Kalle Valo says:
====================
wireless-next patches for v6.14
Multi-Link Operation implementation continues, both in stack and in
drivers. Otherwise it has been relatively quiet.
Major changes:
cfg80211/mac80211
- define wiphy guard
- get TX power per link
- EHT 320 MHz channel support for mesh
ath11k
- QCA6698AQ support
ath9k
- RX inactivity detection
rtl8xxxu
- add more USB device IDs
rtw88
- add more USB device IDs
- enable USB RX aggregation and USB 3 to improve performance
rtw89
- PowerSave flow for Multi-Link Operation
* tag 'wireless-next-2024-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (121 commits)
wifi: wlcore: sysfs: constify 'struct bin_attribute'
wifi: brcmfmac: clarify unmodifiable headroom log message
wifi: brcmfmac: add missing header include for brcmf_dbg
wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy()
wifi: qtnfmac: fix spelling error in core.h
wifi: rtw89: phy: add dummy C2H event handler for report of TAS power
wifi: rtw89: 8851b: rfk: remove unnecessary assignment of return value of _dpk_dgain_read()
wifi: rtw89: 8852c: rfk: refine target channel calculation in _rx_dck_channel_calc()
wifi: rtlwifi: pci: wait for firmware loading before releasing memory
wifi: rtlwifi: fix memory leaks and invalid access at probe error path
wifi: rtlwifi: destroy workqueue at rtl_deinit_core
wifi: rtlwifi: remove unused check_buddy_priv
wifi: rtw89: 8922a: update format of RFK pre-notify H2C command v2
wifi: rtw89: regd: update regulatory map to R68-R51
wifi: rtw89: 8852c: disable ER SU when 4x HE-LTF and 0.8 GI capability differ
wifi: rtw89: disable firmware training HE GI and LTF
wifi: rtw89: ps: update data for firmware and settings for hardware before/after PS
wifi: rtw89: ps: refactor channel info to firmware before entering PS
wifi: rtw89: ps: refactor PS flow to support MLO
wifi: mwifiex: decrease timeout waiting for host sleep from 10s to 5s
...
====================
Link: https://patch.msgid.link/20241219185709.774EDC4CECE@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
ice: add support for devlink health events
Przemek Kitszel says:
Reports for two kinds of events are implemented, Malicious Driver
Detection (MDD) and Tx hang.
Patches 1, 2, 3: core improvements (checkpatch.pl, devlink extension)
Patch 4: rename current ice devlink/ files
Patches 5, 6, 7: ice devlink health infra + reporters
Mateusz did good job caring for this series, and hardening the code.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Add MDD logging via devlink health
ice: add Tx hang devlink health reporter
ice: rename devlink_port.[ch] to port.[ch]
devlink: add devlink_fmsg_dump_skb() function
devlink: add devlink_fmsg_put() macro
checkpatch: don't complain on _Generic() use
====================
Link: https://patch.msgid.link/20241217210835.3702003-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add devlink_fmsg_dump_skb() function that adds some diagnostic
information about skb (like length, pkt type, MAC, etc) to devlink
fmsg mechanism using bunch of devlink_fmsg_put() function calls.
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The Linux socket API currently allows setting SO_PRIORITY at the
socket level, applying a uniform priority to all packets sent through
that socket. The exception to this is IP_TOS, when the priority value
is calculated during the handling of
ancillary data, as implemented in commit f02db315b8 ("ipv4: IP_TOS
and IP_TTL can be specified as ancillary data").
However, this is a computed
value, and there is currently no mechanism to set a custom priority
via control messages prior to this patch.
According to this patch, if SO_PRIORITY is specified as ancillary data,
the packet is sent with the priority value set through
sockc->priority, overriding the socket-level values
set via the traditional setsockopt() method. This is analogous to
the existing support for SO_MARK, as implemented in
commit c6af0c227a ("ip: support SO_MARK cmsg").
If both cmsg SO_PRIORITY and IP_TOS are passed, then the one that
takes precedence is the last one in the cmsg list.
This patch has the side effect that raw_send_hdrinc now interprets cmsg
IP_TOS.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Suggested-by: Ferenc Fejes <fejes@inf.elte.hu>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Link: https://patch.msgid.link/20241213084457.45120-3-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a TLS handshake record carrying a KeyUpdate message is received,
all subsequent records will be encrypted with a new key. We need to
stop decrypting incoming records with the old key, and wait until
userspace provides a new key.
Make a note of this in the RX context just after decrypting that
record, and stop recvmsg/splice calls with EKEYEXPIRED until the new
key is available.
key_update_pending can't be combined with the existing bitfield,
because we will read it locklessly in ->poll.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change introduces netlink notifications for multicast address
changes. The following features are included:
* Addition and deletion of multicast addresses are reported using
RTM_NEWMULTICAST and RTM_DELMULTICAST messages with AF_INET and
AF_INET6.
* Two new notification groups: RTNLGRP_IPV4_MCADDR and
RTNLGRP_IPV6_MCADDR are introduced for receiving these events.
This change allows user space applications (e.g., ip monitor) to
efficiently track multicast group memberships by listening for netlink
events. Previously, applications relied on inefficient polling of
procfs, introducing delays. With netlink notifications, applications
receive realtime updates on multicast group membership changes,
enabling more precise metrics collection and system monitoring.
This change also unlocks the potential for implementing a wide range
of sophisticated multicast related features in user space by allowing
applications to combine kernel provided multicast address information
with user space data and communicate decisions back to the kernel for
more fine grained control. This mechanism can be used for various
purposes, including multicast filtering, IGMP/MLD offload, and
IGMP/MLD snooping.
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Co-developed-by: Patrick Ruddy <pruddy@vyatta.att-mail.com>
Signed-off-by: Patrick Ruddy <pruddy@vyatta.att-mail.com>
Link: https://lore.kernel.org/r/20180906091056.21109-1-pruddy@vyatta.att-mail.com
Signed-off-by: Yuyang Huang <yuyanghuang@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dmabuf dma-addresses should not be dma_sync'd for CPU/device. Typically
its the driver responsibility to dma_sync for CPU, but the driver should
not dma_sync for CPU if the netmem is actually coming from a dmabuf
memory provider.
The page_pool already exposes a helper for dma_sync_for_cpu:
page_pool_dma_sync_for_cpu. Upgrade this existing helper to handle
netmem, and have it skip dma_sync if the memory is from a dmabuf memory
provider. Drivers should migrate to using this helper when adding
support for netmem.
Also minimize the impact on the dma syncing performance for pages. Special
case the dma-sync path for pages to not go through the overhead checks
for dma-syncing and conversion to netmem.
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20241211212033.1684197-5-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, __xdp_return() takes pointer to the virtual memory to free
a buffer. Apart from that this sometimes provokes redundant
data <--> page conversions, taking data pointer effectively prevents
lots of XDP code to support non-page-backed buffers, as there's no
mapping for the non-host memory (data is always NULL).
Just convert it to always take netmem reference. For
xdp_return_{buff,frame*}(), this chops off one page_address() per each
frag and adds one virt_to_netmem() (same as virt_to_page()) per header
buffer. For __xdp_return() itself, it removes one virt_to_page() for
MEM_TYPE_PAGE_POOL and another one for MEM_TYPE_PAGE_ORDER0, adding
one page_address() for [not really common nowadays]
MEM_TYPE_PAGE_SHARED, but the main effect is that the abovementioned
functions won't die or memleak anymore if the frame has non-host memory
attached and will correctly free those.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241211172649.761483-4-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Initially, xdp_frame::mem.id was used to search for the corresponding
&page_pool to return the page correctly.
However, after that struct page was extended to have a direct pointer
to its PP (netmem has it as well), further keeping of this field makes
no sense. xdp_return_frame_bulk() still used it to do a lookup, and
this leftover is now removed.
Remove xdp_frame::mem and replace it with ::mem_type, as only memory
type still matters and we need to know it to be able to free the frame
correctly.
As a cute side effect, we can now make every scalar field in &xdp_frame
of 4 byte width, speeding up accesses to them.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241211172649.761483-3-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The main reason for this change was to allow mixing pages from different
&page_pools within one &xdp_buff/&xdp_frame. Why not? With stuff like
devmem and io_uring zerocopy Rx, it's required to have separate PPs for
header buffers and payload buffers.
Adjust xdp_return_frame_bulk() and page_pool_put_netmem_bulk(), so that
they won't be tied to a particular pool. Let the latter create a
separate bulk of pages which's PP is different from the first netmem of
the bulk and process it after the main loop.
This greatly optimizes xdp_return_frame_bulk(): no more hashtable
lookups and forced flushes on PP mismatch. Also make
xdp_flush_frame_bulk() inline, as it's just one if + function call + one
u32 read, not worth extending the call ladder.
Co-developed-by: Toke Høiland-Jørgensen <toke@redhat.com> # iterative
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org> # while (count)
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241211172649.761483-2-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add three qdisc-specific drop reasons and use them in sch_cake:
1) SKB_DROP_REASON_QDISC_OVERLIMIT
Whenever the total queue limit for a qdisc instance is exceeded
and a packet is dropped to make room.
2) SKB_DROP_REASON_QDISC_CONGESTED
Whenever a packet is dropped by the qdisc AQM algorithm because
congestion is detected.
3) SKB_DROP_REASON_CAKE_FLOOD
Whenever a packet is dropped by the flood protection part of the
CAKE AQM algorithm (BLUE).
Also use the existing SKB_DROP_REASON_QUEUE_PURGE in cake_clear_tin().
Reasons show up as:
perf record -a -e skb:kfree_skb sleep 1; perf script
iperf3 665 [005] 848.656964: skb:kfree_skb: skbaddr=0xffff98168a333500 rx_sk=(nil) protocol=34525 location=__dev_queue_xmit+0x10f0 reason: QDISC_OVERLIMIT
swapper 0 [001] 909.166055: skb:kfree_skb: skbaddr=0xffff98168280cee0 rx_sk=(nil) protocol=34525 location=cake_dequeue+0x5ef reason: QDISC_CONGESTED
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20241211-cake-drop-reason-v2-1-920afadf4d1b@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- SCO: Fix transparent voice setting
- ISO: Locking fixes
- hci_core: Fix sleeping function called from invalid context
- hci_event: Fix using rcu_read_(un)lock while iterating
- btmtk: avoid UAF in btmtk_process_coredump
* tag 'for-net-2024-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: btmtk: avoid UAF in btmtk_process_coredump
Bluetooth: iso: Fix circular lock in iso_conn_big_sync
Bluetooth: iso: Fix circular lock in iso_listen_bis
Bluetooth: SCO: Add support for 16 bits transparent voice setting
Bluetooth: iso: Fix recursive locking warning
Bluetooth: iso: Always release hdev at the end of iso_listen_bis
Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating
Bluetooth: hci_core: Fix sleeping function called from invalid context
Bluetooth: Improve setsockopt() handling of malformed user input
====================
Link: https://patch.msgid.link/20241212142806.2046274-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The voice setting is used by sco_connect() or sco_conn_defer_accept()
after being set by sco_sock_setsockopt().
The PCM part of the voice setting is used for offload mode through PCM
chipset port.
This commits add support for mSBC 16 bits offloading, i.e. audio data
not transported over HCI.
The BCM4349B1 supports 16 bits transparent data on its I2S port.
If BT_VOICE_TRANSPARENT is used when accepting a SCO connection, this
gives only garbage audio while using BT_VOICE_TRANSPARENT_16BIT gives
correct audio.
This has been tested with connection to iPhone 14 and Samsung S24.
Fixes: ad10b1a487 ("Bluetooth: Add Bluetooth socket voice option")
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix bogus test reports in rpath.sh selftest by adding permanent
neighbor entries, from Phil Sutter.
2) Lockdep reports possible ABBA deadlock in xt_IDLETIMER, fix it by
removing sysfs out of the mutex section, also from Phil Sutter.
3) It is illegal to release basechain via RCU callback, for several
reasons. Keep it simple and safe by calling synchronize_rcu() instead.
This is a partially reverting a botched recent attempt of me to fix
this basechain release path on netdevice removal.
From Florian Westphal.
netfilter pull request 24-12-11
* tag 'nf-24-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: do not defer rule destruction via call_rcu
netfilter: IDLETIMER: Fix for possible ABBA deadlock
selftests: netfilter: Stabilize rpath.sh
====================
Link: https://patch.msgid.link/20241211230130.176937-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Today we have a hardcoded delay of 1 sec before a TIME-WAIT socket can be
reused by reopening a connection. This is a safe choice based on an
assumption that the other TCP timestamp clock frequency, which is unknown
to us, may be as low as 1 Hz (RFC 7323, section 5.4).
However, this means that in the presence of short lived connections with an
RTT of couple of milliseconds, the time during which a 4-tuple is blocked
from reuse can be orders of magnitude longer that the connection lifetime.
Combined with a reduced pool of ephemeral ports, when using
IP_LOCAL_PORT_RANGE to share an egress IP address between hosts [1], the
long TIME-WAIT reuse delay can lead to port exhaustion, where all available
4-tuples are tied up in TIME-WAIT state.
Turn the reuse delay into a per-netns setting so that sysadmins can make
more aggressive assumptions about remote TCP timestamp clock frequency and
shorten the delay in order to allow connections to reincarnate faster.
Note that applications can completely bypass the TIME-WAIT delay protection
already today by locking the local port with bind() before connecting. Such
immediate connection reuse may result in PAWS failing to detect old
duplicate segments, leaving us with just the sequence number check as a
safety net.
This new configurable offers a trade off where the sysadmin can balance
between the risk of PAWS detection failing to act versus exhausting ports
by having sockets tied up in TIME-WAIT state for too long.
[1] https://lpc.events/event/16/contributions/1349/
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20241209-jakub-krn-909-poc-msec-tw-tstamp-v2-2-66aca0eed03e@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare ground for TIME-WAIT socket reuse with subsecond delay.
Today the last TS.Recent update timestamp, recorded in seconds and stored
tp->ts_recent_stamp and tw->tw_ts_recent_stamp fields, has two purposes.
Firstly, it is used to track the age of the last recorded TS.Recent value
to detect when that value becomes outdated due to potential wrap-around of
the other TCP timestamp clock (RFC 7323, section 5.5).
For this purpose a second-based timestamp is completely sufficient as even
in the worst case scenario of a peer using a high resolution microsecond
timestamp, the wrap-around interval is ~36 minutes long.
Secondly, it serves as a threshold value for allowing TIME-WAIT socket
reuse. A TIME-WAIT socket can be reused only once the virtual 1 Hz clock,
ktime_get_seconds, is past the TS.Recent update timestamp.
The purpose behind delaying the TIME-WAIT socket reuse is to wait for the
other TCP timestamp clock to tick at least once before reusing the
connection. It is only then that the PAWS mechanism for the reopened
connection can detect old duplicate segments from the previous connection
incarnation (RFC 7323, appendix B.2).
In this case using a timestamp with second resolution not only blocks the
way toward allowing faster TIME-WAIT reuse after shorter subsecond delay,
but also makes it impossible to reliably delay TW reuse by one second.
As Eric Dumazet has pointed out [1], due to timestamp rounding, the TW
reuse delay will actually be between (0, 1] seconds, and 0.5 seconds on
average. We delay TW reuse for one full second only when last TS.Recent
update coincides with our virtual 1 Hz clock tick.
Considering the above, introduce a dedicated field to store a millisecond
timestamp of transition into the TIME-WAIT state. Place it in an existing
4-byte hole inside inet_timewait_sock structure to avoid an additional
memory cost.
Use the new timestamp to (i) reliably delay TIME-WAIT reuse by one second,
and (ii) prepare for configurable subsecond reuse delay in the subsequent
change.
We assume here that a full one second delay was the original intention in
[2] because it accounts for the worst case scenario of the other TCP using
the slowest recommended 1 Hz timestamp clock.
A more involved alternative would be to change the resolution of the last
TS.Recent update timestamp, tw->tw_ts_recent_stamp, to milliseconds.
[1] https://lore.kernel.org/netdev/CANn89iKB4GFd8sVzCbRttqw_96o3i2wDhX-3DraQtsceNGYwug@mail.gmail.com/
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b8439924316d5bcb266d165b93d632a4b4b859af
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20241209-jakub-krn-909-poc-msec-tw-tstamp-v2-1-66aca0eed03e@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nf_tables_chain_destroy can sleep, it can't be used from call_rcu
callbacks.
Moreover, nf_tables_rule_release() is only safe for error unwinding,
while transaction mutex is held and the to-be-desroyed rule was not
exposed to either dataplane or dumps, as it deactives+frees without
the required synchronize_rcu() in-between.
nft_rule_expr_deactivate() callbacks will change ->use counters
of other chains/sets, see e.g. nft_lookup .deactivate callback, these
must be serialized via transaction mutex.
Also add a few lockdep asserts to make this more explicit.
Calling synchronize_rcu() isn't ideal, but fixing this without is hard
and way more intrusive. As-is, we can get:
WARNING: .. net/netfilter/nf_tables_api.c:5515 nft_set_destroy+0x..
Workqueue: events nf_tables_trans_destroy_work
RIP: 0010:nft_set_destroy+0x3fe/0x5c0
Call Trace:
<TASK>
nf_tables_trans_destroy_work+0x6b7/0xad0
process_one_work+0x64a/0xce0
worker_thread+0x613/0x10d0
In case the synchronize_rcu becomes an issue, we can explore alternatives.
One way would be to allocate nft_trans_rule objects + one nft_trans_chain
object, deactivate the rules + the chain and then defer the freeing to the
nft destroy workqueue. We'd still need to keep the synchronize_rcu path as
a fallback to handle -ENOMEM corner cases though.
Reported-by: syzbot+b26935466701e56cfdc2@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/67478d92.050a0220.253251.0062.GAE@google.com/T/
Fixes: c03d278fdf ("netfilter: nf_tables: wait for rcu grace period on net_device removal")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The bt_copy_from_sockptr() return value is being misinterpreted by most
users: a non-zero result is mistakenly assumed to represent an error code,
but actually indicates the number of bytes that could not be copied.
Remove bt_copy_from_sockptr() and adapt callers to use
copy_safe_from_sockptr().
For sco_sock_setsockopt() (case BT_CODEC) use copy_struct_from_sockptr() to
scrub parts of uninitialized buffer.
Opportunistically, rename `len` to `optlen` in hci_sock_setsockopt_old()
and hci_sock_setsockopt().
Fixes: 51eda36d33 ("Bluetooth: SCO: Fix not validating setsockopt user input")
Fixes: a97de7bff1 ("Bluetooth: RFCOMM: Fix not validating setsockopt user input")
Fixes: 4f3951242a ("Bluetooth: L2CAP: Fix not validating setsockopt user input")
Fixes: 9e8742cdfc ("Bluetooth: ISO: Fix not validating setsockopt user input")
Fixes: b2186061d6 ("Bluetooth: hci_sock: Fix not validating setsockopt user input")
Reviewed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Johannes Berg says:
====================
A small set of fixes:
- avoid CSA warnings during link removal
(by changing link bitmap after remove)
- fix # of spatial streams initialisation
- fix queues getting stuck in some CSA cases
and resume failures
- fix interface address when switching monitor mode
- fix MBSS change flags 32-bit stack corruption
- more UBSAN __counted_by "fixes" ...
- fix link ID netlink validation
* tag 'wireless-2024-12-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: cfg80211: sme: init n_channels before channels[] access
wifi: mac80211: fix station NSS capability initialization order
wifi: mac80211: fix vif addr when switching from monitor to station
wifi: mac80211: fix a queue stall in certain cases of CSA
wifi: mac80211: wake the queues in case of failure in resume
wifi: cfg80211: clear link ID from bitmap during link delete after clean up
wifi: mac80211: init cnt before accessing elem in ieee80211_copy_mbssid_beacon
wifi: mac80211: fix mbss changed flags corruption on 32 bit systems
wifi: nl80211: fix NL80211_ATTR_MLO_LINK_ID off-by-one
====================
Link: https://patch.msgid.link/20241210130145.28618-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to make it possible to configure which bits in VXLAN header should
be considered reserved, introduce a new field vxlan_config::reserved_bits.
Have it cover the whole header, except for the VNI-present bit and the bits
for VNI itself, and have individual enabled features clear more bits off
reserved_bits.
(This is expressed as first constructing a used_bits set, and then
inverting it to get the reserved_bits. The set of used_bits will be useful
on its own for validation of user-set reserved_bits in a following patch.)
The patch also moves a comment relevant to the validation from the unparsed
validation site up to the new site. Logically this patch should add the new
comment, and a later patch that removes the unparsed bits would remove the
old comment. But keeping both legs in the same patch is better from the
history spelunking point of view.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/984dbf98d5940d3900268dbffaf70961f731d4a4.1733412063.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, page_pool_put_page_bulk() indeed takes an array of pointers
to the data, not pages, despite the name. As one side effect, when
you're freeing frags from &skb_shared_info, xdp_return_frame_bulk()
converts page pointers to virtual addresses and then
page_pool_put_page_bulk() converts them back. Moreover, data pointers
assume every frag is placed in the host memory, making this function
non-universal.
Make page_pool_put_page_bulk() handle array of netmems. Pass frag
netmems directly and use virt_to_netmem() when freeing xdpf->data,
so that the PP core will then get the compound netmem and take care
of the rest.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20241203173733.3181246-9-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the following netmem counterparts:
* virt_to_netmem() -- simple page_to_netmem(virt_to_page()) wrapper;
* netmem_is_pfmemalloc() -- page_is_pfmemalloc() for page-backed
netmems, false otherwise;
and the following "unsafe" versions:
* __netmem_to_page()
* __netmem_get_pp()
* __netmem_address()
They do the same as their non-underscored buddies, but assume the netmem
is always page-backed. When working with header &page_pools, you don't
need to check whether netmem belongs to the host memory and you can
never get NULL instead of &page. Checks for the LSB, clearing the LSB,
branches take cycles and increase object code size, sometimes
significantly. When you're sure your PP is always host, you can avoid
this by using the underscored counterparts.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20241203173733.3181246-8-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
One may need to register memory model separately from xdp_rxq_info. One
simple example may be XDP test run code, but in general, it might be
useful when memory model registering is managed by one layer and then
XDP RxQ info by a different one.
Allow such scenarios by adding a simple helper which "attaches"
already registered memory model to the desired xdp_rxq_info. As this
is mostly needed for Page Pool, add a special function to do that for
a &page_pool pointer.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241203173733.3181246-5-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the series "XSk buff on a diet" by Maciej, the greatest pow-2
which &xdp_buff_xsk can be divided got reduced from 16 to 8 on x86_64.
Also, sizeof(xdp_buff_xsk) now is 120 bytes, which, taking the previous
sentence into account, leads to that it leaves 8 bytes at the end of
cacheline, which means an array of buffs will have its elements
messed between the cachelines chaotically.
Use __aligned_largest for this struct. This alignment is usually 16
bytes, which makes it fill two full cachelines and align an array
nicely. ___cacheline_aligned may be excessive here, especially on
arches with 128-256 byte CLs, as well as 32-bit arches (76 -> 96
bytes on MIPS32R2), while not doing better than _largest.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20241203173733.3181246-2-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Paolo Abeni:
"Including fixes from can and netfilter.
Current release - regressions:
- rtnetlink: fix double call of rtnl_link_get_net_ifla()
- tcp: populate XPS related fields of timewait sockets
- ethtool: fix access to uninitialized fields in set RXNFC command
- selinux: use sk_to_full_sk() in selinux_ip_output()
Current release - new code bugs:
- net: make napi_hash_lock irq safe
- eth:
- bnxt_en: support header page pool in queue API
- ice: fix NULL pointer dereference in switchdev
Previous releases - regressions:
- core: fix icmp host relookup triggering ip_rt_bug
- ipv6:
- avoid possible NULL deref in modify_prefix_route()
- release expired exception dst cached in socket
- smc: fix LGR and link use-after-free issue
- hsr: avoid potential out-of-bound access in fill_frame_info()
- can: hi311x: fix potential use-after-free
- eth: ice: fix VLAN pruning in switchdev mode
Previous releases - always broken:
- netfilter:
- ipset: hold module reference while requesting a module
- nft_inner: incorrect percpu area handling under softirq
- can: j1939: fix skb reference counting
- eth:
- mlxsw: use correct key block on Spectrum-4
- mlx5: fix memory leak in mlx5hws_definer_calc_layout"
* tag 'net-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
net :mana :Request a V2 response version for MANA_QUERY_GF_STAT
net: avoid potential UAF in default_operstate()
vsock/test: verify socket options after setting them
vsock/test: fix parameter types in SO_VM_SOCKETS_* calls
vsock/test: fix failures due to wrong SO_RCVLOWAT parameter
net/mlx5e: Remove workaround to avoid syndrome for internal port
net/mlx5e: SD, Use correct mdev to build channel param
net/mlx5: E-Switch, Fix switching to switchdev mode in MPV
net/mlx5: E-Switch, Fix switching to switchdev mode with IB device disabled
net/mlx5: HWS: Properly set bwc queue locks lock classes
net/mlx5: HWS: Fix memory leak in mlx5hws_definer_calc_layout
bnxt_en: handle tpa_info in queue API implementation
bnxt_en: refactor bnxt_alloc_rx_rings() to call bnxt_alloc_rx_agg_bmap()
bnxt_en: refactor tpa_info alloc/free into helpers
geneve: do not assume mac header is set in geneve_xmit_skb()
mlxsw: spectrum_acl_flex_keys: Use correct key block on Spectrum-4
ethtool: Fix wrong mod state in case of verbose and no_mask bitset
ipmr: tune the ipmr_can_free_table() checks.
netfilter: nft_set_hash: skip duplicated elements pending gc run
netfilter: ipset: Hold module reference while requesting a module
...
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix esoteric undefined behaviour due to uninitialized stack access
in ip_vs_protocol_init(), from Jinghao Jia.
2) Fix iptables xt_LED slab-out-of-bounds due to incorrect sanitization
of the led string identifier, reported by syzbot. Patch from
Dmitry Antipov.
3) Remove WARN_ON_ONCE reachable from userspace to check for the maximum
cgroup level, nft_socket cgroup matching is restricted to 255 levels,
but cgroups allow for INT_MAX levels by default. Reported by syzbot.
4) Fix nft_inner incorrect use of percpu area to store tunnel parser
context with softirqs, resulting in inconsistent inner header
offsets that could lead to bogus rule mismatches, reported by syzbot.
5) Grab module reference on ipset core while requesting set type modules,
otherwise kernel crash is possible by removing ipset core module,
patch from Phil Sutter.
6) Fix possible double-free in nft_hash garbage collector due to unstable
walk interator that can provide twice the same element. Use a sequence
number to skip expired/dead elements that have been already scheduled
for removal. Based on patch from Laurent Fasnach
netfilter pull request 24-12-05
* tag 'nf-24-12-05' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_set_hash: skip duplicated elements pending gc run
netfilter: ipset: Hold module reference while requesting a module
netfilter: nft_inner: incorrect percpu area handling under softirq
netfilter: nft_socket: remove WARN_ON_ONCE on maximum cgroup level
netfilter: x_tables: fix LED ID check in led_tg_check()
ipvs: fix UB due to uninitialized stack access in ip_vs_protocol_init()
====================
Link: https://patch.msgid.link/20241205002854.162490-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add static inline dst_dev_overhead() function to include/net/dst.h. This
helper function is used by ioam6_iptunnel, rpl_iptunnel and
seg6_iptunnel to get the dev's overhead based on a cache entry
(dst_entry). If the cache is empty, the default and generic value
skb->mac_len is returned. Otherwise, LL_RESERVED_SPACE() over dst's dev
is returned.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, TX power is reported on interface/wdev level as
part of NL80211_CMD_GET_INTERFACE. With MLO, Multiple links
can be part of an interface/wdev and hence its necessary to
report the TX power of each link.
Add support to send tx power for all valid links of an MLD as
part of NL80211_CMD_GET_INTERFACE request.
As far as userspace is concerned, there is no behavioral change
for Non-ML Interfaces. For ML interfaces, userspace should fetch
TX power that is nested inside NL80211_ATTR_MLO_LINKS, similar to
how channel info(NL80211_ATTR_WIPHY_FREQ) is fetched.
Co-developed-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Link: https://patch.msgid.link/20241125083217.216095-2-quic_ramess@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Softirq can interrupt ongoing packet from process context that is
walking over the percpu area that contains inner header offsets.
Disable bh and perform three checks before restoring the percpu inner
header offsets to validate that the percpu area is valid for this
skbuff:
1) If the NFT_PKTINFO_INNER_FULL flag is set on, then this skbuff
has already been parsed before for inner header fetching to
register.
2) Validate that the percpu area refers to this skbuff using the
skbuff pointer as a cookie. If there is a cookie mismatch, then
this skbuff needs to be parsed again.
3) Finally, validate if the percpu area refers to this tunnel type.
Only after these three checks the percpu area is restored to a on-stack
copy and bh is enabled again.
After inner header fetching, the on-stack copy is stored back to the
percpu area.
Fixes: 3a07327d10 ("netfilter: nft_inner: support for inner tunnel header matching")
Reported-by: syzbot+84d0441b9860f0d63285@syzkaller.appspotmail.com
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Since adding support for opting out of virtual monitor support, a zero vif
addr was used to indicate passive vs active monitor to the driver.
This would break the vif->addr when changing the netdev mac address before
switching the interface from monitor to sta mode.
Fix the regression by adding a separate flag to indicate whether vif->addr
is valid.
Reported-by: syzbot+9ea265d998de25ac6a46@syzkaller.appspotmail.com
Fixes: 9d40f7e327 ("wifi: mac80211: add flag to opt out of virtual monitor support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20241115115850.37449-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
