Pull fallocate updates from Christian Brauner:
"fallocate() currently supports creating preallocated files
efficiently. However, on most filesystems fallocate() will preallocate
blocks in an unwriten state even if FALLOC_FL_ZERO_RANGE is specified.
The extent state must later be converted to a written state when the
user writes data into this range, which can trigger numerous metadata
changes and journal I/O. This may leads to significant write
amplification and performance degradation in synchronous write mode.
At the moment, the only method to avoid this is to create an empty
file and write zero data into it (for example, using 'dd' with a large
block size). However, this method is slow and consumes a considerable
amount of disk bandwidth.
Now that more and more flash-based storage devices are available it is
possible to efficiently write zeros to SSDs using the unmap write
zeroes command if the devices do not write physical zeroes to the
media.
For example, if SCSI SSDs support the UMMAP bit or NVMe SSDs support
the DEAC bit[1], the write zeroes command does not write actual data
to the device, instead, NVMe converts the zeroed range to a
deallocated state, which works fast and consumes almost no disk write
bandwidth.
This series implements the BLK_FEAT_WRITE_ZEROES_UNMAP feature and
BLK_FLAG_WRITE_ZEROES_UNMAP_DISABLED flag for SCSI, NVMe and
device-mapper drivers, and add the FALLOC_FL_WRITE_ZEROES and
STATX_ATTR_WRITE_ZEROES_UNMAP support for ext4 and raw bdev devices.
fallocate() is subsequently extended with the FALLOC_FL_WRITE_ZEROES
flag. FALLOC_FL_WRITE_ZEROES zeroes a specified file range in such a
way that subsequent writes to that range do not require further
changes to the file mapping metadata. This flag is beneficial for
subsequent pure overwriting within this range, as it can save on block
allocation and, consequently, significant metadata changes"
* tag 'vfs-6.17-rc1.fallocate' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
ext4: add FALLOC_FL_WRITE_ZEROES support
block: add FALLOC_FL_WRITE_ZEROES support
block: factor out common part in blkdev_fallocate()
fs: introduce FALLOC_FL_WRITE_ZEROES to fallocate
dm: clear unmap write zeroes limits when disabling write zeroes
scsi: sd: set max_hw_wzeroes_unmap_sectors if device supports SD_ZERO_*_UNMAP
nvmet: set WZDS and DRB if device enables unmap write zeroes operation
nvme: set max_hw_wzeroes_unmap_sectors if device supports DEAC bit
block: introduce max_{hw|user}_wzeroes_unmap_sectors to queue limits
Pull nfsd updates from Chuck Lever:
"NFSD is finally able to offer write delegations to clients that open
files with O_WRONLY, thanks to patches from Dai Ngo. We're expecting
this to accelerate a few interesting corner cases.
The cap on the number of operations per NFSv4 COMPOUND has been
lifted. Now, clients that send COMPOUNDs containing dozens of
operations (for example, a long stream of LOOKUP operations to walk a
pathname in a single round trip) will no longer be rejected.
This release re-enables the ability for NFSD to perform NFSv4.2 COPY
operations asynchronously. This feature has been disabled to mitigate
the risk of denial-of-service when too many such requests arrive.
Many thanks to the contributors, reviewers, testers, and bug reporters
who participated during the v6.17 development cycle"
* tag 'nfsd-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (32 commits)
nfsd: Drop dprintk in blocklayout xdr functions
sunrpc: make svc_tcp_sendmsg() take a signed sentp pointer
sunrpc: rearrange struct svc_rqst for fewer cachelines
sunrpc: return better error in svcauth_gss_accept() on alloc failure
sunrpc: reset rq_accept_statp when starting a new RPC
sunrpc: remove SVC_SYSERR
sunrpc: fix handling of unknown auth status codes
NFSD: Simplify struct knfsd_fh
NFSD: Access a knfsd_fh's fsid by pointer
Revert "NFSD: Force all NFSv4.2 COPY requests to be synchronous"
NFSD: Avoid multiple -Wflex-array-member-not-at-end warnings
NFSD: Use vfs_iocb_iter_write()
NFSD: Use vfs_iocb_iter_read()
NFSD: Clean up kdoc for nfsd_open_local_fh()
NFSD: Clean up kdoc for nfsd_file_put_local()
NFSD: Remove definition for trace_nfsd_ctl_maxconn
NFSD: Remove definition for trace_nfsd_file_gc_recent
NFSD: Remove definitions for unused trace_nfsd_file_lru trace points
NFSD: Remove definition for trace_nfsd_file_unhash_and_queue
nfsd: Use correct error code when decoding extents
...
Background
==========
When TCP retransmits a packet due to missing ACKs, the
retransmission may fail for various reasons (e.g., packets
stuck in driver queues, receiver zero windows, or routing issues).
The original tcp_retransmit_skb tracepoint:
'commit e086101b15 ("tcp: add a tracepoint for tcp retransmission")'
lacks visibility into these failure causes, making production
diagnostics difficult.
Solution
========
Adds the retval("err") to the tcp_retransmit_skb tracepoint.
Enables users to know why some tcp retransmission failed and
users can filter retransmission failures by retval.
Compatibility description
=========================
This patch extends the tcp_retransmit_skb tracepoint
by adding a new "err" field at the end of its
existing structure (within TP_STRUCT__entry). The
compatibility implications are detailed as follows:
1) Structural compatibility for legacy user-space tools
Legacy tools/BPF programs accessing existing fields
(by offset or name) can still work without modification
or recompilation.The new field is appended to the end,
preserving original memory layout.
2) Note: semantic changes
The original tracepoint primarily only focused on
successfully retransmitted packets. With this patch,
the tracepoint now can figure out packets that may
terminate early due to specific reasons. For accurate
statistics, users should filter using "err" to
distinguish outcomes.
Before patched:
field:const void * skbaddr; offset:8; size:8; signed:0;
field:const void * skaddr; offset:16; size:8; signed:0;
field:int state; offset:24; size:4; signed:1;
field:__u16 sport; offset:28; size:2; signed:0;
field:__u16 dport; offset:30; size:2; signed:0;
field:__u16 family; offset:32; size:2; signed:0;
field:__u8 saddr[4]; offset:34; size:4; signed:0;
field:__u8 daddr[4]; offset:38; size:4; signed:0;
field:__u8 saddr_v6[16]; offset:42; size:16; signed:0;
field:__u8 daddr_v6[16]; offset:58; size:16; signed:0;
print fmt: "skbaddr=%p skaddr=%p family=%s sport=%hu dport=%hu saddr=%pI4 daddr=%pI4 saddrv6=%pI6c daddrv6=%pI6c state=%s"
After patched:
field:const void * skbaddr; offset:8; size:8; signed:0;
field:const void * skaddr; offset:16; size:8; signed:0;
field:int state; offset:24; size:4; signed:1;
field:__u16 sport; offset:28; size:2; signed:0;
field:__u16 dport; offset:30; size:2; signed:0;
field:__u16 family; offset:32; size:2; signed:0;
field:__u8 saddr[4]; offset:34; size:4; signed:0;
field:__u8 daddr[4]; offset:38; size:4; signed:0;
field:__u8 saddr_v6[16]; offset:42; size:16; signed:0;
field:__u8 daddr_v6[16]; offset:58; size:16; signed:0;
field:int err; offset:76; size:4; signed:1;
print fmt: "skbaddr=%p skaddr=%p family=%s sport=%hu dport=%hu saddr=%pI4 daddr=%pI4 saddrv6=%pI6c daddrv6=%pI6c state=%s err=%d"
Co-developed-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Fan Yu <fan.yu9@zte.com.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250721111607626_BDnIJB0ywk6FghN63bor@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The dirty_log_pages tree is used for tree logging and marks extents
based on log_transid. The bits could be renamed to resemble the
LOG1/LOG2 naming used for the BTRFS_FS_LOG1_ERR bits.
The DIRTY bit is renamed to LOG1 and NEW to LOG2.
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of using a bare atomic, use the refcount_t type, which despite
being a structure that contains only an atomic, has an API that checks
for underflows and other hazards. This doesn't change the size of the
extent_buffer structure.
This removes the need to do things like this:
WARN_ON(atomic_read(&eb->refs) == 0);
if (atomic_dec_and_test(&eb->refs)) {
(...)
}
And do just:
if (refcount_dec_and_test(&eb->refs)) {
(...)
}
Since refcount_dec_and_test() already triggers a warning when we decrement
a ref count that has a value of 0 (or below zero).
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Arm SCMI updates for v6.17
1. A fix is introduced to correct turbo frequency marking for 64-bit
devices with sustained frequencies over 4GHz, ensuring accurate turbo
frequency identification.
2. Debug capabilities are being improved by introducing in-flight transfer
tracking using debug counters, which help diagnose transfer congestion
and behavior. Additional tracepoints are added to log in-flight counts
at transfer begin and end, offering better runtime insight. The debug
counters now support decrement operations using a newly added
scmi_dec_count helper, making counter tracking symmetric and more robust.
3. A race condition in suspend-resume logic is being resolved by ensuring
SCMI_SYSPOWER_IDLE state is set early during resume, improving suspend
reliability under certain conditions. New suspend and resume operations
are added to the scmi_bus_type to enable finer power management control
for SCMI-based devices.
4. Finally enhancements are also made to avoid registering notifiers for
events that a platform does not support, reducing unnecessary overhead
by checking for unsupported event types during protocolinitialization.
* tag 'scmi-updates-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Convert to SYSTEM_SLEEP_PM_OPS
firmware: arm_scmi: Avoid notifier registration for unsupported events
firmware: arm_scmi: power_control: Ensure SCMI_SYSPOWER_IDLE is set early during resume
firmware: arm_scmi: Add power management operations to SCMI bus
include: trace: Add tracepoint support for inflight xfer count
firmware: arm_scmi: Track number of inflight SCMI transfers
firmware: arm_scmi: Add support for debug counter decrement
firmware: arm_scmi: Fix up turbo frequencies selection
Link: https://lore.kernel.org/r/20250709122907.1171913-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull vfs fixes from Christian Brauner:
- Fix a memory leak in fcntl_dirnotify()
- Raise SB_I_NOEXEC on secrement superblock instead of messing with
flags on the mount
- Add fsdevel and block mailing lists to uio entry. We had a few
instances were very questionable stuff was added without either block
or the VFS being aware of it
- Fix netfs copy-to-cache so that it performs collection with
ceph+fscache
- Fix netfs race between cache write completion and ALL_QUEUED being
set
- Verify the inode mode when loading entries from disk in isofs
- Avoid state_lock in iomap_set_range_uptodate()
- Fix PIDFD_INFO_COREDUMP check in PIDFD_GET_INFO ioctl
- Fix the incorrect return value in __cachefiles_write()
* tag 'vfs-6.16-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
MAINTAINERS: add block and fsdevel lists to iov_iter
netfs: Fix race between cache write completion and ALL_QUEUED being set
netfs: Fix copy-to-cache so that it performs collection with ceph+fscache
fix a leak in fcntl_dirnotify()
iomap: avoid unnecessary ifs_set_range_uptodate() with locks
isofs: Verify inode mode when loading from disk
cachefiles: Fix the incorrect return value in __cachefiles_write()
secretmem: use SB_I_NOEXEC
coredump: fix PIDFD_INFO_COREDUMP ioctl check
When a call is released, rxrpc takes the spinlock and removes it from
->recvmsg_q in an effort to prevent racing recvmsg() invocations from
seeing the same call. Now, rxrpc_recvmsg() only takes the spinlock when
actually removing a call from the queue; it doesn't, however, take it in
the lead up to that when it checks to see if the queue is empty. It *does*
hold the socket lock, which prevents a recvmsg/recvmsg race - but this
doesn't prevent sendmsg from ending the call because sendmsg() drops the
socket lock and relies on the call->user_mutex.
Fix this by firstly removing the bit in rxrpc_release_call() that dequeues
the released call and, instead, rely on recvmsg() to simply discard
released calls (done in a preceding fix).
Secondly, rxrpc_notify_socket() is abandoned if the call is already marked
as released rather than trying to be clever by setting both pointers in
call->recvmsg_link to NULL to trick list_empty(). This isn't perfect and
can still race, resulting in a released call on the queue, but recvmsg()
will now clean that up.
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Junvyyang, Tencent Zhuque Lab <zhuque@tencent.com>
cc: LePremierHomme <kwqcheii@proton.me>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250717074350.3767366-4-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a call receives an event (such as incoming data), the call gets placed
on the socket's queue and a thread in recvmsg can be awakened to go and
process it. Once the thread has picked up the call off of the queue,
further events will cause it to be requeued, and once the socket lock is
dropped (recvmsg uses call->user_mutex to allow the socket to be used in
parallel), a second thread can come in and its recvmsg can pop the call off
the socket queue again.
In such a case, the first thread will be receiving stuff from the call and
the second thread will be blocked on call->user_mutex. The first thread
can, at this point, process both the event that it picked call for and the
event that the second thread picked the call for and may see the call
terminate - in which case the call will be "released", decoupling the call
from the user call ID assigned to it (RXRPC_USER_CALL_ID in the control
message).
The first thread will return okay, but then the second thread will wake up
holding the user_mutex and, if it sees that the call has been released by
the first thread, it will BUG thusly:
kernel BUG at net/rxrpc/recvmsg.c:474!
Fix this by just dequeuing the call and ignoring it if it is seen to be
already released. We can't tell userspace about it anyway as the user call
ID has become stale.
Fixes: 248f219cb8 ("rxrpc: Rewrite the data and ack handling code")
Reported-by: Junvyyang, Tencent Zhuque Lab <zhuque@tencent.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: LePremierHomme <kwqcheii@proton.me>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250717074350.3767366-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stephen reported new 'make htmldocs' warnings introduced by 4cc21a0076
("block: add tracepoint for blk_zone_update_request_bio").
One is a wrong function name in the tracepoint's kernel-doc and one is a
wrong function parameter.
Fix these so 'make htmldocs' is warning free again for the block layer
tracepoints.
Fixes: 4cc21a0076 ("block: add tracepoint for blk_zone_update_request_bio")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250716133631.94898-1-johannes.thumshirn@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a tracepoint for blkdev_zone_mgmt to trace zone management commands
submitted by higher layers like file systems or user space.
An example output for this tracepoint is as follows:
mkfs.btrfs-203 [001] ..... 42.877493: blkdev_zone_mgmt: 8,0 ZRS 5242880 + 0
This example output shows a REQ_OP_ZONE_RESET operation submitted by
mkfs.btrfs.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250715115324.53308-5-johannes.thumshirn@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Convert the svc_wake_up tracepoint into svc_pool_thread_event class.
Have it also record the pool id, and add new tracepoints for when the
thread is already running and for when there are no idle threads.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When netfslib is issuing subrequests, the subrequests start processing
immediately and may complete before we reach the end of the issuing
function. At the end of the issuing function we set NETFS_RREQ_ALL_QUEUED
to indicate to the collector that we aren't going to issue any more subreqs
and that it can do the final notifications and cleanup.
Now, this isn't a problem if the request is synchronous
(NETFS_RREQ_OFFLOAD_COLLECTION is unset) as the result collection will be
done in-thread and we're guaranteed an opportunity to run the collector.
However, if the request is asynchronous, collection is primarily triggered
by the termination of subrequests queuing it on a workqueue. Now, a race
can occur here if the app thread sets ALL_QUEUED after the last subrequest
terminates.
This can happen most easily with the copy2cache code (as used by Ceph)
where, in the collection routine of a read request, an asynchronous write
request is spawned to copy data to the cache. Folios are added to the
write request as they're unlocked, but there may be a delay before
ALL_QUEUED is set as the write subrequests may complete before we get
there.
If all the write subreqs have finished by the ALL_QUEUED point, no further
events happen and the collection never happens, leaving the request
hanging.
Fix this by queuing the collector after setting ALL_QUEUED. This is a bit
heavy-handed and it may be sufficient to do it only if there are no extant
subreqs.
Also add a tracepoint to cross-reference both requests in a copy-to-request
operation and add a trace to the netfs_rreq tracepoint to indicate the
setting of ALL_QUEUED.
Fixes: e2d46f2ec3 ("netfs: Change the read result collector to only use one work item")
Reported-by: Max Kellermann <max.kellermann@ionos.com>
Link: https://lore.kernel.org/r/CAKPOu+8z_ijTLHdiCYGU_Uk7yYD=shxyGLwfe-L7AV3DhebS3w@mail.gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250711151005.2956810-3-dhowells@redhat.com
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
cc: Paulo Alcantara <pc@manguebit.org>
cc: Viacheslav Dubeyko <slava@dubeyko.com>
cc: Alex Markuze <amarkuze@redhat.com>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: netfs@lists.linux.dev
cc: ceph-devel@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
After mpage_map_and_submit_extent() supports restarting handle if
credits are insufficient during allocating blocks, it is more likely to
exit the current mapping iteration and continue to process the current
processing partially mapped folio again. The existing tracepoints are
not sufficient to track this situation, so enhance the tracepoints to
track the writeback position and the return value before and after
submitting the folios.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250707140814.542883-7-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
migratetype is no longer overwritten during pageblock isolation,
start_isolate_page_range(), has_unmovable_pages(), and
set_migratetype_isolate() no longer need which migratetype to restore
during isolation failure.
For has_unmoable_pages(), it needs to know if the isolation is for CMA
allocation, so adding PB_ISOLATE_MODE_CMA_ALLOC provide the information.
At the same time change isolation flags to enum pb_isolate_mode
(PB_ISOLATE_MODE_MEM_OFFLINE, PB_ISOLATE_MODE_CMA_ALLOC,
PB_ISOLATE_MODE_OTHER). Remove REPORT_FAILURE and check
PB_ISOLATE_MODE_MEM_OFFLINE, since only PB_ISOLATE_MODE_MEM_OFFLINE
reports isolation failures.
alloc_contig_range() no longer needs migratetype. Replace it with a newly
defined acr_flags_t to tell if an allocation is for CMA. So does
__alloc_contig_migrate_range(). Add ACR_FLAGS_NONE (set to 0) to indicate
ordinary allocations.
Link: https://lkml.kernel.org/r/20250617021115.2331563-7-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shuemov <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Richard Chang <richardycc@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The core kernel code is currently very inconsistent in its use of
vm_flags_t vs. unsigned long. This prevents us from changing the type of
vm_flags_t in the future and is simply not correct, so correct this.
While this results in rather a lot of churn, it is a critical
pre-requisite for a future planned change to VMA flag type.
Additionally, update VMA userland tests to account for the changes.
To make review easier and to break things into smaller parts, driver and
architecture-specific changes is left for a subsequent commit.
The code has been adjusted to cascade the changes across all calling code
as far as is needed.
We will adjust architecture-specific and driver code in a subsequent patch.
Overall, this patch does not introduce any functional change.
Link: https://lkml.kernel.org/r/d1588e7bb96d1ea3fe7b9df2c699d5b4592d901d.1750274467.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Kees Cook <kees@kernel.org>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Acked-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull vfs fixes from Christian Brauner:
- Fix a regression caused by the anonymous inode rework. Making them
regular files causes various places in the kernel to tip over
starting with io_uring.
Revert to the former status quo and port our assertion to be based on
checking the inode so we don't lose the valuable VFS_*_ON_*()
assertions that have already helped discover weird behavior our
outright bugs.
- Fix the the upper bound calculation in fuse_fill_write_pages()
- Fix priority inversion issues in the eventpoll code
- Make secretmen use anon_inode_make_secure_inode() to avoid bypassing
the LSM layer
- Fix a netfs hang due to missing case in final DIO read result
collection
- Fix a double put of the netfs_io_request struct
- Provide some helpers to abstract out NETFS_RREQ_IN_PROGRESS flag
wrangling
- Fix infinite looping in netfs_wait_for_pause/request()
- Fix a netfs ref leak on an extra subrequest inserted into a request's
list of subreqs
- Fix various cifs RPC callbacks to set NETFS_SREQ_NEED_RETRY if a
subrequest fails retriably
- Fix a cifs warning in the workqueue code when reconnecting a channel
- Fix the updating of i_size in netfs to avoid a race between testing
if we should have extended the file with a DIO write and changing
i_size
- Merge the places in netfs that update i_size on write
- Fix coredump socket selftests
* tag 'vfs-6.16-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
anon_inode: rework assertions
netfs: Update tracepoints in a number of ways
netfs: Renumber the NETFS_RREQ_* flags to make traces easier to read
netfs: Merge i_size update functions
netfs: Fix i_size updating
smb: client: set missing retry flag in cifs_writev_callback()
smb: client: set missing retry flag in cifs_readv_callback()
smb: client: set missing retry flag in smb2_writev_callback()
netfs: Fix ref leak on inserted extra subreq in write retry
netfs: Fix looping in wait functions
netfs: Provide helpers to perform NETFS_RREQ_IN_PROGRESS flag wangling
netfs: Fix double put of request
netfs: Fix hang due to missing case in final DIO read result collection
eventpoll: Fix priority inversion problem
fuse: fix fuse_fill_write_pages() upper bound calculation
fs: export anon_inode_make_secure_inode() and fix secretmem LSM bypass
selftests/coredump: Fix "socket_detect_userspace_client" test failure
Enhance the existing SCMI transfer tracepoints by including the current
in-flight transfer count in `scmi_xfer_begin` and `scmi_xfer_end`.
Introduce a new helper `scmi_inflight_count()` to retrieve the active
transfer count from the SCMI debug counters when debug is enabled.
This trace data is useful for visualizing transfer activity over time
and identifying congestion or unexpected behavior in SCMI messaging.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Philip Radford <philip.radford@arm.com>
Message-Id: <20250630105544.531723-4-philip.radford@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Make a number of updates to the netfs tracepoints:
(1) Remove a duplicate trace from netfs_unbuffered_write_iter_locked().
(2) Move the trace in netfs_wake_rreq_flag() to after the flag is cleared
so that the change appears in the trace.
(3) Differentiate the use of netfs_rreq_trace_wait/woke_queue symbols.
(4) Don't do so many trace emissions in the wait functions as some of them
are redundant.
(5) In netfs_collect_read_results(), differentiate a subreq that's being
abandoned vs one that has been consumed in a regular way.
(6) Add a tracepoint to indicate the call to ->ki_complete().
(7) Don't double-increment the subreq_counter when retrying a write.
(8) Move the netfs_sreq_trace_io_progress tracepoint within cifs code to
just MID_RESPONSE_RECEIVED and add different tracepoints for other MID
states and note check failure.
Signed-off-by: David Howells <dhowells@redhat.com>
Co-developed-by: Paulo Alcantara <pc@manguebit.org>
Signed-off-by: Paulo Alcantara <pc@manguebit.org>
Link: https://lore.kernel.org/20250701163852.2171681-14-dhowells@redhat.com
cc: Steve French <sfrench@samba.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Renumber the NETFS_RREQ_* flags to put the most useful status bits in the
bottom nibble - and therefore the last hex digit in the trace output -
making it easier to grasp the state at a glance.
In particular, put the IN_PROGRESS flag in bit 0 and ALL_QUEUED at bit 1.
Also make the flags field in /proc/fs/netfs/requests larger to accommodate
all the flags.
Also make the flags field in the netfs_sreq tracepoint larger to
accommodate all the NETFS_SREQ_* flags.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250701163852.2171681-13-dhowells@redhat.com
Reviewed-by: Paulo Alcantara <pc@manguebit.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
If a netfs request finishes during the pause loop, it will have the ref
that belongs to the IN_PROGRESS flag removed at that point - however, if it
then goes to the final wait loop, that will *also* put the ref because it
sees that the IN_PROGRESS flag is clear and incorrectly assumes that this
happened when it called the collector.
In fact, since IN_PROGRESS is clear, we shouldn't call the collector again
since it's done all the cleanup, such as calling ->ki_complete().
Fix this by making netfs_collect_in_app() just return, indicating that
we're done if IN_PROGRESS is removed.
Fixes: 2b1424cd13 ("netfs: Fix wait/wake to be consistent about the waitqueue used")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250701163852.2171681-3-dhowells@redhat.com
Tested-by: Steve French <sfrench@samba.org>
Reviewed-by: Paulo Alcantara <pc@manguebit.org>
cc: Steve French <sfrench@samba.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2025-06-27
We've added 6 non-merge commits during the last 8 day(s) which contain
a total of 6 files changed, 120 insertions(+), 20 deletions(-).
The main changes are:
1) Fix RCU usage in task_cls_state() for BPF programs using helpers like
bpf_get_cgroup_classid_curr() outside of networking, from Charalampos
Mitrodimas.
2) Fix a sockmap race between map_update and a pending workqueue from
an earlier map_delete freeing the old psock where both pointed to the
same psock->sk, from Jiayuan Chen.
3) Fix a data corruption issue when using bpf_msg_pop_data() in kTLS which
failed to recalculate the ciphertext length, also from Jiayuan Chen.
4) Remove xdp_redirect_map{,_err} trace events since they are unused and
also hide XDP trace events under CONFIG_BPF_SYSCALL, from Steven Rostedt.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
xdp: tracing: Hide some xdp events under CONFIG_BPF_SYSCALL
xdp: Remove unused events xdp_redirect_map and xdp_redirect_map_err
net, bpf: Fix RCU usage in task_cls_state() for BPF programs
selftests/bpf: Add test to cover ktls with bpf_msg_pop_data
bpf, ktls: Fix data corruption when using bpf_msg_pop_data() in ktls
bpf, sockmap: Fix psock incorrectly pointing to sk
====================
Link: https://patch.msgid.link/20250626230111.24772-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Squash two #idef CONFIG_HAVE_KVM_IRQCHIP regions in KVM's trace events, as
the only code outside of the #idefs depends on CONFIG_KVM_IOAPIC, and that
Kconfig only exists for x86, which unconditionally selects HAVE_KVM_IRQCHIP.
No functional change intended.
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20250611213557.294358-16-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
