Introduce minimal tests. These can serve as simple illustrative
examples, and as templates when writing new tests.
When adding new cases, it can be easier to extend an existing base
test rather than start from scratch. The existing tests all focus on
real, often non-trivial, features. It is not obvious which to take as
starting point, and arguably none really qualify.
Add two tests
- the client test performs the active open and initial close
- the server test implements the passive open and final close
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260105172529.3514786-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test currently SKIPs if the symmetric RSS xfrm is not enabled
by default. This leads to spurious SKIPs in the Intel CI reporting
results to NIPA.
Testing on CX7:
# ./drivers/net/hw/rss_input_xfrm.py
TAP version 13
1..2
ok 1 rss_input_xfrm.test_rss_input_xfrm_ipv4 # SKIP Test requires IPv4 connectivity
# Sym input xfrm already enabled: {'sym-or-xor'}
ok 2 rss_input_xfrm.test_rss_input_xfrm_ipv6
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:1 error:0
# ethtool -X eth0 xfrm none
# ./drivers/net/hw/rss_input_xfrm.py
TAP version 13
1..2
ok 1 rss_input_xfrm.test_rss_input_xfrm_ipv4 # SKIP Test requires IPv4 connectivity
# Sym input xfrm configured: {'sym-or-xor'}
ok 2 rss_input_xfrm.test_rss_input_xfrm_ipv6
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:1 error:0
Link: https://patch.msgid.link/20260104184600.795280-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IPv6 addresses with the same scope are returned in reverse insertion
order, unlike IPv4. For example, when adding a -> b -> c, the list is
reported as c -> b -> a, while IPv4 preserves the original order.
This behavior causes:
a. When using `ip -6 a save` and `ip -6 a restore`, addresses are restored
in the opposite order from which they were saved. See example below
showing addresses added as 1::1, 1::2, 1::3 but displayed and saved
in reverse order.
# ip -6 a a 1::1 dev x
# ip -6 a a 1::2 dev x
# ip -6 a a 1::3 dev x
# ip -6 a s dev x
2: x: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
inet6 1::3/128 scope global tentative
valid_lft forever preferred_lft forever
inet6 1::2/128 scope global tentative
valid_lft forever preferred_lft forever
inet6 1::1/128 scope global tentative
valid_lft forever preferred_lft forever
# ip -6 a save > dump
# ip -6 a d 1::1 dev x
# ip -6 a d 1::2 dev x
# ip -6 a d 1::3 dev x
# ip a d ::1 dev lo
# ip a restore < dump
# ip -6 a s dev x
2: x: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
inet6 1::1/128 scope global tentative
valid_lft forever preferred_lft forever
inet6 1::2/128 scope global tentative
valid_lft forever preferred_lft forever
inet6 1::3/128 scope global tentative
valid_lft forever preferred_lft forever
# ip a showdump < dump
if1:
inet6 ::1/128 scope host proto kernel_lo
valid_lft forever preferred_lft forever
if2:
inet6 1::3/128 scope global tentative
valid_lft forever preferred_lft forever
if2:
inet6 1::2/128 scope global tentative
valid_lft forever preferred_lft forever
if2:
inet6 1::1/128 scope global tentative
valid_lft forever preferred_lft forever
b. Addresses in pasta to appear in reversed order compared to host
addresses.
The ipv6 addresses were added in reverse order by commit e55ffac601
("[IPV6]: order addresses by scope"), then it was changed by commit
502a2ffd73 ("ipv6: convert idev_list to list macros"), and restored by
commit b54c9b98bb ("ipv6: Preserve pervious behavior in
ipv6_link_dev_addr()."). However, this reverse ordering within the same
scope causes inconsistency with IPv4 and the issues described above.
This patch aligns IPv6 address ordering with IPv4 for consistency
by changing the comparison from >= to > when inserting addresses
into the address list. Also updates the ioam6 selftest to reflect
the new address ordering behavior. Combine these two changes into
one patch for bisectability.
Link: https://bugs.passt.top/show_bug.cgi?id=175
Suggested-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Yumei Huang <yuhuang@redhat.com>
Acked-by: Justin Iurman <justin.iurman@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260104032357.38555-1-yuhuang@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Paolo Abeni:
"Including fixes from Bluetooth and WiFi. Notably this includes the fix
for the iwlwifi issue you reported.
Current release - regressions:
- core: avoid prefetching NULL pointers
- wifi:
- iwlwifi: implement settime64 as stub for MVM/MLD PTP
- mac80211: fix list iteration in ieee80211_add_virtual_monitor()
- handshake: fix null-ptr-deref in handshake_complete()
- eth: mana: fix use-after-free in reset service rescan path
Previous releases - regressions:
- openvswitch: avoid needlessly taking the RTNL on vport destroy
- dsa: properly keep track of conduit reference
- ipv4:
- fix error route reference count leak with nexthop objects
- fib: restore ECMP balance from loopback
- mptcp: ensure context reset on disconnect()
- bluetooth: fix potential UaF in btusb
- nfc: fix deadlock between nfc_unregister_device and
rfkill_fop_write
- eth:
- gve: defer interrupt enabling until NAPI registration
- i40e: fix scheduling in set_rx_mode
- macb: relocate mog_init_rings() callback from macb_mac_link_up()
to macb_open()
- rtl8150: fix memory leak on usb_submit_urb() failure
- wifi: 8192cu: fix tid out of range in rtl92cu_tx_fill_desc()
Previous releases - always broken:
- ip6_gre: make ip6gre_header() robust
- ipv6: fix a BUG in rt6_get_pcpu_route() under PREEMPT_RT
- af_unix: don't post cmsg for SO_INQ unless explicitly asked for
- phy: mediatek: fix nvmem cell reference leak in
mt798x_phy_calibration
- wifi: mac80211: discard beacon frames to non-broadcast address
- eth:
- iavf: fix off-by-one issues in iavf_config_rss_reg()
- stmmac: fix the crash issue for zero copy XDP_TX action
- team: fix check for port enabled when priority changes"
* tag 'net-6.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
ipv6: fix a BUG in rt6_get_pcpu_route() under PREEMPT_RT
net: rose: fix invalid array index in rose_kill_by_device()
net: enetc: do not print error log if addr is 0
net: macb: Relocate mog_init_rings() callback from macb_mac_link_up() to macb_open()
selftests: fib_test: Add test case for ipv4 multi nexthops
net: fib: restore ECMP balance from loopback
selftests: fib_nexthops: Add test cases for error routes deletion
ipv4: Fix reference count leak when using error routes with nexthop objects
net: usb: sr9700: fix incorrect command used to write single register
ipv6: BUG() in pskb_expand_head() as part of calipso_skbuff_setattr()
usbnet: avoid a possible crash in dql_completed()
gve: defer interrupt enabling until NAPI registration
net: stmmac: fix the crash issue for zero copy XDP_TX action
octeontx2-pf: fix "UBSAN: shift-out-of-bounds error"
af_unix: don't post cmsg for SO_INQ unless explicitly asked for
net: mana: Fix use-after-free in reset service rescan path
net: avoid prefetching NULL pointers
net: bridge: Describe @tunnel_hash member in net_bridge_vlan_group struct
net: nfc: fix deadlock between nfc_unregister_device and rfkill_fop_write
net: usb: asix: validate PHY address before use
...
Pull misc fixes from Andrew Morton:
"27 hotfixes. 12 are cc:stable, 18 are MM.
There's a patch series from Jiayuan Chen which fixes some
issues with KASAN and vmalloc. Apart from that it's the usual
shower of singletons - please see the respective changelogs
for details"
* tag 'mm-hotfixes-stable-2025-12-28-21-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (27 commits)
mm/ksm: fix pte_unmap_unlock of wrong address in break_ksm_pmd_entry
mm/page_owner: fix memory leak in page_owner_stack_fops->release()
mm/memremap: fix spurious large folio warning for FS-DAX
MAINTAINERS: notify the "Device Memory" community of memory hotplug changes
sparse: update MAINTAINERS info
mm/page_alloc: report 1 as zone_batchsize for !CONFIG_MMU
mm: consider non-anon swap cache folios in folio_expected_ref_count()
rust: maple_tree: rcu_read_lock() in destructor to silence lockdep
mm: memcg: fix unit conversion for K() macro in OOM log
mm: fixup pfnmap memory failure handling to use pgoff
tools/mm/page_owner_sort: fix timestamp comparison for stable sorting
selftests/mm: fix thread state check in uffd-unit-tests
kernel/kexec: fix IMA when allocation happens in CMA area
kernel/kexec: change the prototype of kimage_map_segment()
MAINTAINERS: add ABI headers to KHO and LIVE UPDATE
.mailmap: remove one of the entries for WangYuli
mm/damon/vaddr: fix missing pte_unmap_unlock in damos_va_migrate_pmd_entry()
MAINTAINERS: update one straggling entry for Bartosz Golaszewski
mm/page_alloc: change all pageblocks migrate type on coalescing
mm: leafops.h: correct kernel-doc function param. names
...
Pull sched_ext fixes from Tejun Heo:
- Fix uninitialized @ret on alloc_percpu() failure leading to
ERR_PTR(0)
- Fix PREEMPT_RT warning when bypass load balancer sends IPI to offline
CPU by using resched_cpu() instead of resched_curr()
- Fix comment referring to renamed function
- Update scx_show_state.py for scx_root and scx_aborting changes
* tag 'sched_ext-for-6.19-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
tools/sched_ext: update scx_show_state.py for scx_aborting change
tools/sched_ext: fix scx_show_state.py for scx_root change
sched_ext: Use the resched_cpu() to replace resched_curr() in the bypass_lb_node()
sched_ext: Fix some comments in ext.c
sched_ext: fix uninitialized ret on alloc_percpu() failure
Pull powerpc fixes from Madhavan Srinivasan:
- Fix for kexec warning due to SMT disable or partial SMT enabled
- Handle font bitmap pointer with reloc_offset to fix boot crash
- Fix to enable cpuidle state for Power11
- Couple of misc fixes
Thanks to Aboorva Devarajan, Aditya Bodkhe, Cedar Maxwell, Christian
Zigotzky, Christophe Leroy, Christophe Leroy (CS GROUP), Finn Thain,
Gopi Krishna Menon, Guenter Roeck, Jan Stancek, Joe Lawrence, Josh
Poimboeuf, Justin M. Forbes, Madadi Vineeth Reddy, Naveen N Rao (AMD),
Nysal Jan K.A., Sachin P Bappalige, Samir M, Sourabh Jain, Srikar
Dronamraju, and Stan Johnson
* tag 'powerpc-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32: Restore disabling of interrupts at interrupt/syscall exit
powerpc/powernv: Enable cpuidle state detection for POWER11
powerpc: Add reloc_offset() to font bitmap pointer used for bootx_printf()
powerpc/tools: drop `-o pipefail` in gcc check scripts
selftests/powerpc/pmu/: Add check_extended_reg_test to .gitignore
powerpc/kexec: Enable SMT before waking offline CPUs
Commit 48e1267773 ("sched_ext: Introduce scx_sched") introduced
scx_root and removed scx_ops, causing scx_show_state.py to fail when
searching for the 'scx_ops' object. [1]
Fix by using 'scx_root' instead, with NULL pointer handling.
[1]
# drgn -s vmlinux ./tools/sched_ext/scx_show_state.py
Traceback (most recent call last):
File "/root/.venv/bin/drgn", line 8, in <module>
sys.exit(_main())
~~~~~^^
File "/root/.venv/lib64/python3.14/site-packages/drgn/cli.py", line 625, in _main
runpy.run_path(
~~~~~~~~~~~~~~^
script_path, init_globals={"prog": prog}, run_name="__main__"
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
)
^
File "<frozen runpy>", line 287, in run_path
File "<frozen runpy>", line 98, in _run_module_code
File "<frozen runpy>", line 88, in _run_code
File "./tools/sched_ext/scx_show_state.py", line 30, in <module>
ops = prog['scx_ops']
~~~~^^^^^^^^^^^
_drgn.ObjectNotFoundError: could not find 'scx_ops'
Fixes: 48e1267773 ("sched_ext: Introduce scx_sched")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add #undef __user before and after including compiler_types.h to avoid
redefinition warnings when compiling with system headers that also
define __user. This allows tools/virtio to build without warnings.
Additionally, stub out __must_check
Created using Cursor CLI.
Message-ID: <56424ce95c72cb4957070a7cd3c3c40ad5addaee.1764873799.git.mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In the thread_state_get() function, the logic to find the thread's state
character was using `sizeof(header) - 1` to calculate the offset from the
"State:\t" string.
The `header` variable is a `const char *` pointer. `sizeof()` on a
pointer returns the size of the pointer itself, not the length of the
string literal it points to. This makes the code's behavior dependent on
the architecture's pointer size.
This bug was identified on a 32-bit ARM build (`gsi_tv_arm`) for Android,
running on an ARMv8-based device, compiled with Clang 19.0.1.
On this 32-bit architecture, `sizeof(char *)` is 4. The expression
`sizeof(header) - 1` resulted in an incorrect offset of 3, causing the
test to read the wrong character from `/proc/[tid]/status` and fail.
On 64-bit architectures, `sizeof(char *)` is 8, so the expression
coincidentally evaluates to 7, which matches the length of "State:\t".
This is why the bug likely remained hidden on 64-bit builds.
To fix this and make the code portable and correct across all
architectures, this patch replaces `sizeof(header) - 1` with
`strlen(header)`. The `strlen()` function correctly calculates the
string's length, ensuring the correct offset is always used.
Link: https://lkml.kernel.org/r/20251210091408.3781445-1-wakel@google.com
Fixes: f60b6634cd ("mm/selftests: add a test to verify mmap_changing race with -EAGAIN")
Signed-off-by: Wake Liu <wakel@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Bill Wendling <morbo@google.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When the selftest 'tap.c' is compiled with '-D_FORTIFY_SOURCE=3',
the strcpy() in rtattr_add_strsz() is replaced with a checked
version which causes the test to consistently fail when compiled
with toolchains for which this option is enabled by default.
TAP version 13
1..3
# Starting 3 tests from 1 test cases.
# RUN tap.test_packet_valid_udp_gso ...
*** buffer overflow detected ***: terminated
# test_packet_valid_udp_gso: Test terminated by assertion
# FAIL tap.test_packet_valid_udp_gso
not ok 1 tap.test_packet_valid_udp_gso
# RUN tap.test_packet_valid_udp_csum ...
*** buffer overflow detected ***: terminated
# test_packet_valid_udp_csum: Test terminated by assertion
# FAIL tap.test_packet_valid_udp_csum
not ok 2 tap.test_packet_valid_udp_csum
# RUN tap.test_packet_crash_tap_invalid_eth_proto ...
*** buffer overflow detected ***: terminated
# test_packet_crash_tap_invalid_eth_proto: Test terminated by assertion
# FAIL tap.test_packet_crash_tap_invalid_eth_proto
not ok 3 tap.test_packet_crash_tap_invalid_eth_proto
# FAILED: 0 / 3 tests passed.
# Totals: pass:0 fail:3 xfail:0 xpass:0 skip:0 error:0
A buffer overflow is detected by the fortified glibc __strcpy_chk()
since the __builtin_object_size() of `RTA_DATA(rta)` is incorrectly
reported as 1, even though there is ample space in its bounding
buffer `req`.
Additionally, given that IFLA_IFNAME also expects a null-terminated
string, callers of rtaddr_add_str{,sz}() could simply use the
rtaddr_add_strsz() variant. (which has been renamed to remove the
trailing `sz`) memset() has been used for this function since it
is unchecked and thus circumvents the issue discussed in the
previous paragraph.
Fixes: 2e64fe4624 ("selftests: add few test cases for tap driver")
Signed-off-by: Alice C. Munduruca <alice.munduruca@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251216170641.250494-1-alice.munduruca@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pull arm64 fixes from Catalin Marinas:
"Two left-over updates that could not go into -rc1 due to conflicts
with other series:
- Simplify checks in arch_kfence_init_pool() since
force_pte_mapping() already takes BBML2-noabort (break-before-make
Level 2 with no aborts generated) into account
- Remove unneeded SVE/SME fallback preserve/store handling in the
arm64 EFI. With the recent updates, the fallback path is only taken
for EFI runtime calls from hardirq or NMI contexts. In practice,
this only happens under panic/oops/emergency_restart() and no
restoring of the user state expected.
There's a corresponding lkdtm update to trigger a BUG() or panic()
from hardirq context together with a fixup not to confuse
clang/objtool about the control flow
GCS (guarded control stacks) fix: flush the GCS locking state on exec,
otherwise the new task will not be able to enable GCS (locked as
disabled)"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
lkdtm/bugs: Do not confuse the clang/objtool with busy wait loop
arm64/gcs: Flush the GCS locking state on exec
arm64/efi: Remove unneeded SVE/SME fallback preserve/store handling
lkdtm/bugs: Add cases for BUG and PANIC occurring in hardirq context
arm64: mm: Simplify check in arch_kfence_init_pool()
Pull x86 kvm fixes from Paolo Bonzini:
"x86 fixes. Everyone else is already in holiday mood apparently.
- Add a missing 'break' to fix param parsing in the rseq selftest
- Apply runtime updates to the _current_ CPUID when userspace is
setting CPUID, e.g. as part of vCPU hotplug, to fix a false
positive and to avoid dropping the pending update
- Disallow toggling KVM_MEM_GUEST_MEMFD on an existing memslot, as
it's not supported by KVM and leads to a use-after-free due to KVM
failing to unbind the memslot from the previously-associated
guest_memfd instance
- Harden against similar KVM_MEM_GUEST_MEMFD goofs, and prepare for
supporting flags-only changes on KVM_MEM_GUEST_MEMFD memlslots,
e.g. for dirty logging
- Set exit_code[63:32] to -1 (all 0xffs) when synthesizing a nested
SVM_EXIT_ERR (a.k.a. VMEXIT_INVALID) #VMEXIT, as VMEXIT_INVALID is
defined as -1ull (a 64-bit value)
- Update SVI when activating APICv to fix a bug where a
post-activation EOI for an in-service IRQ would effective be lost
due to SVI being stale
- Immediately refresh APICv controls (if necessary) on a nested
VM-Exit instead of deferring the update via KVM_REQ_APICV_UPDATE,
as the request is effectively ignored because KVM thinks the vCPU
already has the correct APICv settings"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: nVMX: Immediately refresh APICv controls as needed on nested VM-Exit
KVM: VMX: Update SVI during runtime APICv activation
KVM: nSVM: Set exit_code_hi to -1 when synthesizing SVM_EXIT_ERR (failed VMRUN)
KVM: nSVM: Clear exit_code_hi in VMCB when synthesizing nested VM-Exits
KVM: Harden and prepare for modifying existing guest_memfd memslots
KVM: Disallow toggling KVM_MEM_GUEST_MEMFD on an existing memslot
KVM: selftests: Add a CPUID testcase for KVM_SET_CPUID2 with runtime updates
KVM: x86: Apply runtime updates to current CPUID during KVM_SET_CPUID{,2}
KVM: selftests: Add missing "break" in rseq_test's param parsing
Pull block fixes from Jens Axboe:
- ublk selftests for missing coverage
- two fixes for the block integrity code
- fix for the newly added newly added PR read keys ioctl, limiting the
memory that can be allocated
- work around for a deadlock that can occur with ublk, where partition
scanning ends up recursing back into file closure, which needs the
same mutex grabbed. Not the prettiest thing in the world, but an
acceptable work-around until we can eliminate the reliance on
disk->open_mutex for this
- fix for a race between enabling writeback throttling and new IO
submissions
- move a bit of bio flag handling code. No changes, but needed for a
patchset for a future kernel
- fix for an init time id leak failure in rnbd
- loop/zloop state check fix
* tag 'block-6.19-20251218' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
block: validate interval_exp integrity limit
block: validate pi_offset integrity limit
block: rnbd-clt: Fix leaked ID in init_dev()
ublk: fix deadlock when reading partition table
block: add allocation size check in blkdev_pr_read_keys()
Documentation: admin-guide: blockdev: replace zone_capacity with zone_capacity_mb when creating devices
zloop: use READ_ONCE() to read lo->lo_state in queue_rq path
loop: use READ_ONCE() to read lo->lo_state without locking
block: fix race between wbt_enable_default and IO submission
selftests: ublk: add user copy test cases
selftests: ublk: add support for user copy to kublk
selftests: ublk: forbid multiple data copy modes
selftests: ublk: don't share backing files between ublk servers
selftests: ublk: use auto_zc for PER_IO_DAEMON tests in stress_04
selftests: ublk: fix fio arguments in run_io_and_recover()
selftests: ublk: remove unused ios map in seq_io.bt
selftests: ublk: correct last_rw map type in seq_io.bt
selftests: ublk: fix overflow in ublk_queue_auto_zc_fallback()
block: move around bio flagging helpers
Pull iommufd fixes from Jason Gunthorpe:
"A few minor fixes, other than the randconfig fix this is only relevant
to test code, not releases:
- Randconfig failure if CONFIG_DMA_SHARED_BUFFER is not set
- Remove gcc warning in kselftest
- Fix a refcount leak on an error path in the selftest support code
- Fix missing overflow checks in the selftest support code"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd/selftest: Check for overflow in IOMMU_TEST_OP_ADD_RESERVED
iommufd/selftest: Do not leak the hwpt if IOMMU_TEST_OP_MD_CHECK_MAP fails
iommufd/selftest: Make it clearer to gcc that the access is not out of bounds
iommufd: Fix building without dmabuf
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and CAN.
Current release - regressions:
- netfilter: nf_conncount: fix leaked ct in error paths
- sched: act_mirred: fix loop detection
- sctp: fix potential deadlock in sctp_clone_sock()
- can: fix build dependency
- eth: mlx5e: do not update BQL of old txqs during channel
reconfiguration
Previous releases - regressions:
- sched: ets: always remove class from active list before deleting it
- inet: frags: flush pending skbs in fqdir_pre_exit()
- netfilter: nf_nat: remove bogus direction check
- mptcp:
- schedule rtx timer only after pushing data
- avoid deadlock on fallback while reinjecting
- can: gs_usb: fix error handling
- eth:
- mlx5e:
- avoid unregistering PSP twice
- fix double unregister of HCA_PORTS component
- bnxt_en: fix XDP_TX path
- mlxsw: fix use-after-free when updating multicast route stats
Previous releases - always broken:
- ethtool: avoid overflowing userspace buffer on stats query
- openvswitch: fix middle attribute validation in push_nsh() action
- eth:
- mlx5: fw_tracer, validate format string parameters
- mlxsw: spectrum_router: fix neighbour use-after-free
- ipvlan: ignore PACKET_LOOPBACK in handle_mode_l2()
Misc:
- Jozsef Kadlecsik retires from maintaining netfilter
- tools: ynl: fix build on systems with old kernel headers"
* tag 'net-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
net: hns3: add VLAN id validation before using
net: hns3: using the num_tqps to check whether tqp_index is out of range when vf get ring info from mbx
net: hns3: using the num_tqps in the vf driver to apply for resources
net: enetc: do not transmit redirected XDP frames when the link is down
selftests/tc-testing: Test case exercising potential mirred redirect deadlock
net/sched: act_mirred: fix loop detection
sctp: Clear inet_opt in sctp_v6_copy_ip_options().
sctp: Fetch inet6_sk() after setting ->pinet6 in sctp_clone_sock().
net/handshake: duplicate handshake cancellations leak socket
net/mlx5e: Don't include PSP in the hard MTU calculations
net/mlx5e: Do not update BQL of old txqs during channel reconfiguration
net/mlx5e: Trigger neighbor resolution for unresolved destinations
net/mlx5e: Use ip6_dst_lookup instead of ipv6_dst_lookup_flow for MAC init
net/mlx5: Serialize firmware reset with devlink
net/mlx5: fw_tracer, Handle escaped percent properly
net/mlx5: fw_tracer, Validate format string parameters
net/mlx5: Drain firmware reset in shutdown callback
net/mlx5: fw reset, clear reset requested on drain_fw_reset
net: dsa: mxl-gsw1xx: manually clear RANEG bit
net: dsa: mxl-gsw1xx: fix .shutdown driver operation
...
KVM fixes for 6.19-rc1
- Add a missing "break" to fix param parsing in the rseq selftest.
- Apply runtime updates to the _current_ CPUID when userspace is setting
CPUID, e.g. as part of vCPU hotplug, to fix a false positive and to avoid
dropping the pending update.
- Disallow toggling KVM_MEM_GUEST_MEMFD on an existing memslot, as it's not
supported by KVM and leads to a use-after-free due to KVM failing to unbind
the memslot from the previously-associated guest_memfd instance.
- Harden against similar KVM_MEM_GUEST_MEMFD goofs, and prepare for supporting
flags-only changes on KVM_MEM_GUEST_MEMFD memlslots, e.g. for dirty logging.
- Set exit_code[63:32] to -1 (all 0xffs) when synthesizing a nested
SVM_EXIT_ERR (a.k.a. VMEXIT_INVALID) #VMEXIT, as VMEXIT_INVALID is defined
as -1ull (a 64-bit value).
- Update SVI when activating APICv to fix a bug where a post-activation EOI
for an in-service IRQ would effective be lost due to SVI being stale.
- Immediately refresh APICv controls (if necessary) on a nested VM-Exit
instead of deferring the update via KVM_REQ_APICV_UPDATE, as the request is
effectively ignored because KVM thinks the vCPU already has the correct
APICv settings.
Pull bpf fixes from Alexei Starovoitov:
- Fix BPF builds due to -fms-extensions. selftests (Alexei
Starovoitov), bpftool (Quentin Monnet).
- Fix build of net/smc when CONFIG_BPF_SYSCALL=y, but CONFIG_BPF_JIT=n
(Geert Uytterhoeven)
- Fix livepatch/BPF interaction and support reliable unwinding through
BPF stack frames (Josh Poimboeuf)
- Do not audit capability check in arm64 JIT (Ondrej Mosnacek)
- Fix truncated dmabuf BPF iterator reads (T.J. Mercier)
- Fix verifier assumptions of bpf_d_path's output buffer (Shuran Liu)
- Fix warnings in libbpf when built with -Wdiscarded-qualifiers under
C23 (Mikhail Gavrilov)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: add regression test for bpf_d_path()
bpf: Fix verifier assumptions of bpf_d_path's output buffer
selftests/bpf: Add test for truncated dmabuf_iter reads
bpf: Fix truncated dmabuf iterator reads
x86/unwind/orc: Support reliable unwinding through BPF stack frames
bpf: Add bpf_has_frame_pointer()
bpf, arm64: Do not audit capability check in do_jit()
libbpf: Fix -Wdiscarded-qualifiers under C23
bpftool: Fix build warnings due to MS extensions
net: smc: SMC_HS_CTRL_BPF should depend on BPF_JIT
selftests/bpf: Add -fms-extensions to bpf build flags
Pull sched_ext fixes from Tejun Heo:
- Fix memory leak when destroying helper kthread workers during
scheduler disable
- Fix bypass depth accounting on scx_enable() failure which could leave
the system permanently in bypass mode
- Fix missing preemption handling when moving tasks to local DSQs via
scx_bpf_dsq_move()
- Misc fixes including NULL check for put_prev_task(), flushing stdout
in selftests, and removing unused code
* tag 'sched_ext-for-6.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Remove unused code in the do_pick_task_scx()
selftests/sched_ext: flush stdout before test to avoid log spam
sched_ext: Fix missing post-enqueue handling in move_local_task_to_local_dsq()
sched_ext: Factor out local_dsq_post_enq() from dispatch_enqueue()
sched_ext: Fix bypass depth leak on scx_enable() failure
sched/ext: Avoid null ptr traversal when ->put_prev_task() is called with NULL next
sched_ext: Fix the memleak for sch->helper objects
GCC gets a bit confused and reports:
In function '_test_cmd_get_hw_info',
inlined from 'iommufd_ioas_get_hw_info' at iommufd.c:779:3,
inlined from 'wrapper_iommufd_ioas_get_hw_info' at iommufd.c:752:1:
>> iommufd_utils.h:804:37: warning: array subscript 'struct iommu_test_hw_info[0]' is partly outside array bounds of 'struct iommu_test_hw_info_buffer_smaller[1]' [-Warray-bounds=]
804 | assert(!info->flags);
| ~~~~^~~~~~~
iommufd.c: In function 'wrapper_iommufd_ioas_get_hw_info':
iommufd.c:761:11: note: object 'buffer_smaller' of size 4
761 | } buffer_smaller;
| ^~~~~~~~~~~~~~
While it is true that "struct iommu_test_hw_info[0]" is partly out of
bounds of the input pointer, it is not true that info->flags is out of
bounds. Unclear why it warns on this.
Reuse an existing properly sized stack buffer and pass a truncated length
instead to test the same thing.
Fixes: af4fde93c3 ("iommufd/selftest: Add coverage for IOMMU_GET_HW_INFO ioctl")
Link: https://patch.msgid.link/r/0-v1-63a2cffb09da+4486-iommufd_gcc_bounds_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512032344.kaAcKFIM-lkp@intel.com/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add lkdtm cases to trigger a BUG() or panic() from hardirq context. This
is useful for testing pstore behavior being invoked from such contexts.
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The ublk selftests cover every data copy mode except user copy. Add
tests for user copy based on the existing test suite:
- generic_14 ("basic recover function verification (user copy)") based
on generic_04 and generic_05
- null_03 ("basic IO test with user copy") based on null_01 and null_02
- loop_06 ("write and verify over user copy") based on loop_01 and
loop_03
- loop_07 ("mkfs & mount & umount with user copy") based on loop_02 and
loop_04
- stripe_05 ("write and verify test on user copy") based on stripe_03
- stripe_06 ("mkfs & mount & umount on user copy") based on stripe_02
and stripe_04
- stress_06 ("run IO and remove device (user copy)") based on stress_01
and stress_03
- stress_07 ("run IO and kill ublk server (user copy)") based on
stress_02 and stress_04
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The ublk selftests mock ublk server kublk supports every data copy mode
except user copy. Add support for user copy to kublk, enabled via the
--user_copy (-u) command line argument. On writes, issue pread() calls
to copy the write data into the ublk_io's buffer before dispatching the
write to the target implementation. On reads, issue pwrite() calls to
copy read data from the ublk_io's buffer before committing the request.
Copy in 2 KB chunks to provide some coverage of the offseting logic.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The kublk mock ublk server allows multiple data copy mode arguments to
be passed on the command line (--zero_copy, --get_data, and --auto_zc).
The ublk device will be created with all the requested feature flags,
however kublk will only use one of the modes to interact with request
data (arbitrarily preferring auto_zc over zero_copy over get_data). To
clarify the intent of the test, don't allow multiple data copy modes to
be specified. --zero_copy and --auto_zc are allowed together for
--auto_zc_fallback, which uses both copy modes.
Don't set UBLK_F_USER_COPY for zero_copy, as it's a separate feature.
Fix the test cases in test_stress_05 passing --get_data along with
--zero_copy or --auto_zc.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
stress_04 is missing a wait between blocks of tests, meaning multiple
ublk servers will be running in parallel using the same backing files.
Add a wait after each section to ensure each backing file is in use by a
single ublk server at a time.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
stress_04 is described as "run IO and kill ublk server(zero copy)" but
the --per_io_tasks tests cases don't use zero copy. Plus, one of the
test cases is duplicated. Add --auto_zc to these test cases and
--auto_zc_fallback to one of the duplicated ones. This matches the test
cases in stress_03.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
run_io_and_recover() invokes fio with --size="${size}", but the variable
size doesn't exist. Thus, the argument expands to --size=, which causes
fio to exit immediately with an error without issuing any I/O. Pass the
value for size as the first argument to the function.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The last_rw map is initialized with a value of 0 but later assigned the
value args.sector + args.nr_sector, which has type sector_t = u64.
bpftrace complains about the type mismatch between int64 and uint64:
trace/seq_io.bt:18:3-59: ERROR: Type mismatch for @last_rw: trying to assign value of type 'uint64' when map already contains a value of type 'int64'
@last_rw[$dev, str($2)] = (args.sector + args.nr_sector);
Cast the initial value to uint64 so bpftrace will load the program.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
