is adjusted based on
an external signal, such as a PPS input produced by a GPS clock. This
mode is therefore perfect for a Grand-master usecase.
Introduce a driver-specific devlink parameter "ts_coarse" to enable or
disable coarse mode, keeping the "fine" mode as a default.
This can then be changed with:
devlink dev param set <dev> name ts_coarse value true cmode runtime
The associated documentation is also added.
[1] : https://lore.kernel.org/netdev/20200514102808.31163-1-olivier.dautricourt@orolia.com/
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20251024070720.71174-3-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The dpll.yaml spec incorrectly omitted module-name and clock-id from the
pin-get operation reply specification, even though the kernel DPLL
implementation has always included these attributes in pin-get responses
since the initial implementation.
This spec inconsistency caused issues with the C YNL code generator.
The generated dpll_pin_get_rsp structure was missing these fields.
Fix the spec by adding module-name and clock-id to the pin-attrs reply
specification to match the actual kernel behavior.
Fixes: 3badff3a25 ("dpll: spec: Add Netlink spec in YAML")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20251024185512.363376-1-poros@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During a handshake, an endpoint may specify a maximum record size limit.
Currently, the kernel defaults to TLS_MAX_PAYLOAD_SIZE (16KB) for the
maximum record size. Meaning that, the outgoing records from the kernel
can exceed a lower size negotiated during the handshake. In such a case,
the TLS endpoint must send a fatal "record_overflow" alert [1], and
thus the record is discarded.
Upcoming Western Digital NVMe-TCP hardware controllers implement TLS
support. For these devices, supporting TLS record size negotiation is
necessary because the maximum TLS record size supported by the controller
is less than the default 16KB currently used by the kernel.
Currently, there is no way to inform the kernel of such a limit. This patch
adds support to a new setsockopt() option `TLS_TX_MAX_PAYLOAD_LEN` that
allows for setting the maximum plaintext fragment size. Once set, outgoing
records are no larger than the size specified. This option can be used to
specify the record size limit.
[1] https://www.rfc-editor.org/rfc/rfc8449
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20251022001937.20155-1-wilfred.opensource@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for reported issues.
Included in here are:
- sh-sci serial driver fixes
- 8250_dw and _mtk driver fixes
- sc16is7xx driver bugfix
- new 8250_exar device ids added
All of these have been in linux-next this past week with no reported
issues"
* tag 'tty-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_mtk: Enable baud clock and manage in runtime PM
serial: 8250_dw: handle reset control deassert error
dt-bindings: serial: sh-sci: Fix r8a78000 interrupts
serial: sc16is7xx: remove useless enable of enhanced features
serial: 8250_exar: add support for Advantech 2 port card with Device ID 0x0018
tty: serial: sh-sci: fix RSCI FIFO overrun handling
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 6.18-rc3.
Included in here are:
- new option serial driver device ids added
- dt bindings fixes for numerous platforms
- xhci bugfixes for many reported regressions
- usbio dependency bugfix
- dwc3 driver fix
- raw-gadget bugfix
All of these have been in linux-next this week with no reported issues"
* tag 'usb-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add Telit FN920C04 ECM compositions
USB: serial: option: add Quectel RG255C
tcpm: switch check for role_sw device with fw_node
usb/core/quirks: Add Huawei ME906S to wakeup quirk
usb: raw-gadget: do not limit transfer length
USB: serial: option: add UNISOC UIS7720
xhci: dbc: enable back DbC in resume if it was enabled before suspend
xhci: dbc: fix bogus 1024 byte prefix if ttyDBC read races with stall event
usb: xhci-pci: Fix USB2-only root hub registration
dt-bindings: usb: qcom,snps-dwc3: Fix bindings for X1E80100
usb: misc: Add x86 dependency for Intel USBIO driver
dt-bindings: usb: switch: split out ports definition
usb: dwc3: Don't call clk_bulk_disable_unprepare() twice
dt-bindings: usb: dwc3-imx8mp: dma-range is required only for imx8mp
Pull spi fixes from Mark Brown:
"A moderately large collection of device specific changes here, mostly
fixes but also including a few new quirks and device IDs. This is all
fairly routine even for the affected devices"
* tag 'spi-fix-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: dt-bindings: spi-rockchip: Add RK3506 compatible
spi: intel-pci: Add support for Intel Wildcat Lake SPI serial flash
spi: intel-pci: Add support for Arrow Lake-H SPI serial flash
spi: intel: Add support for 128M component density
spi: airoha: fix reading/writing of flashes with more than one plane per lun
spi: airoha: switch back to non-dma mode in the case of error
spi: airoha: add support of dual/quad wires spi modes to exec_op() handler
spi: airoha: return an error for continuous mode dirmap creation cases
spi: amlogic: fix spifc build error
spi: cadence-quadspi: Fix pm_runtime unbalance on dma EPROBE_DEFER
spi: spi-nxp-fspi: limit the clock rate for different sample clock source selection
spi: spi-nxp-fspi: add extra delay after dll locked
spi: spi-nxp-fspi: re-config the clock rate when operation require new clock rate
spi: dw-mmio: add error handling for reset_control_deassert()
spi: rockchip-sfc: Fix DMA-API usage
spi: dt-bindings: cadence: add soc-specific compatible strings for zynqmp and versal-net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can. Slim pickings, I'm guessing people haven't
really started testing.
Current release - new code bugs:
- eth: mlx5e:
- psp: avoid 'accel' NULL pointer dereference
- skip PPHCR register query for FEC histogram if not supported
Previous releases - regressions:
- bonding: update the slave array for broadcast mode
- rtnetlink: re-allow deleting FDB entries in user namespace
- eth: dpaa2: fix the pointer passed to PTR_ALIGN on Tx path
Previous releases - always broken:
- can: drop skb on xmit if device is in listen-only mode
- gro: clear skb_shinfo(skb)->hwtstamps in napi_reuse_skb()
- eth: mlx5e
- RX, fix generating skb from non-linear xdp_buff if program
trims frags
- make devcom init failures non-fatal, fix races with IPSec
Misc:
- some documentation formatting 'fixes'"
* tag 'net-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net/mlx5: Fix IPsec cleanup over MPV device
net/mlx5: Refactor devcom to return NULL on failure
net/mlx5e: Skip PPHCR register query if not supported by the device
net/mlx5: Add PPHCR to PCAM supported registers mask
virtio-net: zero unused hash fields
net: phy: micrel: always set shared->phydev for LAN8814
vsock: fix lock inversion in vsock_assign_transport()
ovpn: use datagram_poll_queue for socket readiness in TCP
espintcp: use datagram_poll_queue for socket readiness
net: datagram: introduce datagram_poll_queue for custom receive queues
net: bonding: fix possible peer notify event loss or dup issue
net: hsr: prevent creation of HSR device with slaves from another netns
sctp: avoid NULL dereference when chunk data buffer is missing
ptp: ocp: Fix typo using index 1 instead of i in SMA initialization loop
net: ravb: Ensure memory write completes before ringing TX doorbell
net: ravb: Enforce descriptor type ordering
net: hibmcge: select FIXED_PHY
net: dlink: use dev_kfree_skb_any instead of dev_kfree_skb
Documentation: networking: ax25: update the mailing list info.
net: gro_cells: fix lock imbalance in gro_cells_receive()
...
Pull SCSI fixes from James Bottomley:
"All driver fixes. The big change is the storvsc one to rejig the
hyper-v channel handling to be more efficient for SMP virtual
machines"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: phy: dt-bindings: Add QMP UFS PHY compatible for Kaanapali
scsi: ufs: qcom: dt-bindings: Document the Kaanapali UFS controller
scsi: libfc: Prevent integer overflow in fc_fcp_recv_data()
scsi: qla4xxx: Fix typos in comments
scsi: storvsc: Prefer returning channel with the same CPU as on the I/O issuing CPU
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-10-17
The first patch is by me and adds support for an optional reset to the
m_can drivers.
Vincent Mailhol's patch targets all drivers and removes the
can_change_mtu() function, since the netdev's min and max MTU are
populated.
Markus Schneider-Pargmann contributes 4 patches to the m_can driver to
add am62 wakeup support.
The last 7 patches are by me and provide various cleanups to the m_can
driver.
* tag 'linux-can-next-for-6.19-20251017' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: m_can: m_can_get_berr_counter(): don't wake up controller if interface is down
can: m_can: m_can_tx_submit(): remove unneeded sanity checks
can: m_can: m_can_class_register(): remove error message in case devm_kzalloc() fails
can: m_can: m_can_interrupt_enable(): use m_can_write() instead of open coding it
net: m_can: convert dev_{dbg,info,err} -> netdev_{dbg,info,err}
can: m_can: hrtimer_callback(): rename to m_can_polling_timer()
can: m_can: m_can_init_ram(): make static
can: m_can: Support pinctrl wakeup state
can: m_can: Return ERR_PTR on error in allocation
can: m_can: Map WoL to device_set_wakeup_enable
dt-bindings: can: m_can: Add wakeup properties
can: treewide: remove can_change_mtu()
can: m_can: add support for optional reset
====================
Link: https://patch.msgid.link/20251017150819.1415685-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull rustfmt fixes from Miguel Ojeda:
"Rust 'rustfmt' cleanup
'rustfmt', by default, formats imports in a way that is prone to
conflicts while merging and rebasing, since in some cases it condenses
several items into the same line.
Document in our guidelines that we will handle this for the moment
with the trailing empty comment workaround and make the tree
'rustfmt'-clean again"
* tag 'rust-rustfmt' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: bitmap: fix formatting
rust: cpufreq: fix formatting
rust: alloc: employ a trailing comment to keep vertical layout
docs: rust: add section on imports formatting
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix the handling of ZCR_EL2 in NV VMs
- Pick the correct translation regime when doing a PTW on the back of
a SEA
- Prevent userspace from injecting an event into a vcpu that isn't
initialised yet
- Move timer save/restore to the sysreg handling code, fixing EL2
timer access in the process
- Add FGT-based trapping of MDSCR_EL1 to reduce the overhead of debug
- Fix trapping configuration when the host isn't GICv3
- Improve the detection of HCR_EL2.E2H being RES1
- Drop a spurious 'break' statement in the S1 PTW
- Don't try to access SPE when owned by EL3
Documentation updates:
- Document the failure modes of event injection
- Document that a GICv3 guest can be created on a GICv5 host with
FEAT_GCIE_LEGACY
Selftest improvements:
- Add a selftest for the effective value of HCR_EL2.AMO
- Address build warning in the timer selftest when building with
clang
- Teach irqfd selftests about non-x86 architectures
- Add missing sysregs to the set_id_regs selftest
- Fix vcpu allocation in the vgic_lpi_stress selftest
- Correctly enable interrupts in the vgic_lpi_stress selftest
x86:
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test
for the bug fixed by commit 3ccbf6f470 ("KVM: x86/mmu: Return
-EAGAIN if userspace deletes/moves memslot during prefault")
- Don't try to get PMU capabilities from perf when running a CPU with
hybrid CPUs/PMUs, as perf will rightly WARN.
guest_memfd:
- Rework KVM_CAP_GUEST_MEMFD_MMAP (newly introduced in 6.18) into a
more generic KVM_CAP_GUEST_MEMFD_FLAGS
- Add a guest_memfd INIT_SHARED flag and require userspace to
explicitly set said flag to initialize memory as SHARED,
irrespective of MMAP.
The behavior merged in 6.18 is that enabling mmap() implicitly
initializes memory as SHARED, which would result in an ABI
collision for x86 CoCo VMs as their memory is currently always
initialized PRIVATE.
- Allow mmap() on guest_memfd for x86 CoCo VMs, i.e. on VMs with
private memory, to enable testing such setups, i.e. to hopefully
flush out any other lurking ABI issues before 6.18 is officially
released.
- Add testcases to the guest_memfd selftest to cover guest_memfd
without MMAP, and host userspace accesses to mmap()'d private
memory"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (46 commits)
arm64: Revamp HCR_EL2.E2H RES1 detection
KVM: arm64: nv: Use FGT write trap of MDSCR_EL1 when available
KVM: arm64: Compute per-vCPU FGTs at vcpu_load()
KVM: arm64: selftests: Fix misleading comment about virtual timer encoding
KVM: arm64: selftests: Add an E2H=0-specific configuration to get_reg_list
KVM: arm64: selftests: Make dependencies on VHE-specific registers explicit
KVM: arm64: Kill leftovers of ad-hoc timer userspace access
KVM: arm64: Fix WFxT handling of nested virt
KVM: arm64: Move CNT*CT_EL0 userspace accessors to generic infrastructure
KVM: arm64: Move CNT*_CVAL_EL0 userspace accessors to generic infrastructure
KVM: arm64: Move CNT*_CTL_EL0 userspace accessors to generic infrastructure
KVM: arm64: Add timer UAPI workaround to sysreg infrastructure
KVM: arm64: Make timer_set_offset() generally accessible
KVM: arm64: Replace timer context vcpu pointer with timer_id
KVM: arm64: Introduce timer_context_to_vcpu() helper
KVM: arm64: Hide CNTHV_*_EL2 from userspace for nVHE guests
Documentation: KVM: Update GICv3 docs for GICv5 hosts
KVM: arm64: gic-v3: Only set ICH_HCR traps for v2-on-v3 or v3 guests
KVM: arm64: selftests: Actually enable IRQs in vgic_lpi_stress
KVM: arm64: selftests: Allocate vcpus with correct size
...
KVM x86 fixes for 6.18:
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test for the
bug fixed by commit 3ccbf6f470 ("KVM: x86/mmu: Return -EAGAIN if userspace
deletes/moves memslot during prefault")
- Don't try to get PMU capabbilities from perf when running a CPU with hybrid
CPUs/PMUs, as perf will rightly WARN.
- Rework KVM_CAP_GUEST_MEMFD_MMAP (newly introduced in 6.18) into a more
generic KVM_CAP_GUEST_MEMFD_FLAGS
- Add a guest_memfd INIT_SHARED flag and require userspace to explicitly set
said flag to initialize memory as SHARED, irrespective of MMAP. The
behavior merged in 6.18 is that enabling mmap() implicitly initializes
memory as SHARED, which would result in an ABI collision for x86 CoCo VMs
as their memory is currently always initialized PRIVATE.
- Allow mmap() on guest_memfd for x86 CoCo VMs, i.e. on VMs with private
memory, to enable testing such setups, i.e. to hopefully flush out any
other lurking ABI issues before 6.18 is officially released.
- Add testcases to the guest_memfd selftest to cover guest_memfd without MMAP,
and host userspace accesses to mmap()'d private memory.
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-10-16
We've added 6 non-merge commits during the last 1 day(s) which contain
a total of 18 files changed, 577 insertions(+), 38 deletions(-).
The main changes are:
1) Bypass the global per-protocol memory accounting either by setting
a netns sysctl or using bpf_setsockopt in a bpf program,
from Kuniyuki Iwashima.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Add test for sk->sk_bypass_prot_mem.
bpf: Introduce SK_BPF_BYPASS_PROT_MEM.
bpf: Support bpf_setsockopt() for BPF_CGROUP_INET_SOCK_CREATE.
net: Introduce net.core.bypass_prot_mem sysctl.
net: Allow opt-out from global protocol memory accounting.
tcp: Save lock_sock() for memcg in inet_csk_accept().
====================
Link: https://patch.msgid.link/20251016204539.773707-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In {tcp6,udp6,raw6}_sock, struct ipv6_pinfo is always placed at
the beginning of a new cache line because
1. __alignof__(struct tcp_sock) is 64 due to ____cacheline_aligned
of __cacheline_group_begin(tcp_sock_write_tx)
2. __alignof__(struct udp_sock) is 64 due to ____cacheline_aligned
of struct numa_drop_counters
3. in raw6_sock, struct numa_drop_counters is placed before
struct ipv6_pinfo
. struct ipv6_pinfo is 136 bytes, but the last cache line is
only used by ipv6_fl_list:
$ pahole -C ipv6_pinfo vmlinux
struct ipv6_pinfo {
...
/* --- cacheline 2 boundary (128 bytes) --- */
struct ipv6_fl_socklist * ipv6_fl_list; /* 128 8 */
/* size: 136, cachelines: 3, members: 23 */
Let's move ipv6_fl_list from struct ipv6_pinfo to struct inet_sock
to save a full cache line for {tcp6,udp6,raw6}_sock.
Now, struct ipv6_pinfo is 128 bytes, and {tcp6,udp6,raw6}_sock have
64 bytes less, while {tcp,udp,raw}_sock retain the same size.
Before:
# grep -E "^(RAW|UDP[^L\-]|TCP)" /proc/slabinfo | awk '{print $1, "\t", $4}'
RAWv6 1408
UDPv6 1472
TCPv6 2560
RAW 1152
UDP 1280
TCP 2368
After:
# grep -E "^(RAW|UDP[^L\-]|TCP)" /proc/slabinfo | awk '{print $1, "\t", $4}'
RAWv6 1344
UDPv6 1408
TCPv6 2496
RAW 1152
UDP 1280
TCP 2368
Also, ipv6_fl_list and inet_flags (SNDFLOW bit) are placed in the
same cache line.
$ pahole -C inet_sock vmlinux
...
/* --- cacheline 11 boundary (704 bytes) was 56 bytes ago --- */
struct ipv6_pinfo * pinet6; /* 760 8 */
/* --- cacheline 12 boundary (768 bytes) --- */
struct ipv6_fl_socklist * ipv6_fl_list; /* 768 8 */
unsigned long inet_flags; /* 776 8 */
Doc churn is due to the insufficient Type column (only 1 space short).
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251014224210.2964778-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. All changes are rather boring
device-specific fixes and quirks:
- A few fixes for missing NULL checks
- ASoC NAU8821 fixes for jack and irq handling
- Various fixes for ASoC TAS2781, IDT821034, sc8280xp, max9809x,
wcd938x, and SoundWire
- Usual HD-audio and USB-audio quirks"
* tag 'sound-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (27 commits)
ALSA: hda/realtek: Fix mute led for HP Omen 17-cb0xxx
ALSA: usb-audio: fix vendor quirk for Logitech H390
ALSA: usb-audio: add volume quirks for MS LifeChat LX-3000
ASoC: amd/sdw_utils: avoid NULL deref when devm_kasprintf() fails
ASoC: max98090/91: fixed max98091 ALSA widget powering up/down
ASoC: dt-bindings: Add compatible string fsl,imx-audio-tlv320
ASoC: codecs: wcd938x-sdw: remove redundant runtime pm calls
ASoC: sdw_utils: add rt1321 part id to codec_info_list
ALSA: usb-audio: Fix NULL pointer deference in try_to_register_card
ALSA: firewire: amdtp-stream: fix enum kernel-doc warnings
ALSA: usb-audio: add mixer_playback_min_mute quirk for Logitech H390
ASoC: nau8821: Avoid unnecessary blocking in IRQ handler
ASoC: nau8821: Add DMI quirk to bypass jack debounce circuit
ASoC: nau8821: Consistently clear interrupts before unmasking
ASoC: nau8821: Generalize helper to clear IRQ status
ASoC: nau8821: Cancel jdet_work before handling jack ejection
ASoC: codecs: Fix gain setting ranges for Renesas IDT821034 codec
ASoC: tas2781: Update ti,tas2781.yaml for adding tas58xx
ASoC: tas2781: Support more newly-released amplifiers tas58xx in the driver
ASoC: qcom: sc8280xp: Add support for QCS615
...
Pull i2c fixes from Wolfram Sang:
- PM cleanup after all prerequisites are merged with rc1
- usbio: missing addition after all dependencies are in
- slimpro: DT binding schema conversion
* tag 'i2c-for-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
dt-bindings: i2c: Convert apm,xgene-slimpro-i2c to DT schema
i2c: usbio: Add ACPI device-id for MTL-CVF devices
i2c: Remove redundant pm_runtime_mark_last_busy() calls
The pins associated with m_can have to have a special configuration to
be able to wakeup the SoC from some system states. This configuration is
described in the wakeup pinctrl state while the default state describes
the default configuration. Also add the sleep state which is already in
use by some devicetrees.
Also m_can can be a wakeup-source if capable of wakeup.
Signed-off-by: Markus Schneider-Pargmann (TI.com) <msp@baylibre.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251001-topic-mcan-wakeup-source-v6-12-v10-1-4ab508ac5d1e@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
`rustfmt`, by default, formats imports in a way that is prone to conflicts
while merging and rebasing, since in some cases it condenses several
items into the same line.
For instance, Linus mentioned [1] that the following case:
use crate::{
fmt,
page::AsPageIter,
};
is compressed by `rustfmt` into:
use crate::{fmt, page::AsPageIter};
which is undesirable.
Similarly, `rustfmt` may put several items in the same line even if the
braces span already multiple lines, e.g.:
use kernel::{
acpi, c_str,
device::{property, Core},
of, platform,
};
The options that control the formatting behavior around imports are
generally unstable, and `rustfmt` releases do not allow to use nightly
features, unlike the compiler and other Rust tooling [2].
For the moment, we can introduce a workaround to prevent `rustfmt`
from compressing the example above -- the "trailing empty comment":
use crate::{
fmt,
page::AsPageIter, //
};
which is reminiscent of the trailing comma behavior in other formatters.
We already used empty comments for formatting purposes in the past,
e.g. in commit b9b701fce4 ("rust: clarify the language unstable features
in use").
In addition, `rustfmt` actually reformats with a vertical layout (i.e. it
does not put two items in the same line) when seeing such a comment,
i.e. it doesn't just preserve the formatting, which is good in the sense
that we can use it to easily reformat some imports, since it matches
the style we generally want to have.
A Git merge driver would help (suggested by Gary and Wedson), though
maintainers would need to set it up, the diffs would still be larger
and the formatting rules for imports would remain hard to predict.
Thus document the style that we will follow in the coding guidelines
by introducing a new section and explain how the trailing empty comment
works there too.
We discussed the issue with upstream Rust in our usual Rust <-> Rust
for Linux meeting [3], and there have also been a few other discussions
in parallel in issues [4][5] and Zulip [6]. We will see what happens,
but upstream Rust has already created a subteam of `rustfmt` to try
to overcome the bandwidth issue [7], which is a good signal, and some
organization work has already started (e.g. tracking issues). We will
continue our discussions with them about it.
Cc: Caleb Cartwright <caleb.cartwright@outlook.com>
Cc: Yacin Tmimi <yacintmimi@gmail.com>
Cc: Manish Goregaokar <manishsmail@gmail.com>
Cc: Deadbeef <ent3rm4n@gmail.com>
Cc: Cameron Steffen <cam.steffen94@gmail.com>
Cc: Jieyou Xu <jieyouxu@outlook.com>
Link: https://lore.kernel.org/all/CAHk-=wgO7S_FZUSBbngG5vtejWOpzDfTTBkVvP3_yjJmFddbzA@mail.gmail.com/ [1]
Link: https://github.com/rust-lang/rustfmt/issues/4884 [2]
Link: https://hackmd.io/iSCyY3JTTz-g8YM-nnzTTA [3]
Link: https://github.com/rust-lang/rustfmt/issues/4991 [4]
Link: https://github.com/rust-lang/rustfmt/issues/3361 [5]
Link: https://rust-lang.zulipchat.com/#narrow/channel/392734-council/topic/rustfmt.20maintenance/near/543815381 [6]
Link: https://github.com/rust-lang/team/pull/2017 [7]
Reviewed-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
If a socket has sk->sk_bypass_prot_mem flagged, the socket opts out
of the global protocol memory accounting.
Let's control the flag by a new sysctl knob.
The flag is written once during socket(2) and is inherited to child
sockets.
Tested with a script that creates local socket pairs and send()s a
bunch of data without recv()ing.
Setup:
# mkdir /sys/fs/cgroup/test
# echo $$ >> /sys/fs/cgroup/test/cgroup.procs
# sysctl -q net.ipv4.tcp_mem="1000 1000 1000"
# ulimit -n 524288
Without net.core.bypass_prot_mem, charged to tcp_mem & memcg
# python3 pressure.py &
# cat /sys/fs/cgroup/test/memory.stat | grep sock
sock 22642688 <-------------------------------------- charged to memcg
# cat /proc/net/sockstat| grep TCP
TCP: inuse 2006 orphan 0 tw 0 alloc 2008 mem 5376 <-- charged to tcp_mem
# ss -tn | head -n 5
State Recv-Q Send-Q Local Address:Port Peer Address:Port
ESTAB 2000 0 127.0.0.1:34479 127.0.0.1:53188
ESTAB 2000 0 127.0.0.1:34479 127.0.0.1:49972
ESTAB 2000 0 127.0.0.1:34479 127.0.0.1:53868
ESTAB 2000 0 127.0.0.1:34479 127.0.0.1:53554
# nstat | grep Pressure || echo no pressure
TcpExtTCPMemoryPressures 1 0.0
With net.core.bypass_prot_mem=1, charged to memcg only:
# sysctl -q net.core.bypass_prot_mem=1
# python3 pressure.py &
# cat /sys/fs/cgroup/test/memory.stat | grep sock
sock 2757468160 <------------------------------------ charged to memcg
# cat /proc/net/sockstat | grep TCP
TCP: inuse 2006 orphan 0 tw 0 alloc 2008 mem 0 <- NOT charged to tcp_mem
# ss -tn | head -n 5
State Recv-Q Send-Q Local Address:Port Peer Address:Port
ESTAB 111000 0 127.0.0.1:36019 127.0.0.1:49026
ESTAB 110000 0 127.0.0.1:36019 127.0.0.1:45630
ESTAB 110000 0 127.0.0.1:36019 127.0.0.1:44870
ESTAB 111000 0 127.0.0.1:36019 127.0.0.1:45274
# nstat | grep Pressure || echo no pressure
no pressure
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Link: https://patch.msgid.link/20251014235604.3057003-4-kuniyu@google.com
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN
Current release - regressions:
- udp: do not use skb_release_head_state() before
skb_attempt_defer_free()
- gro_cells: use nested-BH locking for gro_cell
- dpll: zl3073x: increase maximum size of flash utility
Previous releases - regressions:
- core: fix lockdep splat on device unregister
- tcp: fix tcp_tso_should_defer() vs large RTT
- tls:
- don't rely on tx_work during send()
- wait for pending async decryptions if tls_strp_msg_hold fails
- can: j1939: add missing calls in NETDEV_UNREGISTER notification
handler
- eth: lan78xx: fix lost EEPROM write timeout in
lan78xx_write_raw_eeprom
Previous releases - always broken:
- ip6_tunnel: prevent perpetual tunnel growth
- dpll: zl3073x: handle missing or corrupted flash configuration
- can: m_can: fix pm_runtime and CAN state handling
- eth:
- ixgbe: fix too early devlink_free() in ixgbe_remove()
- ixgbevf: fix mailbox API compatibility
- gve: Check valid ts bit on RX descriptor before hw timestamping
- idpf: cleanup remaining SKBs in PTP flows
- r8169: fix packet truncation after S4 resume on RTL8168H/RTL8111H"
* tag 'net-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
udp: do not use skb_release_head_state() before skb_attempt_defer_free()
net: usb: lan78xx: fix use of improperly initialized dev->chipid in lan78xx_reset
netdevsim: set the carrier when the device goes up
selftests: tls: add test for short splice due to full skmsg
selftests: net: tls: add tests for cmsg vs MSG_MORE
tls: don't rely on tx_work during send()
tls: wait for pending async decryptions if tls_strp_msg_hold fails
tls: always set record_type in tls_process_cmsg
tls: wait for async encrypt in case of error during latter iterations of sendmsg
tls: trim encrypted message to match the plaintext on short splice
tg3: prevent use of uninitialized remote_adv and local_adv variables
MAINTAINERS: new entry for IPv6 IOAM
gve: Check valid ts bit on RX descriptor before hw timestamping
net: core: fix lockdep splat on device unregister
MAINTAINERS: add myself as maintainer for b53
selftests: net: check jq command is supported
net: airoha: Take into account out-of-order tx completions in airoha_dev_xmit()
tcp: fix tcp_tso_should_defer() vs large RTT
r8152: add error handling in rtl8152_driver_init
usbnet: Fix using smp_processor_id() in preemptible code warnings
...
Merge series from Le Qi <le.qi@oss.qualcomm.com>:
This patch series adds support for the QCS615 sound card:
- Updates device tree bindings for SM8250 to include QCS615.
- Adds QCS615 support in the SC8280XP ASoC driver.
