The BITS_IN_DWORD() macro, which represents the number of bits in the
registers accessed by the firmware loader, is currently defined as 32.
For consistency and readability, replace this macro with the existing
BITS_PER_TYPE() macro, which serves the same purpose.
This does not introduce any functional change.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The structures adf_hw_device_class_* are static.
Remove initialization to zero of the field instance as it is zero
by C convention.
This does not introduce any functional change.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
During a warm reset via kexec, the system bypasses the driver removal
sequence, meaning that the remove() callback is not invoked.
If a QAT device is not shutdown properly, the device driver will fail to
load in a newly rebooted kernel.
This might result in output like the following after the kexec reboot:
QAT: AE0 is inactive!!
QAT: failed to get device out of reset
c3xxx 0000:3f:00.0: qat_hal_clr_reset error
c3xxx 0000:3f:00.0: Failed to init the AEs
c3xxx 0000:3f:00.0: Failed to initialise Acceleration Engine
c3xxx 0000:3f:00.0: Resetting device qat_dev0
c3xxx 0000:3f:00.0: probe with driver c3xxx failed with error -14
Implement the shutdown() handler that hooks into the reboot notifier
list. This brings down the QAT device and ensures it is shut down
properly.
Cc: <stable@vger.kernel.org>
Fixes: 890c55f4dc ("crypto: qat - add support for c3xxx accel type")
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the definition of the adf_driver structure and remove the redundant
prototypes for the functions adf_probe() and adf_remove() in the
qat_c3xxx driver.
Also move the pci_device_id table close to where it is used and drop the
inner comma as it is not required.
This does not introduce any functional change.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
During a warm reset via kexec, the system bypasses the driver removal
sequence, meaning that the remove() callback is not invoked.
If a QAT device is not shutdown properly, the device driver will fail to
load in a newly rebooted kernel.
This might result in output like the following after the kexec reboot:
QAT: AE0 is inactive!!
QAT: failed to get device out of reset
c6xx 0000:3f:00.0: qat_hal_clr_reset error
c6xx 0000:3f:00.0: Failed to init the AEs
c6xx 0000:3f:00.0: Failed to initialise Acceleration Engine
c6xx 0000:3f:00.0: Resetting device qat_dev0
c6xx 0000:3f:00.0: probe with driver c6xx failed with error -14
Implement the shutdown() handler that hooks into the reboot notifier
list. This brings down the QAT device and ensures it is shut down
properly.
Cc: <stable@vger.kernel.org>
Fixes: a6dabee6c8 ("crypto: qat - add support for c62x accel type")
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the definition of the adf_driver structure and remove the redundant
prototypes for the functions adf_probe() and adf_remove() in the
qat_c62x driver.
Also move the pci_device_id table close to where it is used and drop the
inner comma as it is not required.
This does not introduce any functional change.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
During a warm reset via kexec, the system bypasses the driver removal
sequence, meaning that the remove() callback is not invoked.
If a QAT device is not shutdown properly, the device driver will fail to
load in a newly rebooted kernel.
This might result in output like the following after the kexec reboot:
QAT: AE0 is inactive!!
QAT: failed to get device out of reset
dh895xcc 0000:3f:00.0: qat_hal_clr_reset error
dh895xcc 0000:3f:00.0: Failed to init the AEs
dh895xcc 0000:3f:00.0: Failed to initialise Acceleration Engine
dh895xcc 0000:3f:00.0: Resetting device qat_dev0
dh895xcc 0000:3f:00.0: probe with driver dh895xcc failed with error -14
Implement the shutdown() handler that hooks into the reboot notifier
list. This brings down the QAT device and ensures it is shut down
properly.
Cc: <stable@vger.kernel.org>
Fixes: 7afa232e76 ("crypto: qat - Intel(R) QAT DH895xcc accelerator")
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the definition of the adf_driver structure and remove the redundant
prototypes for the functions adf_probe() and adf_remove() in the
qat_dh895xxcc driver.
Also move the pci_device_id table close to where it is used and drop the
inner comma as it is not required.
This does not introduce any functional change.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
During a warm reset via kexec, the system bypasses the driver removal
sequence, meaning that the remove() callback is not invoked.
If a QAT device is not shutdown properly, the device driver will fail to
load in a newly rebooted kernel.
This might result in output like the following after the kexec reboot:
420xx 0000:01:00.0: Failed to power up the device
420xx 0000:01:00.0: Failed to initialize device
420xx 0000:01:00.0: Resetting device qat_dev0
420xx 0000:01:00.0: probe with driver 420xx failed with error -14
Implement the shutdown() handler that hooks into the reboot notifier
list. This brings down the QAT device and ensures it is shut down
properly.
Cc: <stable@vger.kernel.org>
Fixes: fcf60f4bcf ("crypto: qat - add support for 420xx devices")
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
During a warm reset via kexec, the system bypasses the driver removal
sequence, meaning that the remove() callback is not invoked.
If a QAT device is not shutdown properly, the device driver will fail to
load in a newly rebooted kernel.
This might result in output like the following after the kexec reboot:
4xxx 0000:01:00.0: Failed to power up the device
4xxx 0000:01:00.0: Failed to initialize device
4xxx 0000:01:00.0: Resetting device qat_dev0
4xxx 0000:01:00.0: probe with driver 4xxx failed with error -14
Implement the shutdown() handler that hooks into the reboot notifier
list. This brings down the QAT device and ensures it is shut down
properly.
Cc: <stable@vger.kernel.org>
Fixes: 8c8268166e ("crypto: qat - add qat_4xxx driver")
Link: https://lore.kernel.org/all/Z-DGQrhRj9niR9iZ@gondor.apana.org.au/
Reported-by: Randy Wright <rwright@hpe.com>
Closes: https://issues.redhat.com/browse/RHEL-84366
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rather than setting up a request by hand, use the correct API helpers
to setup the new request. This is because the API helpers will setup
chaining.
Also change the fallback allocation to explicitly request for a
sync algorithm as this driver will crash if given an async one.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, the SNP panic notifier is registered on module initialization
regardless of whether SNP is being enabled or initialized.
Instead, register the SNP panic notifier only when SNP is actually
initialized and unregister the notifier when SNP is shutdown.
Reviewed-by: Dionna Glaze <dionnaglaze@google.com>
Reviewed-by: Alexey Kardashevskiy <aik@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Implicit SNP initialization as part of some SNP ioctls modify TMR size
to be SNP compliant which followed by SNP shutdown will leave the
TMR size modified and then subsequently cause SEV only initialization
to fail, hence, reset TMR size to default at SNP Shutdown.
Acked-by: Dionna Glaze <dionnaglaze@google.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Modify the behavior of implicit SEV initialization in some of the
SEV ioctls to do both SEV initialization and shutdown and add
implicit SNP initialization and shutdown to some of the SNP ioctls
so that the change of SEV/SNP platform initialization not being
done during PSP driver probe time does not break userspace tools
such as sevtool, etc.
Prior to this patch, SEV has always been initialized before these
ioctls as SEV initialization is done as part of PSP module probe,
but now with SEV initialization being moved to KVM module load instead
of PSP driver probe, the implied SEV INIT actually makes sense and gets
used and additionally to maintain SEV platform state consistency
before and after the ioctl SEV shutdown needs to be done after the
firmware call.
It is important to do SEV Shutdown here with the SEV/SNP initialization
moving to KVM, an implicit SEV INIT here as part of the SEV ioctls not
followed with SEV Shutdown will cause SEV to remain in INIT state and
then a future SNP INIT in KVM module load will fail.
Also ensure that for these SEV ioctls both implicit SNP and SEV INIT is
done followed by both SEV and SNP shutdown as RMP table must be
initialized before calling SEV INIT if SNP host support is enabled.
Similarly, prior to this patch, SNP has always been initialized before
these ioctls as SNP initialization is done as part of PSP module probe,
therefore, to keep a consistent behavior, SNP init needs to be done
here implicitly as part of these ioctls followed with SNP shutdown
before returning from the ioctl to maintain the consistent platform
state before and after the ioctl.
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move dev_info and dev_err messages related to SEV/SNP initialization
and shutdown into __sev_platform_init_locked(), __sev_snp_init_locked()
and __sev_platform_shutdown_locked(), __sev_snp_shutdown_locked() so
that they don't need to be issued from callers.
This allows both _sev_platform_init_locked() and various SEV/SNP ioctls
to call __sev_platform_init_locked(), __sev_snp_init_locked() and
__sev_platform_shutdown_locked(), __sev_snp_shutdown_locked() for
implicit SEV/SNP initialization and shutdown without additionally
printing any errors/success messages.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If SNP host support (SYSCFG.SNPEn) is set, then the RMP table must
be initialized before calling SEV INIT.
In other words, if SNP_INIT(_EX) is not issued or fails then
SEV INIT will fail if SNP host support (SYSCFG.SNPEn) is enabled.
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The req->base.data field is for the user and must not be touched by
the driver, unless you save it first.
The iaa driver doesn't seem to be using the req->base.data value
so just remove the assignment.
Fixes: 09646c98d0 ("crypto: iaa - Add irq support for the crypto async interface")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rather than passing around a CRC between the functions, embed it
into the acomp_request context.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove cavium/zip as it is obsolete and stands in the way of
acomp API work. If this is ever resurrected, please turn it
into an acomp driver.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The compiler gcc 12 warns about the IV buffer being uninitialized
in crypto4xx_crypt. Silence the warning by using the new gcc 12
access attribute to mark crypto4xx_build_pd.
Also fix the IV buffer length as it has been quadrupled (64 instead
of 16).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Modifying the crypto_request turns out to be not the right way to handle
the stale value issue with the IV. Though the IV is not used for AES ECB,
it eventually get used in algorithms like LRW in the next step after
AES ECB encryption/decryption. Setting req->iv to NULL breaks the
implementation of such algorithms. Hence modify only the local reqctx
to check for IV.
Fixes: bde5582208 ("crypto: tegra - Set IV to NULL explicitly for AES ECB")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull crypto fix from Herbert Xu:
"This fixes a race condition in the newly added eip93 driver"
* tag 'v6.15-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: inside-secure/eip93 - acquire lock on eip93_put_descriptor hash
In the EIP93 HASH functions, the eip93_put_descriptor is called without
acquiring lock. This is problematic when multiple thread execute hash
operations.
Correctly acquire ring write lock on calling eip93_put_descriptor to
prevent concurrent access and mess with the ring pointers.
Fixes: 9739f5f93b ("crypto: eip93 - Add Inside Secure SafeXcel EIP-93 crypto engine support")
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull CRC updates from Eric Biggers:
"Another set of improvements to the kernel's CRC (cyclic redundancy
check) code:
- Rework the CRC64 library functions to be directly optimized, like
what I did last cycle for the CRC32 and CRC-T10DIF library
functions
- Rewrite the x86 PCLMULQDQ-optimized CRC code, and add VPCLMULQDQ
support and acceleration for crc64_be and crc64_nvme
- Rewrite the riscv Zbc-optimized CRC code, and add acceleration for
crc_t10dif, crc64_be, and crc64_nvme
- Remove crc_t10dif and crc64_rocksoft from the crypto API, since
they are no longer needed there
- Rename crc64_rocksoft to crc64_nvme, as the old name was incorrect
- Add kunit test cases for crc64_nvme and crc7
- Eliminate redundant functions for calculating the Castagnoli CRC32,
settling on just crc32c()
- Remove unnecessary prompts from some of the CRC kconfig options
- Further optimize the x86 crc32c code"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (36 commits)
x86/crc: drop the avx10_256 functions and rename avx10_512 to avx512
lib/crc: remove unnecessary prompt for CONFIG_CRC64
lib/crc: remove unnecessary prompt for CONFIG_LIBCRC32C
lib/crc: remove unnecessary prompt for CONFIG_CRC8
lib/crc: remove unnecessary prompt for CONFIG_CRC7
lib/crc: remove unnecessary prompt for CONFIG_CRC4
lib/crc7: unexport crc7_be_syndrome_table
lib/crc_kunit.c: update comment in crc_benchmark()
lib/crc_kunit.c: add test and benchmark for crc7_be()
x86/crc32: optimize tail handling for crc32c short inputs
riscv/crc64: add Zbc optimized CRC64 functions
riscv/crc-t10dif: add Zbc optimized CRC-T10DIF function
riscv/crc32: reimplement the CRC32 functions using new template
riscv/crc: add "template" for Zbc optimized CRC functions
x86/crc: add ANNOTATE_NOENDBR to suppress objtool warnings
x86/crc32: improve crc32c_arch() code generation with clang
x86/crc64: implement crc64_be and crc64_nvme using new template
x86/crc-t10dif: implement crc_t10dif using new template
x86/crc32: implement crc32_le using new template
x86/crc: add "template" for [V]PCLMULQDQ based CRC functions
...
The 'comp' API is obsolete and will be removed, so remove this comp
implementation.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The only remaining user of 842 compression has been migrated to the
acomp compression API, and so the NX hardware driver has to follow suit,
given that no users of the obsolete 'comp' API remain, and it is going
to be removed.
So migrate the NX driver code to scomp. These will be wrapped and
exposed as acomp implementation via the crypto subsystem's
acomp-to-scomp adaptation layer.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The compiler correctly warns that hv_nxc may be used uninitialised
as that will occur when NX-GZIP is unavailable.
Fix it by rearranging the code and delay setting caps_feat until
the final query succeeds.
Fixes: b4ba22114c ("crypto/nx: Get NX capabilities for GZIP coprocessor type")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use desc instead of a stack buffer in the final function. This
fixes a compiler warning about buf being uninitialised.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Any driver that needs these library functions should already be selecting
the corresponding Kconfig symbols, so there is no real point in making
these visible.
The original patch that made these user selectable described problems
with drivers failing to select the code they use, but for consistency
it's better to always use 'select' on a symbol than to mix it with
'depends on'.
Fixes: e56e189855 ("lib/crypto: add prompts back to crypto libraries")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The firmware already handles parity errors reported by the accelerators
by clearing them through the corresponding SSMSOFTERRORPARITY register.
To ensure consistent behavior and prevent race conditions between the
driver and firmware, remove the logic that checks the SSMSOFTERRORPARITY
registers.
Additionally, change the return type of the function
adf_handle_rf_parr_err() to void, as it consistently returns false.
Parity errors are recoverable and do not necessitate a device reset.
Fixes: 895f7d532c ("crypto: qat - add handling of errors from ERRSOU2 for QAT GEN4")
Signed-off-by: Bairavi Alagappan <bairavix.alagappan@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The field parerr_wat_wcp_mask in the structure adf_dev_err_mask enables
the detection and reporting of parity errors for the wireless cipher and
wireless authentication accelerators.
Set the parerr_wat_wcp_mask field, which was inadvertently omitted
during the initial enablement of the qat_420xx driver, to ensure that
parity errors are enabled for those accelerators.
In addition, fix the string used to report such errors that was
inadvertently set to "ath_cph" (authentication and cipher).
Fixes: fcf60f4bcf ("crypto: qat - add support for 420xx devices")
Signed-off-by: Bairavi Alagappan <bairavix.alagappan@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The memory requested to hold the image data for authentication will
never exceed `ICP_QAT_CSS_RSA4K_MAX_IMAGE_LEN`. Therefore, we can
simplify the allocation by always requesting the maximum size needed for
any image.
Also introduce the following checks:
* Ensure the allocated memory is 8-byte aligned to meet the
requirements of the authentication firmware.
* Prevent overflow when constructing the authentication descriptor.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When building for 32-bit targets, for which ssize_t is 'int' instead of
'long', there is a warning due to an incorrect format specifier:
In file included from include/linux/printk.h:610,
from include/linux/kernel.h:31,
from include/linux/clk.h:13,
from drivers/crypto/tegra/tegra-se-hash.c:7:
drivers/crypto/tegra/tegra-se-hash.c: In function 'tegra_sha_prep_cmd':
drivers/crypto/tegra/tegra-se-hash.c:343:26: error: format '%lu' expects argument of type 'long unsigned int', but argument 6 has type 'ssize_t' {aka 'int'} [-Werror=format=]
343 | dev_dbg(se->dev, "msg len %llu msg left %llu sz %lu cfg %#x",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
...
drivers/crypto/tegra/tegra-se-hash.c:343:59: note: format string is defined here
343 | dev_dbg(se->dev, "msg len %llu msg left %llu sz %lu cfg %#x",
| ~~^
| |
| long unsigned int
| %u
cc1: all warnings being treated as errors
Use '%zd', the proper specifier for ssize_t, to resolve the warning.
Fixes: ff4b7df0b5 ("crypto: tegra - Fix HASH intermediate result handling")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change the representation of fuses in the accelerator device
structure from a single value to an array.
This allows the structure to accommodate additional fuses that
are required for future generations of QAT hardware.
This does not introduce any functional changes.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Introduce the ADF_CSR_WR_LO_HI macro to simplify writing a 64-bit values
to hardware registers.
This macro works by splitting the 64-bit value into two 32-bit segments,
which are then written separately to the specified lower and upper
register offsets.
Update the adf_gen4_set_ssm_wdtimer() function to utilize this newly
introduced macro.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The tfm argument is completely unused and meaningless as the
same stream object is identical over all transforms of a given
algorithm. Remove it.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rather than returning the address and storing the length into an
argument pointer, add an address field to the walk struct and use
that to store the address. The length is returned directly.
Change the done functions to use this stored address instead of
getting them from the caller.
Split the address into two using a union. The user should only
access the const version so that it is never changed.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
