Add 2-bit tcpi_ecn_mode feild within tcp_info to indicate which ECN
mode is negotiated: ECN_MODE_DISABLED, ECN_MODE_RFC3168, ECN_MODE_ACCECN,
or ECN_MODE_PENDING. This is done by utilizing available bits from
tcpi_accecn_opt_seen (reduced from 16 bits to 2 bits) and
tcpi_accecn_fail_mode (reduced from 16 bits to 4 bits).
Also, an extra 24-bit tcpi_options2 field is identified to represent
newer options and connection features, as all 8 bits of tcpi_options
field have been used.
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Co-developed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-14-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Detect spurious retransmission of a previously sent ACK carrying the
AccECN option after the second retransmission. Since this might be caused
by the middlebox dropping ACK with options it does not recognize, disable
the sending of the AccECN option in all subsequent ACKs. This patch
follows Section 3.2.3.2.2 of AccECN spec (RFC9768), and a new field
(accecn_opt_sent_w_dsack) is added to indicate that an AccECN option was
sent with duplicate SACK info.
Also, a new AccECN option sending mode is added to tcp_ecn_option sysctl:
(TCP_ECN_OPTION_PERSIST), which ignores the AccECN fallback policy and
persistently sends AccECN option once it fits into TCP option space.
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-13-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
According to Section 3.2.2.1 of AccECN spec (RFC9768), if the Server
is in AccECN mode and in SYN-RCVD state, and if it receives a value of
zero on a pure ACK with SYN=0 and no SACK blocks, for the rest of the
connection the Server MUST NOT set ECT on outgoing packets and MUST
NOT respond to AccECN feedback. Nonetheless, as a Data Receiver it
MUST NOT disable AccECN feedback.
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-12-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For Accurate ECN, the first SYN/ACK sent by the TCP server shall set
the ACE flag (Table 1 of RFC9768) and the AccECN option to complete the
capability negotiation. However, if the TCP server needs to retransmit
such a SYN/ACK (for example, because it did not receive an ACK
acknowledging its SYN/ACK, or received a second SYN requesting AccECN
support), the TCP server retransmits the SYN/ACK without the AccECN
option. This is because the SYN/ACK may be lost due to congestion, or a
middlebox may block the AccECN option. Furthermore, if this retransmission
also times out, to expedite connection establishment, the TCP server
should retransmit the SYN/ACK with (AE,CWR,ECE) = (0,0,0) and without the
AccECN option, while maintaining AccECN feedback mode.
This complies with Section 3.2.3.2.2 of the AccECN spec RFC9768.
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-10-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
According to Sections 3.1.2 and 3.1.3 of AccECN spec (RFC9768).
In Section 3.1.2, it says an AccECN implementation has no need to
recognize or support the Server response labelled 'Nonce' or ECN-nonce
feedback more generally, as RFC 3540 has been reclassified as Historic.
AccECN is compatible with alternative ECN feedback integrity approaches
to the nonce. The SYN/ACK labelled 'Nonce' with (AE,CWR,ECE) = (1,0,1)
is reserved for future use. A TCP Client (A) that receives such a SYN/ACK
follows the procedure for forward compatibility given in Section 3.1.3.
Then in Section 3.1.3, it says if a TCP Client has sent a SYN requesting
AccECN feedback with (AE,CWR,ECE) = (1,1,1) then receives a SYN/ACK with
the currently reserved combination (AE,CWR,ECE) = (1,0,1) but it does not
have logic specific to such a combination, the Client MUST enable AccECN
mode as if the SYN/ACK onfirmed that the Server supported AccECN and as
if it fed back that the IP-ECN field on the SYN had arrived unchanged.
Fixes: 3cae34274c ("tcp: accecn: AccECN negotiation").
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-7-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When AccECN is not successfully negociated for a TCP flow, it defaults
fallback to classic ECN (RFC3168). However, L4S service will fallback
to non-ECN.
This patch enables congestion control module to control whether it
should not fallback to classic ECN after unsuccessful AccECN negotiation.
A new CA module flag (TCP_CONG_NO_FALLBACK_RFC3168) identifies this
behavior expected by the CA.
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-6-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Two flags for congestion control (CC) module are added in this patch
related to AccECN negotiation. First, a new flag (TCP_CONG_NEEDS_ACCECN)
defines that the CC expects to negotiate AccECN functionality using the
ECE, CWR and AE flags in the TCP header.
Second, during ECN negotiation, ECT(0) in the IP header is used. This
patch enables CC to control whether ECT(0) or ECT(1) should be used on
a per-segment basis. A new flag (TCP_CONG_ECT_1_NEGOTIATION) defines the
expected ECT value in the IP header by the CA when not-yet initialized
for the connection.
The detailed AccECN negotiaotn can be found in IETF RFC9768.
Co-developed-by: Olivier Tilmans <olivier.tilmans@nokia.com>
Signed-off-by: Olivier Tilmans <olivier.tilmans@nokia.com>
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-5-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With CONFIG_MITIGATION_RETPOLINE=y dst_mtu() is a bit fat,
because it is generic.
Indeed, clang does not always inline it.
Add dst4_mtu() and dst6_mtu() helpers for callers that
expect either ipv4_mtu() or ip6_mtu() to be called.
These helpers are always inlined.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260130210303.3888261-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With CONFIG_STACKPROTECTOR_STRONG=y, it is better to avoid passing
a pointer to an automatic variable.
Change these exported functions to return 'u8 proto'
instead of void.
- ipv6_push_nfrag_opts()
- ipv6_push_frag_opts()
For instance, replace
ipv6_push_frag_opts(skb, opt, &proto);
with:
proto = ipv6_push_frag_opts(skb, opt, proto);
Note that even after this change, ip6_xmit() has to use a stack canary
because of @first_hop variable.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260130210303.3888261-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By default, when a kmem_cache is created with SLAB_TYPESAFE_BY_RCU,
slub has to use extra storage for the freelist pointer after each
object, because slub assumes that any bit in the object
can be used by RCU readers.
Because proto_register() is also using SLAB_HWCACHE_ALIGN,
this forces slub to use one extra cache line per object.
We can instead put the slub freelist anywhere in the object,
granted the concurrent RCU readers are not supposed to
use the pointer value.
Add a new (struct sock)sk_freeptr field, in an union
with sk_rcu: No RCU readers would need to look at sk_rcu,
which is only used at free phase.
Tested:
grep . /sys/kernel/slab/TCP/{object_size,slab_size,objs_per_slab}
grep . /sys/kernel/slab/TCPv6/{object_size,slab_size,objs_per_slab}
Before:
/sys/kernel/slab/TCP/object_size:2368
/sys/kernel/slab/TCP/slab_size:2432
/sys/kernel/slab/TCP/objs_per_slab:13
/sys/kernel/slab/TCPv6/object_size:2496
/sys/kernel/slab/TCPv6/slab_size:2560
/sys/kernel/slab/TCPv6/objs_per_slab:12
After this patch, we can pack one more TCPv6 object per slab,
and object_size == slab_size.
/sys/kernel/slab/TCP/object_size:2368
/sys/kernel/slab/TCP/slab_size:2368
/sys/kernel/slab/TCP/objs_per_slab:13
/sys/kernel/slab/TCPv6/object_size:2496
/sys/kernel/slab/TCPv6/slab_size:2496
/sys/kernel/slab/TCPv6/objs_per_slab:13
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260129153458.4163797-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Johannes Berg says:
====================
Another fairly large set of changes, notably:
- cfg80211/mac80211
- most of EPPKE/802.1X over auth frames support
- additional FTM capabilities
- split up drop reasons better, removing generic RX_DROP
- NAN cleanups/fixes
- ath11k:
- support for Channel Frequency Response measurement
- ath12k:
- support for the QCC2072 chipset
- iwlwifi:
- partial NAN support
- UNII-9 support
- some UHR/802.11bn FW APIs
- remove most of MLO/EHT from iwlmvm
(such devices use iwlmld)
- rtw89:
- preparations for RTL8922DE support
* tag 'wireless-next-2026-01-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (184 commits)
wifi: iwlegacy: add missing mutex protection in il4965_store_tx_power()
wifi: iwlegacy: add missing mutex protection in il3945_store_measurement()
wifi: mac80211: use u64_stats_t with u64_stats_sync properly
wifi: p54: Fix memory leak in p54_beacon_update()
wifi: cfg80211: treat deprecated INDOOR_SP_AP_OLD control value as LPI mode
wifi: rtw88: sdio: Migrate to use sdio specific shutdown function
wifi: rsi: sdio: Migrate to use sdio specific shutdown function
sdio: Provide a bustype shutdown function
wifi: nl80211/cfg80211: support operating as RSTA in PMSR FTM request
wifi: nl80211/cfg80211: add negotiated burst period to FTM result
wifi: nl80211/cfg80211: clarify periodic FTM parameters for non-EDCA based ranging
wifi: nl80211/cfg80211: add new FTM capabilities
wifi: iwlwifi: rename struct iwl_mcc_allowed_ap_type_cmd::offset_map
wifi: iwlwifi: mvm: Remove link_id from time_events
wifi: iwlwifi: mld: change cluster_id type to u8 array
wifi: iwlwifi: support V13 of iwl_lari_config_change_cmd
wifi: iwlwifi: split bios_value_u32 to separate the header
wifi: iwlwifi: uefi: cache the DSM functions
wifi: iwlwifi: acpi: cache the DSM functions
wifi: iwlwifi: mvm: Cleanup MLO code
...
====================
Link: https://patch.msgid.link/20260129110136.176980-39-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fl6_update_dst() is called for every TCP (and others) transmit,
and is a nop for common cases.
Split it in two parts :
1) fl6_update_dst() inline helper, small and fast.
2) __fl6_update_dst() for the exception, out of line.
Small size increase to get better TX performance.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 2/2 grow/shrink: 8/0 up/down: 296/-125 (171)
Function old new delta
__fl6_update_dst - 104 +104
rawv6_sendmsg 2244 2284 +40
udpv6_sendmsg 3013 3043 +30
tcp_v6_connect 1514 1534 +20
cookie_v6_check 1501 1519 +18
ip6_datagram_dst_update 673 690 +17
inet6_sk_rebuild_header 499 516 +17
inet6_csk_route_socket 507 524 +17
inet6_csk_route_req 343 360 +17
__pfx___fl6_update_dst - 16 +16
__pfx_fl6_update_dst 16 - -16
fl6_update_dst 109 - -109
Total: Before=22570304, After=22570475, chg +0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260128185548.3738781-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This attempts to proper track outstanding request by using struct ida
and allocating from it in l2cap_get_ident using ida_alloc_range which
would reuse ids as they are free, then upon completion release
the id using ida_free.
This fixes the qualification test case L2CAP/COS/CED/BI-29-C which
attempts to check if the host stack is able to work after 256 attempts
to connect which requires Ident field to use the full range of possible
values in order to pass the test.
Link: https://github.com/bluez/bluez/issues/1829
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
This renames the PHY fields in bt_iso_io_qos to PHYs (plural) since it
represents a bitfield where multiple PHYs can be set and make the same
change also to HCI_OP_LE_SET_CIG_PARAMS since both c_phy and p_phy
fields are bitfields.
This also fixes the assumption that hci_evt_le_cis_established PHYs
fields are compatible with bt_iso_io_qos, they are not, the fields in
hci_evt_le_cis_established represent just a single PHY value so they
need to be converted to bitfield when set in bt_iso_io_qos.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables client to use setsockopt(BT_PHY) to set the connection
packet type/PHY:
Example setting BT_PHY_BR_1M_1SLOT:
< HCI Command: Change Conne.. (0x01|0x000f) plen 4
Handle: 1 Address: 00:AA:01:01:00:00 (Intel Corporation)
Packet type: 0x331e
2-DH1 may not be used
3-DH1 may not be used
DM1 may be used
DH1 may be used
2-DH3 may not be used
3-DH3 may not be used
2-DH5 may not be used
3-DH5 may not be used
> HCI Event: Command Status (0x0f) plen 4
Change Connection Packet Type (0x01|0x000f) ncmd 1
Status: Success (0x00)
> HCI Event: Connection Packet Typ.. (0x1d) plen 5
Status: Success (0x00)
Handle: 1 Address: 00:AA:01:01:00:00 (Intel Corporation)
Packet type: 0x331e
2-DH1 may not be used
3-DH1 may not be used
DM1 may be used
DH1 may be used
2-DH3 may not be used
3-DH3 may not be used
2-DH5 may not be used
Example setting BT_PHY_LE_1M_TX and BT_PHY_LE_1M_RX:
< HCI Command: LE Set PHY (0x08|0x0032) plen 7
Handle: 1 Address: 00:AA:01:01:00:00 (Intel Corporation)
All PHYs preference: 0x00
TX PHYs preference: 0x01
LE 1M
RX PHYs preference: 0x01
LE 1M
PHY options preference: Reserved (0x0000)
> HCI Event: Command Status (0x0f) plen 4
LE Set PHY (0x08|0x0032) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 6
LE PHY Update Complete (0x0c)
Status: Success (0x00)
Handle: 1 Address: 00:AA:01:01:00:00 (Intel Corporation)
TX PHY: LE 1M (0x01)
RX PHY: LE 1M (0x01)
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
1. Implement LE Event Mask to include events required for
LE Channel Sounding
2. Enable Channel Sounding feature bit in the
LE Host Supported Features command
3. Define HCI command and event structures necessary for
LE Channel Sounding functionality
Signed-off-by: Naga Bhavani Akella <naga.akella@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
conn->le_{tx,rx}_phy is not actually a bitfield as it set by
HCI_EV_LE_PHY_UPDATE_COMPLETE it is actually correspond to the current
PHY in use not what is supported by the controller, so this introduces
different fields (conn->le_{tx,rx}_def_phys) to track what PHYs are
supported by the connection.
Fixes: eab2404ba7 ("Bluetooth: Add BT_PHY socket option")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The current implementation uses a linear list to find queued packets by
ID when processing verdicts from userspace. With large queue depths and
out-of-order verdicting, this O(n) lookup becomes a significant
bottleneck, causing userspace verdict processing to dominate CPU time.
Replace the linear search with a hash table for O(1) average-case
packet lookup by ID. A global rhashtable spanning all network
namespaces attributes hash bucket memory to kernel but is subject to
fixed upper bound.
Signed-off-by: Scott Mitchell <scott.k.mitch1@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
tcp_rack_advance() is called from tcp_ack() and tcp_sacktag_one().
Moving it to tcp_input.c allows the compiler to inline it and save
both space and cpu cycles in TCP fast path.
$ scripts/bloat-o-meter -t vmlinux.1 vmlinux.2
add/remove: 0/2 grow/shrink: 1/1 up/down: 98/-132 (-34)
Function old new delta
tcp_ack 5741 5839 +98
tcp_sacktag_one 407 395 -12
__pfx_tcp_rack_advance 16 - -16
tcp_rack_advance 104 - -104
Total: Before=22572680, After=22572646, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260127032147.3498272-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_rack_update_reo_wnd() is called only once from tcp_ack()
Move it to tcp_input.c so that it can be inlined by the compiler
to save space and cpu cycles.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/2 grow/shrink: 1/0 up/down: 110/-153 (-43)
Function old new delta
tcp_ack 5631 5741 +110
__pfx_tcp_rack_update_reo_wnd 16 - -16
tcp_rack_update_reo_wnd 137 - -137
Total: Before=22572723, After=22572680, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260127032147.3498272-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add netns logic to vsock core. Additionally, modify transport hook
prototypes to be used by later transport-specific patches (e.g.,
*_seqpacket_allow()).
Namespaces are supported primarily by changing socket lookup functions
(e.g., vsock_find_connected_socket()) to take into account the socket
namespace and the namespace mode before considering a candidate socket a
"match".
This patch also introduces the sysctl /proc/sys/net/vsock/ns_mode to
report the mode and /proc/sys/net/vsock/child_ns_mode to set the mode
for new namespaces.
Add netns functionality (initialization, passing to transports, procfs,
etc...) to the af_vsock socket layer. Later patches that add netns
support to transports depend on this patch.
This patch changes the allocation of random ports for connectible vsocks
in order to avoid leaking the random port range starting point to other
namespaces.
dgram_allow(), stream_allow(), and seqpacket_allow() callbacks are
modified to take a vsk in order to perform logic on namespace modes. In
future patches, the net will also be used for socket
lookups in these functions.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-1-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
1) Inline this small helper to reduce code size and decrease cpu costs.
2) Constify its argument.
3) Move it to include/net/netmem.h, as a prereq for the following patch.
$ scripts/bloat-o-meter -t vmlinux.2 vmlinux.3
add/remove: 0/2 grow/shrink: 0/4 up/down: 0/-158 (-158)
Function old new delta
validate_xmit_skb 866 857 -9
__pfx_net_is_devmem_iov 16 - -16
net_is_devmem_iov 22 - -22
get_netmem 152 130 -22
put_netmem 140 114 -26
tcp_recvmsg_locked 3860 3797 -63
Total: Before=22566015, After=22565857, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260122045720.1221017-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I imagine (tm) that as the number of per-queue configuration
options grows some of them may conflict for certain drivers.
While the drivers can obviously do all the validation locally
doing so is fairly inconvenient as the config is fed to drivers
piecemeal via different ops (for different params and NIC-wide
vs per-queue).
Add a centralized callback for validating the queue config
in queue ops. The callback gets invoked before memory provider
is installed, and in the future should also be called when ring
params are modified.
The validation is done after each layer of configuration.
Since we can't fail MP un-binding we must make sure that
the config is valid both before and after MP overrides are
applied. This is moot for now since the set of MP and device
configs are disjoint. It will matter significantly in the future,
so adding it now so that we don't forget..
Link: https://patch.msgid.link/20260122005113.2476634-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We should follow the prepare/commit approach for queue configuration.
The qcfg struct should be added to dev->cfg rather than directly to
queue objects so that we can clone and discard the pending config
easily.
Remove the qcfg in struct netdev_rx_queue, and switch remaining callers
to netdev_queue_config(). netdev_queue_config() will construct the qcfg
on the fly based on device defaults and state of the queue.
ndo_default_qcfg becomes optional because having the callback itself
does not have any meaningful semantics to us.
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://patch.msgid.link/20260122005113.2476634-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We may choose to extend or reimplement the logic which renders
the per-queue config. The drivers should not poke directly into
the queue state. Add a helper for drivers to use when they want
to query the config for a specific queue.
Link: https://patch.msgid.link/20260122005113.2476634-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
GSO partial features for tunnels do not require any kind of support from
the underlying device: we can safely add them to the geneve UDP tunnel.
The only point of attention is the skb required features propagation in
the device xmit op: partial features must be stripped, except for
UDP_TUNNEL*.
Keep partial features disabled by default.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/d851ca8e928cf05d68310bcbaeaa5e9e0b01e058.1769011015.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_rate_check_app_limited() is used from tcp_sendmsg_locked()
fast path and from other callers.
Move it to tcp.c so that it can be inlined in tcp_sendmsg_locked().
Small increase of code, for better TCP performance.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/0 grow/shrink: 1/0 up/down: 87/0 (87)
Function old new delta
tcp_sendmsg_locked 4217 4304 +87
Total: Before=22566462, After=22566549, chg +0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20260121095923.3134639-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This function is called from one caller only, in TCP fast path.
Move it to tcp_input.c so that compiler can inline it.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/2 grow/shrink: 1/0 up/down: 226/-300 (-74)
Function old new delta
tcp_ack 5405 5631 +226
__pfx_tcp_rate_gen 16 - -16
tcp_rate_gen 284 - -284
Total: Before=22566536, After=22566462, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20260121095923.3134639-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The pipapo set backend is the only user of the .abort interface so far.
To speed up pipapo abort path, removals are skipped.
The follow up patch updates the rbtree to use to build an array of
ordered elements, then use binary search. This needs a new .abort
interface but, unlike pipapo, it also need to undo/remove elements.
Add a flag and use it from the pipapo set backend.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Johannes Berg says:
====================
Another set of updates:
- various small fixes for ath10k/ath12k/mwifiex/rsi
- cfg80211 fix for HE bitrate overflow
- mac80211 fixes
- S1G beacon handling in scan
- skb tailroom handling for HW encryption
- CSA fix for multi-link
- handling of disabled links during association
* tag 'wireless-2026-11-22' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: cfg80211: ignore link disabled flag from userspace
wifi: mac80211: apply advertised TTLM from association response
wifi: mac80211: parse all TTLM entries
wifi: mac80211: don't increment crypto_tx_tailroom_needed_cnt twice
wifi: mac80211: don't perform DA check on S1G beacon
wifi: ath12k: Fix wrong P2P device link id issue
wifi: ath12k: fix dead lock while flushing management frames
wifi: ath12k: Fix scan state stuck in ABORTING after cancel_remain_on_channel
wifi: ath12k: cancel scan only on active scan vdev
wifi: mwifiex: Fix a loop in mwifiex_update_ampdu_rxwinsize()
wifi: mac80211: correctly check if CSA is active
wifi: cfg80211: Fix bitrate calculation overflow for HE rates
wifi: rsi: Fix memory corruption due to not set vif driver data size
wifi: ath12k: don't force radio frequency check in freq_to_idx()
wifi: ath12k: fix dma_free_coherent() pointer
wifi: ath10k: fix dma_free_coherent() pointer
====================
Link: https://patch.msgid.link/20260122110248.15450-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The rtnl lock might be locked, preventing ad_cond_set_peer_notif() from
acquiring the lock and updating send_peer_notif. This patch addresses
the issue by using a workqueue. Since updating send_peer_notif does
not require high real-time performance, such delayed updates are entirely
acceptable.
In fact, checking this value and using it in multiple places, all operations
are protected at the same time by rtnl lock, such as
- read send_peer_notif
- send_peer_notif--
- bond_should_notify_peers
By the way, rtnl lock is still required, when accessing bond.params.* for
updating send_peer_notif. In lacp mode, resetting send_peer_notif in
workqueue is safe, simple and effective way.
Additionally, this patch introduces bond_peer_notify_may_events(), which
is used to check whether an event should be sent. This function will be
used in both patch 1 and 2.
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Cc: Jason Xing <kerneljasonxing@gmail.com>
Suggested-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Tonghao Zhang <tonghao@bamaicloud.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/f95accb5db0b10ce3ed2f834fc70f716c9abbb9c.1768709239.git.tonghao@bamaicloud.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Florian Westphal says:
====================
Subject: netfilter: updates for net-next
1) Speed up nftables transactions after earlier transaction failed.
Due to a (harmeless) bug we remained in slow paranoia mode until
a successful transaction completes.
2) Allow generic tracker to resolve clashes, this avoids very rare
packet drops. From Yuto Hamaguchi.
3) Increase the cleanup budget to 64 entries in nf_conncount to reap
more entries in one go, from Fernando Fernandez Mancera.
4) Allow icmp trackers to resolve clashes, this avoids very rare
initial packet drop with test cases that have high-frequency pings.
After this all trackers except tcp and sctp allow clash resolution.
5) Disentangle netfilter headers, don't include nftables/xtables headers
in subsystems that are unrelated.
6) Don't rely on implicit includes coming from nf_conntrack_proto_gre.h.
7) Allow nfnetlink_queue nfq instance struct to get accounted via memcg,
from Scott Mitchell.
8) Reject bogus xt target/match data upfront via netlink policiy in
nft_compat interface rather than relying on x_tables API to do it.
9) Fix nf_conncount breakage when trying to limit loopback flows via
prerouting rule, from Fernando Fernandez Mancera.
This is a recent breakage but not seen as urgent enough to rush this
via net tree at this late stage in development cycle.
10) Fix a possible off-by-one when parsing tcp option in xtables tcpmss
match. Also handled via -next due to late stage in development
cycle.
* tag 'nf-next-26-01-20' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: xt_tcpmss: check remaining length before reading optlen
netfilter: nf_conncount: fix tracking of connections from localhost
netfilter: nft_compat: add more restrictions on netlink attributes
netfilter: nfnetlink_queue: nfqnl_instance GFP_ATOMIC -> GFP_KERNEL_ACCOUNT allocation
netfilter: nf_conntrack: don't rely on implicit includes
netfilter: don't include xt and nftables.h in unrelated subsystems
netfilter: nf_conntrack: enable icmp clash support
netfilter: nf_conncount: increase the connection clean up limit to 64
netfilter: nf_conntrack: Add allow_clash to generic protocol handler
netfilter: nf_tables: reset table validation state on abort
====================
Link: https://patch.msgid.link/20260120191803.22208-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
FDO/LTO are unable to inline tcp6_gro_receive() from ipv6_gro_receive()
Make sure tcp6_check_fraglist_gro() is only called only when needed,
so that compiler can leave it out-of-line.
$ scripts/bloat-o-meter -t vmlinux.1 vmlinux.2
add/remove: 2/0 grow/shrink: 3/1 up/down: 1123/-253 (870)
Function old new delta
ipv6_gro_receive 1069 1846 +777
tcp6_check_fraglist_gro - 272 +272
ipv6_offload_init 218 274 +56
__pfx_tcp6_check_fraglist_gro - 16 +16
ipv6_gro_complete 433 435 +2
tcp6_gro_receive 959 706 -253
Total: Before=22592662, After=22593532, chg +0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260120164903.1912995-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
