Each ENETC has a set of external MDIO registers to access its external
PHY based on its port EMDIO bus, these registers are used for MDIO bus
access, such as setting the PHY address, PHY register address and value,
read or write operations, C22 or C45 format, etc. The base address of
this set of registers has been modified in ENETC v4 and is different
from that in ENETC v1. So the base address needs to be updated so that
ENETC v4 can use port MDIO to manage its own external PHY.
Additionally, if ENETC has the PCS layer, it also has a set of internal
MDIO registers for managing its on-die PHY (PCS/Serdes). The base address
of this set of registers is also different from that of ENETC v1, so the
base address also needs to be updated so that ENETC v4 can support the
management of on-die PHY through the internal MDIO bus.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20251119102557.1041881-4-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NETC IP has only one external master MDIO interface (eMDIO) for managing
the external PHYs. ENETC can use the interfaces provided by the EMDIO
function or its port MDIO to access and manage its external PHY. Both
the EMDIO function and the port MDIO are all virtual ports of the eMDIO.
The difference is that the EMDIO function is a 'global port', it can
access all the PHYs on the eMDIO, but port MDIO can only access its own
PHY. To ensure that ENETC can only access its own PHY through port MDIO,
LaBCR[MDIO_PHYAD_PRTAD] needs to be set, which represents the address of
the external PHY connected to ENETC. If the accessed PHY address is not
consistent with LaBCR[MDIO_PHYAD_PRTAD], then the MDIO access initiated
by port MDIO will be invalid.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20251119102557.1041881-3-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ENETC supports managing its own external PHY through its port MDIO
functionality. To use this function, the PHY address needs be set in the
corresponding LaBCR register in the Integrated Endpoint Register Block
(IERB), which is used for pre-boot initialization of NETC PCIe functions.
The port MDIO can only work properly when the PHY address accessed by the
port MDIO matches the corresponding LaBCR[MDIO_PHYAD_PRTAD] value.
Because the ENETC driver only registers the MDIO bus (port MDIO bus) when
it detects an MDIO child node in its node, similarly, the netc-blk-ctrl
driver only resolves the PHY address and sets it in the corresponding
LaBCR when it detects an MDIO child node in the ENETC node.
Co-developed-by: Aziz Sellami <aziz.sellami@nxp.com>
Signed-off-by: Aziz Sellami <aziz.sellami@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20251119102557.1041881-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
drivers/net/ethernet/chelsio/cxgb4/sched.h declares a sched_class
struct which has a type name clash with struct sched_class
in kernel/sched/sched.h (a type used in a field in task_struct).
When cxgb4 is a builtin we end up with both sched_class types,
and as a result of this we wind up with DWARF (and derived from
that BTF) with a duplicate incorrect task_struct representation.
When cxgb4 is built-in this type clash can cause kernel builds to
fail as resolve_btfids will fail when confused which task_struct
to use. See [1] for more details.
As such, renaming sched_class to ch_sched_class (in line with
other structs like ch_sched_flowc) makes sense.
[1] https://lore.kernel.org/bpf/2412725b-916c-47bd-91c3-c2d57e3e6c7b@acm.org/
Reported-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Potnuri Bharat Teja <bharat@chelsio.com>
Link: https://patch.msgid.link/20251121181231.64337-1-alan.maguire@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 84eaf4359c ("net: ethtool: add get_rx_ring_count callback to
optimize RX ring queries") added specific support for GRXRINGS callback,
simplifying .get_rxnfc.
Remove the handling of GRXRINGS in .get_rxnfc() by moving it to the new
.get_rx_ring_count() for the mvpp2 driver.
This simplifies the RX ring count retrieval and aligns mvpp2 with the new
ethtool API for querying RX ring parameters, while keeping the other
rxnfc handlers (GRXCLSRLCNT, GRXCLSRULE, GRXCLSRLALL) intact.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251121-marvell-v1-2-8338f3e55a4c@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert the mvneta driver to use the new .get_rx_ring_count ethtool
operation instead of implementing .get_rxnfc solely for handling
ETHTOOL_GRXRINGS command. This simplifies the code by removing the
switch statement and replacing it with a direct return of the queue
count.
The new callback provides the same functionality in a more direct way,
following the ongoing ethtool API modernization.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251121-marvell-v1-1-8338f3e55a4c@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert the hyperv netvsc driver to use the new .get_rx_ring_count
ethtool operation instead of implementing .get_rxnfc solely for handling
ETHTOOL_GRXRINGS command. This simplifies the code by replacing the
switch statement with a direct return of the queue count.
The new callback provides the same functionality in a more direct way,
following the ongoing ethtool API modernization.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251121-hyperv_gxrings-v1-1-31293104953b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver has a lot of bit manipulation of the RGMII registers. Add
a pair of helpers to set bits and clear bits, converting the various
calls to rgmii_updatel() as appropriate.
Most of the change was done via this sed script:
/rgmii_updatel/ {
N
/,$/N
/mask, / ! {
s|rgmii_updatel\(([^,]*,\s+([^,]*),\s+)\2,\s+|rgmii_setmask(\1|
s|rgmii_updatel\(([^,]*,\s+([^,]*),\s+)0,\s+|rgmii_clrmask(\1|
s|^\s+$||
}
}
and then formatting tweaked where necessary.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/E1vM2mw-0000000FRTo-0End@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
readl() returns a u32, and writel() takes a "u32" for the value. These
are used in rgmii_readl()() and rgmii_writel(), but the value and
return are "int". As these are 32-bit register values which are not
signed, use "u32".
These changes do not cause generated code changes.
Update rgmii_updatel() to use u32 for mask and val. Changing "mask"
to "u32" also does not cause generated code changes. However, changing
"val" causes the generated assembly to be re-ordered for aarch64.
Update the temporary variables used with the rgmii functions to use
u32.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/E1vM2mq-0000000FRTi-3y5F@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
swp_l4_csum_mode controls how L4 transmit checksums are computed when
using Software Parser (SWP) hints for header locations.
Supported values:
1. default: device will choose between full_csum or l4_only. Driver
will discover the device's choice during initialization.
2. full_csum: calculate L4 checksum with the pseudo-header.
3. l4_only: calculate L4 checksum without the pseudo-header. Only
available when swp_l4_csum_mode_l4_only is set in
mlx5_ifc_nv_sw_offload_cap_bits.
Note that 'default' might be returned from the device and passed to
userspace, and it might also be set during a
devlink_param::reset_default() call, but attempts to set a value of
default directly with param-set will be rejected.
The l4_only setting is a dependency for PSP initialization in
mlx5e_psp_init().
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20251119025038.651131-5-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow devlink_param::get() handlers to report error messages via
extack. This function is called in a few different contexts, but not
all of them will have an valid extack to use.
When devlink_param::get() is called from param_get_doit or
param_get_dumpit contexts, pass the extack through so that drivers can
report errors when retrieving param values. devlink_param::get() is
called from the context of devlink_param_notify(), pass NULL in for
the extack.
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20251119025038.651131-2-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Increase MAX_USERDATA_ITEMS from 16 to 256 entries now that the userdata
buffer is allocated dynamically.
The previous limit of 16 was necessary because the buffer was statically
allocated for all targets. With dynamic allocation, we can support more
entries without wasting memory on targets that don't use userdata.
This allows users to attach more metadata to their netconsole messages,
which is useful for complex debugging and logging scenarios.
Also update the testcase accordingly.
Signed-off-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251119-netconsole_dynamic_extradata-v3-4-497ac3191707@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The userdata buffer in struct netconsole_target is currently statically
allocated with a size of MAX_USERDATA_ITEMS * MAX_EXTRADATA_ENTRY_LEN
(16 * 256 = 4096 bytes). This wastes memory when userdata entries are
not used or when only a few entries are configured, which is common in
typical usage scenarios. It also forces us to keep MAX_USERDATA_ITEMS
small to limit the memory wasted.
Change the userdata buffer from a static array to a dynamically
allocated pointer. The buffer is now allocated on-demand in
update_userdata() whenever userdata entries are added, modified, or
removed via configfs. The implementation calculates the exact size
needed for all current userdata entries, allocates a new buffer of that
size, formats the entries into it, and atomically swaps it with the old
buffer.
This approach provides several benefits:
- Memory efficiency: Targets with no userdata use zero bytes instead of
4KB, and targets with userdata only allocate what they need;
- Scalability: Makes it practical to increase MAX_USERDATA_ITEMS to a
much larger value without imposing a fixed memory cost on every
target;
- No hot-path overhead: Allocation occurs during configuration (write to
configfs), not during message transmission
If memory allocation fails during userdata update, -ENOMEM is returned
to userspace through the configfs attribute write operation.
The sysdata buffer remains statically allocated since it has a smaller
fixed size (MAX_SYSDATA_ITEMS * MAX_EXTRADATA_ENTRY_LEN = 4 * 256 = 1024
bytes) and its content length is less predictable.
Signed-off-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251119-netconsole_dynamic_extradata-v3-3-497ac3191707@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Separate userdata and sysdata into distinct buffers to enable independent
management. Previously, both were stored in a single extradata_complete
buffer with a fixed size that accommodated both types of data.
This separation allows:
- userdata to grow dynamically (in subsequent patch)
- sysdata to remain in a small static buffer
- removal of complex entry counting logic that tracked both types together
The split also simplifies the code by eliminating the need to check total
entry count across both userdata and sysdata when enabling features,
which allows to drop holding su_mutex on sysdata_*_enabled_store().
No functional change in this patch, just structural preparation for
dynamic userdata allocation.
Signed-off-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251119-netconsole_dynamic_extradata-v3-2-497ac3191707@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor send_fragmented_body() to use separate offset tracking for
msgbody, and extradata instead of complex conditional logic.
The previous implementation used boolean flags and calculated offsets
which made the code harder to follow.
The new implementation maintains independent offset counters
(msgbody_offset, extradata_offset) and processes each section
sequentially, making the data flow more straightforward and the code
easier to maintain.
This is a preparatory refactoring with no functional changes, which will
allow easily splitting extradata_complete into separate userdata and
sysdata buffers in the next patch.
Signed-off-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251119-netconsole_dynamic_extradata-v3-1-497ac3191707@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are two sets of macros used to define the status bits of TX and RX
BDs, one is the BD_SC_xx macros, the other one is the BD_ENET_xx macros.
For the BD_SC_xx macros, only BD_SC_WRAP is used in the driver. But the
BD_ENET_xx macros are more widely used in the driver, and they define
more bits of the BD status. Therefore, remove the BD_SC_xx macros from
now on.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251119025148.2817602-6-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The rx_align was introduced by the commit 41ef84ce4c ("net: fec: change
FEC alignment according to i.mx6 sx requirement"). Because the i.MX6 SX
requires RX buffer must be 64 bytes alignment.
Since the commit 95698ff617 ("net: fec: using page pool to manage RX
buffers"), the address of the RX buffer is always the page address plus
FEC_ENET_XDP_HEADROOM which is 256 bytes, so the RX buffer is always
64-byte aligned. Therefore, rx_align has no effect since that commit,
and we can safely remove it.
In addition, to prevent future modifications to FEC_ENET_XDP_HEADROOM,
a BUILD_BUG_ON() test has been added to the driver, which ensures that
FEC_ENET_XDP_HEADROOM provides the required alignment.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20251119025148.2817602-5-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The struct fec_enet_priv_txrx_info has three members: offset, page and
skb. The offset is only initialized in the driver and is not used, the
skb is never initialized and used in the driver. The both will not be
used in the future. Therefore, replace struct fec_enet_priv_txrx_info
directly with struct page.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251119025148.2817602-4-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
From the Kconfig file, we can see CONFIG_FEC depends on the following
platform-related options.
ColdFire: M523x, M527x, M5272, M528x, M520x and M532x
S32: ARCH_S32 (ARM64)
i.MX: SOC_IMX28 and ARCH_MXC (ARM and ARM64)
Based on the code of fec driver, only some macro definitions on the
M5272 platform are different from those on other platforms. Therefore,
we can simplify the following complex preprocessor directives to
"if !defined(CONFIG_M5272)".
"#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || \
defined(CONFIG_M528x) || defined(CONFIG_M520x) || \
defined(CONFIG_M532x) || defined(CONFIG_ARM) || \
defined(CONFIG_ARM64)"
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20251119025148.2817602-3-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The conditional preprocessor directive was added to fix build errors on
the MCF5272 platform, see commit d13919301d ("net: fec: Fix build for
MCF5272"). The compilation errors were originally caused by some register
macros not being defined on that platform.
The driver now uses quirks to dynamically handle platform differences,
and for MCF5272, its quirks is 0, so it does not support RACC and GBIT
Ethernet. So these preprocessor directives are no longer required and
can be safely removed without causing build or functional issue.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20251119025148.2817602-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Value CRSM_SFT_PD written to Software Power-Down Control Register
(CRSM_SFT_PD_CNTRL) is 0x01 and therefor different to value
CRSM_SFT_PD_RDY (0x02) read from System Status Register (CRSM_STAT) for
confirmation powerdown has been reached.
The condition could have only worked when disabling powerdown
(both 0x00), but never when enabling it (0x01 != 0x02).
Result is a timeout, like so:
$ ifdown eth0
macb f802c000.ethernet eth0: Link is Down
ADIN1100 f802c000.ethernet-ffffffff:01: adin_set_powerdown_mode failed: -110
ADIN1100 f802c000.ethernet-ffffffff:01: adin_set_powerdown_mode failed: -110
Fixes: 7eaf913299 ("net: phy: adin1100: Add initial support for ADIN1100 industrial PHY")
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20251119124737.280939-2-ada@thorsis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the call to stmmac_axi_blen_to_mask() out of the individual
MAC version drivers into the main code in stmmac_init_dma_engine(),
passing the resulting value through a new member, axi_blen_regval,
in the struct stmmac_axi structure.
There is now no need for stmmac_axi_blen_to_dma_mask() to use
u32p_replace_bits(), so use FIELD_PREP() instead.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vLfLW-0000000FMb1-0zKV@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Provide a common stmmac_axi_blen_to_mask() function to translate the
burst length array to the value for the AXI bus mode register, and use
it for dwmac, dwmac4 and dwxgmac2. Remove the now unnecessary
XGMAC_BLEN* definitions.
Note that stmmac_axi_blen_to_dma_mask() is coded to be more efficient
than the original three implementations, and verifies the contents of
the burst length array.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vLfLR-0000000FMav-0VL6@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simplify the switch() statement in dwc_eth_dwmac_config_dt().
Although this is not speed-critical, simplifying it can make it more
readable. This also drastically improves the code emitted by the
compiler.
On aarch64, with the original code, the compiler loads registers with
every possible value, and then has a tree of test-and-branch statements
to work out which register to store. With the simplified code, the
compiler can load a register with '4' and shift it appropriately.
This shrinks the text size on aarch64 from 4289 bytes to 4153 bytes,
a reduction of 3%.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vLfLG-0000000FMai-3fKz@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
