The "apm,xgene-ahci-v2" compatible has been in use for a long time, but
was undocumented. It doesn't require clocks or phys.
Remove the "apm,xgene-ahci-pcie" compatible which isn't used anywhere
while we're here.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The 'target-supply' property is used by some i.MX devicetree files.
Document it to fix the following dt-schema warning:
'target-supply' does not match any of the regexes: '^pinctrl-[0-9]+$'
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Convert the Arasan/SPEAr Compact Flash Controller to DT schema format.
The "clock-frequency" property isn't actually used. Add a single
"clocks" entry as the Linux driver supports a single clock though the
platform still doesn't have clocks in DT.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Convert the Marvell Orion SATA Controller to DT schema format.
The clocks and clock-names properties were missing. The names for
phy-names were incorrect. The maximum "nr-ports" was determined from the
Linux driver.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Convert the Cavium Compact Flash Controller to DT schema format. It's a
straight-forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Convert the APM X-Gene AHCI SATA Controller to DT schema format. It's a
straight-forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Convert the ST AHCI SATA Controller to DT schema format.
The phy-names changes from "ahci_phy" to "sata-phy" with the inclusion
of ahci-common.yaml. That's an ABI change, but the Linux driver at least
ignores the names. The binding uses "ports-implemented" property, so
including ahci-common.yaml is required.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Convert the TI DM816 AHCI SATA Controller to DT schema format. It's a
straight-forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Pull SoC devicetree updates from Arnd Bergmann:
"There is new support for additional on-chip devices on Apple,
Mediatek, Renesas, Rockchip, Samsung, Google, TI, ST, Nvidia and
Amlogic devices.
The Arm Morello reference platform gets a devicetree for booting in
normal aarch64 mode. The hardware supports experimental CHERI support,
which requires a modified kernel.
The AMD (formerly Xilinx) Versal NET SoC gets added, this is a
combined FPGA with Cortex-A78 CPUs in a SoC.
Six new ST STM32MP2 SoC variants are added. Like the earlier
STM32MP25, the MP211, MP213, MP215, MP231, MP233 and MP235 models are
based on one or two Cortex-A35 cores but each feature a different set
of I/O devices.
Mediatek MT8370 is a minor variation of MT8390 with fewer CPU and GPU
cores
Apple T2 is the baseboard management controller on earlier Intel CPU
based Macs, with 16 models now gaining initial support.
All the above come with dts files for the reference boards. In
addition, these boards are added for the SoCs that are already
supported:
- The Milk-V Jupiter board based on SpacemiT K1/M1
- NetCube Systems Kumquat board based on the 32-bit Allwinner V3s SoC
- Three boards based on 32-bit stm32mp1
- 11 distinct board variants from Toradex and one from Variscite, all
based on i.MX6
- Google Pixel Pro 6 phone based on gs101 (Tensor)
- Three additional variants of the i.MX8MP based "Skov" board
- A second variant of the i.MX95 EVK board
- Two boards based on Renesas SoCs
- Four boards based the Rockchip RK35xx series, plus the RK3588 'MNT
Reform 2' laptop"
* tag 'soc-dt-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (538 commits)
arm64: dts: Add gpio_intc node for Amlogic A5 SoCs
arm64: dts: Add gpio_intc node for Amlogic A4 SoCs
arm64: dts: hi3660: Add property for fixing CPUIdle
arm64: dts: rockchip: remove ethm0_clk0_25m_out from Sige5 gmac0
arm64: dts: marvell: Use preferred node names for "simple-bus"
arm64: dts: marvell: Drop unused CP11X_TYPE define
arm64: dts: marvell: Move arch timer and pmu nodes to top-level
arm64: dts: rockchip: Fix PWM pinctrl names
arm64: dts: rockchip: fix RK3576 SCMI clock IDs
dt-bindings: clock: rk3576: add SCMI clocks
arm64: dts: rockchip: Fix pcie reset gpio on Orange Pi 5 Max
arm64: dts: amd/seattle: Drop undocumented "spi-controller" properties
arm64: dts: amd/seattle: Fix bus, mmc, and ethernet node names
arm64: dts: amd/seattle: Move and simplify fixed clocks
arm64: dts: amd/seattle: Base Overdrive B1 on top of B0 version
arm64: dts: rockchip: Enable HDMI audio output for ArmSoM Sige7
arm64: dts: rockchip: Enable onboard eMMC on Radxa E20C
arm64: dts: rockchip: Add SDHCI controller for RK3528
arm64: dts: rockchip: Remove bluetooth node from rock-3a
arm64: dts: rockchip: Move rk356x scmi SHMEM to reserved memory
...
Firmware contants do not fit the purpose of bindings because they are not
independent IDs for abstractions. They are more or less just contants which
better to wire via header with DT which is using it.
That's why add deprecated message to dt binding header and also update
existing dt bindings not to use macros from the header and replace them by
it's value. Actually value is not relevant because it is only example.
The similar changes have been done by commit 9d92925768 ("dt-bindings:
pinctrl: samsung: deprecate header with register constants").
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/2a6f0229522327939e6893565e540b75f854a37b.1738600745.git.michal.simek@amd.com
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
Pull ata updates from Damien Le Moal:
- Convert the qcom AHCI controller DT bindings to DT schema (from
Rayyan)
- Cleanup of libata core and drivers code handling controller and
device quirks to rename "blacklist" to the more neutral "quirk" and
to replace the rarely used "horkage" term with the more common
"quirk" naming (me)
- Add libata-core message to print the quirks applied to a controller
or device (me)
- Remove the not-so-useful function ata_noop_qc_prep() from libata core
(me)
- ahci_imx driver cleanup, improvements and DT bindings compatible
strings update (Richard and Dan)
- libahci_platform improvements (Zhang)
- Remove obsolete functions declarations from libata header files (from
Gaosheng)
- Improve teh ahci_brcm driver using managed device resources funetions
(Zhang)
- Introduce new helper function to improve libata EH code readability
(Niklas)
- Enable module autoloading for the pata_ftide010, pata_ixp4xx and
sata_gemini drivers (Liao)
- Move SATA related functions and data declaraions from libata-core to
libata-sata (me)
- Rename the function handling the sense data for successful NCQ
commands log to better reflect that function actions (me)
- Reduce libata memory usage by moving port resources to struct
ata_device and by optimizing the management of resources for CDL
capable devices (me)
- Improve libata-eh handling of failed ATA passthrough commands
(Niklas)
* tag 'ata-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: (39 commits)
ata: libata: Clear DID_TIME_OUT for ATA PT commands with sense data
ata: libata: Fix W=1 compilation warning
ata: libata: Improve CDL resource management
ata: libata: Introduce ata_dev_free_resources
ata: libata: Move sector_buf from struct ata_port to struct ata_device
ata: libata: Rename ata_eh_read_sense_success_ncq_log()
ata: libata: Move sata_std_hardreset() definition to libata-sata.c
ata: libata: Move sata_down_spd_limit() to libata-sata.c
ata: libata: Improve __ata_qc_complete()
ata: libata-scsi: Improve ata_scsi_handle_link_detach()
ata: libata: Cleanup libata-transport
ata: sata_gemini: Enable module autoloading
ata: pata_ixp4xx: Enable module autoloading
ata: pata_ftide010: Enable module autoloading
ata: libata: Add helper ata_eh_decide_disposition()
ata: ahci_brcm: Use devm_platform_ioremap_resource_byname() helper function
ata: libata: Remove obsolete function declarations
ata: ahci_imx: Fix error code in probe()
ata: libahci_platform: Simplify code with for_each_child_of_node_scoped()
ata: ahci_imx: Correct the email address
...
The Rockchip variant of the dwc-ahci controller does have and need power-
domains to work, though the binding does not mention them, making dtccheck
quite unhappy:
DTC_CHK arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dtb
/home/devel/hstuebner/00_git-repos/linux-rockchip/_build-arm64/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dtb: sata@fc800000: Unevaluated properties are not allowed ('power-domains' was unexpected)
from schema $id: http://devicetree.org/schemas/ata/rockchip,dwc-ahci.yaml#
Fix that by adding the missing power-domain property to the binding.
Fixes: 85b0e13b19 ("dt-bindings: ata: dwc-ahci: add Rockchip RK3588")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The APQ8064 SATA AHCI controller is used in apq8064.dtsi, although it
was not documented in the old text bindings.
Add its compatible to ahci-platform.yaml.
Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Add missing documented compatible strings 'fsl,ls1046a-ahci' and
'fsl,ls1012a-ahci'. Allow 'fsl,ls1012a-ahci' to fallback to
'fsl,ls1043a-ahci'.
Fix below CHECK_DTB warnings
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: sata@3200000:
compatible:0: 'fsl,ls1012a-ahci' is not one of ['fsl,ls1021a-ahci',
'fsl,ls1043a-ahci', 'fsl,ls1028a-ahci', 'fsl,ls1088a-ahci',
'fsl,ls2080a-ahci', 'fsl,lx2160a-ahci']
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: sata@3200000:
compatible: ['fsl,ls1012a-ahci', 'fsl,ls1043a-ahci'] is too long
Fixes: e58e12c5c3 ("dt-bindings: ata: ahci-fsl-qoriq: convert to yaml format")
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240712185740.3819170-1-Frank.Li@nxp.com
[cassel: rewrap commit log lines, capitalize SATA]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Convert the imx-pata bindings to DT schema.
Add missing fsl,imx31-pata and fsl,imx51-pata compatibles during
conversion, because they are already being used in existing DTS.
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Pull ata updates from Niklas Cassel:
- Do not enable LPM for external ports (hotplug-capable ports or eSATA
ports), as the HBA will not be able to detect hot plug removal events
when LPM is enabled (me)
- Drop the board type board_ahci_low_power. Now when we make sure that
we won't enable LPM for external ports, we can always set the LPM
policy to CONFIG_SATA_MOBILE_LPM_POLICY for internal ports. There is
thus no longer any need for the board type board_ahci_low_power, so
it can be removed. (As before, LPM features not supported by the HBA
and/or the device will not be enabled, regardless of the LPM policy
Kconfig) (Mario Limonciello)
Note that the default CONFIG_SATA_MOBILE_LPM_POLICY value is still 0
(which will not try to enable any LPM features), however, most Linux
distributions override this and set it to 3 (Medium power with DIPM).
We intend to change the default to 3 in the coming cycles, but we
will wait a cycle or two.
- Add board type board_ahci_pcs_quirk and make all legacy Intel
platforms use it. The Intel PCS quirk was being applied to basically
all Intel platforms, which caused some issues (the device failing to
come back after a reset), when being applied to newer Intel platforms
where it shouldn't have been applied.
New platforms can be added using board type board_ahci, which will
not have the quirk applied (me)
- Rename board_ahci_nosntf to board_ahci_pcs_quirk_no_sntf to more
clearly highlight that it applies two different quirks (me)
- Modify the ahci_broken_devslp() quirk to be implemented like all the
other quirks (i.e. define a board type for the quirk) (me)
- Drop unused board_ahci_noncq board type (me)
- Rename board_ahci_nomsi to board_ahci_no_msi to match the other board
types (me)
- Make pata_parport_bus_type const (Ricardo B. Marliere)
- Remove at91 compact flash device tree binding. (The binding is not
used by any driver.) (from Hari Prasath Gujulan Elango)
- Convert MediaTek device tree binding to json-schema (Rafał Miłecki)
- At boot, print the number of implemented ports, instead of printing
the maximum number of ports supported by the HBA silicon (me)
* tag 'ata-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ahci: print the number of implemented ports
dt-bindings: ata: convert MediaTek controller to the json-schema
ahci: rename board_ahci_nomsi
ahci: drop unused board_ahci_noncq
ahci: clean up ahci_broken_devslp quirk
ahci: rename board_ahci_nosntf
ahci: clean up intel_pcs_quirk
ata: ahci: Drop low power policy board type
ata: ahci: do not enable LPM on external ports
ata: ahci: drop hpriv param from ahci_update_initial_lpm_policy()
ata: ahci: a hotplug capable port is an external port
ata: ahci: move marking of external port earlier
dt-bindings: ata: atmel: remove at91 compact flash documentation
ata: pata_parport: make pata_parport_bus_type const
The compatible "at91rm9200-cf" is not used by any driver, hence remove the
corresponding documentation.
Signed-off-by: Hari Prasath Gujulan Elango <Hari.PrasathGE@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[cassel: add missing space in commit log]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Device specific bindings should not allow undefined properties. This is
accomplished in json-schema with 'additionalProperties: false'.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The PATA child node schema is missing constraints to prevent unknown
properties. As none of the users of this common binding extend the child
nodes with additional properties, adding "additionalProperties: false"
here is sufficient.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Pull ata updates from Damien Le Moal:
- Add support for the .remove_new callback to the ata_platform code to
simplify device removal interface (Uwe)
- Code simplification in ata_dev_revalidate() (Yahu)
- Fix code indentation and coding style in the pata_parport protocol
modules to avoid warnings from static code analyzers (me)
- Clarify ata_eh_qc_retry() behavior with better comments (Niklas)
- Simplify and improve ata_change_queue_depth() behavior to have a
consistent behavior between libsas managed devices and libata managed
devices (e.g. AHCI connected devices) (me)
- Cleanup libata-scsi and libata-eh code to use the ata_ncq_enabled()
and ata_ncq_supported() helpers instead of open coding flags tests
(me)
- Cleanup ahci_reset_controller() code (me)
- Change the pata_octeon_cf and sata_svw drivers to use
of_property_read_reg() to simplify the code (Rob, me)
- Remove unnecessary include files from ahci_octeon driver (me)
- Modify the DesignWare ahci dt bindings to add support for the
Rockchip RK3588 AHCI (Sebastian)
* tag 'ata-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (29 commits)
dt-bindings: phy: rockchip: rk3588 has two reset lines
dt-bindings: ata: dwc-ahci: add Rockchip RK3588
dt-bindings: ata: dwc-ahci: add PHY clocks
ata: ahci_octeon: Remove unnecessary include
ata: pata_octeon_cf: Add missing header include
ata: ahci: Cleanup ahci_reset_controller()
ata: Use of_property_read_reg() to parse "reg"
ata: libata-scsi: Use ata_ncq_supported in ata_scsi_dev_config()
ata: libata-eh: Use ata_ncq_enabled() in ata_eh_speed_down()
ata: libata-sata: Improve ata_change_queue_depth()
ata: libata-sata: Simplify ata_change_queue_depth()
ata: libata-eh: Clarify ata_eh_qc_retry() behavior at call site
ata: pata_parport: Fix on26 module code indentation and style
ata: pata_parport: Fix on20 module code indentation and style
ata: pata_parport: Fix ktti module code indentation and style
ata: pata_parport: Fix kbic module code indentation and style
ata: pata_parport: Fix friq module code indentation and style
ata: pata_parport: Fix fit3 module code indentation and style
ata: pata_parport: Fix fit2 module code indentation and style
ata: pata_parport: Fix epia module code indentation and style
...
Pull ARM SoC devicetree updates from Arnd Bergmann:
"The biggest change this time is for the 32-bit devicetree files, which
are all moved to a new location, using separate subdirectories for
each SoC vendor, following the same scheme that is used on arm64, mips
and riscv. This has been discussed for many years, but so far we never
did this as there was a plan to move the files out of the kernel
entirely, which has never happened.
The impact of this will be that all external patches no longer apply,
and anything depending on the location of the dtb files in the build
directory will have to change. The installed files after 'make
dtbs_install' keep the current location.
There are six added SoCs here that are largely variants of previously
added chips. Two other chips are added in a separate branch along with
their device drivers.
- The Samsung Exynos 4212 makes its return after the Samsung Galaxy
Express phone is addded at last. The SoC support was originally
added in 2012 but removed again in 2017 as it was unused at the
time.
- Amlogic C3 is a Cortex-A35 based smart IP camera chip
- Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
the still common MSM8916 (Snapdragon 410) phone chip that has been
supported for a long time.
- Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
laptop chips, used in the Lenovo Flex 5G, which is added along with
the reference board.
- Qualcomm SDX75 is the latest generation modem chip that is used as
a peripherial in phones but can also run a standalone Linux. Unlike
the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.
- Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the
Xuantie C910 core, a step up from all previously added rv64 chips.
All of the above come with reference board implementations, those
included there are 39 new board files, but only five more 32-bit this
time, probably a new low:
- Marantec Maveo board based on dhcor imx6ull module
- Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip
- Epson Moverio BT-200 AR glasses based on TI OMAP4
- PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM
- ICnova ADB4006 board based on Allwinner A20
On the 64-bit side, there are also fewer addded machines than we had
in the recent releases:
- Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM
EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device.
- NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234
- Qualcomm gains support for 6 reference boards on various members of
their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua
phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top
of the various reference platforms for their new chips.
- Rockchips support for several newer boards: Indiedroid Nova
(rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM
NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn
Fastrhino R66S/R68S (rk3568)
- TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex
Verdin family with AM62 COM, carrier and dev boards
Other changes to existing boards contain the usual minor improvements
along with
- continued updates to clean up dts files based on dtc warnings and
binding checks, in particular cache properties and node names
- support for devicetree overlays on at91, bcm283x
- significant additions to existing SoC support on mediatek,
qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST
STM32MP1
As usual, a lot more detail is available in the individual merge
commits"
* tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits)
ARM: mvebu: fix unit address on armada-390-db flash
ARM: dts: Move .dts files to vendor sub-directories
kbuild: Support flat DTBs install
ARM: dts: Add .dts files missing from the build
ARM: dts: allwinner: Use quoted #include
ARM: dts: lan966x: kontron-d10: add PHY interrupts
ARM: dts: lan966x: kontron-d10: fix SPI CS
ARM: dts: lan966x: kontron-d10: fix board reset
ARM: dts: at91: Enable device-tree overlay support for AT91 boards
arm: dts: Enable device-tree overlay support for AT91 boards
arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller
ARM: dts: at91: use generic name for shutdown controller
ARM: dts: BCM5301X: Add cells sizes to PCIe nodes
dt-bindings: firmware: brcm,kona-smc: convert to YAML
riscv: dts: sort makefile entries by directory
riscv: defconfig: enable T-HEAD SoC
MAINTAINERS: add entry for T-HEAD RISC-V SoC
riscv: dts: thead: add sipeed Lichee Pi 4A board device tree
riscv: dts: add initial T-HEAD TH1520 SoC device tree
riscv: Add the T-HEAD SoC family Kconfig option
...
This adds Rockchip RK3588 AHCI binding. In order to narrow down the
allowed clocks without bloating the generic binding, the description
of Rockchip's AHCI controllers has been moved to its own file.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
arm64: ZynqMP DT changes for v6.5
Various small fixes and cleanups to be aligned with the latest dt-schema.
Other major changes are:
- Wire mali-400 gpu
- Change board name for zcu1275
- Use ethernet-phy-id to handle ETH phy reset properly
- Switch to amd.com emails
- Update people in DT bindings
* tag 'zynqmp-dt-for-v6.5' of https://github.com/Xilinx/linux-xlnx: (33 commits)
dt-bindings: usb: xilinx: Replace Manish by Piyush
dt-bindings: xilinx: Remove Rajan, Jolly and Manish
arm64: zynqmp: Used fixed-partitions for QSPI in k26
arm64: zynqmp: Add pmu interrupt-affinity
arm64: zynqmp: Set qspi tx-buswidth to 4
arm64: zynqmp: Fix usb node drive strength and slew rate
arm64: zynqmp: Describe TI phy as ethernet-phy-id
arm64: zynqmp: Switch to amd.com emails
arm64: zynqmp: Convert kv260-revA overlay to ASCII text
dt-bindings: xilinx: Switch xilinx.com emails to amd.com
arm64: xilinx: Use zynqmp prefix for SOM dt overlays
arm64: zynqmp: Add phase tags marking
arm64: zynqmp: Describe bus-width for SD card on KV260
arm64: zynqmp: Enable AMS on SOM and other zcu10x boards
arm64: zynqmp: Enable DP driver for SOMs
arm64: zynqmp: Setup clock for DP and DPDMA
arm64: zynqmp: Switch to ethernet-phy-id in kv260
arm64: zynqmp: Disable USB3.0 for zc1751-xm016-dc2
arm64: zynqmp: Add pinctrl emmc description to SM-K26
arm64: zynqmp: Add gpio labels for modepin gpio
...
Link: https://lore.kernel.org/r/CAHTX3d+2s_KmCnd=x5hydGb+LYoznAzYGTizvqqN2NFmrBurfw@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Current only one entry is enabled but IP itself is using 4 different IDs
which are already listed in zynqmp.dtsi.
sata: ahci@fd0c0000 {
compatible = "ceva,ahci-1v84";
...
iommus = <&smmu 0x4c0>, <&smmu 0x4c1>,
<&smmu 0x4c2>, <&smmu 0x4c3>;
};
Fixes: 8ac47837f0 ("arm64: dts: zynqmp: Add missing iommu IDs")
Cc: stable@vger.kernel.org # v5.12+
Signed-off-by: Michal Simek <michal.simek@amd.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Add UniPhier SATA controller compatible string to the platform binding.
This controller needs three reset controls for Pro4 SoC, or two reset
controls for PXs2 and PXs3 SoCs.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Several devices can be attached to memory controllers (or memory-mapped
buses), thus they can come with additional controller-specific
properties, e.g. devices wired under Intel IXP4XX bus: cfi-flash,
intel,ixp4xx-compact-flash, NS8250 serial and MAX6369 watchdog.
Referencing Memory Controller or IXP4XX bus peripheral properties fixes
few dtbs_check warnings like:
intel-ixp42x-gateworks-gw2348.dtb: ide@1,0: Unevaluated properties are not allowed
('intel,ixp4xx-eb-ahb-split-transfers', 'intel,ixp4xx-eb-byte-access', ... ' were unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230206092624.22922-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Pull devicetree updates from Rob Herring:
"DT core:
- Fix node refcounting in of_find_last_cache_level()
- Constify device_node in of_device_compatible_match()
- Fix 'dma-ranges' handling in bus controller nodes
- Fix handling of initrd start > end
- Improve error reporting in of_irq_init()
- Taint kernel on DT unittest running
- Use strscpy instead of strlcpy
- Add a build target, dt_compatible_check, to check for compatible
strings used in kernel sources against compatible strings in DT
schemas.
- Handle DT_SCHEMA_FILES changes when rebuilding
DT bindings:
- LED bindings for MT6370 PMIC
- Convert Mediatek mtk-gce mailbox, MIPS CPU interrupt controller,
mt7621 I2C, virtio,pci-iommu, nxp,tda998x, QCom fastrpc, qcom,pdc,
and arm,versatile-sysreg to DT schema format
- Add nvmem cells to u-boot,env schema
- Add more LED_COLOR_ID definitions
- Require 'opp-table' uses to be a node
- Various schema fixes to match QEMU 'virt' DT usage
- Tree wide dropping of redundant 'Device Tree Binding' in schema
titles
- More (unevaluated|additional)Properties fixes in schema child nodes
- Drop various redundant minItems equal to maxItems"
* tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (62 commits)
of: base: Shift refcount decrement in of_find_last_cache_level()
dt-bindings: leds: Add MediaTek MT6370 flashlight
dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator
dt-bindings: mailbox: Convert mtk-gce to DT schema
of: base: make of_device_compatible_match() accept const device node
of: Fix "dma-ranges" handling for bus controllers
of: fdt: Remove unused struct fdt_scan_status
dt-bindings: display: st,stm32-dsi: Handle data-lanes in DSI port node
dt-bindings: timer: Add power-domains for TI timer-dm on K3
dt: Add a check for undocumented compatible strings in kernel
kbuild: take into account DT_SCHEMA_FILES changes while checking dtbs
dt-bindings: interrupt-controller: migrate MIPS CPU interrupt controller text bindings to YAML
dt-bindings: i2c: migrate mt7621 text bindings to YAML
dt-bindings: power: gpcv2: correct patternProperties
dt-bindings: virtio: Convert virtio,pci-iommu to DT schema
dt-bindings: timer: arm,arch_timer: Allow dual compatible string
dt-bindings: arm: cpus: Add kryo240 compatible
dt-bindings: display: bridge: nxp,tda998x: Convert to json-schema
dt-bindings: nvmem: u-boot,env: add basic NVMEM cells
dt-bindings: remoteproc: qcom,adsp: enforce smd-edge schema
...
Baikal-T1 AHCI controller is based on the DWC AHCI SATA IP-core v4.10a
with the next specific settings: two SATA ports, cascaded CSR access based
on two clock domains (APB and AXI), selectable source of the reference
clock (though stable work is currently available from the external source
only), two reset lanes for the application and SATA ports domains. Other
than that the device is fully compatible with the generic DWC AHCI SATA
bindings.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
