XR24 planes were not shown properly, so now set the right registers
to correctly enable displaying these planes.
It also moves the alpha register settings to fimd_win_set_pixfmt()
to keep all pixel format stuff together.
v2: remove leftover var alpha
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
drm/panel: Changes for v4.1-rc1
This set of changes adds support for a whole bunch of new panels, mostly
simple ones. There's now also support for panels to provide display
timings rather than fixed modes, which should allow panels to work with
a larger number of display drivers. Eventually drivers should migrate to
this new interface and the fixed modes removed from panels.
There are also a couple of sparse fixes for the PS8622 and PS8625 bridge
drivers.
* tag 'drm/panel/for-4.1-rc1' of git://anongit.freedesktop.org/tegra/linux:
drm/panel: Add support for Ampire AM-800480R3TMQW-A1H 800x480 7" panel
of: Add vendor prefix for Ampire Co., Ltd.
drm/panel: Add display timing for HannStar HSD070PWW1
drm/panel: simple: Add display timing support
drm/panel: Add display timing support
drm/panel: Add support for OrtusTech COM43H4M85ULC panel
of: Add vendor prefix for Ortus Technology Co., Ltd.
drm/panel: Add bus format for Giantplus GPG482739QS5 panel
drm/panel: simple: Add support for AUO b101ean01 panel
drm/panel: simple: Add support for Innolux ZJ070NA-01P
drm/panel: simple: Add support for Innolux AT043TN24
drm/panel: simple: Add support for Shelly SCA07010-BFN-LNN
drm/panel: simple: Add support for Samsung LTN140AT29 panel
drm: Remove unused DRM_MODE_OBJECT_BRIDGE
drm/bridge: ptn3460: Fix sparse warnings
drm/bridge: ps8622: Fix sparse warnings
drm/bridge: Add I2C based driver for ps8622/ps8625 bridge
drm/tegra: Changes for v4.1-rc1
Perhaps the most noteworthy change in this set is the implementation of
a hardware VBLANK counter using host1x syncpoints. The SOR registers can
now be dumped via debugfs, which can be useful while debugging. The IOVA
address space maintained by the driver can also be dumped via debugfs.
Other than than, these changes are mostly cleanup work, such as making
register names more consistent or removing unused code (that was left
over after the atomic mode-setting conversion). There's also a fix for
eDP that makes the driver cope with firmware that already initialized
the display (such as the firmware on the Tegra-based Chromebooks).
* tag 'drm/tegra/for-4.1-rc1' of git://anongit.freedesktop.org/tegra/linux:
drm/tegra: sor: Reset during initialization
drm/tegra: gem: Return 64-bit offset for mmap(2)
drm/tegra: hdmi: Name register fields consistently
drm/tegra: hdmi: Resets are synchronous
drm/tegra: dc: Document tegra_dc_state_setup_clock()
drm/tegra: dc: Remove unused callbacks
drm/tegra: dc: Remove unused function
drm/tegra: dc: Use base atomic state helpers
drm/atomic: Add helpers for state-subclassing drivers
drm/tegra: dc: Implement hardware VBLANK counter
gpu: host1x: Export host1x_syncpt_read()
drm/tegra: sor: Dump registers via debugfs
drm/tegra: sor: Registers are 32-bit
drm/tegra: Provide debugfs file for the IOVA space
drm/tegra: dc: Check for valid parent clock
Pull networking fixes from David Miller:
1) In TCP, don't register an FRTO for cumulatively ACK'd data that was
previously SACK'd, from Neal Cardwell.
2) Need to hold RNL mutex in ipv4 multicast code namespace cleanup,
from Cong WANG.
3) Similarly we have to hold RNL mutex for fib_rules_unregister(), also
from Cong WANG.
4) Revert and rework netns nsid allocation fix, from Nicolas Dichtel.
5) When we encapsulate for a tunnel device, skb->sk still points to the
user socket. So this leads to cases where we retraverse the
ipv4/ipv6 output path with skb->sk being of some other address
family (f.e. AF_PACKET). This can cause things to crash since the
ipv4 output path is dereferencing an AF_PACKET socket as if it were
an ipv4 one.
The short term fix for 'net' and -stable is to elide these socket
checks once we've entered an encapsulation sequence by testing
xmit_recursion.
Longer term we have a better solution wherein we pass the tunnel's
socket down through the output paths, but that is way too invasive
for 'net' and -stable.
From Hannes Frederic Sowa.
6) l2tp_init() failure path forgets to unregister per-net ops, from
Cong WANG.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
net/mlx4_core: Fix error message deprecation for ConnectX-2 cards
net: dsa: fix filling routing table from OF description
l2tp: unregister l2tp_net_ops on failure path
mvneta: dont call mvneta_adjust_link() manually
ipv6: protect skb->sk accesses from recursive dereference inside the stack
netns: don't allocate an id for dead netns
Revert "netns: don't clear nsid too early on removal"
ip6mr: call del_timer_sync() in ip6mr_free_table()
net: move fib_rules_unregister() under rtnl lock
ipv4: take rtnl_lock and mark mrt table as freed on namespace cleanup
tcp: fix FRTO undo on cumulative ACK of SACKed range
xen-netfront: transmit fully GSO-sized packets
We should not consult skb->sk for output decisions in xmit recursion
levels > 0 in the stack. Otherwise local socket settings could influence
the result of e.g. tunnel encapsulation process.
ipv6 does not conform with this in three places:
1) ip6_fragment: we do consult ipv6_npinfo for frag_size
2) sk_mc_loop in ipv6 uses skb->sk and checks if we should
loop the packet back to the local socket
3) ip6_skb_dst_mtu could query the settings from the user socket and
force a wrong MTU
Furthermore:
In sk_mc_loop we could potentially land in WARN_ON(1) if we use a
PF_PACKET socket ontop of an IPv6-backed vxlan device.
Reuse xmit_recursion as we are currently only interested in protecting
tunnel devices.
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull input subsystem fixes from Dmitry Torokhov:
"A fix for ALPS driver for issue introduced in the latest update and a
tweak for yet another Lenovo box in Synaptics.
There will be more ALPS tweaks coming.."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: define INPUT_PROP_ACCELEROMETER behavior
Input: synaptics - fix min-max quirk value for E440
Input: synaptics - add quirk for Thinkpad E440
Input: ALPS - fix max coordinates for v5 and v7 protocols
Input: add MT_TOOL_PALM
Pull block layer fix from Jens Axboe:
"Just one patch in this pull request, fixing a regression caused by a
'mathematically correct' change to lcm()"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: fix blk_stack_limits() regression due to lcm() change
Pull irqchip fixes from Jason Cooper:
"This is the second round of fixes for irqchip. It contains some fixes
found while the arm64 guys were writing the kvm gicv3 its emulation.
GICv3 ITS:
- Small batch of fixes discovered while writing the kvm ITS emulation"
* tag 'irqchip-fixes-4.0-2' of git://git.infradead.org/users/jcooper/linux:
irqchip: gicv3-its: Use non-cacheable accesses when no shareability
irqchip: gicv3-its: Fix PROP/PEND and BASE/CBASE confusion
irqchip: gicv3-its: Fix device ID encoding
irqchip: gicv3-its: Fix encoding of collection's target redistributor
Pull networking fixes from David Miller:
1) Fix use-after-free with mac80211 RX A-MPDU reorder timer, from
Johannes Berg.
2) iwlwifi leaks memory every module load/unload cycles, fix from Larry
Finger.
3) Need to use for_each_netdev_safe() in rtnl_group_changelink()
otherwise we can crash, from WANG Cong.
4) mlx4 driver does register_netdev() too early in the probe sequence,
from Ido Shamay.
5) Don't allow router discovery hop limit to decrease the interface's
hop limit, from D.S. Ljungmark.
6) tx_packets and tx_bytes improperly accounted for certain classes of
USB network devices, fix from Ben Hutchings.
7) ip{6}mr_rules_init() mistakenly use plain kfree to release the ipmr
tables in the error path, they must instead use ip{6}mr_free_table().
Fix from WANG Cong.
8) cxgb4 doesn't properly quiesce all RX activity before unregistering
the netdevice. Fix from Hariprasad Shenai.
9) Fix hash corruptions in ipvlan driver, from Jiri Benc.
10) nla_memcpy(), like a real memcpy, should fully initialize the
destination buffer, even if the source attribute is smaller. Fix
from Jiri Benc.
11) Fix wrong error code returned from iucv_sock_sendmsg(). We should
use whatever sock_alloc_send_skb() put into 'err'. From Eugene
Crosser.
12) Fix slab object leak on module unload in TIPC, from Ying Xue.
13) Need a READ_ONCE() when reading the cached RX socket route in
tcp_v{4,6}_early_demux(). From Michal Kubecek.
14) Still too many problems with TPC support in the ath9k driver, so
disable it for now. From Felix Fietkau.
15) When in AP mode the rtlwifi driver can leak DMA mappings, fix from
Larry Finger.
16) Missing kzalloc() failure check in gs_usb CAN driver, from Colin Ian
King.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
cxgb4: Fix to dump devlog, even if FW is crashed
cxgb4: Firmware macro changes for fw verison 1.13.32.0
bnx2x: Fix kdump when iommu=on
bnx2x: Fix kdump on 4-port device
mac80211: fix RX A-MPDU session reorder timer deletion
MAINTAINERS: Update Intel Wired Ethernet Driver info
tipc: fix a slab object leak
net/usb/r8152: add device id for Lenovo TP USB 3.0 Ethernet
af_iucv: fix AF_IUCV sendmsg() errno
openvswitch: Return vport module ref before destruction
netlink: pad nla_memcpy dest buffer with zeroes
bonding: Bonding Overriding Configuration logic restored.
ipvlan: fix check for IP addresses in control path
ipvlan: do not use rcu operations for address list
ipvlan: protect against concurrent link removal
ipvlan: fix addr hash list corruption
net: fec: setup right value for mdio hold time
net: tcp6: fix double call of tcp_v6_fill_cb()
cxgb4vf: Fix sparse warnings
netns: don't clear nsid too early on removal
...
Many panel data sheets, additionally to typical values, list allowed
ranges for timings such as hsync/vsync lengths, porches, and the pixel
clock rate. These can be stored in a struct display_timing, to be used
by an encoder mode_fixup callback to clamp user provided timing values
or to validate workarounds for clock source limitations.
This patch adds a new drm_panel_funcs callback that returns the panel's
available display_timing entries.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
On 64-bit targets, tegra_gem_mmap() only returns a partial offset to
userspace. As such, subsequent calls to mmap(2) may fail. Change the
arguments to use a 64-bit offset to fix this.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Erik Faye-Lund <kusmabite@gmail.com>
[treding@nvidia.com: tweak commit message]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Drivers that subclass CRTC, plane or connector state need to carefully
duplicate the code that the atomic helpers have. This is bound to cause
breakage eventually because it requires auditing all drivers and update
them when code is added to the helpers.
In order to avoid that, implement new helpers that perform the required
steps when copying and destroying state. These new helpers are exported
so that state-subclassing drivers can use them. The default helpers are
implemented using them as well, providing a single location that needs
to be changed when adding to base atomic states.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This function is used to read the current value of the syncpt and is
useful in situations where drivers don't schedule work and wait for the
syncpoint to increment. One particular use-case is using the syncpoint
as a VBLANK counter.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Pull lazytime fixes from Ted Ts'o:
"This fixes a problem in the lazy time patches, which can cause
frequently updated inods to never have their timestamps updated.
These changes guarantee that no timestamp on disk will be stale by
more than 24 hours"
* tag 'lazytime_fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
fs: add dirtytime_expire_seconds sysctl
fs: make sure the timestamps for lazytime inodes eventually get written
Pull nfsd fixes from Bruce Fields:
"Two main issues:
- We found that turning on pNFS by default (when it's configured at
build time) was too aggressive, so we want to switch the default
before the 4.0 release.
- Recent client changes to increase open parallelism uncovered a
serious bug lurking in the server's open code.
Also fix a krb5/selinux regression.
The rest is mainly smaller pNFS fixes"
* 'for-4.0' of git://linux-nfs.org/~bfields/linux:
sunrpc: make debugfs file creation failure non-fatal
nfsd: require an explicit option to enable pNFS
NFSD: Fix bad update of layout in nfsd4_return_file_layout
NFSD: Take care the return value from nfsd4_encode_stateid
NFSD: Printk blocklayout length and offset as format 0x%llx
nfsd: return correct lockowner when there is a race on hash insert
nfsd: return correct openowner when there is a race to put one in the hash
NFSD: Put exports after nfsd4_layout_verify fail
NFSD: Error out when register_shrinker() fail
NFSD: Take care the return value from nfsd4_decode_stateid
NFSD: Check layout type when returning client layouts
NFSD: restore trace event lost in mismerge
Final drm-misc pull for 4.0, just various things all over, including a few
more important atomic fixes. btw I didn't pick up the vmwgfx patch from
Ville's series, but one patch has one hunk touching vmwgfx and
Thomas/Jakob didn't get around to ack it. I figured it's simple enough to
be ok though.
* tag 'topic/drm-misc-2015-03-31' of git://anongit.freedesktop.org/drm-intel:
drm: line wrap DRM_IOCTL_DEF* macros
drm/atomic: Don't try to free a NULL state
drm/atomic: Clear crtcs, connectors and planes when clearing state
drm: Rewrite drm_ioctl_flags() to resemble the new drm_ioctl() code
drm: Use max() to make the ioctl alloc size code cleaner
drm: Simplify core vs. drv ioctl handling
drm: Drop ioctl->cmd_drv
drm: Fix DRM_IOCTL_DEF_DRV()
drm/atomic-helpers: Properly avoid full modeset dance
drm: atomic: Allow setting CRTC active property
drm: atomic: Expose CRTC active property
drm: crtc_helper: Update hwmode before mode_set call
drm: mode: Allow NULL modes for equality check
drm: fb_helper: Simplify exit condition
drm: mode: Fix typo in kerneldoc
drm/dp: Print the number of bytes processed for aux nacks
This backmerges 4.0-rc6 due to the recent fixes in rc5/6
- DP link rate refactoring from Ville
- byt/bsw rps tuning from Chris
- kerneldoc for the shrinker code
- more dynamic ppgtt pte work (Michel, Ben, ...)
- vlv dpll code refactoring to prep fro bxt (Imre)
- refactoring the sprite colorkey code (Ville)
- rotated ggtt view support from Tvrtko
- roll out struct drm_atomic_state to prep for atomic update (Ander)
* tag 'drm-intel-next-2015-03-27-merge' of git://anongit.freedesktop.org/drm-intel: (473 commits)
Linux 4.0-rc6
arm64: juno: Fix misleading name of UART reference clock
drm/i915: Update DRIVER_DATE to 20150327
drm/i915: Skip allocating shadow batch for 0-length batches
drm/i915: Handle error to get connector state when staging config
drm/i915: Compare GGTT view structs instead of types
drm/i915: fix simple_return.cocci warnings
drm/i915: Add module param to test the load detect code
drm/i915: Remove usage of encoder->new_crtc from clock computations
drm/i915: Don't look at staged config crtc when changing DRRS state
drm/i915: Convert intel_pipe_will_have_type() to using atomic state
drm/i915: Pass an atomic state to modeset_global_resources() functions
drm/i915: Add dynamic page trace events
drm/i915: Finish gen6/7 dynamic page table allocation
drm/i915: Remove unnecessary gen6_ppgtt_unmap_pages
drm/i915: Fix i915_dma_map_single positive error code
drm/i915: Prevent out of range pt in gen6_for_each_pde
drm/i915: fix definition of the DRM_IOCTL_I915_GET_SPRITE_COLORKEY ioctl
drm/i915: Rip out GET_SPRITE_COLORKEY ioctl
watchdog: imgpdc: Fix default heartbeat
...
We currently have a problem that SELinux policy is being enforced when
creating debugfs files. If a debugfs file is created as a side effect of
doing some syscall, then that creation can fail if the SELinux policy
for that process prevents it.
This seems wrong. We don't do that for files under /proc, for instance,
so Bruce has proposed a patch to fix that.
While discussing that patch however, Greg K.H. stated:
"No kernel code should care / fail if a debugfs function fails, so
please fix up the sunrpc code first."
This patch converts all of the sunrpc debugfs setup code to be void
return functins, and the callers to not look for errors from those
functions.
This should allow rpc_clnt and rpc_xprt creation to work, even if the
kernel fails to create debugfs files for some reason.
Symptoms were failing krb5 mounts on systems using gss-proxy and
selinux.
Fixes: 388f0c7767 "sunrpc: add a debugfs rpc_xprt directory..."
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Linux 3.19 commit 69c953c ("lib/lcm.c: lcm(n,0)=lcm(0,n) is 0, not n")
caused blk_stack_limits() to not properly stack queue_limits for stacked
devices (e.g. DM).
Fix this regression by establishing lcm_not_zero() and switching
blk_stack_limits() over to using it.
DM uses blk_set_stacking_limits() to establish the initial top-level
queue_limits that are then built up based on underlying devices' limits
using blk_stack_limits(). In the case of optimal_io_size (io_opt)
blk_set_stacking_limits() establishes a default value of 0. With commit
69c953c, lcm(0, n) is no longer n, which compromises proper stacking of
the underlying devices' io_opt.
Test:
$ modprobe scsi_debug dev_size_mb=10 num_tgts=1 opt_blks=1536
$ cat /sys/block/sde/queue/optimal_io_size
786432
$ dmsetup create node --table "0 100 linear /dev/sde 0"
Before this fix:
$ cat /sys/block/dm-5/queue/optimal_io_size
0
After this fix:
$ cat /sys/block/dm-5/queue/optimal_io_size
786432
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 3.19+
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Turns out sending out layouts to any client is a bad idea if they
can't get at the storage device, so require explicit admin action
to enable pNFS.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Backmerge Linux 4.0-rc6 because conflicts are (again) getting out of
hand. To make sure we don't lose any bugfixes from the 4.0-rc5-rc6
flurry of patches we've applied them all to -next too.
Conflicts:
drivers/gpu/drm/i915/intel_display.c
Always take the version from -next, we've already handled all
conflicts with explicit cherrypicking.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
The ITS driver sometime mixes up the use of GICR_PROPBASE bitfields
for the GICR_PENDBASE register, and GITS_BASER for GICR_CBASE.
This does not lead to any observable bug because similar bits are
at the same location, but this just make the code even harder to
understand...
This patch provides the required #defines and fixes the mixup.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/1427465705-17126-4-git-send-email-marc.zyngier@arm.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
cdc_ncm disagrees with usbnet about how much framing overhead should
be counted in the tx_bytes statistics, and tries 'fix' this by
decrementing tx_bytes on the transmit path. But statistics must never
be decremented except due to roll-over; this will thoroughly confuse
user-space. Also, tx_bytes is only incremented by usbnet in the
completion path.
Fix this by requiring drivers that set FLAG_MULTI_FRAME to set a
tx_bytes delta along with the tx_packets count.
Fixes: beeecd42c3 ("net: cdc_ncm/cdc_mbim: adding NCM protocol statistics")
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Currently the usbnet core does not update the tx_packets statistic for
drivers with FLAG_MULTI_PACKET and there is no hook in the TX
completion path where they could do this.
cdc_ncm and dependent drivers are bumping tx_packets stat on the
transmit path while asix and sr9800 aren't updating it at all.
Add a packet count in struct skb_data so these drivers can fill it
in, initialise it to 1 for other drivers, and add the packet count
to the tx_packets statistic on completion.
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Tested-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently DRM_IOCTL_DEF_DRV does '[DRM_IOCTL_NR(DRM_##ioctl)]' which
doesn't make much sense since DRM_##ioctl is already a the raw ioctl
number. So change it to 'DRM_IOCTL_NR(DRM_IOCTL_##ioctl) - DRM_COMMAND_BASE'
which means the DRM_IOCTL_NR() now makes sense, and also this also means
if there's a mistake in the DRM_IOCTL_##ioctl macros we might get a
warning about it (eg. we would have gotten a sparse warning about the
i915 colorkey get/set ioctl being defined to be the same thing).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fix definition of the DRM_IOCTL_I915_GET_SPRITE_COLORKEY ioctl, so that it
is different from the DRM_IOCTL_I915_SET_SPRITE_COLORKEY ioctl.
Note that this is just for accuracy, the ioctl implementation itself is totally
unused and already ripped out.
Signed-off-by: Tommi Rantala <tt.rantala@gmail.com>
[danvet: Add note that this is a dead ioctl.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dave Chinner reported the following on https://lkml.org/lkml/2015/3/1/226
Across the board the 4.0-rc1 numbers are much slower, and the degradation
is far worse when using the large memory footprint configs. Perf points
straight at the cause - this is from 4.0-rc1 on the "-o bhash=101073" config:
- 56.07% 56.07% [kernel] [k] default_send_IPI_mask_sequence_phys
- default_send_IPI_mask_sequence_phys
- 99.99% physflat_send_IPI_mask
- 99.37% native_send_call_func_ipi
smp_call_function_many
- native_flush_tlb_others
- 99.85% flush_tlb_page
ptep_clear_flush
try_to_unmap_one
rmap_walk
try_to_unmap
migrate_pages
migrate_misplaced_page
- handle_mm_fault
- 99.73% __do_page_fault
trace_do_page_fault
do_async_page_fault
+ async_page_fault
0.63% native_send_call_func_single_ipi
generic_exec_single
smp_call_function_single
This is showing excessive migration activity even though excessive
migrations are meant to get throttled. Normally, the scan rate is tuned
on a per-task basis depending on the locality of faults. However, if
migrations fail for any reason then the PTE scanner may scan faster if
the faults continue to be remote. This means there is higher system CPU
overhead and fault trapping at exactly the time we know that migrations
cannot happen. This patch tracks when migration failures occur and
slows the PTE scanner.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reported-by: Dave Chinner <david@fromorbit.com>
Tested-by: Dave Chinner <david@fromorbit.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull libata fix from Tejun Heo:
"One patch to fix a regression from the recent switch to blk-mq tag
allocation which can cause oops on SAS-attached SATA drives"
* 'for-4.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
ata: Add a new flag to destinguish sas controller
Pull regulator fixes from Mark Brown:
"Two fixes here, one typo fix in the documentation and one fix for a
system hang with one of the Palmas chips caused by the use of an
incorrect offset being provided for one of the registers"
* tag 'regulator-fix-v4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Fix documentation for regmap in the config
regulator: palmas: Correct TPS659038 register definition for REGEN2
Pull regmap fix from Mark Brown:
"This patch fixes a bad interaction between the support that was added
for having regmaps without devices for early system controller
initialization and the trace support.
There's a very good analysis of the actual issue in the commit message
for the change"
* tag 'regmap-fix-v4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: introduce regmap_name to fix syscon regmap trace events
With bridges now moving to a separate registry they are no longer DRM
objects, hence this define is no longer needed.
Signed-off-by: Thierry Reding <treding@nvidia.com>
drm-intel-next-2015-03-13-rebased:
- EU count report param for gen9+ (Jeff McGee)
- piles of pll/wm/... fixes for chv, finally out of preliminary hw support
(Ville, Vijay)
- gen9 rps support from Akash
- more work to move towards atomic from Matt, Ander and others
- runtime pm support for skl (Damien)
- edp1.4 intermediate link clock support (Sonika)
- use frontbuffer tracking for fbc (Paulo)
- remove ilk rc6 (John Harrison)
- a bunch of smaller things and fixes all over
Includes backmerge because git rerere couldn't keep up any more.
* tag 'drm-intel-next-2015-03-13-merge' of git://anongit.freedesktop.org/drm-intel: (366 commits)
drm/i915: Make sure the primary plane is enabled before reading out the fb state
drm/i915: Update DRIVER_DATE to 20150313
drm/i915: Fix vmap_batch page iterator overrun
drm/i915: Export total subslice and EU counts
drm/i915: redefine WARN_ON_ONCE to include the condition
drm/i915/skl: Implement WaDisableHBR2
drm/i915: Remove the preliminary_hw_support shackles from CHV
drm/i915: Read CHV_PLL_DW8 from the correct offset
drm/i915: Rewrite IVB FDI bifurcation conflict checks
drm/i915: Rewrite some some of the FDI lane checks
drm/i915/skl: Enable the RPS interrupts programming
drm/i915/skl: Enabling processing of Turbo interrupts
drm/i915/skl: Updated the i915_frequency_info debugfs function
drm/i915: Simplify the way BC bifurcation state consistency is kept
drm/i915/skl: Updated the act_freq_mhz_show sysfs function
drm/i915/skl: Updated the gen9_enable_rps function
drm/i915/skl: Updated the gen6_rps_limits function
drm/i915/skl: Restructured the gen6_set_rps_thresholds function
drm/i915/skl: Updated the gen6_set_rps function
drm/i915/skl: Updated the gen6_init_rps_frequencies function
...
Pull networking fixes from David Miller:
1) Validate iov ranges before feeding them into iov_iter_init(), from
Al Viro.
2) We changed copy_from_msghdr_from_user() to zero out the msg_namelen
is a NULL pointer is given for the msg_name. Do the same in the
compat code too. From Catalin Marinas.
3) Fix partially initialized tuples in netfilter conntrack helper, from
Ian Wilson.
4) Missing continue; statement in nft_hash walker can lead to crashes,
from Herbert Xu.
5) tproxy_tg6_check looks for IP6T_INV_PROTO in ->flags instead of
->invflags, fix from Pablo Neira Ayuso.
6) Incorrect memory account of TCP FINs can result in negative socket
memory accounting values. Fix from Josh Hunt.
7) Don't allow virtual functions to enable VLAN promiscuous mode in
be2net driver, from Vasundhara Volam.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
netfilter: nft_compat: set IP6T_F_PROTO flag if protocol is set
cx82310_eth: wait for firmware to become ready
net: validate the range we feed to iov_iter_init() in sys_sendto/sys_recvfrom
net: compat: Update get_compat_msghdr() to match copy_msghdr_from_user() behaviour
be2net: use PCI MMIO read instead of config read for errors
be2net: restrict MODIFY_EQ_DELAY cmd to a max of 8 EQs
be2net: Prevent VFs from enabling VLAN promiscuous mode
tcp: fix tcp fin memory accounting
ipv6: fix backtracking for throw routes
net: ethernet: pcnet32: Setup the SRAM and NOUFLO on Am79C97{3, 5}
ipv6: call ipv6_proxy_select_ident instead of ipv6_select_ident in udp6_ufo_fragment
netfilter: xt_TPROXY: fix invflags check in tproxy_tg6_check()
netfilter: restore rule tracing via nfnetlink_log
netfilter: nf_tables: allow to change chain policy without hook if it exists
netfilter: Fix potential crash in nft_hash walker
netfilter: Zero the tuple in nfnl_cthelper_parse_tuple()
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for your net tree,
they are:
1) Fix missing initialization of tuple structure in nfnetlink_cthelper
to avoid mismatches when looking up to attach userspace helpers to
flows, from Ian Wilson.
2) Fix potential crash in nft_hash when we hit -EAGAIN in
nft_hash_walk(), from Herbert Xu.
3) We don't need to indicate the hook information to update the
basechain default policy in nf_tables.
4) Restore tracing over nfnetlink_log due to recent rework to
accomodate logging infrastructure into nf_tables.
5) Fix wrong IP6T_INV_PROTO check in xt_TPROXY.
6) Set IP6T_F_PROTO flag in nft_compat so we can use SYNPROXY6 and
REJECT6 from xt over nftables.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull SCSI target fixes from Nicholas Bellinger:
"Here are current target-pending fixes for v4.0-rc5 code that have made
their way into the queue over the last weeks.
The fixes this round include:
- Fix long-standing iser-target logout bug related to early
conn_logout_comp completion, resulting in iscsi_conn use-after-tree
OOpsen. (Sagi + nab)
- Fix long-standing tcm_fc bug in ft_invl_hw_context() failure
handing for DDP hw offload. (DanC)
- Fix incorrect use of unprotected __transport_register_session() in
tcm_qla2xxx + other single local se_node_acl fabrics. (Bart)
- Fix reference leak in target_submit_cmd() -> target_get_sess_cmd()
for ack_kref=1 failure path. (Bart)
- Fix pSCSI backend ->get_device_type() statistics OOPs with
un-configured device. (Olaf + nab)
- Fix virtual LUN=0 target_configure_device failure OOPs at modprobe
time. (Claudio + nab)
- Fix FUA write false positive failure regression in v4.0-rc1 code.
(Christophe Vu-Brugier + HCH)"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
target: do not reject FUA CDBs when write cache is enabled but emulate_write_cache is 0
target: Fix virtual LUN=0 target_configure_device failure OOPs
target/pscsi: Fix NULL pointer dereference in get_device_type
tcm_fc: missing curly braces in ft_invl_hw_context()
target: Fix reference leak in target_get_sess_cmd() error path
loop/usb/vhost-scsi/xen-scsiback: Fix use of __transport_register_session
tcm_qla2xxx: Fix incorrect use of __transport_register_session
iscsi-target: Avoid early conn_logout_comp for iser connections
Revert "iscsi-target: Avoid IN_LOGOUT failure case for iser-target"
target: Disallow changing of WRITE cache/FUA attrs after export
Pull devicemapper fixes from Mike Snitzer:
"A handful of stable fixes for DM:
- fix thin target to always zero-fill reads to unprovisioned blocks
- fix to interlock device destruction's suspend from internal
suspends
- fix 2 snapshot exception store handover bugs
- fix dm-io to cope with DISCARD and WRITE_SAME capabilities changing"
* tag 'dm-4.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm io: deal with wandering queue limits when handling REQ_DISCARD and REQ_WRITE_SAME
dm snapshot: suspend merging snapshot when doing exception handover
dm snapshot: suspend origin when doing exception handover
dm: hold suspend_lock while suspending device during device deletion
dm thin: fix to consistently zero-fill reads to unprovisioned blocks
Currently there are only two "tools" that can be specified by a multi-touch
driver: MT_TOOL_FINGER and MT_TOOL_PEN. In working with Elan (The touch
vendor) and discussing their next-gen devices it seems that it will be
useful to have more tools so that their devices can give the upper layers
of the stack hints as to what is touching the sensor.
In particular they have new experimental firmware that can better
differentiate between palms vs fingertips and would like to plumb a patch
so that we can use their hints in higher-level gesture soft- ware. The
firmware on the device can reasonably do a better job of palm detection
because it has access to all of the raw sensor readings as opposed to just
the width/pressure/etc that are exposed by the driver. As such, the
firmware can characterize what a palm looks like in much finer-grained
detail and this change would allow such a device to share its findings with
the kernel.
Signed-off-by: Charlie Mooney <charliemooney@chromium.org>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Backmerge because of numerous and interleaving conflicts and git
rerere getting confused a bit too often.
Conflicts:
drivers/gpu/drm/i915/intel_display.c
All conflicts are because of -next patches backported to -fixes, so
just go with the code in -next.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
A check that rejects a CDB with FUA bit set if no write cache is
emulated was added by the following commit:
fde9f50 target: Add sanity checks for DPO/FUA bit usage
The condition is as follows:
if (!dev->dev_attrib.emulate_fua_write ||
!dev->dev_attrib.emulate_write_cache)
However, this check is wrong if the backend device supports WCE but
"emulate_write_cache" is disabled.
This patch uses se_dev_check_wce() (previously named
spc_check_dev_wce) to invoke transport->get_write_cache() if the
device has a write cache or check the "emulate_write_cache" attribute
otherwise.
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Pull pin control fixes from Linus Walleij:
"Here is a slew of pin control fixes I've accumulated for the v4.0
kernel. Nothing special, just driver fixes (mainly embedded Intel it
seems) and a misunderstanding regarding the stub functions was
reverted:
- Fix up consumer return values on pin control stubs.
- Four patches fixing up the interrupt handling and sleep context
save in the Baytrail driver.
- Make default output directions work properly in the Cherryview
driver.
- Fix interrupt locking in the AT91 driver.
- Fix setting interrupt generating lines as input in the sunxi
driver"
* tag 'pinctrl-v4.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: sun4i: GPIOs configured as irq must be set to input before reading
pinctrl: at91: move lock/unlock_as_irq calls into request/release
pinctrl: update direction_output function of cherryview driver
pinctrl: baytrail: Save pin context over system sleep
pinctrl: baytrail: Rework interrupt handling
pinctrl: baytrail: Clear interrupt triggering from pins that are in GPIO mode
pinctrl: baytrail: Relax GPIO request rules
Revert "pinctrl: consumer: use correct retval for placeholder functions"
Pull networking fixes from David Miller:
1) Fix packet header offset calculation in _decode_session6(), from
Hajime Tazaki.
2) Fix route leak in error paths of xfrm_lookup(), from Huaibin Wang.
3) Be sure to clear state properly when scans fail in iwlwifi mvm code,
from Luciano Coelho.
4) iwlwifi tries to stop scans that aren't actually running, also from
Luciano Coelho.
5) mac80211 should drop mesh frames that are not encrypted, fix from
Bob Copeland.
6) Add new device ID to b43 wireless driver for BCM432228 chips, from
Rafał Miłecki.
7) Fix accidental addition of members after variable sized array in
struct tc_u_hnode, from WANG Cong.
8) Don't re-enable interrupts until after we call napi_complete() in
ibmveth and WIZnet drivers, frm Yongbae Park.
9) Fix regression in vlan tag handling of fec driver, from Fugang Duan.
10) If a network namespace change fails during rtnl_newlink(), we don't
unwind the device registry properly.
11) Fix two TCP regressions, from Neal Cardwell:
- Don't allow snd_cwnd_cnt to accumulate huge values due to missing
test in tcp_cong_avoid_ai().
- Restore CUBIC back to advancing cwnd by 1.5x packets per RTT.
12) Fix performance regression in xne-netback involving push TX
notifications, from David Vrabel.
13) __skb_tstamp_tx() can be called with a NULL sk pointer, do not
dereference blindly. From Willem de Bruijn.
14) Fix potential stack overflow in RDS protocol stack, from Arnd
Bergmann.
15) VXLAN_VID_MASK used incorrectly in new remote checksum offload
support of VXLAN driver. Fix from Alexey Kodanev.
16) Fix too small netlink SKB allocation in inet_diag layer, from Eric
Dumazet.
17) ieee80211_check_combinations() does not count interfaces correctly,
from Andrei Otcheretianski.
18) Hardware feature determination in bxn2x driver references a piece of
software state that actually isn't initialized yet, fix from Michal
Schmidt.
19) inet_csk_wait_for_connect() needs a sched_annotate_sleep()
annoation, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (56 commits)
Revert "net: cx82310_eth: use common match macro"
net/mlx4_en: Set statistics bitmap at port init
IB/mlx4: Saturate RoCE port PMA counters in case of overflow
net/mlx4_en: Fix off-by-one in ethtool statistics display
IB/mlx4: Verify net device validity on port change event
act_bpf: allow non-default TC_ACT opcodes as BPF exec outcome
Revert "smc91x: retrieve IRQ and trigger flags in a modern way"
inet: Clean up inet_csk_wait_for_connect() vs. might_sleep()
ip6_tunnel: fix error code when tunnel exists
netdevice.h: fix ndo_bridge_* comments
bnx2x: fix encapsulation features on 57710/57711
mac80211: ignore CSA to same channel
nl80211: ignore HT/VHT capabilities without QoS/WMM
mac80211: ask for ECSA IE to be considered for beacon parse CRC
mac80211: count interfaces correctly for combination checks
isdn: icn: use strlcpy() when parsing setup options
rxrpc: bogus MSG_PEEK test in rxrpc_recvmsg()
caif: fix MSG_OOB test in caif_seqpkt_recvmsg()
bridge: reset bridge mtu after deleting an interface
can: kvaser_usb: Fix tx queue start/stop race conditions
...
SAS controller has its own tag allocation, which doesn't directly match to ATA
tag, so SAS and SATA have different code path for ata tags. Originally we use
port->scsi_host (98bd4be1) to destinguish SAS controller, but libsas set
->scsi_host too, so we can't use it for the destinguish, we add a new flag for
this purpose.
Without this patch, the following oops can happen because scsi-mq uses
a host-wide tag map shared among all devices with some integer tag
values >= ATA_MAX_QUEUE. These unexpectedly high tag values cause
__ata_qc_from_tag() to return NULL, which is then dereferenced in
ata_qc_new_init().
BUG: unable to handle kernel NULL pointer dereference at 0000000000000058
IP: [<ffffffff804fd46e>] ata_qc_new_init+0x3e/0x120
PGD 32adf0067 PUD 32adf1067 PMD 0
Oops: 0002 [#1] SMP DEBUG_PAGEALLOC
Modules linked in: iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi igb
i2c_algo_bit ptp pps_core pm80xx libsas scsi_transport_sas sg coretemp
eeprom w83795 i2c_i801
CPU: 4 PID: 1450 Comm: cydiskbench Not tainted 4.0.0-rc3 #1
Hardware name: Supermicro X8DTH-i/6/iF/6F/X8DTH, BIOS 2.1b 05/04/12
task: ffff8800ba86d500 ti: ffff88032a064000 task.ti: ffff88032a064000
RIP: 0010:[<ffffffff804fd46e>] [<ffffffff804fd46e>] ata_qc_new_init+0x3e/0x120
RSP: 0018:ffff88032a067858 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffff8800ba0d2230 RCX: 000000000000002a
RDX: ffffffff80505ae0 RSI: 0000000000000020 RDI: ffff8800ba0d2230
RBP: ffff88032a067868 R08: 0000000000000201 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800ba0d0000
R13: ffff8800ba0d2230 R14: ffffffff80505ae0 R15: ffff8800ba0d0000
FS: 0000000041223950(0063) GS:ffff88033e480000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000058 CR3: 000000032a0a3000 CR4: 00000000000006e0
Stack:
ffff880329eee758 ffff880329eee758 ffff88032a0678a8 ffffffff80502dad
ffff8800ba167978 ffff880329eee758 ffff88032bf9c520 ffff8800ba167978
ffff88032bf9c520 ffff88032bf9a290 ffff88032a0678b8 ffffffff80506909
Call Trace:
[<ffffffff80502dad>] ata_scsi_translate+0x3d/0x1b0
[<ffffffff80506909>] ata_sas_queuecmd+0x149/0x2a0
[<ffffffffa0046650>] sas_queuecommand+0xa0/0x1f0 [libsas]
[<ffffffff804ea544>] scsi_dispatch_cmd+0xd4/0x1a0
[<ffffffff804eb50f>] scsi_queue_rq+0x66f/0x7f0
[<ffffffff803e5098>] __blk_mq_run_hw_queue+0x208/0x3f0
[<ffffffff803e54b8>] blk_mq_run_hw_queue+0x88/0xc0
[<ffffffff803e5c74>] blk_mq_insert_request+0xc4/0x130
[<ffffffff803e0b63>] blk_execute_rq_nowait+0x73/0x160
[<ffffffffa0023fca>] sg_common_write+0x3da/0x720 [sg]
[<ffffffffa0025100>] sg_new_write+0x250/0x360 [sg]
[<ffffffffa0025feb>] sg_write+0x13b/0x450 [sg]
[<ffffffff8032ec91>] vfs_write+0xd1/0x1b0
[<ffffffff8032ee54>] SyS_write+0x54/0xc0
[<ffffffff80689932>] system_call_fastpath+0x12/0x17
tj: updated description.
Fixes: 12cb5ce101 ("libata: use blk taging")
Reported-and-tested-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
radeon requires this to get the slots for later filling
out a table on every transition.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows us to query certain registers from userspace
for profiling and harvest configuration. E.g., it can
be used by the GALLIUM_HUD for profiling the status of
various gfx blocks.
Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
