Register fans connected under EC as thermal cooling devices as well, so
these fans can then work with the thermal framework.
During the driver probing phase, we will also try to register each fan
as a thermal cooling device based on previous probe result (whether the
there are fans connected on that channel, and whether EC supports fan
control). The basic get max state, get current state, and set current
state methods are then implemented as well.
Signed-off-by: Sung-Chi Li <lschyi@chromium.org>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250911-cros_ec_fan-v6-3-a1446cc098af@google.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Newer EC firmware supports controlling fans through host commands, so
adding corresponding implementations for controlling these fans in the
driver for other kernel services and userspace to control them.
The driver will first probe the supported host command versions (get and
set of fan PWM values, get and set of fan control mode) to see if the
connected EC fulfills the requirements of controlling the fan, then
exposes corresponding sysfs nodes for userspace to control the fan with
corresponding read and write implementations.
As EC will automatically change the fan mode to auto when the device is
suspended, the power management hooks are added as well to keep the fan
control mode and fan PWM value consistent during suspend and resume. As
we need to access the hwmon device in the power management hook, update
the driver by storing the hwmon device in the driver data as well.
Signed-off-by: Sung-Chi Li <lschyi@chromium.org>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250911-cros_ec_fan-v6-2-a1446cc098af@google.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Many machines treat fan state 3 as some sort of automatic mode,
which is superior to the separate SMM calls for switching to
automatic fan mode for two reasons:
- the fan control mode can be controlled for each fan separately
- the current fan control mode can be retrieved from the BIOS
On some machines however, this special fan state does not exist.
Fan state 3 acts like a regular fan state on such machines or
does not exist at all. Such machines usually use separate SMM calls
for enabling/disabling automatic fan control.
Add support for it. If the machine supports separate SMM calls
for changing the fan control mode, then the other interface is
ignored.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250917181036.10972-4-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Implement locking in the hardware monitoring core for drivers using
the _with_info() API functions.
Most hardware monitoring drivers need to support locking to protect
against parallel accesses from userspace. With older API functions, such
locking had to be implemented in the driver code since sysfs attributes
were created by the driver. However, the _with_info() API creates sysfs
attributes in the hardware monitoring core. This makes it easy to move
the locking primitives into that code. This has the benefit of simplifying
driver code while at the same time reducing the risk of incomplete of bad
locking implementations in hardware monitoring drivers.
While this means that all accesses are forced to be synchronized, this
has little if any practical impact since accesses are expected to be low
frequency and are typically synchronized from userspace anyway since
only a single process is accessing the data. On top of that, many drivers
use regmap, which also has its own locking scheme and already serializes
accesses.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
INA700 is register compatible to INA780 but has different current, power,
and energy LSB values.
While the chip does not directly report the shunt voltage, report
it anyway by calculating its value from the current register.
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # INA780
Cc: Christian Kahr <christian.kahr@sie.at>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
INA780 is similar to the other chips in the series, but does not
support the shunt voltage register. Shunt voltage limit registers
have been renamed to current limit registers, but are otherwise
identical.
While the chip does not directly report the shunt voltage, report
it anyway by calculating its value from the current register.
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # INA780
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Since the shunt voltage register and the current register now report the
same values, use the shunt voltage limit registers to report and adjust
current limits, using the same LSB as the LSB used for the actual current
register.
Handle current register accuracy differences in separate function to
improve code readability.
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # INA780
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
There are no in-tree users of ina2xx platform data. Drop
support for it. The driver already supports device properties
which can be used as alternative if needed.
Also remove reference to the non-existing shunt_resistor sysfs
attribute from the driver documentation.
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # INA780
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Many chips require 64-bit variables to display the accumulated energy,
even more so since the energy units are micro-Joule. Add new sensor type
"energy64" to support reporting the chip energy as 64-bit values.
Changing the entire hardware monitoring API is not feasible, and it is only
really necessary to support reading 64-bit values for the "energyX_input"
attribute. For this reason, keep the API as-is and use type casts on both
ends to pass 64-bit pointers when reading the accumulated energy. On the
write side (which is only useful for the energyX_enable attribute), keep
passing the written value as long.
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # INA780
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Pull hwmon updates from Guenter Roeck:
"Updated chip support in existing drivers:
- ina238: Support for INA228
- pmbus/tps53679: Support for TPS53685
- pmbus/adp1050: Support for adp1051, adp1055 and ltp8800
- corsair-psu: Support for HX1200i Series 2025
- pmbus/isl68137: Support for RAA229621
- asus-ec-sensors: Support for ProArt X870E-CREATOR WIFI and
Other notable changes:
- adt7475: Support for #pwm-cells = <3>
- amc6821: Cooling device support
- emc2305: Support for PWM frequency, polarity and output
- Add missing compatible entries to various devicetree bindings
And various other minor fixes and improvements"
* tag 'hwmon-for-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (34 commits)
dt-bindings: hwmon: Replace bouncing Alexandru Tachici emails
hwmon: (ina238) Add support for INA228
dt-bindings: Add INA228 to ina2xx devicetree bindings
hwmon: (ina238) Fix inconsistent whitespace
dt-bindings: hwmon: adt7475: Allow and recommend #pwm-cells = <3>
hwmon: (adt7475) Implement support for #pwm-cells = <3>
hwmon: (pmbus/tps53679) Add support for TPS53685
dt-bindings: trivial: Add tps53685 support
hwmon: (pmbus/adp1050) Add regulator support for ltp8800
hwmon: (pmbus/adp1050) Add support for adp1051, adp1055 and ltp8800
dt-bindings: hwmon: pmbus/adp1050: Add adp1051, adp1055 and ltp8800
hwmon: (max31827) use sysfs_emit() in temp1_resolution_show()
hwmon: (ltc4282) convert from round_rate() to determine_rate()
hwmon: (corsair-psu) add support for HX1200i Series 2025
dt-bindings: hwmon: pmbus: ti,ucd90320: Add missing compatibles
dt-bindings: hwmon: maxim,max20730: Add maxim,max20710 compatible
dt-bindings: hwmon: lltc,ltc2978: Add lltc,ltc713 compatible
dt-bindings: hwmon: ti,lm87: Add adi,adm1024 compatible
dt-bindings: hwmon: national,lm90: Add missing Dallas max6654 and onsemi nct72, nct214, and nct218
hwmon: (w83627ehf) make the read-only arrays 'bit' static const
...
Pull pwm updates from Uwe Kleine-König:
"Apart from the usual mix of new drivers (pwm-argon-fan-hat), adding
support for variants to existing drivers, minor improvements to both
drivers and docs, device tree documenation updates, the noteworthy
changes are:
- A hwmon companion driver to pwm-mc33xs2410 living in drivers/hwmon
and acked by Guenter Roeck
- chardev support for PWM devices. This leverages atomic PWM updates
to userspace and at the same time simplifies and accelerates PWM
configuration changes"
* tag 'pwm/for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (35 commits)
pwm: raspberrypi-poe: Fix spelling mistake "Firwmware" -> "Firmware"
hwmon: add support for MC33XS2410 hardware monitoring
pwm: mc33xs2410: add hwmon support
pwm: img: Remove redundant pm_runtime_mark_last_busy() calls
pwm: Expose PWM_WFHWSIZE in public header
dt-bindings: pwm: Convert lpc32xx-pwm.txt to yaml format
docs: pwm: Adapt Locking paragraph to reality
pwm: twl-led: Drop driver local locking
pwm: sun4i: Drop driver local locking
pwm: sti: Drop driver local locking
pwm: microchip-core: Drop driver local locking
pwm: lpc18xx-sct: Drop driver local locking
pwm: fsl-ftm: Drop driver local locking
pwm: clps711x: Drop driver local locking
pwm: atmel: Drop driver local locking
pwm: argon-fan-hat: Add Argon40 Fan HAT support
dt-bindings: pwm: argon40,fan-hat: Document Argon40 Fan HAT
dt-bindings: vendor-prefixes: Document Argon40
pwm: pwm-mediatek: Add support for PWM IP V3.0.2 in MT6991/MT8196
pwm: pwm-mediatek: Pass PWM_CK_26M_SEL from platform data
...
The TPS53685 is a fully AMD SVI3 compliant step down controller with
trans-inductor voltage regulator(TLVR) topology support, dual channels,
built-in non-volatile memory (NVM), PMBus interface, and full compatible
with TI NexFET smart power stages.
Add support for it to the tps53679 driver.
Signed-off-by: Chiang Brian <chiang.brian@inventec.com>
Link: https://lore.kernel.org/r/20250619064223.3165523-3-chiang.brian@inventec.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Introduce hardware monitoring support for the following devices:
ADP1051: 6 PWM for I/O Voltage, I/O Current, Temperature
ADP1055: 6 PWM for I/O Voltage, I/O Current, Power, Temperature
LTP8800-1A/-2/-4A: 150A/135A/200A DC/DC µModule Regulator
The ADP1051 and ADP1055 are similar digital controllers for high
efficiency DC-DC power conversion while the LTP8800 is a family of
step-down μModule regulators that provides microprocessor core voltage
from 54V power distribution architecture. All of the above components
features telemetry monitoring of input/output voltage, input current,
output power, and temperature over PMBus.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Co-developed-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Signed-off-by: Cedric Encarnacion <cedricjustine.encarnacion@analog.com>
Link: https://lore.kernel.org/r/20250709-adp1051-v5-2-539254692252@analog.com
[groeck: Dropped unnecessaary spaces after type casts]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Pull hwmon updates from Guenter Roeck:
"New drivers:
- KEBA fan controller
- KEBA battery monitoring controller
- MAX77705
Support added to existing drivers:
- MAXIMUS VI HERO and ROG MAXIMUS Z90 Formula support (asus-ec-sensors)
- SQ52206 support (ina238)
- lt3074 support (pmbus/lt3074)
- ADPM12160 support (pmbus/max34440)
- MPM82504 and for MPM3695 family support (pmbus/mpq8785)
- Add the Dell OptiPlex 7050 to the DMI whitelist (dell-smm)
- Zen5 Ryzen Desktop support (k10temp)
Various other minor fixes and improvements"
* tag 'hwmon-for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (48 commits)
doc: hwmon: acpi_power_meter: Add information about enabling the power capping feature.
hwmon: (isl28022) Fix current reading calculation
hwmon: (lm75) Fix I3C transfer buffer pointer for incoming data
hwmon: Add KEBA fan controller support
hwmon: pmbus: mpq8785: Add support for MPM3695 family
hwmon: pmbus: mpq8785: Add support for MPM82504
hwmon: pmbus: mpq8785: Implement VOUT feedback resistor divider ratio configuration
hwmon: pmbus: mpq8785: Prepare driver for multiple device support
dt-bindings: hwmon: Add bindings for mpq8785 driver
hwmon: (ina238) Modify the calculation formula to adapt to different chips
hwmon: (ina238) Add support for SQ52206
dt-bindings: Add SQ52206 to ina2xx devicetree bindings
hwmon: (ina238) Add ina238_config to save configurations for different chips
hwmon: (ausus-ec-sensors) add MAXIMUS VI HERO.
hwmon: (isl28022, nct7363) Convert to use maple tree register cache
hwmon: (asus-ec-sensors) check sensor index in read_string()
hwmon: (asus-ec-sensors) add ROG MAXIMUS Z90 Formula.
dt-bindings: hwmon: Add Sophgo SG2044 external hardware monitor support
hwmon: (max77705) Add initial support
hwmon: (tmp102) add vcc regulator support
...
To enable the power capping feature of the acpi_power_meter driver on
systems other than IBM products, you must explicitly specify
the force_cap_on module parameter.
Add information to the documentation about enabling the power capping
feature with this driver, including the above, to improve user convenience.
Signed-off-by: Shinji Nomoto <fj5851bi@fujitsu.com>
Link: https://lore.kernel.org/r/20250520062707.1657667-1-fj5851bi@fujitsu.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The KEBA fan controller is found in the system FPGA of KEBA PLC devices.
It detects if the fan is removed or blocked. For fans with tacho signal
the monitoring of the speed of the fan is supported. It also supports to
regulate the speed of fans with PWM input.
The auxiliary device for this driver is instantiated by the cp500 misc
driver.
Signed-off-by: Gerhard Engleder <eg@keba.com>
Link: https://lore.kernel.org/r/20250425194823.54664-1-gerhard@engleder-embedded.com
[groeck: Added various missing "break;" statements]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for the Monolithic Power Systems MPM3695 family.
It contains four devices with suffixes: -10, -20, -25 and -100.
The device is PMBus compliant and shares characteristics with the
MPM82504.
MPM3695-25 has different VOLTAGE_SCALE_LOOP register size [11:0]
and therefore needs to have a separate compatible entry.
Tested with device tree based matching (MPM3695-10).
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://lore.kernel.org/r/20250511035701.2607947-6-paweldembicki@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
