bpf_cookie and find_vma are flaky in nested VMs, which is used by some CI
systems. It turns out these failures are caused by unreliable perf event
in nested VM. Fix these by:
1. Use PERF_COUNT_SW_CPU_CLOCK in find_vma;
2. Increase sample_freq in bpf_cookie.
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240604070700.3032142-1-song@kernel.org
Make sure that BPF programs can declare global kptr arrays and kptr fields
in struct types that is the type of a global variable or the type of a
nested descendant field in a global variable.
An array with only one element is special case, that it treats the element
like a non-array kptr field. Nested arrays are also tested to ensure they
are handled properly.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240523174202.461236-8-thinker.li@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Verify whether a user space program is informed through epoll with EPOLLHUP
when a struct_ops object is detached.
The BPF code in selftests/bpf/progs/struct_ops_module.c has become
complex. Therefore, struct_ops_detach.c has been added to segregate the BPF
code for detachment tests from the BPF code for other tests based on the
recommendation of Andrii Nakryiko.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240530065946.979330-6-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Pass an additional pointer of bpf_struct_ops_link to callback function reg,
unreg, and update provided by subsystems defined in bpf_struct_ops. A
bpf_struct_ops_map can be registered for multiple links. Passing a pointer
of bpf_struct_ops_link helps subsystems to distinguish them.
This pointer will be used in the later patches to let the subsystem
initiate a detachment on a link that was registered to it previously.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240530065946.979330-2-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add test cases for the bits iter:
- Positive cases
- Bit mask representing a single word (8-byte unit)
- Bit mask representing data spanning more than one word
- The index of the set bit
- Nagative cases
- bpf_iter_bits_destroy() is required after calling
bpf_iter_bits_new()
- bpf_iter_bits_destroy() can only destroy an initialized iter
- bpf_iter_bits_next() must use an initialized iter
- Bit mask representing zero words
- Bit mask representing fewer words than expected
- Case for ENOMEM
- Case for NULL pointer
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240517023034.48138-3-laoar.shao@gmail.com
This patch uses new helper start_server_str() in do_test() in bpf_tcp_ca.c
to accept a struct network_helper_opts argument instead of using
start_server() and settcpca(). Then change the type of the first paramenter
of do_test() into a struct network_helper_opts one.
Define its own cb_opts and opts for each test, set its own cc name into
cb_opts.cc, and cc_cb() into post_socket_cb callback, then pass it to
do_test().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/6e1b6555e3284e77c8aa60668c61a66c5f99aa37.1716638248.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Since the post_socket_cb() callback is added in struct network_helper_opts,
it's make sense to use it not only in __start_server(), but also in
connect_to_fd_opts(). Then it can be used to set TCP_CONGESTION sockopt.
Add a "void *" type member cb_opts into struct network_helper_opts, and add
a new struct named cb_opts in prog_tests/bpf_tcp_ca.c, then cc can be moved
into struct cb_opts from network_helper_opts. Define a new callback cc_cb()
to set TCP_CONGESTION sockopt, and set it to post_socket_cb pointer of opts.
Define a new cb_opts cubic, set it to cb_opts of opts. Pass this opts to
connect_to_fd_opts() in test_dctcp_fallback().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/b512bb8d8f6854c9ea5c409b69d1bf37c6f272c6.1716638248.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-05-28
We've added 23 non-merge commits during the last 11 day(s) which contain
a total of 45 files changed, 696 insertions(+), 277 deletions(-).
The main changes are:
1) Rename skb's mono_delivery_time to tstamp_type for extensibility
and add SKB_CLOCK_TAI type support to bpf_skb_set_tstamp(),
from Abhishek Chauhan.
2) Add netfilter CT zone ID and direction to bpf_ct_opts so that arbitrary
CT zones can be used from XDP/tc BPF netfilter CT helper functions,
from Brad Cowie.
3) Several tweaks to the instruction-set.rst IETF doc to address
the Last Call review comments, from Dave Thaler.
4) Small batch of riscv64 BPF JIT optimizations in order to emit more
compressed instructions to the JITed image for better icache efficiency,
from Xiao Wang.
5) Sort bpftool C dump output from BTF, aiming to simplify vmlinux.h
diffing and forcing more natural type definitions ordering,
from Mykyta Yatsenko.
6) Use DEV_STATS_INC() macro in BPF redirect helpers to silence
a syzbot/KCSAN race report for the tx_errors counter,
from Jiang Yunshui.
7) Un-constify bpf_func_info in bpftool to fix compilation with LLVM 17+
which started treating const structs as constants and thus breaking
full BTF program name resolution, from Ivan Babrou.
8) Fix up BPF program numbers in test_sockmap selftest in order to reduce
some of the test-internal array sizes, from Geliang Tang.
9) Small cleanup in Makefile.btf script to use test-ge check for v1.25-only
pahole, from Alan Maguire.
10) Fix bpftool's make dependencies for vmlinux.h in order to avoid needless
rebuilds in some corner cases, from Artem Savkov.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (23 commits)
bpf, net: Use DEV_STAT_INC()
bpf, docs: Fix instruction.rst indentation
bpf, docs: Clarify call local offset
bpf, docs: Add table captions
bpf, docs: clarify sign extension of 64-bit use of 32-bit imm
bpf, docs: Use RFC 2119 language for ISA requirements
bpf, docs: Move sentence about returning R0 to abi.rst
bpf: constify member bpf_sysctl_kern:: Table
riscv, bpf: Try RVC for reg move within BPF_CMPXCHG JIT
riscv, bpf: Use STACK_ALIGN macro for size rounding up
riscv, bpf: Optimize zextw insn with Zba extension
selftests/bpf: Handle forwarding of UDP CLOCK_TAI packets
net: Add additional bit to support clockid_t timestamp type
net: Rename mono_delivery_time to tstamp_type for scalabilty
selftests/bpf: Update tests for new ct zone opts for nf_conntrack kfuncs
net: netfilter: Make ct zone opts configurable for bpf ct helpers
selftests/bpf: Fix prog numbers in test_sockmap
bpf: Remove unused variable "prev_state"
bpftool: Un-const bpf_func_info to fix it for llvm 17 and newer
bpf: Fix order of args in call to bpf_map_kvcalloc
...
====================
Link: https://lore.kernel.org/r/20240528105924.30905-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tstamp_type is now set based on actual clockid_t compressed
into 2 bits.
To make the design scalable for future needs this commit bring in
the change to extend the tstamp_type:1 to tstamp_type:2 to support
other clockid_t timestamp.
We now support CLOCK_TAI as part of tstamp_type as part of this
commit with existing support CLOCK_MONOTONIC and CLOCK_REALTIME.
Signed-off-by: Abhishek Chauhan <quic_abchauha@quicinc.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240509211834.3235191-3-quic_abchauha@quicinc.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Pull networking fixes from Paolo Abeni:
"Quite smaller than usual. Notably it includes the fix for the unix
regression from the past weeks. The TCP window fix will require some
follow-up, already queued.
Current release - regressions:
- af_unix: fix garbage collection of embryos
Previous releases - regressions:
- af_unix: fix race between GC and receive path
- ipv6: sr: fix missing sk_buff release in seg6_input_core
- tcp: remove 64 KByte limit for initial tp->rcv_wnd value
- eth: r8169: fix rx hangup
- eth: lan966x: remove ptp traps in case the ptp is not enabled
- eth: ixgbe: fix link breakage vs cisco switches
- eth: ice: prevent ethtool from corrupting the channels
Previous releases - always broken:
- openvswitch: set the skbuff pkt_type for proper pmtud support
- tcp: Fix shift-out-of-bounds in dctcp_update_alpha()
Misc:
- a bunch of selftests stabilization patches"
* tag 'net-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (25 commits)
r8169: Fix possible ring buffer corruption on fragmented Tx packets.
idpf: Interpret .set_channels() input differently
ice: Interpret .set_channels() input differently
nfc: nci: Fix handling of zero-length payload packets in nci_rx_work()
net: relax socket state check at accept time.
tcp: remove 64 KByte limit for initial tp->rcv_wnd value
net: ti: icssg_prueth: Fix NULL pointer dereference in prueth_probe()
tls: fix missing memory barrier in tls_init
net: fec: avoid lock evasion when reading pps_enable
Revert "ixgbe: Manual AN-37 for troublesome link partners for X550 SFI"
testing: net-drv: use stats64 for testing
net: mana: Fix the extra HZ in mana_hwc_send_request
net: lan966x: Remove ptp traps in case the ptp is not enabled.
openvswitch: Set the skbuff pkt_type for proper pmtud support.
selftest: af_unix: Make SCM_RIGHTS into OOB data.
af_unix: Fix garbage collection of embryos carrying OOB with SCM_RIGHTS
tcp: Fix shift-out-of-bounds in dctcp_update_alpha().
selftests/net: use tc rule to filter the na packet
ipv6: sr: fix memleak in seg6_hmac_init_algo
af_unix: Update unix_sk(sk)->oob_skb under sk_receive_queue lock.
...
Pull tracing tool fix from Steven Rostedt:
"Fix printf format warnings in latency-collector.
Use the printf format string with %s to take a string instead of
taking in a string directly"
* tag 'trace-tools-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tools/latency-collector: Fix -Wformat-security compile warns
Fix the following -Wformat-security compile warnings adding missing
format arguments:
latency-collector.c: In function ‘show_available’:
latency-collector.c:938:17: warning: format not a string literal and
no format arguments [-Wformat-security]
938 | warnx(no_tracer_msg);
| ^~~~~
latency-collector.c:943:17: warning: format not a string literal and
no format arguments [-Wformat-security]
943 | warnx(no_latency_tr_msg);
| ^~~~~
latency-collector.c: In function ‘find_default_tracer’:
latency-collector.c:986:25: warning: format not a string literal and
no format arguments [-Wformat-security]
986 | errx(EXIT_FAILURE, no_tracer_msg);
|
^~~~
latency-collector.c: In function ‘scan_arguments’:
latency-collector.c:1881:33: warning: format not a string literal and
no format arguments [-Wformat-security]
1881 | errx(EXIT_FAILURE, no_tracer_msg);
| ^~~~
Link: https://lore.kernel.org/linux-trace-kernel/20240404011009.32945-1-skhan@linuxfoundation.org
Cc: stable@vger.kernel.org
Fixes: e23db805da ("tracing/tools: Add the latency-collector to tools directory")
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Testing a network device that has large numbers of bytes/packets may
overflow. Using stats64 when comparing fixes this problem.
I tripped on this while iterating on a qstats patch for mlx5. See below
for confirmation without my added code that this is a bug.
Before this patch (with added debugging output):
$ NETIF=eth0 tools/testing/selftests/drivers/net/stats.py
KTAP version 1
1..4
ok 1 stats.check_pause
ok 2 stats.check_fec
rstat: 481708634 qstat: 666201639514 key: tx-bytes
not ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
Note the huge delta above ^^^ in the rtnl vs qstats.
After this patch:
$ NETIF=eth0 tools/testing/selftests/drivers/net/stats.py
KTAP version 1
1..4
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
It looks like rtnl_fill_stats in net/core/rtnetlink.c will attempt to
copy the 64bit stats into a 32bit structure which is probably why this
behavior is occurring.
To show this is happening, you can get the underlying stats that the
stats.py test uses like this:
$ ./cli.py --spec ../../../Documentation/netlink/specs/rt_link.yaml \
--do getlink --json '{"ifi-index": 7}'
And examine the output (heavily snipped to show relevant fields):
'stats': {
'multicast': 3739197,
'rx-bytes': 1201525399,
'rx-packets': 56807158,
'tx-bytes': 492404458,
'tx-packets': 1200285371,
'stats64': {
'multicast': 3739197,
'rx-bytes': 35561263767,
'rx-packets': 56807158,
'tx-bytes': 666212335338,
'tx-packets': 1200285371,
The stats.py test prior to this patch was using the 'stats' structure
above, which matches the failure output on my system.
Comparing side by side, rx-bytes and tx-bytes, and getting ethtool -S
output:
rx-bytes stats: 1201525399
rx-bytes stats64: 35561263767
rx-bytes ethtool: 36203402638
tx-bytes stats: 492404458
tx-bytes stats64: 666212335338
tx-bytes ethtool: 666215360113
Note that the above was taken from a system with an mlx5 NIC, which only
exposes ndo_get_stats64.
Based on the ethtool output and qstat output, it appears that stats.py
should be updated to use the 'stats64' structure for accurate
comparisons when packet/byte counters get very large.
To confirm that this was not related to the qstats code I was iterating
on, I booted a kernel without my driver changes and re-ran the test
which shows the qstats are skipped (as they don't exist for mlx5):
NETIF=eth0 tools/testing/selftests/drivers/net/stats.py
KTAP version 1
1..4
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum # SKIP qstats not supported by the device
ok 4 stats.qstat_by_ifindex # SKIP No ifindex supports qstats
But, fetching the stats using the CLI
$ ./cli.py --spec ../../../Documentation/netlink/specs/rt_link.yaml \
--do getlink --json '{"ifi-index": 7}'
Shows the same issue (heavily snipped for relevant fields only):
'stats': {
'multicast': 105489,
'rx-bytes': 530879526,
'rx-packets': 751415,
'tx-bytes': 2510191396,
'tx-packets': 27700323,
'stats64': {
'multicast': 105489,
'rx-bytes': 530879526,
'rx-packets': 751415,
'tx-bytes': 15395093284,
'tx-packets': 27700323,
Comparing side by side with ethtool -S on the unmodified mlx5 driver:
tx-bytes stats: 2510191396
tx-bytes stats64: 15395093284
tx-bytes ethtool: 17718435810
Fixes: f0e6c86e4b ("testing: net-drv: add a driver test for stats reporting")
Signed-off-by: Joe Damato <jdamato@fastly.com>
Link: https://lore.kernel.org/r/20240520235850.190041-1-jdamato@fastly.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pull more non-mm updates from Andrew Morton:
- A series ("kbuild: enable more warnings by default") from Arnd
Bergmann which enables a number of additional build-time warnings. We
fixed all the fallout which we could find, there may still be a few
stragglers.
- Samuel Holland has developed the series "Unified cross-architecture
kernel-mode FPU API". This does a lot of consolidation of
per-architecture kernel-mode FPU usage and enables the use of newer
AMD GPUs on RISC-V.
- Tao Su has fixed some selftests build warnings in the series
"Selftests: Fix compilation warnings due to missing _GNU_SOURCE
definition".
- This pull also includes a nilfs2 fixup from Ryusuke Konishi.
* tag 'mm-nonmm-stable-2024-05-22-17-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (23 commits)
nilfs2: make block erasure safe in nilfs_finish_roll_forward()
selftests/harness: use 1024 in place of LINE_MAX
Revert "selftests/harness: remove use of LINE_MAX"
selftests/fpu: allow building on other architectures
selftests/fpu: move FP code to a separate translation unit
drm/amd/display: use ARCH_HAS_KERNEL_FPU_SUPPORT
drm/amd/display: only use hard-float, not altivec on powerpc
riscv: add support for kernel-mode FPU
x86: implement ARCH_HAS_KERNEL_FPU_SUPPORT
powerpc: implement ARCH_HAS_KERNEL_FPU_SUPPORT
LoongArch: implement ARCH_HAS_KERNEL_FPU_SUPPORT
lib/raid6: use CC_FLAGS_FPU for NEON CFLAGS
arm64: crypto: use CC_FLAGS_FPU for NEON CFLAGS
arm64: implement ARCH_HAS_KERNEL_FPU_SUPPORT
ARM: crypto: use CC_FLAGS_FPU for NEON CFLAGS
ARM: implement ARCH_HAS_KERNEL_FPU_SUPPORT
arch: add ARCH_HAS_KERNEL_FPU_SUPPORT
x86/fpu: fix asm/fpu/types.h include guard
kbuild: enable -Wcast-function-type-strict unconditionally
kbuild: enable -Wformat-truncation on clang
...
Add test for allocating and looking up ct entry in a
non-default ct zone with kfuncs bpf_{xdp,skb}_ct_alloc
and bpf_{xdp,skb}_ct_lookup.
Add negative tests for looking up ct entry in a different
ct zone to where it was allocated and with a different
direction.
Update reserved test for old struct definition to test for
ct_zone_id being set when opts size isn't NF_BPF_CT_OPTS_SZ (16).
Signed-off-by: Brad Cowie <brad@faucet.nz>
Link: https://lore.kernel.org/r/20240522050712.732558-2-brad@faucet.nz
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.10-rc1. Nothing major here, just lots of new drivers and updates
for apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
misc: ntsync: mark driver as "broken" to prevent from building
spmi: pmic-arb: Add multi bus support
spmi: pmic-arb: Register controller for bus instead of arbiter
spmi: pmic-arb: Make core resources acquiring a version operation
spmi: pmic-arb: Make the APID init a version operation
spmi: pmic-arb: Fix some compile warnings about members not being described
dt-bindings: spmi: Deprecate qcom,bus-id
dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
spmi: hisi-spmi-controller: Do not override device identifier
dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
spmi: make spmi_bus_type const
extcon: adc-jack: Document missing struct members
extcon: realtek: Remove unused of_gpio.h
extcon: usbc-cros-ec: Convert to platform remove callback returning void
extcon: usb-gpio: Convert to platform remove callback returning void
extcon: max77843: Convert to platform remove callback returning void
extcon: max3355: Convert to platform remove callback returning void
extcon: intel-mrfld: Convert to platform remove callback returning void
...
Pull perf tools updates from Arnaldo Carvalho de Melo:
"General:
- Integrate the shellcheck utility with the build of perf to allow
catching shell problems early in areas such as 'perf test', 'perf
trace' scrape scripts, etc
- Add 'uretprobe' variant in the 'perf bench uprobe' tool
- Add script to run instances of 'perf script' in parallel
- Allow parsing tracepoint names that start with digits, such as
9p/9p_client_req, etc. Make sure 'perf test' tests it even on
systems where those tracepoints aren't available
- Add Kan Liang to MAINTAINERS as a perf tools reviewer
- Add support for using the 'capstone' disassembler library in
various tools, such as 'perf script' and 'perf annotate'. This is
an alternative for the use of the 'xed' and 'objdump' disassemblers
Data-type profiling improvements:
- Resolve types for a->b->c by backtracking the assignments until it
finds DWARF info for one of those members
- Support for global variables, keeping a cache to speed up lookups
- Handle the 'call' instruction, dealing with effects on registers
and handling its return when tracking register data types
- Handle x86's segment based addressing like %gs:0x28, to support
things like per CPU variables, the stack canary, etc
- Data-type profiling got big speedups when using capstone for
disassembling. The objdump outoput parsing method is left as a
fallback when capstone fails or isn't available. There are patches
posted for 6.11 that to use a LLVM disassembler
- Support event group display in the TUI when annotating types with
--data-type, for instance to show memory load and store events for
the data type fields
- Optimize the 'perf annotate' data structures, reducing memory usage
- Add a initial 'perf test' for 'perf annotate', checking that a
target symbol appears on the output, specifying objdump via the
command line, etc
Vendor Events:
- Update Intel JSON files for Cascade Lake X, Emerald Rapids, Grand
Ridge, Ice Lake X, Lunar Lake, Meteor Lake, Sapphire Rapids, Sierra
Forest, Sky Lake X, Sky Lake and Snow Ridge X. Remove info metrics
erroneously in TopdownL1
- Add AMD's Zen 5 core and uncore events and metrics. Those come from
the "Performance Monitor Counters for AMD Family 1Ah Model 00h- 0Fh
Processors" document, with events that capture information on op
dispatch, execution and retirement, branch prediction, L1 and L2
cache activity, TLB activity, etc
- Mark L1D_CACHE_INVAL impacted by errata for ARM64's AmpereOne/
AmpereOneX
Miscellaneous:
- Sync header copies with the kernel sources
- Move some header copies used only for generating translation string
tables for ioctl cmds and other syscall integer arguments to a new
directory under tools/perf/beauty/, to separate from copies in
tools/include/ that are used to build the tools
- Introduce scrape script for several syscall 'flags'/'mask'
arguments
- Improve cpumap utilization, fixing up pairing of refcounts, using
the right iterators (perf_cpu_map__for_each_cpu), etc
- Give more details about raw event encodings in 'perf list', show
tracepoint encoding in the detailed output
- Refactor the DSOs handling code, reducing memory usage
- Document the BPF event modifier and add a 'perf test' for it
- Improve the event parser, better error messages and add further
'perf test's for it
- Add reference count checking to 'struct comm_str' and 'struct
mem_info'
- Make ARM64's 'perf test' entries for the Neoverse N1 more robust
- Tweak the ARM64's Coresight 'perf test's
- Improve ARM64's CoreSight ETM version detection and error reporting
- Fix handling of symbols when using kcore
- Fix PAI (Processor Activity Instrumentation) counter names for s390
virtual machines in 'perf report'
- Fix -g/--call-graph option failure in 'perf sched timehist'
- Add LIBTRACEEVENT_DIR build option to allow building with
libtraceevent installed in non-standard directories, such as when
doing cross builds
- Various 'perf test' and 'perf bench' fixes
- Improve 'perf probe' error message for long C++ probe names"
* tag 'perf-tools-for-v6.10-1-2024-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (260 commits)
tools lib subcmd: Show parent options in help
perf pmu: Count sys and cpuid JSON events separately
perf stat: Don't display metric header for non-leader uncore events
perf annotate-data: Ensure the number of type histograms
perf annotate: Fix segfault on sample histogram
perf daemon: Fix file leak in daemon_session__control
libsubcmd: Fix parse-options memory leak
perf lock: Avoid memory leaks from strdup()
perf sched: Rename 'switches' column header to 'count' and add usage description, options for latency
perf tools: Ignore deleted cgroups
perf parse: Allow tracepoint names to start with digits
perf parse-events: Add new 'fake_tp' parameter for tests
perf parse-events: pass parse_state to add_tracepoint
perf symbols: Fix ownership of string in dso__load_vmlinux()
perf symbols: Update kcore map before merging in remaining symbols
perf maps: Re-use __maps__free_maps_by_name()
perf symbols: Remove map from list before updating addresses
perf tracepoint: Don't scan all tracepoints to test if one exists
perf dwarf-aux: Fix build with HAVE_DWARF_CFI_SUPPORT
perf thread: Fixes to thread__new() related to initializing comm
...
bpf_prog5 and bpf_prog7 are removed from progs/test_sockmap_kern.h in
commit d79a32129b ("bpf: Selftests, remove prints from sockmap tests"),
now there are only 9 progs in it, not 11:
SEC("sk_skb1")
int bpf_prog1(struct __sk_buff *skb)
SEC("sk_skb2")
int bpf_prog2(struct __sk_buff *skb)
SEC("sk_skb3")
int bpf_prog3(struct __sk_buff *skb)
SEC("sockops")
int bpf_sockmap(struct bpf_sock_ops *skops)
SEC("sk_msg1")
int bpf_prog4(struct sk_msg_md *msg)
SEC("sk_msg2")
int bpf_prog6(struct sk_msg_md *msg)
SEC("sk_msg3")
int bpf_prog8(struct sk_msg_md *msg)
SEC("sk_msg4")
int bpf_prog9(struct sk_msg_md *msg)
SEC("sk_msg5")
int bpf_prog10(struct sk_msg_md *msg)
This patch updates the array sizes of prog_fd[], prog_attach_type[] and
prog_type[] from 11 to 9 accordingly.
Fixes: d79a32129b ("bpf: Selftests, remove prints from sockmap tests")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/9c10d9f974f07fcb354a43a8eca67acb2fafc587.1715926605.git.tanggeliang@kylinos.cn
scm_rights.c covers various test cases for inflight file descriptors
and garbage collector for AF_UNIX sockets.
Currently, SCM_RIGHTS messages are sent with 3-bytes string, and it's
not good for MSG_OOB cases, as SCM_RIGTS cmsg goes with the first 2-bytes,
which is non-OOB data.
Let's send SCM_RIGHTS messages with 1-byte character to pack SCM_RIGHTS
into OOB data.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Test arp_ndisc_untracked_subnets use tcpdump to filter the unsolicited
and untracked na messages. It set -e before calling tcpdump. But if
tcpdump filters 0 packet, it will return none zero, and cause the script
to exit.
Instead of using slow tcpdump to capture packets, let's using tc rule
to filter out the na message.
At the same time, fix function setup_v6 which only needs one parameter.
Move all the related helpers from forwarding lib.sh to net lib.sh.
Fixes: 0ea7b0a454 ("selftests: net: arp_ndisc_untracked_subnets: test for arp_accept and accept_untracked_na")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240517010327.2631319-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pull asm-generic cleanups from Arnd Bergmann:
"These are a few cross-architecture cleanup patches:
- separate out fbdev support from the asm/video.h contents that may
be used by either the old fbdev drivers or the newer drm display
code (Thomas Zimmermann)
- cleanups for the generic bitops code and asm-generic/bug.h
(Thorsten Blum)
- remove the orphaned include/asm-generic/page.h header that used to
be included by long-removed mmu-less architectures (me)"
* tag 'asm-generic-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
arch: Fix name collision with ACPI's video.o
bug: Improve comment
asm-generic: remove unused asm-generic/page.h
arch: Rename fbdev header and source files
arch: Remove struct fb_info from video helpers
arch: Select fbdev helpers with CONFIG_VIDEO
bitops: Change function return types from long to int
Pull kselftest fixes from Shuah Khan:
"Revert framework change to add D_GNU_SOURCE to KHDR_INCLUDES to
Makefile, lib.mk, and kselftest_harness.h and follow-on changes to
cgroup and sgx test as they are causing build failures and warnings"
* tag 'linux_kselftest-next-6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Revert "selftests/cgroup: Drop define _GNU_SOURCE"
Revert "selftests/sgx: Include KHDR_INCLUDES in Makefile"
Revert "selftests: Compile kselftest headers with -D_GNU_SOURCE"
This reverts commit c1457d9aad.
The framework change to add D_GNU_SOURCE to KHDR_INCLUDES
to Makefile, lib.mk, and kselftest_harness.h is reverted
as it is causing build failures and warnings.
Revert this change as this change depends on the framework
change.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This reverts commit 2c3b8f8f37.
The framework change to add D_GNU_SOURCE to KHDR_INCLUDES
to Makefile, lib.mk, and kselftest_harness.h is reverted
as it is causing build failures and warnings.
Revert this change as this change depends on the framework
change.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This reverts commit daef47b89e.
This framework change to add D_GNU_SOURCE to KHDR_INCLUDES
to Makefile, lib.mk, and kselftest_harness.h is causing build
failures and warnings.
Revert this change.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The amt.sh requires smcrouted for multicasting routing.
So, it starts smcrouted before forwarding tests.
It must be stopped after all tests, but it isn't.
To fix this issue, it kills smcrouted in the cleanup logic.
Fixes: c08e8baea7 ("selftests: add amt interface selftest script")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
