Pull networking fixes from Paolo Abeni:
"Including fixes from BPF and netfilter.
Current release - regressions:
- core: fix undefined behavior in netdev name allocation
- bpf: do not allocate percpu memory at init stage
- netfilter: nf_tables: split async and sync catchall in two
functions
- mptcp: fix possible NULL pointer dereference on close
Current release - new code bugs:
- eth: ice: dpll: fix initial lock status of dpll
Previous releases - regressions:
- bpf: fix precision backtracking instruction iteration
- af_unix: fix use-after-free in unix_stream_read_actor()
- tipc: fix kernel-infoleak due to uninitialized TLV value
- eth: bonding: stop the device in bond_setup_by_slave()
- eth: mlx5:
- fix double free of encap_header
- avoid referencing skb after free-ing in drop path
- eth: hns3: fix VF reset
- eth: mvneta: fix calls to page_pool_get_stats
Previous releases - always broken:
- core: set SOCK_RCU_FREE before inserting socket into hashtable
- bpf: fix control-flow graph checking in privileged mode
- eth: ppp: limit MRU to 64K
- eth: stmmac: avoid rx queue overrun
- eth: icssg-prueth: fix error cleanup on failing initialization
- eth: hns3: fix out-of-bounds access may occur when coalesce info is
read via debugfs
- eth: cortina: handle large frames
Misc:
- selftests: gso: support CONFIG_MAX_SKB_FRAGS up to 45"
* tag 'net-6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (78 commits)
macvlan: Don't propagate promisc change to lower dev in passthru
net: sched: do not offload flows with a helper in act_ct
net/mlx5e: Check return value of snprintf writing to fw_version buffer for representors
net/mlx5e: Check return value of snprintf writing to fw_version buffer
net/mlx5e: Reduce the size of icosq_str
net/mlx5: Increase size of irq name buffer
net/mlx5e: Update doorbell for port timestamping CQ before the software counter
net/mlx5e: Track xmit submission to PTP WQ after populating metadata map
net/mlx5e: Avoid referencing skb after free-ing in drop path of mlx5e_sq_xmit_wqe
net/mlx5e: Don't modify the peer sent-to-vport rules for IPSec offload
net/mlx5e: Fix pedit endianness
net/mlx5e: fix double free of encap_header in update funcs
net/mlx5e: fix double free of encap_header
net/mlx5: Decouple PHC .adjtime and .adjphase implementations
net/mlx5: DR, Allow old devices to use multi destination FTE
net/mlx5: Free used cpus mask when an IRQ is released
Revert "net/mlx5: DR, Supporting inline WQE when possible"
bpf: Do not allocate percpu memory at init stage
net: Fix undefined behavior in netdev name allocation
dt-bindings: net: ethernet-controller: Fix formatting error
...
Macvlan device in passthru mode sets its lower device promiscuous mode
according to its MACVLAN_FLAG_NOPROMISC flag instead of synchronizing it to
its own promiscuity setting. However, macvlan_change_rx_flags() function
doesn't check the mode before propagating such changes to the lower device
which can cause net_device->promiscuity counter overflow as illustrated by
reproduction example [0] and resulting dmesg log [1]. Fix the issue by
first verifying the mode in macvlan_change_rx_flags() function before
propagating promiscuous mode change to the lower device.
[0]:
ip link add macvlan1 link enp8s0f0 type macvlan mode passthru
ip link set macvlan1 promisc on
ip l set dev macvlan1 up
ip link set macvlan1 promisc off
ip l set dev macvlan1 down
ip l set dev macvlan1 up
[1]:
[ 5156.281724] macvlan1: entered promiscuous mode
[ 5156.285467] mlx5_core 0000:08:00.0 enp8s0f0: entered promiscuous mode
[ 5156.287639] macvlan1: left promiscuous mode
[ 5156.288339] mlx5_core 0000:08:00.0 enp8s0f0: left promiscuous mode
[ 5156.290907] mlx5_core 0000:08:00.0 enp8s0f0: entered promiscuous mode
[ 5156.317197] mlx5_core 0000:08:00.0 enp8s0f0: promiscuity touches roof, set promiscuity failed. promiscuity feature of device might be broken.
Fixes: efdbd2b30c ("macvlan: Propagate promiscuity setting to lower devices.")
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231114175915.1649154-1-vladbu@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Treat the operation as an error case when the return value is equivalent to
the size of the name buffer. Failed to write null terminator to the name
buffer, making the string malformed and should not be used. Provide a
string with only the firmware version when forming the string with the
board id fails. This logic for representors is identical to normal flow
with ethtool.
Without check, will trigger -Wformat-truncation with W=1.
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c: In function 'mlx5e_rep_get_drvinfo':
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:78:31: warning: '%.16s' directive output may be truncated writing up to 16 bytes into a region of size between 13 and 22 [-Wformat-truncation=]
78 | "%d.%d.%04d (%.16s)",
| ^~~~~
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:77:9: note: 'snprintf' output between 12 and 37 bytes into a destination of size 32
77 | snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
78 | "%d.%d.%04d (%.16s)",
| ~~~~~~~~~~~~~~~~~~~~~
79 | fw_rev_maj(mdev), fw_rev_min(mdev),
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
80 | fw_rev_sub(mdev), mdev->board_id);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: cf83c8fdcd ("net/mlx5e: Add missing ethtool driver info for representors")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-16-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Treat the operation as an error case when the return value is equivalent to
the size of the name buffer. Failed to write null terminator to the name
buffer, making the string malformed and should not be used. Provide a
string with only the firmware version when forming the string with the
board id fails.
Without check, will trigger -Wformat-truncation with W=1.
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c: In function 'mlx5e_ethtool_get_drvinfo':
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:49:31: warning: '%.16s' directive output may be truncated writing up to 16 bytes into a region of size between 13 and 22 [-Wformat-truncation=]
49 | "%d.%d.%04d (%.16s)",
| ^~~~~
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:48:9: note: 'snprintf' output between 12 and 37 bytes into a destination of size 32
48 | snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
49 | "%d.%d.%04d (%.16s)",
| ~~~~~~~~~~~~~~~~~~~~~
50 | fw_rev_maj(mdev), fw_rev_min(mdev), fw_rev_sub(mdev),
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
51 | mdev->board_id);
| ~~~~~~~~~~~~~~~
Fixes: 84e11edb71 ("net/mlx5e: Show board id in ethtool driver information")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
icosq_str size is unnecessarily too long, and it causes a build warning
-Wformat-truncation with W=1. Looking closely, It doesn't need to be 255B,
hence this patch reduces the size to 32B which should be more than enough
to host the string: "ICOSQ: 0x%x, ".
While here, add a missing space in the formatted string.
This fixes the following build warning:
$ KCFLAGS='-Wall -Werror'
$ make O=/tmp/kbuild/linux W=1 -s -j12 drivers/net/ethernet/mellanox/mlx5/core/
drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c: In function 'mlx5e_reporter_rx_timeout':
drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c:718:56:
error: ', CQ: 0x' directive output may be truncated writing 8 bytes into a region of size between 0 and 255 [-Werror=format-truncation=]
718 | "RX timeout on channel: %d, %sRQ: 0x%x, CQ: 0x%x",
| ^~~~~~~~
drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c:717:9: note: 'snprintf' output between 43 and 322 bytes into a destination of size 288
717 | snprintf(err_str, sizeof(err_str),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
718 | "RX timeout on channel: %d, %sRQ: 0x%x, CQ: 0x%x",
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
719 | rq->ix, icosq_str, rq->rqn, rq->cq.mcq.cqn);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 521f31af00 ("net/mlx5e: Allow RQ outside of channel context")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-14-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Without increased buffer size, will trigger -Wformat-truncation with W=1
for the snprintf operation writing to the buffer.
drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c: In function 'mlx5_irq_alloc':
drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c:296:7: error: '@pci:' directive output may be truncated writing 5 bytes into a region of size between 1 and 32 [-Werror=format-truncation=]
296 | "%s@pci:%s", name, pci_name(dev->pdev));
| ^~~~~
drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c:295:2: note: 'snprintf' output 6 or more bytes (assuming 37) into a destination of size 32
295 | snprintf(irq->name, MLX5_MAX_IRQ_NAME,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
296 | "%s@pci:%s", name, pci_name(dev->pdev));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: ada9f5d007 ("IB/mlx5: Fix eq names to display nicely in /proc/interrupts")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-13-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previously, mlx5e_ptp_poll_ts_cq would update the device doorbell with the
incremented consumer index after the relevant software counters in the
kernel were updated. In the mlx5e_sq_xmit_wqe context, this would lead to
either overrunning the device CQ or exceeding the expected software buffer
size in the device CQ if the device CQ size was greater than the software
buffer size. Update the relevant software counter only after updating the
device CQ consumer index in the port timestamping napi_poll context.
Log:
mlx5_core 0000:08:00.0: cq_err_event_notifier:517:(pid 0): CQ error on CQN 0x487, syndrome 0x1
mlx5_core 0000:08:00.0 eth2: mlx5e_cq_error_event: cqn=0x000487 event=0x04
Fixes: 1880bc4e4a ("net/mlx5e: Add TX port timestamp support")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-12-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Referenced commit addressed endianness issue in mlx5 pedit implementation
in ad hoc manner instead of systematically treating integer values
according to their types which left pedit fields of sizes not equal to 4
and where the bytes being modified are not least significant ones broken on
big endian machines since wrong bits will be consumed during parsing which
leads to following example error when applying pedit to source and
destination MAC addresses:
[Wed Oct 18 12:52:42 2023] mlx5_core 0001:00:00.1 p1v3_r: attempt to offload an unsupported field (cmd 0)
[Wed Oct 18 12:52:42 2023] mask: 00000000330c5b68: 00 00 00 00 ff ff 00 00 00 00 ff ff 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 0000000017d22fd9: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 000000008186d717: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 0000000029eb6149: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 000000007ed103e4: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 00000000db8101a6: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 00000000ec3c08a9: 00 00 00 00 00 00 00 00 00 00 00 00 ............
Treat masks and values of pedit and filter match as network byte order,
refactor pointers to them to void pointers instead of confusing u32
pointers and only cast to pointer-to-integer when reading a value from
them. Treat pedit mlx5_fields->field_mask as host byte order according to
its type u32, change the constants in fields array accordingly.
Fixes: 82198d8bcd ("net/mlx5e: Fix endianness when calculating pedit mask first bit")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-8-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Follow up to the previous patch to fix the same issue for
mlx5e_tc_tun_update_header_ipv4{6} when mlx5_packet_reformat_alloc()
fails.
When mlx5_packet_reformat_alloc() fails, the encap_header allocated in
mlx5e_tc_tun_update_header_ipv4{6} will be released within it. However,
e->encap_header is already set to the previously freed encap_header
before mlx5_packet_reformat_alloc(). As a result, the later
mlx5e_encap_put() will free e->encap_header again, causing a double free
issue.
mlx5e_encap_put()
--> mlx5e_encap_dealloc()
--> kfree(e->encap_header)
This patch fix it by not setting e->encap_header until
mlx5_packet_reformat_alloc() success.
Fixes: a54e20b4fc ("net/mlx5e: Add basic TC tunnel set action for SRIOV offloads")
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-7-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When mlx5_packet_reformat_alloc() fails, the encap_header allocated in
mlx5e_tc_tun_create_header_ipv4{6} will be released within it. However,
e->encap_header is already set to the previously freed encap_header
before mlx5_packet_reformat_alloc(). As a result, the later
mlx5e_encap_put() will free e->encap_header again, causing a double free
issue.
mlx5e_encap_put()
--> mlx5e_encap_dealloc()
--> kfree(e->encap_header)
This happens when cmd: MLX5_CMD_OP_ALLOC_PACKET_REFORMAT_CONTEXT fail.
This patch fix it by not setting e->encap_header until
mlx5_packet_reformat_alloc() success.
Fixes: d589e785ba ("net/mlx5e: Allow concurrent creation of encap entries")
Reported-by: Cruz Zhao <cruzzhao@linux.alibaba.com>
Reported-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When running a phase adjustment operation, the free running clock should
not be modified at all. The phase control keyword is intended to trigger an
internal servo on the device that will converge to the provided delta. A
free running counter cannot implement phase adjustment.
Fixes: 8e11a68e2e ("net/mlx5: Add adjphase function to support hardware-only offset control")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-5-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Each EQ table maintains a cpumask of the already used CPUs that are mapped
to IRQs to ensure that each IRQ gets mapped to a unique CPU.
However, on IRQ release, the said cpumask is not updated by clearing the
CPU from the mask to allow future IRQ request, causing the following
error when a SF is reloaded after it has utilized all CPUs for its IRQs:
mlx5_irq_affinity_request:135:(pid 306010): Didn't find a matching IRQ.
err = -28
Thus, when releasing an IRQ, clear its mapped CPU from the used CPUs
mask, to prevent the case described above.
While at it, move the used cpumask update to the EQ layer as it is more
fitting and preserves symmetricity of the IRQ request/release API.
Fixes: a1772de78d ("net/mlx5: Refactor completion IRQ request/release API")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-3-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Netpoll will explicilty pass the polling call with a budget of 0 to
indicate it's clearing the Tx path only. For the gve_rx_poll and
gve_xdp_poll, they were mistakenly taking the 0 budget as the indication
to do all the work. Add check to avoid the rx path and xdp path being
called when budget is 0. And also avoid napi_complete_done being called
when budget is 0 for netpoll.
Fixes: f5cedc84a3 ("gve: Add transmit and receive support")
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Link: https://lore.kernel.org/r/20231114004144.2022268-1-ziweixiao@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-11-13 (ice)
This series contains updates to ice driver only.
Arkadiusz ensures the device is initialized with valid lock status
value. He also removes range checking of dpll priority to allow firmware
to process the request; supported values are firmware dependent.
Finally, he removes setting of can change capability for pins that
cannot be changed.
Dan restores ability to load a package which doesn't contain a signature
segment.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: fix DDP package download for packages without signature segment
ice: dpll: fix output pin capabilities
ice: dpll: fix check for dpll input priority range
ice: dpll: fix initial lock status of dpll
====================
Link: https://lore.kernel.org/r/20231113230551.548489-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The while loop condition verifies 'count < limit'. Neither value change
before the 'count >= limit' check. As is this check is dead code. But
code inspection reveals a code path that modifies 'count' and then goto
'drain_data' and back to 'read_again'. So there is a need to verify
count value sanity after 'read_again'.
Move 'read_again' up to fix the count limit check.
Fixes: ec222003bd ("net: stmmac: Prepare to add Split Header support")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/d9486296c3b6b12ab3a0515fcd47d56447a07bfc.1699897370.git.baruch@tkos.co.il
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For devices that support DASH, even DASH is disabled, there may still
exist a default firmware that will influence device behavior.
So driver needs to handle DASH for devices that support DASH, no
matter the DASH status is.
This patch also prepares for "fix network lost after resume on DASH
systems".
Fixes: ee7a1beb97 ("r8169:call "rtl8168_driver_start" "rtl8168_driver_stop" only when hardware dash function is enabled")
Cc: stable@vger.kernel.org
Signed-off-by: ChunHao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20231109173400.4573-2-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RX max frame size is over 10000 for the Gemini ethernet,
but the TX max frame size is actually just 2047 (0x7ff after
checking the datasheet). Reflect this in what we offer to Linux,
cap the MTU at the TX max frame minus ethernet headers.
We delete the code disabling the hardware checksum for large
MTUs as netdev->mtu can no longer be larger than
netdev->max_mtu meaning the if()-clause in gmac_fix_features()
is never true.
Fixes: 4d5ae32f5e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20231109-gemini-largeframe-fix-v4-3-6e611528db08@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Gemini ethernet controller provides hardware checksumming
for frames up to 1514 bytes including ethernet headers but not
FCS.
If we start sending bigger frames (after first bumping up the MTU
on both interfaces sending and receiving the frames), truncated
packets start to appear on the target such as in this tcpdump
resulting from ping -s 1474:
23:34:17.241983 14:d6:4d:a8:3c:4f (oui Unknown) > bc:ae:c5:6b:a8:3d (oui Unknown),
ethertype IPv4 (0x0800), length 1514: truncated-ip - 2 bytes missing!
(tos 0x0, ttl 64, id 32653, offset 0, flags [DF], proto ICMP (1), length 1502)
OpenWrt.lan > Fecusia: ICMP echo request, id 1672, seq 50, length 1482
If we bypass the hardware checksumming and provide a software
fallback, everything starts working fine up to the max TX MTU
of 2047 bytes, for example ping -s2000 192.168.1.2:
00:44:29.587598 bc:ae:c5:6b:a8:3d (oui Unknown) > 14:d6:4d:a8:3c:4f (oui Unknown),
ethertype IPv4 (0x0800), length 2042:
(tos 0x0, ttl 64, id 51828, offset 0, flags [none], proto ICMP (1), length 2028)
Fecusia > OpenWrt.lan: ICMP echo reply, id 1683, seq 4, length 2008
The bit enabling to bypass hardware checksum (or any of the
"TSS" bits) are undocumented in the hardware reference manual.
The entire hardware checksum unit appears undocumented. The
conclusion that we need to use the "bypass" bit was found by
trial-and-error.
Since no hardware checksum will happen, we slot in a software
checksum fallback.
Check for the condition where we need to compute checksum on the
skb with either hardware or software using == CHECKSUM_PARTIAL instead
of != CHECKSUM_NONE which is an incomplete check according to
<linux/skbuff.h>.
On the D-Link DIR-685 router this fixes a bug on the conduit
interface to the RTL8366RB DSA switch: as the switch needs to add
space for its tag it increases the MTU on the conduit interface
to 1504 and that means that when the router sends packages
of 1500 bytes these get an extra 4 bytes of DSA tag and the
transfer fails because of the erroneous hardware checksumming,
affecting such basic functionality as the LuCI web interface.
Fixes: 4d5ae32f5e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20231109-gemini-largeframe-fix-v4-2-6e611528db08@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The dpll output pins which are used to feed clock signal of PHY and MAC
circuits cannot be disconnected, those integrated circuits require clock
signal for operation.
By stopping assignment of DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE pin
capability, prevent the user from invoking the state set callback on
those pins, setting the state on those pins already returns error, as
firmware doesn't allow the change of their state.
Fixes: d7999f5ea6 ("ice: implement dpll interface to control cgu")
Fixes: 8a3a565ff2 ("ice: add admin commands to access cgu configuration")
Reviewed-by: Andrii Staikov <andrii.staikov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Supported priority value for input pins may differ with regard of NIC
firmware version. E810T NICs with 3.20/4.00 FW versions would accept
priority range 0-31, where firmware 4.10+ would support the range 0-9
and extra value of 255.
Remove the in-range check as the driver has no information on supported
values from the running firmware, let firmware decide if given value is
correct and return extack error if the value is not supported.
Fixes: d7999f5ea6 ("ice: implement dpll interface to control cgu")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When dpll device is registered and dpll subsystem performs notify of a
new device, the lock state value provided to dpll subsystem equals 0
which is invalid value for the `enum dpll_lock_status`.
Provide correct value by obtaining it from firmware before registering
the dpll device.
Fixes: d7999f5ea6 ("ice: implement dpll interface to control cgu")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ppp_sync_ioctl allows setting device MRU, but does not sanity check
this input.
Limit to a sane upper bound of 64KB.
No implementation I could find generates larger than 64KB frames.
RFC 2823 mentions an upper bound of PPP over SDL of 64KB based on the
16-bit length field. Other protocols will be smaller, such as PPPoE
(9KB jumbo frame) and PPPoA (18190 maximum CPCS-SDU size, RFC 2364).
PPTP and L2TP encapsulate in IP.
Syzbot managed to trigger alloc warning in __alloc_pages:
if (WARN_ON_ONCE_GFP(order > MAX_ORDER, gfp))
WARNING: CPU: 1 PID: 37 at mm/page_alloc.c:4544 __alloc_pages+0x3ab/0x4a0 mm/page_alloc.c:4544
__alloc_skb+0x12b/0x330 net/core/skbuff.c:651
__netdev_alloc_skb+0x72/0x3f0 net/core/skbuff.c:715
netdev_alloc_skb include/linux/skbuff.h:3225 [inline]
dev_alloc_skb include/linux/skbuff.h:3238 [inline]
ppp_sync_input drivers/net/ppp/ppp_synctty.c:669 [inline]
ppp_sync_receive+0xff/0x680 drivers/net/ppp/ppp_synctty.c:334
tty_ldisc_receive_buf+0x14c/0x180 drivers/tty/tty_buffer.c:390
tty_port_default_receive_buf+0x70/0xb0 drivers/tty/tty_port.c:37
receive_buf drivers/tty/tty_buffer.c:444 [inline]
flush_to_ldisc+0x261/0x780 drivers/tty/tty_buffer.c:494
process_one_work+0x884/0x15c0 kernel/workqueue.c:2630
With call
ioctl$PPPIOCSMRU1(r1, 0x40047452, &(0x7f0000000100)=0x5e6417a8)
Similar code exists in other drivers that implement ppp_channel_ops
ioctl PPPIOCSMRU. Those might also be in scope. Notably excluded from
this are pppol2tp_ioctl and pppoe_ioctl.
This code goes back to the start of git history.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: syzbot+6177e1f90d92583bcc58@syzkaller.appspotmail.com
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If PF is down, firmware will returns 10 Mbit/s rate and half-duplex mode
when PF queries the port information from firmware.
After imp reset command is executed, PF status changes to down,
and PF will query link status and updates port information
from firmware in a periodic scheduled task.
However, there is a low probability that port information is updated
when PF is down, and then PF link status changes to up.
In this case, PF synchronizes incorrect rate and duplex mode to VF.
This patch fixes it by updating port information before
PF synchronizes the rate and duplex to the VF
when PF changes to up.
Fixes: 18b6e31f8b ("net: hns3: PF add support for pushing link status to VFs")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the reset process in hns3 and firmware watchdog init process is
asynchronous. We think firmware watchdog initialization is completed
before VF clear the interrupt source. However, firmware initialization
may not complete early. So VF will receive multiple reset interrupts
and fail to reset.
So we add delay before VF interrupt source and 5 ms delay
is enough to avoid second reset interrupt.
Fixes: 427900d27d ("net: hns3: fix the timing issue of VF clearing interrupt sources")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a VF is calling hns3_init_mac_addr(), get_mac_addr() may
return fail, then the value of mac_addr_temp is not initialized.
Fixes: 76ad4f0ee7 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The hns3 driver define an array of string to show the coalesce
info, but if the kernel adds a new mode or a new state,
out-of-bounds access may occur when coalesce info is read via
debugfs, this patch fix the problem.
Fixes: c99fead7cb ("net: hns3: add debugfs support for interrupt coalesce")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the FEC capability bit is default set for device version V2.
It's incorrect for the copper port. Eventhough it doesn't make the nic
work abnormal, but the capability information display in debugfs may
confuse user. So clear it when driver get the port type inforamtion.
Fixes: 433ccce835 ("net: hns3: use FEC capability queried from firmware")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In hclgevf_mbx_handler() and hclgevf_get_mbx_resp() functions,
there is a typical store-store and load-load scenario between
received_resp and additional_info. This patch adds barrier
to fix the problem.
Fixes: 4671042f1e ("net: hns3: add match_id to check mailbox response from PF to VF")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The hclge_sync_vlan_filter is called in periodic task,
trying to remove VLAN from vlan_del_fail_bmap. It can
be concurrence with VLAN adding operation from user.
So once user failed to delete a VLAN id, and add it
again soon, it may be removed by the periodic task,
which may cause the software configuration being
inconsistent with hardware. So add mutex handling
to avoid this.
user hns3 driver
periodic task
│
add vlan 10 ───── hns3_vlan_rx_add_vid │
│ (suppose success) │
│ │
del vlan 10 ───── hns3_vlan_rx_kill_vid │
│ (suppose fail,add to │
│ vlan_del_fail_bmap) │
│ │
add vlan 10 ───── hns3_vlan_rx_add_vid │
(suppose success) │
foreach vlan_del_fail_bmp
del vlan 10
Fixes: fe4144d47e ("net: hns3: sync VLAN filter entries when kill VLAN ID failed")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Analogously to prueth_remove, just also taking care for NULL'ing the
iep pointers.
Fixes: 186734c158 ("net: ti: icssg-prueth: add packet timestamping and ptp support")
Fixes: 443a2367ba ("net: ti: icssg-prueth: am65x SR2.0 add 10M full duplex support")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
KMSAN reported the following uninit-value access issue:
=====================================================
BUG: KMSAN: uninit-value in ppp_sync_input drivers/net/ppp/ppp_synctty.c:690 [inline]
BUG: KMSAN: uninit-value in ppp_sync_receive+0xdc9/0xe70 drivers/net/ppp/ppp_synctty.c:334
ppp_sync_input drivers/net/ppp/ppp_synctty.c:690 [inline]
ppp_sync_receive+0xdc9/0xe70 drivers/net/ppp/ppp_synctty.c:334
tiocsti+0x328/0x450 drivers/tty/tty_io.c:2295
tty_ioctl+0x808/0x1920 drivers/tty/tty_io.c:2694
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:871 [inline]
__se_sys_ioctl+0x211/0x400 fs/ioctl.c:857
__x64_sys_ioctl+0x97/0xe0 fs/ioctl.c:857
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Uninit was created at:
__alloc_pages+0x75d/0xe80 mm/page_alloc.c:4591
__alloc_pages_node include/linux/gfp.h:238 [inline]
alloc_pages_node include/linux/gfp.h:261 [inline]
__page_frag_cache_refill+0x9a/0x2c0 mm/page_alloc.c:4691
page_frag_alloc_align+0x91/0x5d0 mm/page_alloc.c:4722
page_frag_alloc include/linux/gfp.h:322 [inline]
__netdev_alloc_skb+0x215/0x6d0 net/core/skbuff.c:728
netdev_alloc_skb include/linux/skbuff.h:3225 [inline]
dev_alloc_skb include/linux/skbuff.h:3238 [inline]
ppp_sync_input drivers/net/ppp/ppp_synctty.c:669 [inline]
ppp_sync_receive+0x237/0xe70 drivers/net/ppp/ppp_synctty.c:334
tiocsti+0x328/0x450 drivers/tty/tty_io.c:2295
tty_ioctl+0x808/0x1920 drivers/tty/tty_io.c:2694
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:871 [inline]
__se_sys_ioctl+0x211/0x400 fs/ioctl.c:857
__x64_sys_ioctl+0x97/0xe0 fs/ioctl.c:857
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
CPU: 0 PID: 12950 Comm: syz-executor.1 Not tainted 6.6.0-14500-g1c41041124bd #10
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014
=====================================================
ppp_sync_input() checks the first 2 bytes of the data are PPP_ALLSTATIONS
and PPP_UI. However, if the data length is 1 and the first byte is
PPP_ALLSTATIONS, an access to an uninitialized value occurs when checking
PPP_UI. This patch resolves this issue by checking the data length.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter and bpf.
Current release - regressions:
- sched: fix SKB_NOT_DROPPED_YET splat under debug config
Current release - new code bugs:
- tcp:
- fix usec timestamps with TCP fastopen
- fix possible out-of-bounds reads in tcp_hash_fail()
- fix SYN option room calculation for TCP-AO
- tcp_sigpool: fix some off by one bugs
- bpf: fix compilation error without CGROUPS
- ptp:
- ptp_read() should not release queue
- fix tsevqs corruption
Previous releases - regressions:
- llc: verify mac len before reading mac header
Previous releases - always broken:
- bpf:
- fix check_stack_write_fixed_off() to correctly spill imm
- fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END
- check map->usercnt after timer->timer is assigned
- dsa: lan9303: consequently nested-lock physical MDIO
- dccp/tcp: call security_inet_conn_request() after setting IP addr
- tg3: fix the TX ring stall due to incorrect full ring handling
- phylink: initialize carrier state at creation
- ice: fix direction of VF rules in switchdev mode
Misc:
- fill in a bunch of missing MODULE_DESCRIPTION()s, more to come"
* tag 'net-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
net: ti: icss-iep: fix setting counter value
ptp: fix corrupted list in ptp_open
ptp: ptp_read should not release queue
net_sched: sch_fq: better validate TCA_FQ_WEIGHTS and TCA_FQ_PRIOMAP
net: kcm: fill in MODULE_DESCRIPTION()
net/sched: act_ct: Always fill offloading tuple iifidx
netfilter: nat: fix ipv6 nat redirect with mapped and scoped addresses
netfilter: xt_recent: fix (increase) ipv6 literal buffer length
ipvs: add missing module descriptions
netfilter: nf_tables: remove catchall element in GC sync path
netfilter: add missing module descriptions
drivers/net/ppp: use standard array-copy-function
net: enetc: shorten enetc_setup_xdp_prog() error message to fit NETLINK_MAX_FMTMSG_LEN
virtio/vsock: Fix uninit-value in virtio_transport_recv_pkt()
r8169: respect userspace disabling IFF_MULTICAST
selftests/bpf: get trusted cgrp from bpf_iter__cgroup directly
bpf: Let verifier consider {task,cgroup} is trusted in bpf_iter_reg
net: phylink: initialize carrier state at creation
test/vsock: add dobule bind connect test
test/vsock: refactor vsock_accept
...
